ColdFusion Builder Update 1 issue on Mac

If you are running ColdFusion Builder Plugin inside Flash Builder 4 on Mac, and you check for updates and install CFB Update 1, make sure you close FB4 before installing the update. If not, it will blow up your CFB plugin in FB4 and you'll have to reinstall CFB.
Instead of using the check for CFB updates inside FB4/Eclipse,I had to:
1) close FB4.
2) Run Adobe Updater outside FB4
3) Download CFBuilder Update 1 and install it.
4) Then re-open FB4 again
Don Kerr
Manager, Houston Space City Adobe User Group
http://spacecity.groups.adobe.com

If you are running Panther, you already have that firmware update. No iMac PowerPC can run 10.2 or later without the most current firmware on their system.

Similar Messages

Coldfusion Builder Updates?

I'm guessing that Help>Check for Updates is just a tease. It seems like the only way to get ColdFusion Builder 2 Update 1 is to download the trial, uninstall my current version, and install the new version? Is this correct? Or is there a better way?
Thanks.

Adding to what Konatala helpfully offers here, I want to speak to Michael’s wondering why the Help>”check for updates” seems “just a tease”. It’s worth keeping in mind that CFBuilder is not something that Adobe built entirely on their own. Rather, CFB is actually an extension of the underlying open source Eclipse project (and also has components of the commercial Aptana plugin for Eclipse).
So many menus and other features you’d find in CFB are not therefore necessarily “from Adobe” and “related to” CFBuilder specifically, but are rather there because they are features of Eclipse, or Aptana. This “check for updates” is an example. It’s related to updates to Eclipse itself, as well as plugins that use that mechanism to be updated.
But beyond that, one might reasonably ask “ok, well why then does it not at least offer updates to CFB itself, even if in addition to other Eclipse/Aptana features?” I can’t answer that. It is unfortunate, and I’ve not seen any good explanation for that. Maybe someone from Adobe might see this someday and offer a thought.
Hope that’s helpful.
/charlie

Yosemite 10.10.2 update stability issues on Mac Mini

I applied the Yosemite 10.10.2 update this morning. Since then the system has crashed and rebooted itself 4 times.
How can I remove the update until there is a resolution for this?
KAM

I have exactly the same problem and my computer restarts all the time. Here is the report log:
Anonymous UUID:     -------
Fri Jan 30 20:48:40 2015
*** Panic Report ***
panic(cpu 6 caller 0xffffff7f88a8af63): "GPU Panic: [<None>] 3 0 a0 99 0 8 0 3 : NVRM[0/1:0:0]: Read Error 0x00137310: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x104200000 0xffffff811b85e000 0x0e7150a2, D3, P0/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.7.21/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 6), Frame : Return Address
0xffffff81130b30d0 : 0xffffff8005f3a811
0xffffff81130b3150 : 0xffffff7f88a8af63
0xffffff81130b3230 : 0xffffff7f86b60d28
0xffffff81130b32f0 : 0xffffff7f86c2b1b6
0xffffff81130b3330 : 0xffffff7f86dc0cf7
0xffffff81130b3360 : 0xffffff7f86b95238
0xffffff81130b35c0 : 0xffffff7f86e3d298
0xffffff81130b3630 : 0xffffff7f86e3d0a3
0xffffff81130b3650 : 0xffffff7f86b62050
0xffffff81130b36d0 : 0xffffff7f86b655c5
0xffffff81130b38d0 : 0xffffff7f86b66d64
0xffffff81130b39b0 : 0xffffff7f86d07d8c
0xffffff81130b3a60 : 0xffffff7f86cfbe63
0xffffff81130b3c30 : 0xffffff7f86b1278b
0xffffff81130b3cc0 : 0xffffff7f86afbfc4
0xffffff81130b3d40 : 0xffffff7f86afec8f
0xffffff81130b3db0 : 0xffffff7f86afe9aa
0xffffff81130b3e20 : 0xffffff7f86ac371a
0xffffff81130b3e60 : 0xffffff7f86ac2b50
0xffffff81130b3e90 : 0xffffff7f86abed33
0xffffff81130b3ef0 : 0xffffff80064d7162
0xffffff81130b3f40 : 0xffffff80064d507d
0xffffff81130b3f80 : 0xffffff80064d5146
0xffffff81130b3fb0 : 0xffffff80060192c7
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f86ab3000->0xffffff7f86aedfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f86724000
         com.apple.iokit.IONDRVSupport(2.4.1)[F4738C55-B507-3627-A9CA-3D29A5230A03]@0xff ffff7f86afa000->0xffffff7f86b09fff
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f86ab3000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f86724000
         com.apple.driver.AppleMuxControl(3.7.21)[32B7E2DE-1F9D-3555-B687-7A76A62B81D2]@ 0xffffff7f88a7c000->0xffffff7f88a8ffff
            dependency: com.apple.driver.AppleGraphicsControl(3.7.21)[62689710-EEA7-307A-AC83-B8F25DA88 A6A]@0xffffff7f88a74000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[70E2B65E-A91A-3522-A1A0-79FD63EABB4C]@0xfffff f7f87418000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f86724000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f86ab3000
            dependency: com.apple.driver.AppleBacklightExpert(1.1.0)[0183904C-6A16-32C4-9405-EEFD7F820B 02]@0xffffff7f88a77000
         com.apple.nvidia.driver.NVDAResman(10.0)[53CC0E05-7382-336C-8239-AE884D6CA71A]@ 0xffffff7f86b10000->0xffffff7f86d85fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f86724000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[F4738C55-B507-3627-A9CA-3D29A5230A03]@0xff ffff7f86afa000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f86ab3000
            dependency: com.apple.AppleGraphicsDeviceControl(3.7.21)[4700601D-3FEB-3B86-B2BA-8D71AF84D1 C4]@0xffffff7f86b0a000
         com.apple.nvidia.driver.NVDAGK100Hal(10.0)[DC43029D-568A-3B7C-976B-E922C17F5143 ]@0xffffff7f86d91000->0xffffff7f86f3efff
            dependency: com.apple.nvidia.driver.NVDAResman(10.0.0)[53CC0E05-7382-336C-8239-AE884D6CA71A ]@0xffffff7f86b10000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f86724000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
14B25
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:     0x0000000005c00000
Kernel text base: 0xffffff8005e00000
__HIB text base: 0xffffff8005d00000
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 236083540342741
last loaded kext at 211525018542190: com.apple.driver.AppleUSBTCKeyEventDriver 240.2 (addr 0xffffff7f88c1e000, size 12288)
last unloaded kext at 211601871159390: com.apple.driver.AppleUSBCDC 4.2.2b5 (addr 0xffffff7f88c18000, size 16384)
loaded kexts:
com.avast.AvastFileShield 2.1.0
com.avast.PacketForwarder 2.0
com.squirrels.airparrot.framebuffer 3
com.squirrels.driver.AirParrotSpeakers 1.8
com.rim.driver.BlackBerryUSBDriverInt 0.0.97
com.apple.filesystems.afpfs 11.0
com.apple.nke.asp-tcp 8.0.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AGPM 100.14.37
com.apple.driver.ApplePlatformEnabler 2.1.0d1
com.apple.driver.X86PlatformShim 1.0.0
com.apple.iokit.IOBluetoothSerialManager 4.3.1f2
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 267.0
com.apple.driver.AppleHDA 267.0
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AudioAUUC 1.70
com.apple.GeForce 10.0.0
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.AppleIntelHD4000Graphics 10.0.0
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleIntelFramebufferCapri 10.0.0
com.apple.driver.AppleMuxControl 3.7.21
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.AppleSDXC 1.6.5
com.apple.driver.AirPort.Brcm4360 901.19.10
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleUSBXHCI 705.4.14
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.security.SecureRemotePassword 1.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 267.0
com.apple.kext.OSvKernDSPLib 1.15
com.apple.nvidia.driver.NVDAGK100Hal 10.0.0
com.apple.nvidia.driver.NVDAResman 10.0.0
com.apple.iokit.IOSurface 97
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleSMC 3.1.9
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.iokit.IOBluetoothFamily 4.3.1f2
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.driver.AppleHDAController 267.0
com.apple.iokit.IOHDAFamily 267.0
com.apple.iokit.IOAcceleratorFamily2 156.4
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.driver.AppleGraphicsControl 3.7.21
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.CoreStorage 471
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.iokit.IOUSBMassStorageClass 3.7.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.0
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
System Profile:
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (7.15.124.12.10)
Bluetooth: Version 4.3.1f2 15015, 3 services, 19 devices, 1 incoming serial ports
Thunderbolt Bus: MacBook Pro, Apple Inc., 23.4
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
USB Device: Hub
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Serial ATA Device: APPLE SSD SM256E, 251 GB
Model: MacBookPro10,1, BootROM MBP101.00EE.B05, 4 processors, Intel Core i7, 2.3 GHz, 8 GB, SMC 2.3f36
Network Service: Wi-Fi, AirPort, en0
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In
Can anyone advise??? I am afraid I have to reinstall and would lose quite some important info.

Flash Builder 4 LDAP issue on IIS 7 with Coldfusion 8

I have a cfc that returns empty strings back into my project when I attempt an auto login through LDAP. The same files perform correctly on a different server with IIS 6. I set up a simple cfm on the IIS 7 server and received the appropriate data. I set up a cfm on the IIS 7 server to invoke the very same cfc that fails in the flash builder and received the appropriate data. Both servers are inside the company firewall.
The web folder is set up as an application with windows authentication enabled, disabling and enabling the anonymous authentication seems to have no impact on any of the scenarios. I am assuming I am missing some configuration in the ColdFusion Flex integration but I am not sure what it is. Anyone have a shot in the dark on this one?
Enable Flash Remoting support &
Enable Remote Adobe LiveCycle Data Management access are both checked
SSL connections are not being used.

I absolutly did read the guidance notes and it was based in them that we installed.
Quote:
"Now that we have had an opportunity to undertake further testing with the final release of Mac OS X 10.7, we are pleased to report that there are only minor usability issues when using Flash Builder 4.5.1 on Mac OS X 10.7 and, as such, we will be updating our previous statement to confirm compatibility of these releases"
What I am now experiencing on two different machines is what appears to be outside the scope of these notes and either a new issue that is reproducible, or a Java issue related to 10.7. Not being a Java guy I'm not sure were to begin short of trying Eclipse on its own.
I am able to produce a crash of FB 4.5.1 by just trying to close an MXML file by clicking the close button of the tab, or by closing a project. This is on two seperate machines now.

How do I add/update/delete data using ColdFusion Builder 3?

I feel like this is a really simple and stupid question and should be easy to figure out, but I can't.
I am relearning ColdFusion after 12 years out of the IT field. I am using the ColdFusion 9 Getting Started:Volume 1 book. In Chapter 7 it states that I need to edit the Application.cfc file so that I can edit the database rather than just selecting from the database. I can't seem to find anything related to that file in any search. In my ColdFusion 11 Administrator I have set this mySQL database to be able to be edited, but ColdFusion Builder 3 doesn't seem to allow any editing of the tables. I have not had much luck searching for help regarding this on the internet either. My biggest problem so far is getting ColdFusion Builder to talk with my mySQL database properly so I can actually get on with relearning ColdFusion and writing code. Frustrating!!

I do have ColdFusion 11 Administrator installed. When I go to Data and Services there and open the datasource (OWS) that I want to connect to and query off of, and go to Advanced Settings, I show that the following are selected:
SELECT
CREATE
GRANT
INSERT
DROP
REVOKE
UPDATE
ALTER
Stored Procedures
DELETE
If, in ColdFusion Builder 3, I open the RDS Query viewer and write the following basic update query (Server: default:local; Datasource: OWS):
insert into directors(FirstName, LastName)
Values ('Benjamin', 'Forta');
I get the following RDS error message:
java.sql.SQLException: Can not issue data manipulation statements with executeQuery().
According to the book and some information I have seen online, the SQL Query Tool, for security's sake, by default allows execution of SELECT statements, but no other SQL statements. According to the book, to change this behavior I need to edit the Application.cfc file in the ows/sql directory. I have to change the THIS.select_only flag from the default of yes to no and save the file. I cannot find this file anywhere. I have seen an application.cfm, but I think this is different that what they want because I can't find anything in that file that says THIS.select.

Mac OS X 10.9 ColdFusion Builder 2

I would like to know if anyone has any issues installing or using ColdFusion Builder 2 since the recent release of the new version of Mac OS X 10.9 Mavericks.

Hi,
Thanks so much for your post.
Well today I re-installed Flash Builder 4 & ColdFusion Builder(as I got the student licence). I fist installed Flash Builder 4, and then I installed ColdFusion Builder as a plugin into Flash Builder 4, and it works!
I am so happy. Maybe I should of tried the eclipse way again, but I heard many people on twitter saying this way worked for them with no issues, and it did for me too, I am so happy
thanks so much for your help,
Johnny

ColdFusion Builder lacking bug fix updates

I have to say that since the product was officially launced, we had one small update that provided a few fixes.
The question I need to ask is what about these more serious bugs that are stopping this product from being great?
There are about 30+ bugs listed on the bug tracker that have been there for over 18 months that are still major problems today, some of these I consider major and should be pushed to getting fixed as quickly as possible.
The number one pet hate of mine is wasting time with an Application that doesn't work correctly, so how does this affect ColdFusion Builder?
Lets look at setting up of servers on ColdFusion Builder, this has got to be the number one most used and needed feature of this product and yet it doesn't work and has so many reported bugs that I would have thought that these would be fixed by now.
If one is lucky, you can setup a server and start and stop this from within Builder. However I can tell you that even when you have it setup, it will stop working as well.
Lets look at what I have setup at the moment.
I have had ColdFusion 9 and 9.01 installed and still donot mange to be able to start and stop the server.
I now have a mutli server version of ColdFusion 9.01 locally, and was able to get this to work briefly. And now it no longer works, with no changes to any of the settings. Don't get me started on remote servers, these are even worser trying to get working.
And even if you do make changes to the server setup in builder, you have to close and restart the Application. This is not acceptable to me either.
I could go on about how much of a hit and miss this feature actually is.
So the question is if this a feature that people would want to buy this product, why is there no fixes for the problems that are still there after 18 months?

Yes they where, they were reported in ColdFusion 7 beta program, ColdFusion beta program and ColdFusion 9 beta program.
When it is reported that many times, and nothing is done what sort of confidence do you think this gives us users of the product?
During the ColdFusion 9 beta program, the cfgrid had many problems that had been reported in CF8 beta program and was again reported and we had been told it was fixed. Did it get released with the initial 9.0 version? No it didn't, did it get released with the 9.01 beta program? No it didn't.
Again what sort of confidence does this give people in this product?
I even fought hi and low with Adobe to get these grid problems fixed, not only did they break more things but it was not even backward compatible. Evey person I spoke to refused to fix it, becuase I did not have paid support. This even went as far as Adam, and Kevin Lynch because I got feed up with the fact that 9.0 got released and it broke our application to the point when we fixed one thing it broke another, to the point that we could not get at the source of ColdFusion to fix the problem.
Each and every time we were told there was a work around, and no work around was ever produced.
When 9.01 was released was it fixed? No it wasn't, in fact it was even worse. And the answer again from Adobe was that unless we have paid support it will not get fixed.
So Ray the answer is very simple, Adobe is not interested in providing more patches / hot fixes past the intial ones they have always released. Even it it effects people from moving upto the latest version...
I can provide many examples of emails from employees of Adobe, that say the same thing no paid support no fix. Now we have to wait another 2 years and wait to see if these problems get fixed, and to me I am sorry that is not an issue that one should have to endure. When talking to people about ColdFusion the same problems exist each and every time, the lack of support and problems that never get fixed puts people off from keeping on buying the product and they end up moving on.
I have been in two companies that began their days as ColdFusion developers, and both companies ended up moving on because of these problems I have outlined. I can understand a company like Adobe needing to make money, but at the end of the day they will continue to loose money because people will look at other options that are better supported, have more outfixes and updates.
The amount of updates that Microsoft release in 1 year is maybe like the same amount Adobe/Macromedia/Allaire have released in 15 years.
Do't take this the wrong way, but the debugger is buggy as hell. It works when it wants to and even to the point when you do get it working it actually gets slower and slower each time you run it. This has been a problem for now 6 years in this product and it has never gotten any attention, now that CF builder utilises this feature, I would have hoped that these bugs and problems got fixed. But they never did.
Every major release is about throwing new features into the product, but when it comes to issues like this do any of the previous versions that have these problems get fixed? No they don't, and even the current major release is not fixing any of these previous issues either.
The problem is one needs to draw the line, and stop putting features into a product that Adobe can't continue to support.
And till that changes people are going to continue to get rather annoyed with Adobe, and the more they get annoyed the more customers Adobe end up loosing. I don;t make my comments very lightly when I do make them, and after 15 years I have seen it all with ColdFusion and the one thing that never changes is the lack of bugs in older features that ever get fixed.
Sorry for the rant, but this is something that Adobe HAVE to address and address sooner than later. I know of 3 more companies that are moving away from ColdFusion, for more reasons than what I have outlined here.

ColdFusion Builder 3 Mac Eclipse Plugin

I have been trying numerous ways to install CFBuilder 3 Trial into Eclipse 4.2.2 on Mac (Yosemite) and just cannot get CFBuilder to load the CF Perspective. I have tried in various Eclipse versions, and in multiple orders including just installing CFBuilder Trial Edition without in a clean 4.2.2 Eclipse from clean CF install (plugin only, but tried also installing full CFBuilder app both before and after plugin installation, rebooting between each install) and new workspace.
My ultimate goal is to also install Flash Builder 4.7 into the same Eclipse app, but am starting with CFBuilder since Flash Builder installs successfully. Note that this question is ONLY for the ColdFusion Builder 3 installation alone without Flash Builder installed on the machine.
Bottom line: I just cannot get CFBuilder 3 to load into Eclipse 4.2.2 and show the CF Perspective even though it appears to be a successful plugin install; I am starting Eclipse either from both the plugin directory's shortcut and from the eclipse app itself - neither work.
Does anyone have a clue whether this can be done on a Mac?

Milan...
My apologies for taking so long to get back to this. I just did some testing tonight of your instructions as well as those by Kaif above.
Firstly, I installed ColdFusion 10 locally on my Mac. I added the local server to the CF Servers panel successfully. After restarting Eclipse, the localhost entry remained in the CF Server panel.
Secondly, I followed your instructions to make a new profile and make my font/coloring customizations in it. I restarted Eclipse and my font and color selections were maintained (through 3 restarts). I noted that my newly created profile was selected in Preferences after each restart.
I then added a remote CF 10 server to the CF Servers panel successfully (as noted by the panel telling me that the server was running and being able to launch the CF Admin from within Eclipse). At this point there were 2 entries in my CF Server panel--localhost and the one remote server that lives inside my VM. I restarted Eclipse and when it came back up, only the localhost server remained. I might add that the VM has ColdFusion 10 installed in "multi-instance" mode and that the remote server instance that I added to the CF Servers panel was one of 4 CF instances configured and running inside the VM.
All the while, my font and color customizations have remained the way I set them.
So, it appears as though we're down to just one bug relating to remote server registrations in the CF Servers panel.
I saw that another user was reporting something similar in this thread: ColdFusion Builder 3 RDS and Remove Server settings reset on each restart so apparently it's not just me.
Thanks to you and everyone else for all the ideas and troubleshooting help thus far. At least at this point I think I might be able to use this for day-to-day coding, even though I really want the remote server system to work correctly so I can use the step debugger feature again.
Dan

Viewer Builder update issue

This update process is just getting absolutely ridiculous. I am trying to get into the viewer builder. It tells me that my viewer builder is out of date and gives me a link to follow. I follow the link, download, install as I am instructed to. When I start the viewer builder after install I am told that my viewer builder is out of date. WHERE IS THE MOST RECENT VIEWER BUILDER? How is this productive and cutting edge? For the investment my company made in this product it should be a LOT easier to keep it up to date. PLEASE provide me a link to the most recent veiwer builder update so that I can move on with my work.

This could be the issue as well. This is the notice that Adobe put on the forums. Upon login, older versions of Viewer Builder (versions 1.5.1 and older) contain a link to upgrade the Viewer Builder that point to the DPS Dashboard. You can download the latest version of Viewer Builder from the Dashboard only if you first delete the existing Viewer Builder from the Applications folder. You can also download the most current Viewer Builder from http://www.adobe.com/go/digpubsuite_vb_mac.
This is exactly what you just told me. So if viewer builder versions 1.5.1 and older are being replaced with a new viewer, why is everything adobe links to taking me to Viewer-Builder-1.5.0-RC.dmg,
Try clicking on any of the links and see.

ColdFusion 10 Update 16 early access build feedback

Use this thread to share your feedback about ColdFusion 10 Update 16 early access build. Refer the following blog post for more details:
http://blogs.coldfusion.com/post.cfm/coldfusion-10-update-16-prerelease-build-available

Use this thread to share your feedback about ColdFusion 10 Update 16 early access build. Refer the following blog post for more details:
http://blogs.coldfusion.com/post.cfm/coldfusion-10-update-16-prerelease-build-available

Last night's update causing XML issues with MAC and MS Word

I am running Snow Leopard on a MAC. Last night Firefox installed an update, and the software I use for work no longer works with Firefox. I use a custom built web app that uses XML code to take web created info and compile into a Word document. Until this latest update, the issue had been when creating the Word doc, extra XML code was being written for images causing them to show as blank in the Word document. Now, the document is being created but not with a .doc extension. I had been in contact with Microsoft about the first problem with no resolution. They were able to duplicate the problem. The first problem only happens on a MAC and is not specific to operating system. This new problem is only happening with Firefox, not Safari, and started today after the last update.

HI,
If you post a crash report, perhaps we can help.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Now copy/paste the entire contents of the Crash Reporter window into your reply here. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.
You may have Safari third party plugins that were compatible with your previous version of Safari but not Safari 5.0.1. It's the responsibility of third party developers to update their software, not Apple.
Follow the instructions here. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
If indeed you had third party add-ons installed and Safari still crashes, then post a crash report.
Carolyn

I received an Keynote update notice on my Mac Air. I updated and now can not get into my saved keynote docs. I am being asked to upgrade again and purchase the upgrade. Anyone else having this issue?

I received an Keynote update notice on my Mac Air. I updated and now can not get into my saved keynote docs. I am being asked to upgrade again and purchase the upgrade. Anyone else having this issue?

Try this repair, ensure you complete all the tasks and in the order shown:
1 delete all the iWork applications if you have them, not just Keynote, use Appcleaner from Mac Update to           do this, its freeware
2 restart the Mac;   Apple menu > restart
3 immediately after the start chime, press the shift key until you see the Apple symbol.
         let it fully boot up, it will take longer as the OS is repairing the drive
4 when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and           click repair disc permissions
5 when complete, restart the Mac normally
6 install Keynote from the Mac App Store
Please report back to let us know if this helped.

Folio builder update issue

Was prompted to update folio builder on my Windows 7 PC running InDesign CS5.5. Did so, restarted, launched InDesign and once again was prompted to access folio builder update. Tried it again, same result.
Tried updating both folio producer and folio builder, got the same results.
Still getting the prompt "A newer version of Folio Builder is available for download."
Any ideas on steps to rectify?
Thx

I found a solution to my problem, which is kind of similar. Hopefully this can help others who get the update folio builder request, even when its been updated.
I found Indesign CS6 + Folio Builder has some type of glitch on my Windows 7 machine. If the folio builder window is open when I open Indesign, it will close as soon as Indesign starts up. When I open the Folio Builder panel it will always ask me to update the folio builder, even though it is fully updated.
The solution for me, is to make sure the folio builder panel is always closed when I close down Indesign. In this way when Indesign is opened, the folio builder panel does not open automatically. I then wait for a few seconds after Indesign has fully opened. Once it's fully open and ready to go, I open the folio builder panel and viola the folio builder panel opens correctly and I'm signed in.

ColdFusion Builder 3 Settings Reset on Restart

I've downloaded the ColdFusion Builder 3 trial and am experiencing some odd and very annoying behavior.
I've customized some code editor text font and color settings. I've added an entry to the CF Servers panel for an instance of ColdFusion 10 running inside a VMWare virtual server on my laptop.
When I restart Eclipse, all the code customizations I've made are reverted back to the default install settings and the entry in my CF Servers panel is gone.
I've been an IntelliJ user for well over a year, but in doing much more cfscript-based development the CF Plugin for IntelliJ is proving to be a hindrance so I thought I'd give CFB 3 a try and see if there were any improvements over CFB 2. However, I can't take this kind of behavior. Hopefully someone can give me a setting or someone else has seen this before and can give me an idea of where to start looking.
I have CF Builder installed as a plugin into Eclipse Kepler 64-bit for Mac. I added the CF Builder update site and have updated to CF Builder 3.0.0.290000. I also previously installed as the standalone version with no additional plugins and experienced the same behavior.
Anyone have any ideas?
Thanks,
Dan

Milan...
My apologies for taking so long to get back to this. I just did some testing tonight of your instructions as well as those by Kaif above.
Firstly, I installed ColdFusion 10 locally on my Mac. I added the local server to the CF Servers panel successfully. After restarting Eclipse, the localhost entry remained in the CF Server panel.
Secondly, I followed your instructions to make a new profile and make my font/coloring customizations in it. I restarted Eclipse and my font and color selections were maintained (through 3 restarts). I noted that my newly created profile was selected in Preferences after each restart.
I then added a remote CF 10 server to the CF Servers panel successfully (as noted by the panel telling me that the server was running and being able to launch the CF Admin from within Eclipse). At this point there were 2 entries in my CF Server panel--localhost and the one remote server that lives inside my VM. I restarted Eclipse and when it came back up, only the localhost server remained. I might add that the VM has ColdFusion 10 installed in "multi-instance" mode and that the remote server instance that I added to the CF Servers panel was one of 4 CF instances configured and running inside the VM.
All the while, my font and color customizations have remained the way I set them.
So, it appears as though we're down to just one bug relating to remote server registrations in the CF Servers panel.
I saw that another user was reporting something similar in this thread: ColdFusion Builder 3 RDS and Remove Server settings reset on each restart so apparently it's not just me.
Thanks to you and everyone else for all the ideas and troubleshooting help thus far. At least at this point I think I might be able to use this for day-to-day coding, even though I really want the remote server system to work correctly so I can use the step debugger feature again.
Dan

New Platform Support for ColdFusion 10 and ColdFusion Builder 2.0.1: Windows 8 and Windows 2012 Serv

Microsoft Windows 8 and Microsoft Windows 2012 server are now supported platforms for ColdFusion 10. The new Windows installers are available for download to all retail and licensing customers as well on the trials download page.
The ColdFusion Builder 2.0.1 installers have also been updated to support Windows 8. The existing MAC OS X installer for ColdFusion Builder 2.0.1 has also been certified to now support MAC OS X 10.8.
Refer this technote for more details about the support.

@Adam @CarlV
>what's the version number when you dump the server scope?
ColdFusion Server - Evaluation 10,0,8,284032
OK I see, the I button reports differently to Settings Summary.
About ColdFusion »
System Information
Server Details
Server Product ColdFusion
Version 10,0,8,284032
Tomcat Version 7.0.23.0
Edition Enterprise (Trial)
Serial Number
Operating System Windows Server 2012
OS Version 6.2
Update Level /D:/ColdFusion10/cfusion/lib/updates/chf10000008.jar
Server Settings > Settings Summary
System Information
Server Details
Server Product ColdFusion
Version ColdFusion 10,284032
Edition Enterprise (Trial)
Operating System Windows Server 2012
OS Version 6.2
Update Level /D:/ColdFusion10/cfusion/lib/updates/chf10000008.jar
Adobe Driver Version 4.1 (Build 0001)
Regards Carl M.

ColdFusion Builder Update 1 issue on Mac

Similar Messages

Maybe you are looking for