ColdFusion 8 - Windows 2003 R2 w/ IIS6

Installed ColdFusion 8 several times on a Windows 2003 Server
(Enterprise Edition r2) running IIS 6 and I'm unable to get the
admin console to come up after the installation. The system was
configured during the installation to work with "All" IIS web
applications on the machine. I have granted "full control" to the
cf_root/runtime/lib/wsconfig directory to local users IIS_WPG &
IUSR_xxxxxx and I’m still getting the following error:
HTTP Error 401.3 - Unauthorized: Access is denied due to an
ACL set on the requested resource.
The log file after the installation indicated no errors. Is
there anything else I can try to resolve this opportunity? I
installed the development edition of ColdFusion 8 and I had not
issues whatsoever on a Windows XP machine, SP2. Please help.... I
have three servers to get up and running soon....

by default the admin console would be in
inetpub\wwwroot\cfide\administrator - did you correct the
permission there?
Incidentally on a clean install on Windows I've never seen
any permissions issue when trying to load the administrator
assuming a default configuration of CF.
You're not installing it on a 64 bit server are you by any
chance?

Similar Messages

Jrun 3.0, windows 2003, IIS6

I am trying to install Jrun version 3.0 service pack 2a,
version 3.024.11614 on a windows 2003 server running IIS6.... It
all appears to install fine but when trying to access the default
web page, I receive error: YOU ARE NOT AUTHORIZED TO VIEW THIS
PAGE.

Not a supported configuration.
See
http://www.adobe.com/support/documentation/en/jrun/4/releasenotes_4_updater4.html
"Windows support - JRun supports Windows 2003 and IIS 6 since
Updater 3"

cfdocument and cfchart stopped working when moved to Windows 2003/IIS6

We just moved our content to a new server: from Windows 2000 to Windows 2003 (IIS6).
We are using Cold Fusion MX 7,0,2,142559.
Everything works properly after the move except:
1. <cfdocument> (any, the simpliest one) hangs producing error:"The document has no pages. null "
2. <cfchart> crashes producing error: "Invalid attribute: autoAdjust null"
What can it be? Where should we look? Is it some Windows 2003 feature/problem/blockage? Or does it look like Cold Fusion was not installed properly?
Any Hot Fixes are required?
Any ideas are welcome!!!

I would avoid installing 7.0.1 hotfixes on an 7.0.2 installation. The 7.0.2 release notes state that "It also includes all previous ColdFusion MX 7 hot fixes that have been released to date, eliminating the need to install multiple hot fixes and patches."
CF 7.0.2 Release notes
http://www.adobe.com/support/documentation/en/coldfusion/mx702/cf702_releasenotes.html
You might try installing the ColdFusion MX 7.02 Cumulative Hot Fix 3 or the CFDocument Cumulative Hot Fix.
ColdFusion MX 7.02 Cumulative Hot Fix 3
http://kb2.adobe.com/cps/402/kb402465.html
ColdFusion MX 7.02 - CFDocument Cumulative Hot Fix
http://kb2.adobe.com/cps/402/kb402093.html

Crystal Ras 9 on Windows 2003 Server, IIS6.0, single threaded?

We have just migrated from Windows 2000 server to Windows 2003 Server over the weekend. We ran into an issue with Crystal Ras 9.0 where the server serving up reports slower that our previous box. We are using IIS 6.0 and .net 2.0 framework with 1.1 installed for backward compat on our some of our old legacy codes. From what our developers can tell, the issue seems to be Crystal Ras queuing up the request and process them one at a time. That didn't happen before the migration. In fact, we also saw it working in our test environment before the migration. Once the pool is filled no further reports are generated which causes all report to stop which also starts to hang our server. They symptoms is worst under heavy user load. We tested with 6 simultaneous users and all 6 are done at the same time no matter the size of the report. Even the one that fail with an error message came up at the exact same time.
Are there anyway we can adjust the IIS pools and or Crystal Ras to support additional threads? We are connecting to Windows 2008 SQL Server EE. Any suggestions and or help is appreciated. I cannot find any references that would help us diagnose this further.
Also, if you can also detail the cost to buying a phone case, that would be helpful as well.
Thanks
-atiwat

Since you are not changing the version of RAS, I am not sure why the queuing would be different on different Operating Systems? You may want to check on how the queuing is setup on the WIN 200 server and duplicate that on the WIN 2003 server. Also, RAS has a limited number of licenses out of the box. Ensure that you are using the same license on both environments.
Re. phone support. You can obtain a phone case here:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
However, please note that support of version 9 products terminated years ago, so you will not be able to get support for your version. To get phone support, you will have to upgrade to a supported version of RAS (XI r2 at minimum).
Ludek
BTW.; Windows 2008 SQL Server EE came way after RAS / CR 9 and has thus not been tested in this environment...

IISProxy and Windows 2003

We are in need of a reverse proxy solution for WL that works with Windows 2003
IIS6. IISForward/IISproxy is not supported and doesn't work. We have tried several
third party products but they all fail relating to how WL manages cookies. Any
Suggestions?

I got it working by following the steps that Patrick Montelo sent, also allow ISAPI extentions.
I am running Weblogic 8.1 SP3 if that helps.
-------------From Patrick---------------
2003 is locked down out of the box, try this:
1. Open IIS manager
2. Go to WebService Extensions folder
For ASPs:
1. Select Active Server Pages
2. Click the allow button
For JSPs:
1. Click "Add a new web service extension"
2. Type in a name like "Weblogic pages"
3. Click "Add" button
4. Browse to your iisproxy.dll file
5. Select "Set extension status to allowed"
6. Click "Ok"
-----------------------------------------------

Problem opening ODBC data source in Windows 2003

I am having difficulty opening a ODBC data source in SQL
Server 2000 running on Windows 2003 using ColdFusion MX7 (it works
cleanly on the same database on windows 2000 server). Anyone has
any ideas.

Here it is, there is an issue with our Search functionality with the new SDN:
Symptom
When setting location on a Crystal Reports XI Report using the Progress OpenEdge ODBC Driver in Crystal Reports 2008 or Crystal Reports 2011 get “Some tables could not be replaced, as no match was found in the new data source. Please specify the table required for any unmodified tables.”
Environment
Crystal Reports 2008 or 2011
Progress OpenEdge ODBC Driver
Reproducing the Issue
Open a Crystal Report created in CR XI Report using the Progress OpenEdge ODBC Driver in Crystal Reports 2008 or 2011
Set location to a new ODBC Data Source
Get error "some tables could not be replaced, as no match was found in the new data source. Please specify the table required for any unmodified tables.”
Cause
Crystal Reports XI only creates aliases for tables with special characters or duplicate names.
Crystal Reports 2008 introduces a change which requires aliases for all tables.
Aliases are not created when doing a Set Location on the whole data source.
If a Customer has hundreds of reports they cannot set location of each table and fix the aliases.
Resolution
Upgrade to Crystal Reports 2011 Support Pack 02 or higher
Under registry key [HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Crystal Reports\Database\ODBC] create string UseTableNameAsAlias and set it to PGPRO1019.DLL, PGOE1022.DLL. Registry file is attached.
Keywords
Set Location
Progress ODBC
Crystal Reports 2008 2011

Windows 2003 SP2 servers migrating from IIS 6.0 to IIS 7.5 without upgrading to Windows 2008 R2

I have 3 Windows 2003 SP2 servers running IIS 6.0 and my client wants to upgrade to IIS 7.5 without having to upgrade the OS to Windows 2008 R2. Is this possible?
Thanks

No I'm afraid not. The full versions of IIS depend on the OS, so IIS6 on 2003, IIS7 on 2008, IIS7.5 on 2008 R2.
The Express version of IIS can be installed on 2003 but that's for developers only so no use in your situation.
Also worth nothing in terms of upgrading, unless your 2003 installation is 64-bit then you can only do an in place upgrade to 2008 IIS7. There's no 32-bit option with 2008 R2, and no way to do an in place upgrade between 32-bit and 64-bit, so if you really
need to upgrade to IIS 7.5 then your only option would be to start with a new install and then migrate the websites from one server to another.

CF8 on Windows 2003 64-bit (virtual?)

We are trying to bring up a new Windows 2003 64-bit server,
running both ColdFusion 8 and .NET Runtime 2.0
We are having multiple problems, and not much of anything is
running, and I am beginning to wonder whether there is a problem
with 32-bit CF8 and 64-bit .NET trying to run on IIS 6 at the same
time?
Does anyone have this kind of setup sucessfully installed?
Would like to get a few pointers.
Alternately, thinking about running a 32-bit virtual server
on the 64-bit OS, and installing CF8 in that virtual server.
Does this make sense for a PRODUCTION server?
Rick Colman

ColdFusion 8.01 is in beta currently and it has 64 bit
windows support. Why not give it a try at
prerelease.adobe.com?

Migrating to Windows 2003

Hello all,
I'm seeking for expert advice on the migration issue. We are
looking to Migrate from Windows 2000 to Windows 2003, and we are
running ColdFusion MX 7.0.1, enterprise edition, does anybody see
any issues with that, or is it going to be a smooth transition !
Thanks,
Jyoti.

You dont need the nwclient or edir installed on the windows 2003 server for
an mta/poa to function? (ive never done groupwise server components on
windows before but I am in need of doing so currently).
http://abeNd.org - Novell News for IT Professionals
"Gregg A. Hinchman" <[email protected]> wrote in message
news:[email protected]. .
> Pretty straight forward. Shut down the domain MTA, make sure no file
> locks
> on db's, copy the domain directory over to the windows disk -make sure NOT
> to have it run on c:\ -then just install the windows agents and point the
> MTA config file to the domain directory -and you are done.
> --
>
> Take Care.
>
> Gregg A. Hinchman
> Consultant
> [email protected] ( mailto:[email protected] )
>
> A Novell Consulting Partner
> 317.329.0288 Office
> 413.254.2819 eFax
>
> "Courage is doing what is right."
>
> "Do not be bound to any doctrine, theory or ideology, even Buddhist ones.
> All systems of thought are guiding means, not absolute truth." Thich Nhat
> Hanh, Vietnamese monk.
>
>
>
>>>> On 5/21/2007 at 12:03 PM, in message
> <4pj4i.4281$[email protected]>,
> Shabu<[email protected]> wrote:
>> Hi,
>> We have a Primary GroupWise domain server that runs MTA and also
>> secondary
>> domain server that runs MTA and POA. We are planning to migrate our
>> Primary domain server to a Windows 2003 server. What lists of things we
>> need to be aware off when we do Primary domain migration to a Windows
>> 2003
>> Advanced server?

IE Integrated authentication not working with Windows 2003 clients

Hi,
I have a website on a windows 2008 R2 server on IIS. It is accessible through the Windows 7/windows 2008 internet explorers with integrated authentication. when the same user logged in a windows 2003 server and try to open this site, popping up the username/password
prompt. Even if giving the right username/pw, it doesnt accept.
IE integrated authentication is enabled in the client. Is there any restriction in windows 2003/xp clients to use integrated authentication on a site published in IIS7 over a windows 2008?
Thanks for any help.

This may help
http://forums.iis.net/t/1167697.aspx?Making+Windows+Authentication+work+on+IIS7+it+worked+on+IIS6
Generally www.iis.net is a good place for solving similar task and problems.
Regards
Milos

Support package / add on import error in DB2 V9.1 / windows 2003 system

Hi
I have installed ERP 6.0 IDES version in Windows 2003 server with DB2 LUW 9.1 / FP5.
I have selected "Row Compression" and "Deferred Table Creation" during installation.
Now when I am importing add on BI Content 7.03, I am getting error during Movename tabs phase.
Error in phase: IMPORT_PROPER
Reason for error: TP_STEP_FAILURE
Return code: 0008
Error message: OCS Package ALL, tp step "6", return code 0008
The error message in the file D:\usr\sap\trans\log\P090113.IDS is as follows,
2 ETP301
3 ETP361 "96" Shadow-Nametabs activated, DDL executed
2 ETP362 "6" Shadow-Nametab activations failed
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2009/01/13 02:57:51")
2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2009/01/13 02:58:07")
2 ETP301
1 ETP172 MOVE OF NAMETABS
1 ETP110 end date and time : "20090113025807"
1 ETP111 exit code : "8"
1 ETP199 ######################################
I have read some notes it may be due to "Row compression" and "Deffered table creation" option in DB2. Please help me in resolving this issue if it is DB2 related.
Regards,
Nallasivam.D

Hi,
Please find the real error message which I found in the same log file. This is a new installation.
System configuration details:
ERP 6.0 IDES SR3 + Windows 2003 enterprise server SP2 + DB2 V9.1 / FP5
BASIS and ABAP support pack level: (700) 13.
Error message:
3 ETP399 INDEX IN "IDS#BTABI"
3 ETP399 LONG IN "IDS#BTABD COMPRESS YES"
3 ETP399
2WETP000 02:53:26: Retcode 1: error in DDL statement for "/OSP/T_REPINFO                " - repeat
2EETP345 02:53:38: Retcode 1: SQL-error "-107-SQL0107N The name "IDS#BTABD COMPRESS YES" is too lo
2EETP345 ng. The maximum length is "18". SQLSTATE=42622" in DDL statement for "/OSP/T_REPINFO
2EETP345             "
2 ETP399 -
DB-ROLLBACK() -
3 ETP399 INDEX IN "IDS#POOLI"
3 ETP399 LONG IN "IDS#POOLD COMPRESS YES"
3 ETP399
2WETP000 02:54:05: Retcode 1: error in DDL statement for "/SAPPO/CMP_ASG                " - repeat
2EETP345 02:54:17: Retcode 1: SQL-error "-107-SQL0107N The name "IDS#POOLD COMPRESS YES" is too lo
2EETP345 ng. The maximum length is "18". SQLSTATE=42622" in DDL statement for "/SAPPO/CMP_ASG
2EETP345             "
2 ETP399 -
DB-ROLLBACK() -
2EETP334 02:54:17: error in DDL, nametab for "/SAPPO/CMP_ASG" not activated
3 ETP399 IN "IDS#POOLD"
3 ETP399 INDEX IN "IDS#POOLI"
3 ETP399 LONG IN "IDS#POOLD COMPRESS YES"
3 ETP399
2WETP000 02:54:17: Retcode 1: error in DDL statement for "/SAPPO/CSCRN_HDR              " - repeat
2EETP345 02:54:29: Retcode 1: SQL-error "-107-SQL0107N The name "IDS#POOLD COMPRESS YES" is too lo
2EETP345 ng. The maximum length is "18". SQLSTATE=42622" in DDL statement for "/SAPPO/CSCRN_HDR
2EETP345             "
2 ETP399 -
DB-ROLLBACK() -
2EETP334 02:54:29: error in DDL, nametab for "/SAPPO/CSCRN_HDR" not activated
3 ETP399 INDEX IN "IDS#POOLI"
3 ETP399 LONG IN "IDS#POOLD COMPRESS YES"
3 ETP399
2WETP000 02:54:29: Retcode 1: error in DDL statement for "/SAPPO/F_ASG                  " - repeat
2EETP345 02:54:41: Retcode 1: SQL-error "-107-SQL0107N The name "IDS#POOLD COMPRESS YES" is too lo
2EETP345 ng. The maximum length is "18". SQLSTATE=42622" in DDL statement for "/SAPPO/F_ASG
2EETP345             "
2 ETP399 -
DB-ROLLBACK() -
2EETP334 02:54:41: error in DDL, nametab for "/SAPPO/F_ASG" not activated
Regards,
Nallasivam.D

Installation problem on Windows 2003

Hi All,
I have installed the saprfc extension on my laptop for testing purposes.
Definitions of my laptop: Windows XP, IIS 6, PHP 4.4.2, SAP GUI 640
Everything works fine and I can access the SAP through the web server on my laptop without any problem.
Now, after finishing my tests I installed my web application on a real production server with the following definitions: Windows 2003 server, IIS 6, PHP 4.4.2
As you can see the two differences are the operating system and the fact that I do not have a complete SAP GUI installation on the server I only located the librfc32.dll under the windows library.
My problem is that I get the message that the php_saprfc.dll extension cannot be loaded (I edited the php.ini).
Doe anyone have any idea why?
Thanks,
Roy

Hi,
I have an installation with my laptop WIN2003 server with apache web server instead of IIS, without problems.
Are you sure that in your php.ini is all OK?
Have you tried to copy the WIN2003 php.ini on your laptop and try to load saprfc.dll?
Lorenzo

Windows 2008 R2 SP1 (64bit) shared folders no longer work with Windows 7 Pro but do work with WindowsXP & Windows 2003

As of last week, our Windows 7 Pro workstations can not map or browse the Windows 2008 Server shares. They can ping the Windows 2008 server. The Windows 7 Pro machines can still access the Windows 2003 Server Shares. The older workstations running Windows
XP can still map to the both the Windows 2003 & Windows 2008 Servers. All the servers can browse to each others shared folders (2 windows 2003 server & 1 windows 2008 server).

Ok, now you're down to network or permissions issues. An unedited ipconfig /all
of server and problem workstation may help. You could also try setting up some auditing.
https://technet.microsoft.com/en-us/library/dn311489.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Migration from Oracle 9i 32 bit to Oracle 10G 64 bit on Windows 2003 Server

I am working on migrating Oracle 9i 32 bit to Oracle 10G 64 bit on Windows 2003 from Old server to new server. We have db around 500 GB and 3 schemas. I installed Oracle 10G on new server, created tablespaces, schema's blah blah and now doing export and import at schema level from old server to new server.
Import is taking more than 4 to 5 hours on new server. My manager is saying, window time is bit longer and he wants me to try possiblities to make this process faster. Can some one help me on this, to use the best possible method to complete this process faster?
Will below step work, if I try?
If I install, oracle 9i and 10g both on new server in different home directories and take the hot backup from old machine and restore on new machine in 9i home directory and use the upgrade configuration assistant from 10g and do the upgrade? Pls advice.
Thanks in advance,
Hari babu
Edited by: user6367891 on Mar 2, 2010 5:28 AM

It looks good.
I have one question in below steps:
To migrate an Oracle9i or older database to an Oracle Database 10g Release 1 (10.1) database for 64-bit Windows:
1 Perform steps 1 - 11 in "Migrating an Oracle Database 10g Release 1 (10.1) Database".
2 Shut down the database on the 64-bit computer:
SQL> SHUTDOWN IMMEDIATE;
3 Start the database migration:
SQL> STARTUP MIGRATE;
4 Migrate the database as described in Chapter 3, "Upgrading a Database to the New Oracle Database 10g Release" in Oracle Database Upgrade Guide.
In step 4, it says, migrate database as described in chapter 3. In chapter 3, it says, to do the upgrade the process using dbca or manually. Pls confirm whether do the upgrade process after issuing startup migrate or not.
Thanks in advance.

How to Install 64-bit "Generic / Text Only" print driver on a 32-bit Windows 2003 Server?

Hi All,
In a nutshell, I need to Install the 64-bit Generic / Text Only print driver on a 32-bit Windows 2003 Server’s “Generic / Text Only 32-bit print queue.
The problem is that there is no Driver-Disk to get the drivers. I’ve been able to isolate 14 files related to the 64 bit drivers from a Windows 7 x64 computer and copy them to a temp folder on the Windows 2003 x32 server. When I try to add the 64 bit driver
to the Windows 2003 x32 server, it wants a *.inf file, which I don’t have and can’t find.
Because Microsoft will no longer support Windows XP, my client is replacing all of their Point-of-Sale Windows XP x32 systems with Windows 7 x64. They use Terminal Services (Remote Desktop) to connect to a Windows 2003 x32 server to use the POS system. The
POS software redirects LPT1 back to the local Generic / Text Only printer. This works great for XP x32.
When we use the Terminal Services POS software on the new Windows 7 x64 system, none of the labels print out because it’s redirected in 32-bit back to the local Windows 7 x64 Generic / Text Only 64-bit printer.
This will be a huge issue for me if I can’t get this to work.
Thanks in advance for any suggestions and help! -Rob

those may be helpful...
http://social.technet.microsoft.com/Forums/en-US/a129f49a-0216-41f0-b190-3efb46fbb8ac/generic-text-only-driver-on-windows-2008-server-r2?forum=winserverprint
http://blogs.technet.com/b/yongrhee/archive/2009/09/14/how-to-add-64-bit-print-drivers-on-32-bit-windows-server-2003-or-windows-server-2008-print-server.aspx
Best,
Howtodo

ColdFusion 8 - Windows 2003 R2 w/ IIS6

Similar Messages

Maybe you are looking for