ColdFusion 9 - The event viewer gives me this error.

The event viewer gives me this error.
Name of the application causing the error: JNBDotNetSide.exe Version: 5.10.3764.40502, Time Stamp: 0x4bd1305c
Name of the module causing the error: KERNELBASE.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdfe0
Exception Code: 0xe0434352
Offset error: 0x000000000000aa7d
Process ID is causing the error: 0x688
Time to start the application causing the error: 0x01cbcf4664439dd5
Faulting application path: C:\ColdFusion9\jnbridge\JNBDotNetSide.exe
The path module is causing the error: C:\Windows\system32\KERNELBASE.dll
Report ID: c6cbf773-3b39-11e0-951f-be182a536a23

Maria --
To address this problem, please see the following links:
http://www.adobe.com/support/documentation/en/coldfusion/901/cf901install.pdf
http://blogs.adobe.com/coldfusion/2010/11/19/coldfusion-9-0-1-and-net-integration/
Regards,
Wayne Citrin
JNBridge

Similar Messages

Error showing on the Event Viewer

Hello,
I have installed the Oracle9iAS at win2k SP3, i have this error when i reboot my server where this showing in the event viewer log.
The OracleOra9ias_homeWebCache service hung on starting.
But when i go to the services, it show this service started. But it give error on the server.
Do you have any idea to solve this problem??
Thanks
Regards,
mingjade

Hi Jordan,
Actually i can't solve that problem. So, i formated the server since is not on production yet. So it run fine now.
Thanks
Regards,
Ming Jade

How do you split clips in the event viewer in iMovie '11?

I'm using iMovie '11 and have imported a very long movie (over an hour from VCR Tape) that I want to split into multiple events, however the "Split Clip" option is grayed out. How can I split a large event into smaller events?

I have discovered a round-about way to split large events from comments in this forum, so apologies, and or thanks to other posters.
You can split events by deleting (and discarding) a single frame at the point where you want to split the two clips. It's processor intensive (takes a while to do), but it works.
1.) In the Event Viewer, click to select where you want to split the event.
2.) Drag the yellow handles to make the selection as small as possible (1 frame?). If you drag the thumbnail display slider to the left to show only 1/2 second intervals, it helps when selecting a single frame.
3.) Right click and select "Reject Selection". The clip is now split.
4.) When you've completed all of your clip splitting, select "Show: Rejected Only" at the bottom of the Event Viewer to show all of the rejected frames.
5.) Click on "Move Rejected to Trash". This operation could take a while.
That should be it.
Hope this helps.

Application Nividia Stream error and warning in the Event Viewer Windows 8.1

Have found the following repeating error and warning in the Event Viewer Windows 8.1 64 bit reg.the application Nividia Stream:
1. The error :
"Can not find the description of event 2001 identification from
the source NvStreamSvc.
Either the component causing this issue is not
installed in the local computer or installation is broken. You can install or
repair the component in the computer.
Information to the event :
NvStreamSvc
Failed continue stopping [6] "
2. The warning :
"Can not find the description of event 2002 identification
from the source NvStreamSvc.
Either the component causing this issue is not
installed in the local computer or installation is broken. You can install or
repair the component in the computer.
Information to the event
NvStreamSvc
SSAU process ID 7820 did not exit, Termination.
[6]”
I would appreciate the advice how to fix it.
Thanks and best regards,
Ewa

Hi,
Thanks for your reply.
Have the lastest updated Nividia driver : version 347.88 - shall I uninstall and install again ?
Shall I make express installation /as usually/ or advanced ?
Reg. Nividia Stream service - shall I disable this service in services.msc ?
The software - now have Nividia GeForce Experience updated to the version 2.4.1.21 on 30th
March.
Would appreciate your further assistance and help.
Thanks and best regards, Ewa

How does one clear Custom Views (Administrative Events) in the Event Viewer?

Windows Logs and Applications and Services Logs have a "clear log" option; however, I am puzzled how to edit/delete Administrative Events?Eighter from Decatur, county seat of Wise (of course it's in Texas)

Ronnie Vernon said: Hi p010ne
The Custom View / Administrative Events is a compilation of all the other event logs in the Event Viewer.
Entries in this log will be removed when the log where the event originated from is cleared.
Hope this helps.
Ronnie Vernon MVP
I thought that was the case; however, I cleared all the other logs! This is an example of an entry in this log: Log Name: Microsoft-Windows-Dhcpv6-Client/AdminSource: Microsoft-Windows-DHCPv6-Client
Date: 1/17/2009 7:52:33 AM
Event ID: 1001
Task Category: Address Configuration State Event
Level: Error
Keywords:
User: LOCAL SERVICE
Computer: Windows7
Description:
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x000129F558C5. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
   <Provider Name="Microsoft-Windows-DHCPv6-Client" Guid="{6A1F2B00-6A90-4C38-95A5-5CAB3B056778}" />
   <EventID>1001</EventID>
   <Version>0</Version>
   <Level>2</Level>
   <Task>3</Task>
   <Opcode>74</Opcode>
   <Keywords>0x8000000000000000</Keywords>
   <TimeCreated SystemTime="2009-01-17T13:52:33.858398400Z" />
   <EventRecordID>202</EventRecordID>
   <Correlation />
   <Execution ProcessID="1088" ThreadID="864" />
   <Channel>Microsoft-Windows-Dhcpv6-Client/Admin</Channel>
   <Computer>Windows7</Computer>
   <Security UserID="S-1-5-19" />
  </System>
  <EventData>
   <Data Name="HWLength">6</Data>
   <Data Name="HWAddress">000129F558C5</Data>
   <Data Name="StatusCode">121</Data>
  </EventData>
</Event>
When I search for "Microsoft-Windows-DHCPv6-Client" I do not find that file?
OK, I found the entrys in the Microsoft section (DHCPv6-Client) and am able to clear them there!
Eighter from Decatur, county seat of Wise (of course it's in Texas)

Changing the Event View Field Display Order on a Calendar

We'd like to change the display of a calendar event to show the Title on top and the time below. This is how it currently looks below. Is there a way to change it?
Orange County District Attorney

Hi,
According to your post, my understanding is that you wanted to change the Event View Field display order on a Calendar.
You need to insert the code below into a Content Editor Web Part.
<script type="text/javascript" src="http://code.jquery.com/jquery-1.10.2.min.js"></script>
<script type="text/javascript">
function changeCalendarOrder() {
$(".ms-acal-sdiv").each(function () {
var arr = $(this).find('div').toArray();
var temp;
temp = arr[0];
arr[0] = arr[2];
arr[2] = temp;
$(this).html(arr);
//alert($(this).html());
_spBodyOnLoadFunctionNames.push('calendarEventLinkIntercept');
// hook into the existing SharePoint calendar load function
function calendarEventLinkIntercept() {
var OldCalendarNotify4a = SP.UI.ApplicationPages.CalendarNotify.$4b;
SP.UI.ApplicationPages.CalendarNotify.$4b = function () {
OldCalendarNotify4a();
changeCalendarOrder();
</script>
The result is as below:
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Intranet DOWN!! Help, please!! I installed SP2010 SP2 and the Configuration Wizard Stopped at Step 5. I found errors 100 and 104 in the Event Viewer!

Hi,
Help, please.
Intranet DOWN!! Help, please!! I installed SP2010 SP2 and the Configuration Wizard Stopped at Step 5. I found errors 100 and 104 in the Event Viewer!
Acording to these entries:
http://blogs.technet.com/b/sbs/archive/2011/08/19/two-commands-you-should-always-run-first-when-troubleshooting-companyweb.aspx
https://translate.google.com/translate?hl=en&sl=auto&tl=en&u=http%3A%2F%2Fwww.techtask.com%2Fsharepoint2010%2Ffehlermeldungen-nach-sharepoint-2010-service-pack-1-installation%2F
In order to fix this, I need to run:
PSConfig.exe -cmd upgrade b2b -force -inplace -cmd application content -install -cmd install features
But SP doesn’t recognize “b2b”. is the the content or config db?
Thanks in advanced

Your Syntax is bad. b2b should follow -inplace, it doesn't make sense anywhere else in the command. Have a look here for more detail:
https://technet.microsoft.com/en-us/library/cc263093%28v=office.14%29.aspx?f=255&MSPPError=-2147217396

Hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem pleas

hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem please
and this is an pic for the problem

There is some troubleshooting for 0xE8 error codes on this page : http://support.apple.com/kb/TS3221 - you could see if anything on that page fixes it

How do you change the Event Viewer archive location in Server 2008 R2?

We're wanting to redirect the security and system event viewer logs to the D:\ on a Server 2008 R2 box
We've got the current logs to save there, however all archived system/security logs are still being saved on the c:\ in their default location in %windir%\system32... and killing the OS partition.
I can write something up in PoSh and schedule it, but I'd rather use any built-in capabilities first...
I've taken a peek in the HKLM\Services\CurrentControlSet... hive where the event viewer behavior is configured and do not see an option to set a path for the archive location...

Unfortunately, you cannot customize the location of archived event logs in Windows. The logs will always be archived to %windir%\system32\Winevt\Logs\Archive-xxxxxx
There'd be some scripts can help you automatically archived logs to another location. You can find them here: http://gallery.technet.microsoft.com/scriptcenter/site/search?f%5B0%5D.Type=RootCategory&f%5B0%5D.Value=security
Regards,
Zhang
TechNet Subscriber Support
If you are
TechNet Subscriptionuser
and have any feedback, please send your feedback here.

New computer win 8.1 pro, installed my creative Suite 4 Design premium but it shuts down when I try to use any of the programs and gives me an error code 147:20. How can I fix this?

New computer win 8.1 pro, installed my creative Suite 4 Design premium but it shuts down when I try to use any of the programs and gives me an error code 147:20. How can I fix this? Is this a conflict with win 8.1 pro?

You need to adjust your security stuff/ permissions and possibly use compatibility modes. It means that your licensing service is being blocked/ shut down.
Mylenium

HT201250 My Time Machine is not backing up and gives me this error report, 'The backup disk image "/Volumes/Data/Valarie'siMac.sparsbundle" is already in use. Time machine could not complete backup. Can anyone help me?

My Time Machine is not backing up and gives me this error report:
The backup disk image "/Volumes/Data/Valarie'siMac.sparsbundle" is already in use
Time Machine could not complete backup
Can anyone help me?

Look at the discussion on the following forum:
https://discussions.apple.com/thread/3882138?start=0&tstart=0
The responses given there may help.

TS1424 Whenever i purchase or download an app on the app store , it always gives me this error message " unable to purchase at this time, please try again later"

Whenever i purchase or download an app on the app store , it always gives me this error message " unable to purchase at this time, please try again later"

JUst experienced the exact same problem after changing password.Getting same message. Hope someone has an answer for this.

IPS Clock in the event viewer

Hi,
i have set up the clock on my AIP-SSM 20, if i do a show clock it will display the correct time, but still in the event viewer the sensor UTC time is different, how can i have the correct time in the event viewer ? i have realized also that if i want to try something and change the time , the sensor has to reset!?

No its not the bug, the event viewer on the sensor will only show UTC time, I called TAC and they said the same thing. If you install IEV and click on the alert and look for details you will see the local time.
I wish it should show the local time in the IPS sensor event viewer.

When i connect my iphone to the computer it gives me this message "ITunes could not sync contacts to the Iphone "my name" because the sync server failed to sync the iphone. whats the problem

when i connect my iPhone to the computer it gives me this message "ITunes could not sync contacts to the iPhone "my name" because the sync server failed to sync the iPhone. what is the problem?

What type of computer?
Mac: Sync Services: Advanced troubleshooting for contact and calendar syncing
Windows: Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
The following previous discussion may also help: Re: sync server failed to sync the iphone

How use page Fragments(give me this error symbol : class Hyperlink )

hi master
sir
i am try to this link sample for page fragments
http://developers.sun.com/jscreator/learning/tutorials/2/pagefragments.html
every setp is right but when i use this code
Hyperlink homeLink = navigationFragmentBean.getHomeLink();
this line give me error
see error
symbol : class Hyperlink
location: class fragmentexample.Page1
Hyperlink homeLink = navigationFragmentBean.getHomeLink();
1 error
please give me idea how i remove this error
thank's
aamir

hi master
sir use mysql database
I have three textfield in my page and one button.
All texttfidld are bound with datasourceprovider or bound with mysql and I use normal code in button event
getMfatableDataProvider().cursorNext();
also I drop page fragment box tool and create new fragment in my application but when I run my page and click the button first record move to next record and again I press button then page give me this error
when I run my project then in browser address show this
http://localhost:29080/mfamove/
first time when I press button record move to next record and browser show this address
http://localhost:29080/mfamove/faces/Page1.jsp;jsessionid=12a66ea53657ffffffffcb77c9939bc5aa0
second time I press button then browser show this address
http://localhost:29080/mfamove/faces/Page1.jsp
and page show this error
Description: An unhandled exception occurred during the execution of the web application. Please review the following stack trace for more information regarding the error.
Exception Details: javax.faces.el.MethodNotFoundException
textField1_processValueChange: mfamove.Page1.textField1_processValueChange(javax.faces.event.ValueChangeEvent)
Possible Source of Error:
Class Name: com.sun.faces.el.MethodBindingImpl
File Name: MethodBindingImpl.java
Method Name: method
Line Number: 206
Source not available. Information regarding the location of the exception can be identified using the exception stack trace below.
Stack Trace:
com.sun.faces.el.MethodBindingImpl.method(MethodBindingImpl.java:206)
com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:124)
javax.faces.component.UIInput.broadcast(UIInput.java:492)
javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:249)
javax.faces.component.UIViewRoot.processValidators(UIViewRoot.java:343)
com.sun.faces.lifecycle.ProcessValidationsPhase.execute(ProcessValidationsPhase.java:78)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:221)
com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
sun.reflect.NativeMethodAccessorImpl.invoke0(NativeMethodAccessorImpl.java:-2)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
java.security.AccessController.doPrivileged(AccessController.java:-2)
javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
java.security.AccessController.doPrivileged(AccessController.java:-2)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
com.sun.rave.web.ui.util.UploadFilter.doFilter(UploadFilter.java:194)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:210)
org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
java.security.AccessController.doPrivileged(AccessController.java:-2)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:189)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.doProcess(ProcessorTask.java:604)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:475)
com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:371)
com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:264)
com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:281)
com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:83)
Please give me idea how I use record navigation
Thank�s
Aamir

ColdFusion 9 - The event viewer gives me this error.

Similar Messages

Maybe you are looking for