ColdFusion Developer roles

Hi,
I urgently required 2 ColdFusion Developer for 2 permanent roles based in central London. Ideally you will have 3+ years experience but less is considered if recent. Please send me an email if you are interested or if you know someone who is. Thanks
[email protected]

Yes you did and I am sure I replied, the client will not be able to sponsor I’m afraid and that was the only issue.
Regards
David

Similar Messages

Developer role able to edit a shared report that he did not create

Hi,
It seems like user with "BI Publisher Developer" role is able to edit a report
in shared folder that he has access to.
Question: How can I create a user who can develop/create/edit his own reports,
and have view only access to some shared reports and
have edit access to some other shared reports?
i.e I want a scenario where there are 2 folders in Shared folder say FolderA and FolderB.
I want to create a user who is a developer such that he can create reports under My Folder
for his personal use and also be able to create/edit reports under Shared/FolderA,
but have only view-only access to Shared/FolderB
Thanks

Moderator Action:
Same reaction as with your other triple multi-post:
https://forums.oracle.com/thread/2576361
Do not multi-post.
That's the same as if you were a spammer.
This one is also locked.
Stay with your post that is in the New To Java forum space.
Stay in the New To Java forum space until you are not a novice any longer.

Not able to create a new DC through NWDS with NWDI Developer role

Hi everyone,
My userid has NWDI Developer role assigned. I am trying to create a new Webdynpro DC under the software component defined in the configuration imported. It gives me an error after assigning the activity and pressing on Finish button.
I went through logs and found that it has some problems because I am not assigned the Lcr* role (this role should be in the NWDI Developer itself). I assigned the Lcr* role to my user id and tried to create the DC again. I am getting the same problem.
Please help.
Thanks,
Amber

Check out the following thread..
Re: SLD forbidden access
Your user id has to be assigned to the group JDI.develeopers
Regards
Krupa
Message was edited by: Krupakar Oleti

Developer Role on Sneak Preview Java SP 16

Hi,
I tried to enable the Java developer role for the new installed sneak preview WebAS Java sp16. However, I couldn't find the Java developer role. Could anybody help me to resolve this?
thanks in advance,
Chao-sheng

no:_).
it was not in the last one. Download the new one .

Java Development Role problems!

I have tried to add the java development role to a users account. I have added the following roles:
SAP_JAVA_NWADMIN_CENTRAL
SAP_JAVA_NWADMIN_LOCAL
Apparently they are meant to get a new tab but it does not appear. Am I adding the right roles?

Hi Phil,
See this link for help
http://help.sap.com/saphelp_nw04/helpdata/en/e2/75a74046033913e10000000a155106/frameset.htm
First, You have to create a logger.xml file in the Logger folder of your portal component
Then get a hold of that logger and write to it:
ILogger pLogger;
pLogger = PortalRuntime.getLogger("my_logger");
pLogger.info("testing");
Then, you can find this Logger in EP6 under : System Admin > monitoring > portal > Logging Console
Hope this helps
h

Need some tips for Database Developer Role.

Dear All,
Next week, I'm going to face an Interview for Database Developer role.
For this, I need some more & useful information on these recommended points.
1. Involve in a designing part of Data warehouse from
scratch
2. Create complex analytic queries on large data sets.
3. Analyse trends in key metrics.
4. Monitoring and optimizing the performance of the database.
Please help get the vital information on these points.
All help will be highly appreciated.
Thanks,

1. Involve in a designing part of Data warehouse from
scratch
Design Database...
This needs lot of information about business and its fonctionnalités, and so many.. Tables, relationships etc...
http://technet.microsoft.com/en-us/library/ms187099%28v=sql.105%29.aspx
Code Design...
SP's, Funcitions, Views, Sub queries, Joins, Triggers etc...
DW Design
DB size and number of reports and historical data details, reduce the normalization and etc....
http://technet.microsoft.com/en-us/library/aa902672%28v=sql.80%29.aspx
2. Create complex analytic queries on large data sets.
Its all based on your current database design, size, required output, data, performance etc..
4. Monitoring and optimizing the performance of the database.
Perfmon, Activity monitor, spotlight, custom queries, DMV's sp_whoisactive, execution plans, and many other thirdparty tools.. and may be best experience will give best view and clarity :)
Note : This is very big topic and its not easy to answer in few words or lines... :) goole it for more details...
Raju Rasagounder Sr MSSQL DBA

ColdFusion Developer version and web services

Hi,
Does anyone know if there is a known issue about Web Services
not running on
ColdFusion developer version?
I have been testing the most simple web services on 3
different live servers
and 3 different localhost servers with the same files and got
successful
results on all the live servers, but the same errors on all
the local
servers running on ColdFusion latest developer version. All 6
servers are
running on IIS either on Windows XP or 2000. Below is the
error I get when
I tested it locally:
Could not generate stub objects for web service invocation.
Name:
http://tutorial/ColdFusion/template/webservices/helloworld/helloworld.cfc?wsdl.
WSDL:
http://tutorial/ColdFusion/template/webservices/helloworld/helloworld.cfc?wsdl.
java.net.UnknownHostException: tutorial: tutorial It is
recommended that you
use a web browser to retrieve and examine the requested WSDL
document for
correctness. If the requested WSDL document can't be
retrieved or it is
dynamically generated, it is likely that the target web
service has
programming errors. The error occurred in
D:\tutorial\ColdFusion\template\webservices\helloworld\helloworld.cfm:
line
6
4 : method="getMessage"
5 : returnvariable="aString">
6 : <cfinvokeargument name="name" value="Rob"/>
7 : </cfinvoke>
8 :
Please let me know if you know anything about this.YC

If your developer edition is on your own machine you might be
having proxy server issues.
Find out what your proxy server is and enter it using the
proxyserver="" attribute in cfinvoke

Jav Developer role = Web Dynpro Content Explorer

Hi,
When i navigate to Java Developer role => Web Dynpro Content Explorer(Detailed Navigation) in portal I am getting following error. I am getting the same error in ESS and MSS pages also...
<b>
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com/sapportals/portal/pb/utils/RedirectData.
Exception id: 10:45_30/01/06_0023_2755950
See the details for the exception ID in the log file
</b>
When i look at log files ... I am getting the stack trace.
<b>
<< item 0 : >>#1.5#0002553A11CD00520000002D000A316000040B9554A2BD58#1138635904826#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#SMANCHAL#1017##nadcp949_LPD_2755950#SMANCHAL#107dd96091a711da84b30002553a11cd#SAPEngine_Application_Thread[impl:3]_0##0#0#Error#1#/System/Server#Java###Exception ID:10:45_30/01/06_0023_2755950
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: PortalRuntimeException
at com.sapportals.portal.prt.core.PortalRequestManager.handleRequestException(PortalRequestManager.java:921)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:803)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged1(Native Method)
at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java(Compiled Code))
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java(Compiled Code))
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Inlined Compiled Code))
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Compiled Code))
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java(Compiled Code))
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java(Compiled Code))
at com.sap.engine.services.httpserver.server.Client.handle(Client.java(Inlined Compiled Code))
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java(Compiled Code))
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java(Compiled Code))
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code))
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
at java.security.AccessController.doPrivileged1(Native Method)
at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
Caused by: java.lang.NoClassDefFoundError: com/sapportals/portal/pb/utils/RedirectData
at com.sapportals.portal.appintegrator.layer.HTTPRenderLayer.getPageRedirectObject(HTTPRenderLayer.java:282)
at com.sapportals.portal.appintegrator.layer.HTTPRenderLayer.processLayer(HTTPRenderLayer.java:101)
at com.sapportals.portal.appintegrator.LayerProcessor.processActionPass(LayerProcessor.java:173)
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doOnPOMReady(AbstractIntegratorComponent.java:71)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java(Compiled Code))
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java(Compiled Code))
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java(Compiled Code))
at com.sapportals.portal.prt.pom.PortalNode.processEventQueue(PortalNode.java(Compiled Code))
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:652)
... 23 more
</b>
Can you please help me with this...

Hi Gary,
> Now do I put this back in original directory
Rrrighty.
> do I need to add back .bak or leave as .par?
Leave as PAR. If the server starts, all .par files within this directory get deployed and in the case of success, .bak gets added. So .par.bak files are not deployed again on the next startup.
> do I need to delete original
> then add my updated version?
I think you don't need to delete the original, but just do it. If your changed .par file get deployed successfully, it will overwrite the old .par.bak anyhow.
But make a security copy of the orginal file for the case that you have changed the original PAR in some strange way
Hope it helps
Detlev

ColdFusion Developer Week - 4th to 8th June, 2012

Hi All,
We are conducting the 2nd ColdFusion Developer week happening from 4th – 8th June 2012. (Register here: http://adobe.com/go/cfdeveloperweek )
With the launch of ColdFusion 10, we are back with the 2nd ColdFusion Developer Week, a series of free, live webinars hosted by seasoned ColdFusion experts. The webinars cover a wide range of topics, from what ColdFusion is and how to code it, to more in-depth topics related to CF10- HTML5, REST, ORM, Security enhancements and more.
If you are a new developer, someone with little or no ColdFusion experience, or even if you have been using ColdFusion all your life, these sessions are ideal for you. The ColdFusion Developer Week provides something for everyone so sign up now (http://adobe.com/go/cfdeveloperweek)

Hi All,
We are conducting the 2nd ColdFusion Developer week happening from 4th – 8th June 2012. (Register here: http://adobe.com/go/cfdeveloperweek )
With the launch of ColdFusion 10, we are back with the 2nd ColdFusion Developer Week, a series of free, live webinars hosted by seasoned ColdFusion experts. The webinars cover a wide range of topics, from what ColdFusion is and how to code it, to more in-depth topics related to CF10- HTML5, REST, ORM, Security enhancements and more.
If you are a new developer, someone with little or no ColdFusion experience, or even if you have been using ColdFusion all your life, these sessions are ideal for you. The ColdFusion Developer Week provides something for everyone so sign up now (http://adobe.com/go/cfdeveloperweek)

Coldfusion Developer sought

We have an immediate need for a Coldfusion developer for an 8
month project in CT. If interested, please contact me at:
[email protected]

whooopsies! I figured out what I was doing wrong. Noob
mistake -- rather than browsing to my files using
http://localhost:portnumber/directory
.... I was trying to just right click on my .cfm files on my hard
drive and open them in my browser....
C:\CFusionMX7\wwwroot\examples\variables_form.cfm -- in which case,
obviously the browser didn't know to route the files to the port of
the ColdFusion server, and thus wasn't compiling the code...

ColdFusion Developer stop functioning!

Hello all,
Yesterday, I installed ColdFusion Developer Edition and it
was working fine for about a hour. Then, suddenly it completely
stopped working. I know the code is correct because I uploaded my
document to a remote server with ColdFusion support and everything
worked correctly.
All I'm doing is simply defining a variable with
<cfset> and calling it with <cfoutput>, and for
whatever reason the ColdFusion server is now it seems like the code
is never even getting to the ColdFusion server because when I look
at the "view > source" in internet explorer, the <cf> tags
appear for the client to see.
What might have caused ColdFusion to stop functioning all of
a sudden? How can I get it working again? I have already tried
uninstalling, and reinstalling, and installing the MX 7.2 update,
and it still isn't working. Is there some way to reset everything
within ColdFusion? I'm basically at a loss here, any help would be
greatly appreciated.
Thank you,
Brian

whooopsies! I figured out what I was doing wrong. Noob
mistake -- rather than browsing to my files using
http://localhost:portnumber/directory
.... I was trying to just right click on my .cfm files on my hard
drive and open them in my browser....
C:\CFusionMX7\wwwroot\examples\variables_form.cfm -- in which case,
obviously the browser didn't know to route the files to the port of
the ColdFusion server, and thus wasn't compiling the code...

ColdFusion Developer site for sale

Post removed: Site Sold

Two questions - why are you moving away from cf development
and, are
exisiting clients part of the deal?
"spindiggy" <[email protected]> wrote in
message
news:estd25$338$[email protected]..
> Hello,
> I am moving away from ColdFusion Development. The site
design,
> hotfuzion.com,
> hotfuzion.net, the cms and shopping cart are all for
sale as a package
> deal.
> I'm looking for around $500.00 for all. If interested,
let me know.
> [email protected]
>
> Chris
>

ChaRM Test Message SDTM - Tester role cannot be same as the developer role

Hi Experts,
When the developer raise a test message SDTM, The developer couldn't confirm the message as we get a warning as
" Tester role cannot be same as the developer role "
We cheked the roles of developer and tester, they were not same .
We checked the Assign conditions in SDTM, But it doesnt have any values.
Advance thanks to all those replies.
Best regards,
Vin

Hi Friend
System check the name in the ticket or the BP for the person of Tester and Developer
Every person has unique BP so if the same name is entered in the ticket as Tester and developer then system will give you this warning.Since SAP recommendation is to have Dev and Tester 2 diff person.
You can ignore the same if Tester and Developer is the same person and might be you have technically created different roles for the same.
Hope it clarifies.
Regards
Prakhar

Developer Role for CRM Functional Team

Hello,
I would like to have your inputs on creating a developer role for CRM Functional Team in Dev system.
I found a standard role SAPCRM_DEVELOPER , does it has sufficient Authorisations to carry out the config work in CRM or do we need any more additional Auth.
The team members also have IC AgentIC ManagerSrv Pro roles as well.
Thanks in advance
regards
sam

Hi,
You don't need a role to development team. You can assign the auth. in dev system and perform the tests in the specifics roles.
Best regards,
Caíque Escaler

Developer roles

Hi,
The development staff require access to multiple schema objects on the db but I am loathed to assign the 'ALL' to the DDL privileges as I would like to
restrict access to a specific schema without limiting the developers to their own schema.
Presently i given the below privileges, Please tell me developer point of view which privileges is required?
GRANT EXECUTE ANY PROCEDURE TO DEVELOPER_ROLE;
GRANT DROP ANY TRIGGER TO DEVELOPER_ROLE;
GRANT DROP ANY VIEW TO DEVELOPER_ROLE;
GRANT ALTER ANY SEQUENCE TO DEVELOPER_ROLE;
GRANT CREATE ANY INDEXTYPE TO DEVELOPER_ROLE;
GRANT CREATE TRIGGER TO DEVELOPER_ROLE;
GRANT EXECUTE ANY PROGRAM TO DEVELOPER_ROLE;
GRANT ALTER ANY PROCEDURE TO DEVELOPER_ROLE;
GRANT CREATE SEQUENCE TO DEVELOPER_ROLE;
GRANT SELECT ANY SEQUENCE TO DEVELOPER_ROLE;
GRANT ALTER ANY TRIGGER TO DEVELOPER_ROLE;
GRANT EXECUTE ANY TYPE TO DEVELOPER_ROLE;
GRANT ALTER ANY TABLE TO DEVELOPER_ROLE;
GRANT CREATE VIEW TO DEVELOPER_ROLE;
GRANT CREATE ANY INDEX TO DEVELOPER_ROLE;
GRANT DROP ANY INDEX TO DEVELOPER_ROLE;
GRANT CREATE TYPE TO DEVELOPER_ROLE;
GRANT ALTER ANY INDEX TO DEVELOPER_ROLE;
GRANT CREATE ANY PROCEDURE TO DEVELOPER_ROLE;
GRANT DROP ANY INDEXTYPE TO DEVELOPER_ROLE;
GRANT CREATE ANY MATERIALIZED VIEW TO DEVELOPER_ROLE;
GRANT CREATE ANY SYNONYM TO DEVELOPER_ROLE;
GRANT CREATE ANY SEQUENCE TO DEVELOPER_ROLE;
GRANT CREATE INDEXTYPE TO DEVELOPER_ROLE;
GRANT EXECUTE ANY INDEXTYPE TO DEVELOPER_ROLE;
GRANT DROP ANY TYPE TO DEVELOPER_ROLE;
GRANT CREATE MATERIALIZED VIEW TO DEVELOPER_ROLE;
GRANT DEBUG ANY PROCEDURE TO DEVELOPER_ROLE;
GRANT CREATE ANY VIEW TO DEVELOPER_ROLE;
GRANT ALTER ANY TYPE TO DEVELOPER_ROLE;
GRANT CREATE ANY TRIGGER TO DEVELOPER_ROLE;
GRANT CREATE ANY TYPE TO DEVELOPER_ROLE;
GRANT DROP ANY SEQUENCE TO DEVELOPER_ROLE;
GRANT DROP ANY TABLE TO DEVELOPER_ROLE;

Hi;
There is no specific answer for your question, you can create some role which can create function or procedure etc. You can give some basic grant to developer role and than you can add new grant in that role or can create one other new role for your developers
Regard
Helios

ColdFusion Developer roles

Similar Messages

Maybe you are looking for