ColdFusion 7 install on OSX 10.4.6 fails

I have tried to install ColdFusion 7 on OSX after the 10.4.6
update and it throws a 500 server error after entering the password
in the Configuration and Settings Migration Wizard page. This is a
developer stand alone install on a 1GB RAM/1.5Ghz G4
powerbook.

The web server is Apache 1.3.33 and it was restarted. I have
attached the coldfusion exception log message. The apache error
when loading states: [warn] Loaded DSO
/Applications/ColdFusionMX7/runtime/lib/wsconfig/1/mod_jrun.so uses
plain Apache 1.3 API, this module might crash under EAPI! (please
recompile it with -DEAPI)

Similar Messages

  • HT1893 After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer.  The printer is working. What do I have to do to be able to scan again?

    After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer.  The printer is working. What do I have to do to be able to scan again?

    Often, you have to download updated vendor software drivers when you switch operating systems. HP doesn't list a C5500 on their web site, however, here's the link to the OS X 10.6 C5540 software.  If you have one of the other C55xx models, look for the updated driver/scan software on their software/driver download section of HP.Com.

  • Problem installing Mac OSX on my new MacBook hard drive...

    Hi,
    i am beside myself again...(i just visited my local Genius bar this afternoon). Any help would be most appreciated! :o)
    i purchased a 2.5 inch SATA Fujitsu 120GB laptop hard drive for my new MacBook. Followed the awesome* instructions on "how to replace/upgrade hard drive", and took out the original Toshiba HD. What the instructions* failed to mention was that i would eventually need to use a Torx screwdriver (star-shaped) to remove the caddy/carriage from the Toshiba HD. Got that the next day and replaced the Toshiba 80GB with my new 120GB Fujitsu drive..., it slipped into place nicely but i did notice that the Toshiba had four short wires protruding out to the right of the contacts, which my new Fujitsu didn't have... hmmmm...?!
    anyways, tried to install Mac OSX on the new drive, booted up with the install disc... went thru' chosing the language (English), agreed to the second step... but when it came time to install, there was NO icon at all in the box where i am asked where i want to install it!!!
    so i go to disk utilities, and see that my Fujitsu HD is indeed recognized, but none of the buttons in first aid are active... so i can't check it.
    i figured that had to do with the four little wires, so i replaced the original Toshiba and made a reservation with Genius Bar to ask for assistance.
    this afternoon, i explained my problem and was told the four wires have NOTHING to do with it... Lawrence (the genius) told me to (actually, first he said Apple does not recommend my doing this... and that i should go to a 3rd party computer store such as Dino to get help!) go back to disk utilities and partition, then erase this drive and then i will see the icon for this drive in the install box.
    Well i did everything i was told to do and... still, there is no icon for my Fujitsu HD! :o(
    I was able to partition, after which there was a disc0 under the Fujitsu drive on the left side of the disk utilities. When i go to system profiler, and click on ATA... it too shows the Fujitsu drive... but i cannot install because there is NOTHING to click on at the installation step! the "continue" button is not active and only the "back" button is actively mocking me!!!
    i know many of you have successfully upgraded your hard drive... what am i doing wrong? Would a different brand work better? I know Seagate is quite popular, and OWC sells a Western Digital version as well as a Hitachi... do those four little wires make a difference? Would the Seagate come with those wires???
    i am going crazy... thanks, and sorry for the long post, just wanted to let you know what i've done!
    blue skies,
    ps. please feel free to email me at [email protected] if you think that would be better! :o)

    Hi,
    ...after getting back from school, my MacBook was STILL in the process of verifying and "supposedly" repairing... since i was gone for over 10 hours, i finally assumed the drive was either defective or just incompatible, and quit disk utility.
    ...this morning i went out and bought a new Seagate 120GB SATA (they didn't have 160GB SATA drives, only 160GB ultra-ATA drives) 2.5 inch HD. This one DID have those four wires to the right of the contacts... (i don't know how important they are), and after changing and exchanging the Toshiba/Fujitsu HDs, it was a breeze putting in the new Seagate drive.
    Erased > patritioned > and sure enough, the icon showed up and the biggest smile showed up on my face as i finished installing! :o)
    I contacted the original seller of my fujitsu hd (it was a 2.5 inch, 120GB, serial ATA notebook drive) and he was kind enough to say "just pack it up and send it back for a refund!" (minus shipping and re-stocking fees of course! :o)
    Just wanted to mention that, the fujitsu hd WAS recognized by disk-utility and at the bottom left of the window it said that the fujitsu was "GUID partitioned"..., so i am still scratching my head as to why it didn't work?!
    I want to thank everyone that offered advice, it was helpful and i feel more comfortable with my MacBook after this trying and very frustrating episode! :o)
    blue skies,

  • How to make a image file from Pre installed Mac osx ? "PLEASE HELP :("?

    hey guys ..Thanks u for the time.
    So i have this eMac which has crashed and i have got may hands on another eMac.. and it works
    ... the only problem is.. I can take my eMac to the working eMac to do Target Mode or any thing...
    So Help me..
    My question is .. Is there a way to make a .DMG image file from pre installed mac osx OR
    Is there a way to may a recovery disc??

    You can use Carbon Copy Cloner to copy everything from the working eMac onto the non-working eMac while the working eMac is running. If your eMac will still do target mode into the working one, you can download the above software, select the booted drive as the source drive, and your eMac's drive as the target, however it is possible this will not work.
    When you say your eMac crashed, what exactly happened?  It is possible that the hard drive in your eMac failed or is failing, so in order to get it running again you would need to replace the hard drive.  On the eMac, this repair is somewhat involved, and you have to be very careful because it exposes the CRT, which has several areas which can be extremely dangerous to touch if not properly handled.  CRTs retain a great deal of voltage, even when unplugged, sometimes for weeks, and they can give you a nasty shock if you touch them in the wrong place.
    Also keep in mind that cloning from the working computer to the non-working computer will ERASE any data that you have stored on that eMac, so if you don't have it backed up anywhere, you may want to attempt that with target mode before proceeding.
    Good luck!

  • HT1338 I installed Mac OSX Snow Leopard 10.6.3 And now my Java is not working, what can I do to fix's this?

    I installed Mac OSX Snow Leopard 10.6.3 And now my Java is not working,what can I do to fix's this?

    Run Software Update to get to 10.6.8 and update Java.

  • I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

    I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

    Which iBook do you have?
    http://support.apple.com/kb/HT1772?viewlocale=en_US
    Which version of the OS is installed, and which version are you trying to install?
    You could try starting up with Startup Manager and see if it will allow you to select the OS X install disc as the startup disk. If so, maybe you can proceed from there. I would recommend repairing the hard drive first since you are evidently having a bit of a problem with it.

  • I want to go back to Snow Leopard but I get "you have to install mac osx.app 23.1.1

    I have a new 21.5 iMac I just purchased July 9 so I was able to download Lion for free under the up-to-date program.  After installing Lion I decided I wanted to go back to Snow Leopard for various reasons. When I restart with the original Snow Leopard DVD that came with my machine and holding the C key down, I get the window for Mac OS X install DVD.  I click the icon to install SL and another window pops up stating "You can't use this version of the application. Install Mac OSX.app with this version of Mac OSX. You have to install Mac OSX.app 23.1.1"  To answer the question before hand....I don't have a time machine backup.

    Thanks for all your help guys. I had trouble with my first install of Lion, it seemed buggy and when I tried some of the suggestions you offered, my machine did not always react the way it should have. I thought that was weird because it's a new iMac, only three weeks old. Pondini pointed me in the right direction and I think Lion is stable now. This worked after a few tries, not sure why I wasn't getting consistent results but it worked eventually.
    1. Shut the computer down.
    2. Hold "command" and "R" and turn on the computer (I believe this is recovery HD from the internet because it wasn't working from my hard drive)
    3. After a few unsuccessful tries, and repeating #1 and #2, I finally got a window to reinstall Lion. This took about an hour to download and after that things went as expected.
    As long as Lion is more stable than it was on my first install, which it seems to be now, I'll just stay with it. After this experience, I would say "make sure you need the features in Lion, and that all your current programs are compatible with Lion before you forge ahead."
    Thanks again

  • When I am re-installing the Mac OSX snow leopard onto an older Mac I run into the window that says select the disk where you want to install Mac OSX but nothing is there to select

    I am trying to re-install the Mac OSX snow leopard onto an older I mac with a new hard drive.  I run into the "select the disk "where you want to install Mac OSX but there is nothing in the window to select. Any advice?

    After you install a new hard drive, you need to boot to another drive to initialize it to MAC OS Extended (journaled) format and create the partition(s) on the drive. You do this using Disk Utility. Otherwise, the mac operating install process doesn't see a formatted disk to install to.

  • Should i install mac osx or keep os 9.2.2?

    Ok when i got my powerbook it had 10.2 on it but it only had 64 megs of ram. It ran sluggish but i did like having osx finally and the never crashing was pretty cool bit it was too slow and i am sure memory played a big part of that. My question is, now i have 320 megs of ram, should i keep os9 or go to x? I have a 10.3 cd which i heard was faster then 10.2. All i use this computer for is the internet and a few older games, should i even bother? With the new memory and os9 it runs very well and i am happy with it. Just having the new system makes it not seem as outdated. I wouldnt worry about upgrading the os til i get a new harddrive anyways, which will most likely be a 40 gig 5400 rpms to replace my stock 6 gig 4200 rpm. Also i have the lombard that wont let u have ram in the upper slot for osx. Can u put ram in the upper slot after the install of osx is done? Thanks in adavance for the answers, you guys are great!
    Powerbook G3 Lombard DVD/CD, 400 MGHZ 6 GIG hardrive, 320 RAM   Mac OS 9.2.x  

    LM,
    Since the Lombard natively supports 10.3 and you want to have OSX on the powerbook, no reason not to update from 10.2 > 10.3. As with any OS upgrade, make sure you have backups so you can return to your previous configuration if necessary...and this includes OSes.
    I would install the 256MB in the lower slot, then test your installed 10.2. If OK, put the 64MB in the top slot and test. If it will not start up properly and/or freezes during use, remove the 64MB module.

  • I'm trying to install Mac OSX on an external drive with my Mac Mini

    A few days ago, I picked up my new Mac Mini. I'm using the install disk included with the Mini in an attempt to install Mac OSX 10.4.5 onto my external hard drive - a LaCie d2 200GB.
    The installer knows the LaCie is there - but it won't let me install it there. I had no problem doing this with my last Mac (Power Mac G4). Does anyone have any suggestions?
    Mac Mini Duo Core 1.66Mhz   Mac OS X (10.4.7)   LaCie d2 Firewire Hard Drive 200GB

    If you are using an Intel mac mini you need to change the partition scheme. Without doing this the Intel Macs cannot boot from the drive.
    To do this you need to open Disk Utility, select your drive (not the partition), then select the Partition tab. In there you'll see an Options… button. Click on it and change the partition scheme to GUID Partition Table. Click OK and then apply the reparitioning.
    Please be aware that by making this change you will be able to boot your Intel Mac from the drive although a PowerPC drive will no longer be able to use the drive as a boot drive.

  • Am unable to install CS5 on mac running yosemite. Tried installing JavaFor OSX, it still doesn't  work. Error message reads "inconsistency in the installer database"

    Am unable to install CS5 on mac running yosemite. Tried installing JavaFor OSX, it still doesn't  work. Error message reads "inconsistency in the installer database"

    remove your caps database.  this shows the location for cs3.  make the obvious changes for cs5.
    Error "...Installer Database is Corrupt..." when you install Adobe Creative Suite 3 products

  • Just installed mac osx snow leopard upgrade and connected my printer to it too, and realized I have no sound anymore

    Just installed mac osx snow leopard upgade and connected my printer too, and realized I have lost sound!   Can anyone help?

    In case I misunderstood, did you mean that the 10.6.3 version of Snow Leopard was the upgrade?  If so you need to update via 10.6.6 to 10.6.8.  These updates can correct minor system upsets.  
    And ... did you also repair permissions both before and after you upgraded.   You should do this when you progress via 10.6.6 to 10.6.8 too.

  • MacBook Pro 13 " going slower in performance after Installing LION OSX

    Hey Guys ,
                        I had noticed some problems in my MacBook Pro 13" which I bought in the MID of 2011 ( i5 processor ) , I had purchased and installed LION OSX and observed after installing that my Backlite ( Keyboard ) dont get on when I start up at the LOG IN , which used to work in SNOW LEOPARD .
    Booting takes SO SO SO long as when comapared with the previous OS .
    Heating Problem is also a must to mention .
    If you guys know how to reduce these problems please help me out !
    Thank You .

    I'm curious if you ever found a solution for this issue.  I recently purchased the SanDisk Extreme II 480GB, replacing my OWC Extreme Pro 240GB.  The OWC never experienced the "slow to wake" issue whereas the SanDisk drive does, consistently.  To make sure I'm having the same symptoms, this is what happens to me:  Put the mac to sleep (either manually or letting it do it on its own, waiting for the led to pulse showing that it is asleep), then wake it up (press a key on the keyboard), the logon screen shows almost immediately but as soon as I try to type the pinwheel/beach ball shows up, I wait between 20 and 30 seconds and then I'm able to type and all is well.
    I contataced SanDisk and their support was horrible.  They simply told me "contact MAC for this issue" (no joke, not "contact Apple" but "contact MAC", in all caps).  I explained that it works fine with the OWC drive just not the SanDisk.  They replied with another article showing that all macs have trouble waking from sleep (not true). I replied again indicating that I've never had this issue with any of my 3rd party drives, only this SanDisk.  Then the replied simply stating that all mac's have issues with 3rd party hard drives when waking from sleep.  At this point I threw a fit and yelled at my screen, even though it wasn't my screens fault.
    In any case, their support has not been willing to do any actual troubleshooting.  I'd love to return it and I might have to - but as you stated, it's annoying to have this issue but the performance is fine the rest of the time.
    Thanks for any input you have.
    Bryan

  • Quicktime Player states "You can't open the application QuickTime because the Classic environment is no longer supported."  I just installed Mac OSX Snow Leopard.  What do I need to do?

    I just installed Mac OSX (10.6.8) and can not get Quick time player to work.  When I go to the Apple site to download a version that will work, it states that Quick Time Player automatically comes with OSX.  What do I need to do to use Quick Time Player with 10.6.8

    Mac OS X 10.6 includes QuickTime versions 10.0 and 7.6.3. The QuickTime 7 player will only be present if a QuickTime Pro key was present at the time of installation, or if specified as part of a custom install, or individually downloaded:
    http://support.apple.com/kb/dl923
    Snow Leopard update 10.6.4 included an update to 7.6.6 (if installed). You can install it from the above link  even though it says for 10.6.3. It's the same version of QuickTime Player 7.6.6.
    (Only QuickTime Player 7.6.3 or 7.6.6 can be updated to "Pro".)

  • Installing Mac OSX Leopard Server 10.6 on a Mac Air

    Hi
    Im trying to install Mac OSX Server 10.6 on a Mac Air which have Lion developer preview 4 on it, i try to install from
    a .dmg file thats stored in the downloads folder when it runs it give me a message "resturt to begin installation" with a
    restart button, i click it and then computer restarts and nothing happens why ?
    also the server file is big 7 GB so i failed to burn it on dvd or copy to external hard disk and install from there

    You will want to use a external double-layer (DL) DVD disk that you've recorded, or use an external disk configured to boot the distro.
    Also make a full backup of your boot disk before you load this, as there is no "downgrade" option to get back to whatever version of Snow Leopard client you might be using on the box.
    Please (also) read the HT4313 support article.
    And for completeness...
    This particular configuration isn't supported by Apple.
    Mac OS X Server doesn't "like" DHCP addressing, and that can be common on portables.

Maybe you are looking for