Coldfusion dev installer wont work - "installer user interface mode not supported..."

i just downloaded the os x version of coldfusion 7 mx
developer edition (for the thrid time making sure the download
wasn't corrupt) and extracted the zip and launched the installer by
double-clicking it. the install screen pops up where it lets you
choose what language and i press ok. almost instantly i get an
error message to pop up that says... "Installer user interface mode
not supported. Unable to load and to prepare the installer in GUI
mode."
umm... what?!
does anyone have any idea what's going on and why the
installer is misbehaving?! thanks!
: : michael

and the answer for others stuck on this...
the problems is an installanywhere bug where if the anything
in the directory path contains special characters like "!" or "#" ,
it causes problems with the install. in my case, the directory path
had a "!" in it... hope this helps someone else out!
: : michael

Similar Messages

  • Installer User Interface Mode not supported

    Hello,
    I get this error when I try to install Flash Builder on my Windows 8 machine (any version 4.5, 4.6, 4.7).
    Can you help me solve this issue?
    Thanks,
    Francois

    You need to switch to desktop view and run the installer from there.
    Mylenium

  • Windows 8, "Installer Interface Mode Not Supported"

    I am getting the "Installer UI Mode Error", "Installer User Interface Mode Not Supported"
    I have tried compatibility mode, as this worked on my previous laptop Windows 7 and XP sp3, but when I "Test Program" and the InstallAnywhere Self-Extractor completes install prep. to 100%, there is no response.

    Is this a very, very old program?  What program? 
    Have you done an Internet search to see if anyone else has gotten it to install?
    Have you tried running it As Administrator, in addition to the compatibility modes?
    -Noel
    Detailed how-to in my eBooks:  
    Configure The Windows 7 "To Work" Options
    Configure The Windows 8 "To Work" Options

  • This advertised application will not be installed because it might be unsafe. Contact your administrator to change the installation user interface option of the package to basic.

    Hi there,
    I was wondering whether anyone could tell me which feature in Windows 7 produces this message "This advertised application will not be installed because it might be unsafe. Contact your administrator to change the installation user interface option of
    the package to basic." and whether it can be turned off in Windows to prevent this message from appearing when installing certain programs that aren't WHQL certified. At first I thought it was the UAC control that generated this message but found out
    that it wasn't and then thought it was the DEP control and found out that it wasn't this either. I'm only seem to be getting this message when installing FileDirector Component Service Version 3 on a few of our workstations which is an add-on that allows file
    integration with Office and is part of FileDirector WinClient Version 3.
    Your help would be much appreciated.
    Many thanks,
    RocknRollTim
    P.S. I know of a way to bypass this message but would ideally not like to have the feature turned on and for the message not to be appear for non WHQL certified program installations in order to make non WHQL certified program installations in the future much
    easier, more simpler and straightforward to carry out. I was redirected by a moderator off the Microsoft Community Forum.

    Hi,
    You can try following options to disable this prompt, but we don't recommend you to do so since this feature helps you to protect your computer.
    Option 1: Run command as admin:
    bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS
    bcdedit -set TESTSIGNING ON
    Restart your computer to apply changes.
    Option 2: Disable in GPO:
    1.Type gpedit.msc in the Run dialog and press Enter.
    2.In the Group Policy Editor, navigate to User Configuration → Administrative Templates → System → Driver Installation.
    3.Double-click on Code signing for device drivers in the right-side pane as shown above.
    4.In the windows that opens, choose Enabled. In the Options, choose Ignore as shown. Then click on the OK button to save the settings.
    Restart your computer to apply changes.
    Kate Li
    TechNet Community Support
    Unmarked as Answer based on OP's request. 
    https://social.technet.microsoft.com/Forums/en-US/35ab1279-c3a1-46be-9f7d-45e8606c1410/this-advertised-application-will-not-be-installed-because-it-might-be-unsafe-contact-your?forum=w7itproappcompat
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • Identity managent user interface is not available

    when i try to acces user administration i get following error.
    A required service for the identity management user interface is not available. Contact your system administrator.

    See OSS note 869852 - Central Note For UME Web Dynpro UIs (user Admin in Portal). Topic #5 Troubleshooting discusses some possible solutions. We have found that sometimes, a complete shutdown and restart of the server works.  Also, our Basis guys stopped and then restarted application com.sap.security.core.admin in the visual administrator and then the User Admin functionality was available for awhile until the portal was stopped/started for backup. Our Basis group is going to look into this further and I will post any additional info that we find.  Would appreciate it if you would do the same.

  • I download the new version of itune but it wont work the itune store can not connect even my apply id wont sign in it has an error 9808

    i download the new version of itune but it wont work the itune store can not connect even my apply id wont sign in it has an error 9808

    Hello SAB7700,
    This first article can help get iTunes successfully downloaded and updated, which should restore access to the iTunes Store.
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Once iTunes is successfully updated, the following articles provides steps that can help get your iPod working in iTunes again and the iTunes Store functioning, should the update not resolve these issues
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Cheers,
    Allen

  • Getting compilation error: java.util.Set is an interface. This interface is not supported.

    Hi Folks,
    Is there a limitation in BEA's web services implementation? I have a simple web
    service that returns an array of java objects. However I am calling another middle
    tier API that returns a Set. I convert this Set into array of object and return
    it via the web service.
    However the .jws file that implements the webservice does not compile. I get the
    following error message:
    java.util.Set is an interface. This interface is not supported.
    Is there a limitation on using Collections within the .jws file? If that is the
    case it is a severe limitation.
    Note my Web Service API returns an array of java objects with no collections in
    them.
    Sanjay

    Hello,
    Generic java collections can only be handled in a very generic, weakly
    typed manner.
    Take a look at the
    http://workshop.bea.com/xmlbeans/guide/conXMLBeansSupportBuiltInSchemaTypes.html
    and also
    http://workshop.bea.com/xmlbeans/guide/conJavaTypesGeneratedFromUserDerived.html
    You might also ask your question to the XMLBeans newsgroup:
    http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=xover&group=weblogic.developer.interest.xmlbeans
    Regards,
    Bruce
    Sanjay wrote:
    >
    Hi Folks,
    Is there a limitation in BEA's web services implementation? I have a simple web
    service that returns an array of java objects. However I am calling another middle
    tier API that returns a Set. I convert this Set into array of object and return
    it via the web service.
    However the .jws file that implements the webservice does not compile. I get the
    following error message:
    java.util.Set is an interface. This interface is not supported.
    Is there a limitation on using Collections within the .jws file? If that is the
    case it is a severe limitation.
    Note my Web Service API returns an array of java objects with no collections in
    them.
    Sanjay

  • Error: The Boot Camp partition "/dev/disk0s3" used by Hard Disk 1 is not supported.

    I installed Lion a couple of weeks ago, and had Parallels 5 installed, but it would no longer run.  Unfortunately, I spent the money to upgrade to Parallels 6 prior to seeing the advice to get Lion to run with 5.  Oh well.  But now, it won't run with 6 either.  What to do?
    Here;s the error again:
    The Boot Camp partition "/dev/disk0s3" used by Hard Disk 1 is not supported.

    You should be able to do this using the Boot Camp Assistant app. There is an option to "Restore the startup disk to a single volume". That should eliminate the Boot Camp partition without harming your Mac OS partition. Even so, make sure you back up your Mac OS X partition data before you do this, just to be safe.
    Lance

  • I made a beautiful invitation for my sons graduation in pages it has 1 photo on the front and 5 photos on the back. When I try to export it to my work pc the text is not supported and it looks terrible. Help!

    I made a beautiful invitation for my sons graduation in pages it has 1 photo on the front and 5 photos on the back. When I try to export it to my work pc the text is not supported and it looks terrible. Help!

    How did you transfer it to the PC?
    Not good to export as a Word .doc/x, better to:
    Menu > Export > PDF
    Peter

  • Coldfusion 11 Developer wont work after local machine restart

    I'm brand new to CF.  I've installed CF 11 Developer & attached to IIS.  I'm on a windows 7 machine.  Every time I have to restart my machine for whatever reason, the CF Administrator wont work, nor will any CFM page work.  I have to completely uninstall CF11 & then reinstall it in order for it to work again.  Any ideas or suggestions as to what might be causing this behavior?  Below is the error message I receive when I try to hit CF Administrator:
    HTTP Status 500 - ROOT CAUSE:
    type Exception report
    message ROOT CAUSE:
    description The server encountered an internal error that prevented it from fulfilling this request.
    exception
    javax.servlet.ServletException: ROOT CAUSE: coldfusion.server.ServiceFactory$ServiceNotAvailableException: The Monitoring service is not available. at coldfusion.server.ServiceFactory.getMonitoringService(ServiceFactory.java:223) at coldfusion.CfmServlet.service(CfmServlet.java:199) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:241) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208) at coldfusion.inspect.weinre.MobileDeviceDomInspectionFilter.doFilter(MobileDeviceDomInspectionFilter.java:121) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:241) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:501) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:422) at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:198) at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:607) at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:313) at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source) at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source) at java.lang.Thread.run(Unknown Source)  coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:70) coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) coldfusion.inspect.weinre.MobileDeviceDomInspectionFilter.doFilter(MobileDeviceDomInspectionFilter.java:121) coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
    note The full stack trace of the root cause is available in the Apache Tomcat/7.0.52 logs.
    Apache Tomcat/7.0.52

    Thanks, Anit.  Honestly, I am unable to determine if the service is running.  I"m assuming it is not based only the fact that no cfm page is returning.  Could you share with me best practice to determine if service is running?  Also, I'm not aware of the hf1100-3776060.jar.  Is it a patch that I need to drop in my Coldfusion installation?
    Thanks so much for your assistance.  This is the 3rd time today I've had to uninstall/reinstall the service.
    AB

  • User Interface mode for windows 8

    I was trying to install Driver San Francisco game and had quite a lot of problems.  This installer works with previous Windows. But failed with following error message while installing 'Install Anywhere'.
    Installer UI Mode Error
    The installer cannot run in this UI mode. To specify the interface mode, user the -i command-line option, followed by the UI mode identifier. The valid UI modes identifiers are GUI, Console, and Silent.
     The supported platform doesn't include 'Windows Server 8'.
    What could be the issue?

    Wow that actually worked... I dont do that anymore because it never works but it worked.
    THANKS
    JON

  • 11g R2 wont work under windows 2008 R2 doesnt support UTC, and cant change.

    I posted this in error under general, and got no responses. So now Im cutting and pasting it into installation, in a last ditched attemtp to find a way to get a clean installation of oralce on a clean installation of Windows Server 2008 R2 working.
    Problem:
    1) cannt connect to oracle outside of box. Get "TNS Connection timeout occured"
    2) em console "Sepecify Host and Target Database Credentials" always says "Connection refused: connect", even though the OS user/pass and DB user/pass are correct.
    What does work:
    1) I can "select * from dual" using "sqlplus / as sysdba" from the commandline on the box itself.
    2) Once, before I got em console half working, I could connect to the DB from outside the box with SYS as SYSDBA using toad. Now I cant.
    How I installed it:
    1) created a user called "oracle" and put them in the Administrators group.
    2) ran the downloaded installer for enterprise version, partition option chosen, AL32UTF8 char set, global db name: orcl, sid: orcl, "Assert all new security settings on" (No idea what this is) etc.
    3) at the end of the installer it came up with the following error:
    "Set the environment variable ORACLE_UNQNAME to the database unique name"
    3.5) opened up the incomming connections in the windows FW for 1158 and 1521 TCP from all.
    4) set ORACLE_UNQNAME as a system env var for oracle as "orcl"
    5) set ORACLE_HOME to c:\app\oracle\product\11.2.0 (or should this be c:\app\oracle\product\11.2.0\dbhome_1 ??)
    6) set ORACLE_SID to orcl
    7) set ORACLE_HOST to dilbert (the machine name)
    Rebooted.
    8) logged into em console on https:
    dilbert:1158 (works from inside or outside the box).
    9) Entered the oracle windows user userame & pass, and SYS and pass (with connect as SYSDBA). However, it always says "Connectoin refused: connect"
    Im not using a domain. computer name is correctly setup as "dilbert" in the OS.
    I cant think of anything to try, and dont know how to start debugging this problem.
    If I look at the running services, i see:
    OracleDBConsolorcl Stopped
    OracleJobSchedulerORCL Stopped
    OracleMTSRecoveryService Stopped
    OracleOraDb11g_home1CLRAgent stopped
    OracleORADb11g_home1TNSListener Stopped
    OracleServiceORCL Running
    OrclVssWriterORCL Stopped
    nd if i try and start those services as oracle (who is in the Administrators group) it says "The operation could not be completed. Access is denied". If I run task manager as Administrator, I can start all of them except for the TNSListener which doesnt do anything, you say start, and it stays stopped. No errors, now warnings. and the JobSchedulreORCL which says no associated devices.
    HAving manually started some of the services (no idea if you are supposed to do that, cant find any installation documentation which covers before/after running the installer), when I try and specify the host and target database credentials in em console, it says:
    Validation Error
    Please correct the following error:
    dbUserPassword - This field must be specified
    However, the DB password for SYS IS specified and correct - so I have no way to fix this.
    I cant find anyinformatin online where to look for log files, but there is nothing in sysman\log
    Now em console is saying "Conection refused" again, and the following process have killed themselves (as will I soon)
    OracleDBConsolercl Stoppped
    The others which I succeded in starting are still running. So TNSListener nor jobscheduler will start, and Consolerocl kills itself after a minute.
    Well, looks like I'm on my own on this one. Oracle will not intall on windows, and none seems to have noticed. Doing a day of googling reveals that all the log files which are supposed to live in sysman/log do not exist in this installation, so no help there.
    However, I did find an obscure log which says:
    The agentTZRegion value in C:\app\oracle\product\11.2.0\dbhome_1\wario_orcl/sysman/config/emd.properties is not in agreement with what agent thinks it should be.Please verify your environment to make sure that TZ setting has not changed since the last start of the agent.
    The TZ of the windows server is set to "UTC" at long time ago. There is nothing in the oralce windows installation guide to say "Do not use UTC, the most comon server time zone in europe". There is no mention of supported windows timezones.
    Now if Oracle doesnt support basic UTC, then we are all in trouble.
    There are hundreds of articles with this problem and how to solve it on Unix, but almost none for Windows. Do we have to solve Oracle installation bugs ourselves? Is there no support?
    Doing the below reveals that Oracle thinks that UTC is America/Rio_Branco. That HAS to be a bug.
    C:\app\oracle\product\11.2.0\dbhome_1\BIN>emctl config agent getTZ
    Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
    Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
    Unable to open file for logging. C:\app\oracle\product\11.2.0\dbhome_1/wario_orc
    l/sysman/log/emctl.log: Permission denied
    America/Rio_Branco
    So what next?
    The list of "supported" timezones in supportedtzs.list only lists UNIX timezones, and NO UTC!!!!!
    Googling this turns up nothing - noone on the planet seems to use UTC on their servers. I find this absolutely shocking.
    Windows server ONLY users UTC - it doesnt support GMT any more.
    So I have to now randomly try timezones in Windows which I dont want, which will be different from all the other servers in the Datacenter. It means all our reports will be out by 1 hour in summer ifI have to chose a timzeone which has daylight savings, compared with all the other databases which are UTC (not daylight savings).
    I would expect this from freeware maintained by one person in his garage.
    It seems that this Timezone issue emans Oracle will not run on windows.
    Tried a lot of things, including setting the timzeonse in windows to be "(UTC) Dublin, Edinburgh, Lisbon, London", which unfortuantely is not UTC (as it is affected by daylight savings).
    When you run
    "emctl config agent getTZ"
    you get:
    "Europe/London"
    The only oracle documentation I can find on this subject tells you to edit the emd.properties, and modify the agentTZRegion property, which doesnt exist.
    I tried the following command:
    "c:\app\oracle\product\11.2.0\dbhome_1\BIN>emctl resetTZ agent"
    Which tells you to execute:
    SQL> exec mgmt_target.set_agent_tzrgn('wario:3938','Europe/London')
    SQL> commit
    However, when I do this, I get:
    SQL> exec mgmt_target.set_agent_tzrgn('wario:3938','Europe/London')
    BEGIN mgmt_target.set_agent_tzrgn('wario:3938','Europe/London'); END;
    ERROR at line 1:
    ORA-20233: Invalid agent name wario:3938
    ORA-06512: at "SYSMAN.MGMT_TARGET", line 3811
    ORA-06512: at line 1
    Great. Obviosly, Im loggin in as SYS as no other users have been setup, and certainly I have not seen nor created nor set the password for "em repository user".

    I posted this in error under general, and got no responses. So now Im cutting and pasting it into installation, in a last ditched attemtp to find a way to get a clean installation of oralce on a clean installation of Windows Server 2008 R2 working.
    Problem:
    1) cannt connect to oracle outside of box. Get "TNS Connection timeout occured"
    2) em console "Sepecify Host and Target Database Credentials" always says "Connection refused: connect", even though the OS user/pass and DB user/pass are correct.
    What does work:
    1) I can "select * from dual" using "sqlplus / as sysdba" from the commandline on the box itself.
    2) Once, before I got em console half working, I could connect to the DB from outside the box with SYS as SYSDBA using toad. Now I cant.
    How I installed it:
    1) created a user called "oracle" and put them in the Administrators group.
    2) ran the downloaded installer for enterprise version, partition option chosen, AL32UTF8 char set, global db name: orcl, sid: orcl, "Assert all new security settings on" (No idea what this is) etc.
    3) at the end of the installer it came up with the following error:
    "Set the environment variable ORACLE_UNQNAME to the database unique name"
    3.5) opened up the incomming connections in the windows FW for 1158 and 1521 TCP from all.
    4) set ORACLE_UNQNAME as a system env var for oracle as "orcl"
    5) set ORACLE_HOME to c:\app\oracle\product\11.2.0 (or should this be c:\app\oracle\product\11.2.0\dbhome_1 ??)
    6) set ORACLE_SID to orcl
    7) set ORACLE_HOST to dilbert (the machine name)
    Rebooted.
    8) logged into em console on https:
    dilbert:1158 (works from inside or outside the box).
    9) Entered the oracle windows user userame & pass, and SYS and pass (with connect as SYSDBA). However, it always says "Connectoin refused: connect"
    Im not using a domain. computer name is correctly setup as "dilbert" in the OS.
    I cant think of anything to try, and dont know how to start debugging this problem.
    If I look at the running services, i see:
    OracleDBConsolorcl Stopped
    OracleJobSchedulerORCL Stopped
    OracleMTSRecoveryService Stopped
    OracleOraDb11g_home1CLRAgent stopped
    OracleORADb11g_home1TNSListener Stopped
    OracleServiceORCL Running
    OrclVssWriterORCL Stopped
    nd if i try and start those services as oracle (who is in the Administrators group) it says "The operation could not be completed. Access is denied". If I run task manager as Administrator, I can start all of them except for the TNSListener which doesnt do anything, you say start, and it stays stopped. No errors, now warnings. and the JobSchedulreORCL which says no associated devices.
    HAving manually started some of the services (no idea if you are supposed to do that, cant find any installation documentation which covers before/after running the installer), when I try and specify the host and target database credentials in em console, it says:
    Validation Error
    Please correct the following error:
    dbUserPassword - This field must be specified
    However, the DB password for SYS IS specified and correct - so I have no way to fix this.
    I cant find anyinformatin online where to look for log files, but there is nothing in sysman\log
    Now em console is saying "Conection refused" again, and the following process have killed themselves (as will I soon)
    OracleDBConsolercl Stoppped
    The others which I succeded in starting are still running. So TNSListener nor jobscheduler will start, and Consolerocl kills itself after a minute.
    Well, looks like I'm on my own on this one. Oracle will not intall on windows, and none seems to have noticed. Doing a day of googling reveals that all the log files which are supposed to live in sysman/log do not exist in this installation, so no help there.
    However, I did find an obscure log which says:
    The agentTZRegion value in C:\app\oracle\product\11.2.0\dbhome_1\wario_orcl/sysman/config/emd.properties is not in agreement with what agent thinks it should be.Please verify your environment to make sure that TZ setting has not changed since the last start of the agent.
    The TZ of the windows server is set to "UTC" at long time ago. There is nothing in the oralce windows installation guide to say "Do not use UTC, the most comon server time zone in europe". There is no mention of supported windows timezones.
    Now if Oracle doesnt support basic UTC, then we are all in trouble.
    There are hundreds of articles with this problem and how to solve it on Unix, but almost none for Windows. Do we have to solve Oracle installation bugs ourselves? Is there no support?
    Doing the below reveals that Oracle thinks that UTC is America/Rio_Branco. That HAS to be a bug.
    C:\app\oracle\product\11.2.0\dbhome_1\BIN>emctl config agent getTZ
    Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
    Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
    Unable to open file for logging. C:\app\oracle\product\11.2.0\dbhome_1/wario_orc
    l/sysman/log/emctl.log: Permission denied
    America/Rio_Branco
    So what next?
    The list of "supported" timezones in supportedtzs.list only lists UNIX timezones, and NO UTC!!!!!
    Googling this turns up nothing - noone on the planet seems to use UTC on their servers. I find this absolutely shocking.
    Windows server ONLY users UTC - it doesnt support GMT any more.
    So I have to now randomly try timezones in Windows which I dont want, which will be different from all the other servers in the Datacenter. It means all our reports will be out by 1 hour in summer ifI have to chose a timzeone which has daylight savings, compared with all the other databases which are UTC (not daylight savings).
    I would expect this from freeware maintained by one person in his garage.
    It seems that this Timezone issue emans Oracle will not run on windows.
    Tried a lot of things, including setting the timzeonse in windows to be "(UTC) Dublin, Edinburgh, Lisbon, London", which unfortuantely is not UTC (as it is affected by daylight savings).
    When you run
    "emctl config agent getTZ"
    you get:
    "Europe/London"
    The only oracle documentation I can find on this subject tells you to edit the emd.properties, and modify the agentTZRegion property, which doesnt exist.
    I tried the following command:
    "c:\app\oracle\product\11.2.0\dbhome_1\BIN>emctl resetTZ agent"
    Which tells you to execute:
    SQL> exec mgmt_target.set_agent_tzrgn('wario:3938','Europe/London')
    SQL> commit
    However, when I do this, I get:
    SQL> exec mgmt_target.set_agent_tzrgn('wario:3938','Europe/London')
    BEGIN mgmt_target.set_agent_tzrgn('wario:3938','Europe/London'); END;
    ERROR at line 1:
    ORA-20233: Invalid agent name wario:3938
    ORA-06512: at "SYSMAN.MGMT_TARGET", line 3811
    ORA-06512: at line 1
    Great. Obviosly, Im loggin in as SYS as no other users have been setup, and certainly I have not seen nor created nor set the password for "em repository user".

  • User Interface option not shown

    Just installed Adobe Creative Cloud ->Flash Professional CS6 --My question is, I'm trying to change the user interface to dark grey. the program installed in white. When I go to Edit->Preferences->General there is no "user interface" option. Anyone know how to fix this?

    Hi,
    You can install any CC application if you have a valid creative cloud subscription. Please try the following
    1. Install Adobe Creative Cloud desktop application from https://creative.adobe.com/products/creative-cloud
    2. Login with your Creative Cloud credentials
    3. Click on the Apps section where you will see the list of cc products for installation under FIND NEW APPS category
    4. You should find Flash Professional CC and Mobile Device Packaging for installation
    Thanks!
    Mohan

  • Just started using firefox seriously. my user interface does not look like the one in the 'tour'. please help

    i downloaded firefox a long time ago but havent used it extensively because i liked chrome. but recently chrome is just too difficult and if there is an issue i cant speak to anyone. so i am trying firefox. i went to take the user interface tour and there is suppose to be a button on the right hand side to help with bookmarks but my 'version' doesnt have that. was wondering how i get that and if i may have the wrong version.
    also....i cant seem to find where to turn autofill on and right now its not working except with the occasional email address.
    and one more thing....all streaming videos...tv, utube, art instruction..trailers...all get chunked up. nothing ever runs smoothly. and i am paying to get good download speed.
    i would appreciate any help on these three issues.
    thank you

    About the bookmark button:
    *[https://support.mozilla.org/en-US/kb/customize-firefox-controls-buttons-and-toolbars Customize toolbars]
    About versions of Firefox:
    *[http://www.mozilla.org/en-US/firefox/new/ Last Firefox Version]
    About the videos:
    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    *Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    *In the Firefox options window click the ''Advanced'' tab, then select "General".
    *In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    *Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    * [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    * [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Did this fix your problems? Please report back to us!
    Thank you.

  • User Interface Template not displaying correctly

    On some machines the user interface template is not displaying correctly (x is appearing instead of the images that make up the UI template). It does not seem to be a permissions related issue, as the same user can view the UI template on a different machine. It also doesn't seem to be a browser definitions issue as a different user on the same machine can view the UI template. Which leaves me at a loss for ideas...

    Where are your images being used in the UI template stored? I like to place my images in directory:
    <portalMidTier>/apache/apache/htdocs/img
    Then from within the UI template I can relatively reference the images as /img/logo.gif
    Regards,
    Candace

Maybe you are looking for