Coldfusion Builder 3.0 - Constantly goes into some type of wait state.

Coldfusion Builder 3.0 - Constantly goes into some type of wait state. It eventually returns...but does anyone have any ideas??

You may want to turn on the “progress” view (Window>Show view), as it may show that the waits are when CFB is trying to talk to your CF server for some reason and may be held up.
/charlie

Similar Messages

We use Thunderbird all the time and love it, but for about a week it constantly goes into not responding mode. My boss uses the same service at home with no pr

Thunderbird is a great asset to my boss and I. We use Thunderbird all the time and love it, but for about a week it constantly goes into "not responding mode". My boss uses the same service at home with no problem at all.
I did an "safe mode" and restart and for a few minutes I thought it was "healed". However, I did a search and the same thing started happening again. The little blue ring starts spinning and "not responding" pops up above the toolbar. Sometime the screen fades to a sort of greyish and no mouse click are responded to, even to close Thunderbird.
Please help however you can. Our office number is 512.246.3995.
Thank you,
Mary

We wonder if it is a firewall problem that developed here at the office. My boss uses her account at home and all is well, but here, experiences the same issues I described

Premiere Elements 8 goes into some kind of hibernate status while opening

Hi!
When I open an old project Premiere Elements 8 first complains about missing preview files so i skip those. Then when it open ups "for real" it just goes into a kind of hibernated status. I cannot reach it an start working.
I have seen this before and then I have gone back to an older version. But it doesn´t help this time.
What should I do? I need to export that project to a high resolution version this weekend.
Ps. I find it very hard to run this forum since you have changed the design. I have tried to search but use probably wrong words. Please help!

Hello, brittabettina. Premiere Elements has its own forum, and most of the PRE gurus hang out there:
http://forums.adobe.com/community/premiere_elements
You'll probably find better help there than here. Good luck!

Constantly going into "unhappy" & ! folder error

Hi everyone
I'm having some problems with my iPod 30Gb Photo
it seems to periodically go into either the "unhappy" (normally this one) or "! folder" error, when it does this it doesn't recognize that i've got it plugged into my computer and shows the "can't mount iPod" message, and so I can't restore the HD. However when it doesn't have the "unhappy" or "! folder" error it is recognized as per usual.. I've tried everything I can but as far as I can tell sometimes it just magically returns to normal and until it does I cant use it

Please believe me, I did manage to solve these "can't mount" and "folder error", however you need to fix it with a Mac computer if your iPod formatted by a PC, or vince verse. First you must plug your iPod with a AC charger, put it in Disk Mode, plug your PC's formatted iPod with a Mac computer, your iPod will show up in the Desktop, open the Disk Utility and do a ERASE (fomat) in MS Dos format. Once completed, plug it with your PC and you will see the window pop up and ask you to do the Restore for your PC to read it. Then open the iPod updater and click Restore.

IPhone constantly goes into recovery mode

Yesterday morning I woke up and I saw a yellow triangle with the words "Connect to iTunes" so I did and was told I was in recovery mode and i needed to restore.
So I did, 4 times in one day.
It will go in that mode if im doing something on the phone or just letting it sit.
I've reinstalled iTunes but I still get the error.

at this point I would suggest calling 1-800-myiphone and speak to the experts

ColdFusion Builder 3 Settings Reset on Restart

I've downloaded the ColdFusion Builder 3 trial and am experiencing some odd and very annoying behavior.
I've customized some code editor text font and color settings. I've added an entry to the CF Servers panel for an instance of ColdFusion 10 running inside a VMWare virtual server on my laptop.
When I restart Eclipse, all the code customizations I've made are reverted back to the default install settings and the entry in my CF Servers panel is gone.
I've been an IntelliJ user for well over a year, but in doing much more cfscript-based development the CF Plugin for IntelliJ is proving to be a hindrance so I thought I'd give CFB 3 a try and see if there were any improvements over CFB 2. However, I can't take this kind of behavior. Hopefully someone can give me a setting or someone else has seen this before and can give me an idea of where to start looking.
I have CF Builder installed as a plugin into Eclipse Kepler 64-bit for Mac. I added the CF Builder update site and have updated to CF Builder 3.0.0.290000. I also previously installed as the standalone version with no additional plugins and experienced the same behavior.
Anyone have any ideas?
Thanks,
Dan

Milan...
My apologies for taking so long to get back to this. I just did some testing tonight of your instructions as well as those by Kaif above.
Firstly, I installed ColdFusion 10 locally on my Mac. I added the local server to the CF Servers panel successfully. After restarting Eclipse, the localhost entry remained in the CF Server panel.
Secondly, I followed your instructions to make a new profile and make my font/coloring customizations in it. I restarted Eclipse and my font and color selections were maintained (through 3 restarts). I noted that my newly created profile was selected in Preferences after each restart.
I then added a remote CF 10 server to the CF Servers panel successfully (as noted by the panel telling me that the server was running and being able to launch the CF Admin from within Eclipse). At this point there were 2 entries in my CF Server panel--localhost and the one remote server that lives inside my VM. I restarted Eclipse and when it came back up, only the localhost server remained. I might add that the VM has ColdFusion 10 installed in "multi-instance" mode and that the remote server instance that I added to the CF Servers panel was one of 4 CF instances configured and running inside the VM.
All the while, my font and color customizations have remained the way I set them.
So, it appears as though we're down to just one bug relating to remote server registrations in the CF Servers panel.
I saw that another user was reporting something similar in this thread: ColdFusion Builder 3 RDS and Remove Server settings reset on each restart so apparently it's not just me.
Thanks to you and everyone else for all the ideas and troubleshooting help thus far. At least at this point I think I might be able to use this for day-to-day coding, even though I really want the remote server system to work correctly so I can use the step debugger feature again.
Dan

Registering a child of registered object goes into endless recursion

Hi
Looks like we have found another bug in toplink.
test scenario: object A have a indirection relation 1:1 with object B
Lets register object A. Everything works fine. Lets register that cloneA1 again. It is fine again ( registration returns same object).
Now lets ask cloneA1 for related object B : cloneA1.getB(). Works fine. And we know that it retirn registeres object cloneB1. Now - lets imagine that developer made a mistake (usual thing is this unperfect world) and trying to register cloneB1 again. Instead of silently returning same object instance cloneB1, toplink in going into some endless recursion which ends up with StackOverflowError:
Received execption: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException: java.lang.StackOverflowError
at oracle.toplink.publicinterface.Session.getDescriptor(Unknown Source)
at oracle.toplink.publicinterface.Session.getDescriptor(Unknown Source)
at oracle.toplink.internal.descriptors.ObjectBuilder.extractPrimaryKeyFromObject(Unknown
Source)
at oracle.toplink.internal.descriptors.ObjectBuilder.extractPrimaryKeyFromObject(Unknown
Source)
at oracle.toplink.internal.descriptors.ObjectBuilder.extractPrimaryKeyFromObject(Unknown
Source)
at oracle.toplink.internal.descriptors.ObjectBuilder.extractPrimaryKeyFromObject(Unknown
Source)
at oracle.toplink.internal.descriptors.ObjectBuilder.extractPrimaryKeyFromObject(Unknown
Source)
at oracle.toplink.internal.descriptors.ObjectBuilder.extractPrimaryKeyFromObject(Unknown
Source)
at oracle.toplink.internal.descriptors.ObjectBuilder.extractPrimaryKeyFromObject(Unknown
Source)
at oracle.toplink.internal.descriptors.ObjectBuilder.extractPrimaryKeyFromObject(Unknown
Source)
at oracle.toplink.internal.descriptors.ObjectBuilder.extractPrimaryKeyFromObject(Unknown
Source)
at oracle.toplink.internal.descriptors.ObjectBuilder.extractPrimaryKeyFromObject(Unknown

The mapping of A and B is as follows:
Both A and B are interfaces of concrete classes
mapped with Interface Alias:
Aimpl implements A
Bimpl implements B
The attribute mappings are:
Bimpl.as is a OneToMany collection of A (bidirectional to Aimpl.b)
and using Transparent Indirection with IndirectList
Aimpl.b is the OneToOne "owner" B (bidirectional to Bimpl.as)
Aimpl.b OneToOneMapping to switched to ProxyIndirection
upon startup.
Application code works exclusively with A and B and gets
concrete instances from a factory.
There's much more to the mapping, but that seems to be all
the bits related to this problem.
Thanks and best regards,
John

8900 keeps going into standby and the only way to unlock is to press the power button?

Hi,
I Recently had my T-Mobile blackberry unlocked for my wife to use. It is now on Virgin. I have upgraded the software and everything is working well with the exception that the phone keeps going into some kind of stand by. It isn't the normal keypad lock, the unlock button wont unlock it, you have to press the red power button for a few seconds to wake it up.
It appears to be on a timer as it locks after about 2 minutes and goes to a black screen. It will happen in the middle of typing a text or whatever you are doing and when you press the power button to unlock it, it then takes you back to the home screen.. Very annoying!
I have gone through all the options and cant find anything to stop it. The auto on/off if off. Password is disabled with security time out set to 30 mins.
Any help would be appreciated
Thanks

Managed to sort the problem by roling back the software to version 4.6.1
Thanks for all your help.....??

Max OSX10.10.3, Adobe acrobat/document cloud goes into "application not responding mode" right away. must force quit. cannot use the program. Why?

Have never been able to get this application, adobe acrobat dc, to work on my mac. Constantly goes into "application not responding" mode. Happen to anyone else and know how to fix it?

Hi Nicholas,
Verify if Protected View and Enhanced Security are Off. Go to Acrobat-> Preferences -> Security (Enhanced):
Also having too many fonts active can hurt the performance of any application.
Try the step 10 of the KB: https://helpx.adobe.com/x-productkb/global/troubleshoot-fonts-mac-os-x.html
Regards,
Rave

Adobe ColdFusion Builder Bugbase: Vote for Some of these Bugs to be Fixed

As I'm sure you know CF Builder 3 isn't quite perfect yet and the Adobe Bugbase has a not-so-great search interface so I thought I would share some issues I reported recently which have impacted my workflow with the product. Perhaps some of my fellow developers have also run into these annoyances. If you have, or if you feel like supporting these issues to get Adobe's developers to fix them, I encourage you to also leave a note on each bug to increase the likelihood that they get fixed in the next release. Feel free to also post links to bugs/feature requests you've submitted and perhaps the community will also support your bug reports as well.
Below please find the name and link to each bug/feature request. To vote for the bug please click the "my vote" button at the bottom right corner of the page.
Bug 1:Code Coloring Breaks When Comments Used Within Function with Named Arguments
Bug#3831825 - Code Coloring Breaks When Comments Used Within Function with Named Arguments
Bug 2: ColdFusion Builder 3.0 Hangs When Using Code Assist on Large Files
Bug#3833130 - ColdFusion Builder 3.0 Hangs When Using Code Assist on Large Files
Note: Adobe has asked for code samples on this one. If you have a large CFM or CFC file that hangs when trying to provide suggestions please upload your file to the bug report.
Feature Request 1: Code Suggest Enhancement: Ability to disable code suggest for variables / tags independantly
https://bugbase.adobe.com/index.cfm?event=selectBug&CFGRIDKEY=3854326
Note: This one is related to the above bug (bug #2). I believe that if we can turn on/off specific types of suggestions we can improve the performance when using code assist. This one will need a lot of votes since it's a feature request.
Bug 3: ColdFusion Builder Ignores CFELSEIF/CFELSE Tags in Outline
https://bugbase.adobe.com/index.cfm?event=selectBug&CFGRIDKEY=3865754

Thanks Carl. I haven't tried Twitter yet as I don't really have any followers that are fellow developers. I've been looking for other people with relevant problems though on forums (this one, stackoverflow, etc...) and when I encounter them I pass along my bugbase submissions.

I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down eliminate

I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down menu with the gear box symbol to eliminate

I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

Some Albums Going into "Compliations" Folder

For some reason about 100 albums Ive loaded onto my iMac have gone into a folder in my "Music" folder called "Compilations" instead of the music folder with the name of the band.
Example: 6 of my Led Zeppelin albums in are in the proper "Led Zeppelin" folder ... but for some reason Physical Graffiti always goes into the "Compilations" folder.
I actually spent 2 hours one day moving all the albums back into their proper folders, only to find them BACK in "Compilations"
Anyone else have this issue or know why its happening?
Thanks
BRian Sullivan

Check the info tab for anything that is going into compilations. Highlight a song in iTunes that you know is not going into an Artist folder, right click on it and choose Get Info and click the Info tab (alternatively choose Get Info from the File menu). Look for a tick in the "part of compilation" box.
To remove "part of compilation" from a whole album click on the first track and while holding down the shift key go to the last one and click on it. This will highlight the selection. Right click on the selection and choose Get Info, you be asked if you wan to update multiple items, say yes. In the box the opens change "Compilation" to No. The album will move automatically from the Compilations folder into the relevant artist folder.

I to use iphoto library manager to save corrupted iphoto and each time it saves some and the first time it brings up iphoto, iphone goes into "not responding" mode. Using mac book pro, iphoto 9.5.1, and maverick 10.9.2.

I've had issues with my iPhoto "not responding" and as a result I am attempting to save my photos to an external hard drive using iPhoto library Manager but each time I start the program it saves some, and then when it starts iPhoto, iPhoto then goes into not responding mode. Using mac book pro, iphoto 9.5.1, and maverick 10.9.2. I have completed all of the photo library first aid steps several times, but it makes no difference, iphoto eventually goes to "not responding." Initial issues started with Time Machine back ups stopping because of iphoto. Thanks......

Do you have a back up?
If you're just trying to recover the photos you can do that much more simply:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Originals' or 'Masters'. (varies according to the version of iPhoto)
Your photos are inside - these are the originals as imported from your camera.

Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately.

Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately. Is there some way I can open the contact list, click on all of the individual addresses to which I want to send the email without the list closing between each address entry, and have all of my address entries be listed to the email at one time? Something like it works in Gmail. I do not want to use set lists, I want to enter different addresses each time I send an email. And I am a very slow typist, so I don't want to type the first few letters of each recipient's name. It is much faster for me to just click on the e-mail addresses in the list as a group. It doesn't make any sense to me to have to reopen the contact list for each address, when it should be so easy to click on all of the addresses I want at one time and then click once to add them all to the email as a group. If there is a solution to this, please tell me. Thanks.

Vatlily,
Try this:
1. Select Mail>File>New Message.
2. Select Mail>Window>Address Panel.
3. Use (command+click) on the desired addressees in the Address Panel to create the list.
4. Click "To:" on the top left of the Address Panel.
The group that you selected will be added to the "To" field in your New Message.

I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have manged to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the pr

I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have managed to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the projects, what I would like is a piece of text or icon that when you roll over it and then click a separate window pops up with additional information in, once finished reading the info you can then click to close the box, any advice on how to do this?

The best way to do what you're asking is with the Composition widget. Start with the Tooltip preset, which, by default shows the info on rollover. You can change the option to show on click, which is what you're after. You can also add the close button or have the info disappear on rollout.
David

Coldfusion Builder 3.0 - Constantly goes into some type of wait state.

Similar Messages

Maybe you are looking for