Coldfusion in solaris 10
Hi ,
Can I install coldfusion in solaris 10 ? my system architecture is
-bash-3.00# isainfo -kv
64-bit amd64 kernel modules
Pls suggest me
thanks
Google. Search using keyword "coldfusion" without any reference to Solaris at all.
Find Adobe and their web resources for their+ product.
It was the first result from the Google search.
See:
[http://www.adobe.com/products/coldfusion/systemreqs/]
It seems you need a SPARC-based system, not the x86-based one you currently have.
You'll have to buy a different computer.
(It took me all of 30 seconds to do that search)
Similar Messages
-
It doesnt seem like CF8 will install on Solaris 10 even
though it says it will. I have tried to install using the
instructions from Adobe's website but i keep getting the following
error:
./Coldfusion-8-sol.bin:
/tmp/install.dir.26470/Solaris/resource/jre/bin/java: cannot
execute
Has anyone gotten CF8 or CF 7 to work on Solaris 10 64-bit
system? I work for a company who wants to buy 12 licenses but if we
cant get it to work on Solaris 10 it wont do us any good. Can
someone help../Coldfusion-8-sol.bin -i console
Preparing to install...
Checking for POSIX df.
Found POSIX df.
Checking tail options...
Using tail -n 1.
True location of the self extractor:
/home/zone65/software/coldfusion8/Coldfusion-8-sol.bin
Creating installer data directory: /tmp/install.dir.538
Creating installer data directory:
/tmp/install.dir.538/InstallerData
Gathering free-space information...
Space needed to complete the self-extraction: 2268324 blocks
Available space: 13914152 blocks
Available blocks: 13914152 Needed blocks: 2268324 (block =
512 bytes)
Computed number of blocks to extract: 2077
Extracting the JRE from the installer archive...
Extracting JRE from ./Coldfusion-8-sol.bin to
/tmp/install.dir.538/Solaris/resource/jre_padded ...
Extracting done, exit code = 0
Extracting JRE from
/tmp/install.dir.538/Solaris/resource/jre_padded to
/tmp/install.dir.538/Solaris/resource/vm.tar.Z ...
Extracting done, exit code = 0
Unpacking the JRE...
Unpacking the JRE...
gzip is hashed (/usr/bin/gzip)
GZIP done.
TAR done.
Extracting the installation resources from the installer
archive...
Extracting install.zip from ./Coldfusion-8-sol.bin to
/tmp/install.dir.538/InstallerData/installer.padded ...
Extracting to padded done, exit code = 0
Extracting from padded to zip done, exit code = 0
Creating disk1 data directory:
/tmp/install.dir.538/InstallerData/Disk1
Creating instdata data directory:
/tmp/install.dir.538/InstallerData/Disk1/InstData
Extracting resources from ./Coldfusion-8-sol.bin to
/tmp/install.dir.538/InstallerData/Disk1/InstData/Resource1.zip ...
Extracting done, exit code = 0
Configuring the installer for this system's environment...
========= Analyzing UNIX Environment
=================================
Setting UNIX (sunos) flavor specifics.
Importing UNIX environment into LAX properties.
Checking for POSIX awk.
========= Analyzing LAX
==============================================
LAX found............................ OK.
LAX properties read.................. OK.
========= Finding VM
=================================================
Valid VM types.......................... J1 J2 MSJ MRJ
Absolute LAX_VM path....................
/tmp/install.dir.538/Solaris/resource/jre/bin/java
Expanded Valid VM types................. JRE_J1 JDK_J1 JRE_J2
JDK_J2 MSJ MRJ
* Using VM.....(lax.nl.current.vm)......
/tmp/install.dir.538/Solaris/resource/jre/bin/java
========= Virtual Machine Options
====================================
LAX properties incorporated............. OK.
classpath...............................
"/tmp/install.dir.538/InstallerData:/tmp/install.dir.538/InstallerData/installer.zip"
main class..............................
"com.zerog.ia.installer.Main"
.lax file path..........................
"/tmp/install.dir.538/temp.lax"
user directory..........................
"/tmp/install.dir.538"
stdout to............................... "console"
sterr to................................ "console"
install directory....................... ""
JIT..................................... none
option (verify)......................... off
option (verbosity)...................... none
option (garbage collection extent)...... none
option (garbage collection thread)...... none
option (native stack max size).......... none
option (java stack max size)............ none
option (java heap max size)............. 100663296
option (java heap initial size)......... 16777216
option (lax.nl.java.option.additional).. none
========= Display settings
===========================================
X display............................... not set
UI mode................................. console
Launching installer...
========= VM Command Line
============================================
options: -Djava.compiler=NONE -Xmx100663296 -Xms16777216
CLASSPATH:/tmp/install.dir.538/InstallerData:/tmp/install.dir.538/InstallerData/installer. zip:
========= Forking JAVA
=============================================
./Coldfusion-8-sol.bin:
/tmp/install.dir.538/Solaris/resource/jre/bin/java: cannot execute -
Problem with coldfusion installation on Solaris
Dear all,
Can any of you please help on installing coldfusion 8 setup on solaris.
I am getting the following error when I perform coldfusion installation
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
../coldfusion-61-sol.bin:
/tmp/install.dir.1997/Solaris/resource/jre/bin/java: cannot execute
Please help...It is an urgent issue.Hi
Thank you for replay
This is happened exactly when I zlogin for first time to complete installation.
The installation procedure flow flawless.I set terminal type 13 (dt terminal) and everything is OK, but when I try to setup hostname I�ve got this error.
I try this with 3 different zones on this machine with same result
I have old x86 machines with solaris 11/06 zones installed , everything works fine (1 year uptime)
This is not the first zone in my life :)
Best Regards
DJ JAM -
Can I use coldfusion 8 standard version in Sun / Solaris?
Hi,
I would like to know if I can use coldfusion 8 standard
version in Sun / Solaris
Thank you.banguitainf wrote:
> Hi,
>
> I would like to know if I can use coldfusion 8 standard
version in Sun / Solaris
No.
http://www.adobe.com/products/coldfusion/systemreqs/#support_matrix
Mack -
Apache configuraiton with coldfusion 8 on unix (Solaris 5.10) issue
Hello,
Not able to run my application after configuration of apache with cf8. Below are the details:
Below is my apache connector file
apache_connector.sh
../../runtime/bin/wsconfig \
-server coldfusion \
-ws Apache \
-dir /etc/apache2 \
-bin /usr/apache2/bin/httpd \
-script /usr/apache2/bin/apachectl \
-coldfusion
exit $#
I run the apache connector file and found following info.
./apache_connector.sh
Server version: Apache/2.0.63
Server version: Apache/2.0.63
Server version: Apache/2.0.63
Server version: Apache/2.0.63
Server version: Apache/2.0.63
Restarted Apache server
The Apache connector was installed to /etc/apache2
After that I have added the virtual host in httpd.conf file and restart the apache server. But my application is not running.
Thanks in advance.
Regards
MahendraI am using solaries 10 SPARC 64bit version.
I have not found any error message in CF logs.
After installing apache connector the following code has been added by installation process.
LoadModule jrun_module /ppd_app/coldfusion8/runtime/lib/wsconfig/1/mod_jrun20.so
<IfModule mod_jrun20.c>
JRunConfig Verbose false
JRunConfig Apialloc false
JRunConfig Ignoresuffixmap false
JRunConfig Serverstore /ppd_app/coldfusion8/runtime/lib/wsconfig/1/jrunserver.store
JRunConfig Bootstrap 127.0.0.1:51011
#JRunConfig Errorurl url <optionally redirect to this URL on errors>
#JRunConfig ProxyRetryInterval 600 <number of seconds to wait before trying to reconnect to unreachable clustered server>
#JRunConfig ConnectTimeout 15 <number of seconds to wait on a socket connect to a jrun server>
#JRunConfig RecvTimeout 300 <number of seconds to wait on a socket receive to a jrun server>
#JRunConfig SendTimeout 15 <number of seconds to wait on a socket send to a jrun server>
#JRunConfig RecvTimeout 300 <number of seconds to wait on a socket receive to a jrun server>
#JRunConfig SendTimeout 15 <number of seconds to wait on a socket send to a jrun server>
AddHandler jrun-handler .jsp .jws .cfm .cfml .cfc .cfr .cfswf
</IfModule>
I have made changes in httpd.conf file for virtualhost as follows:
NameVirtualHost *:80
<VirtualHost *:80>
ServerName ppddev.equant.com
ServerAlias ppddev.equant.com ggndppda1.tb.ores.del.equant.com
DocumentRoot /ppd_app/webapp
</VirtualHost> -
Unable to initialize Graphing service in Solaris 9 using ColdFusion MX 7
Upgraded from CMFX 6,1,0,63958 to CMFX 7.0.2 on Solaris 2.9
No errors during upgrades. Upon starting the CMFX 7, I am
seeing this in the cfserver.log. I cannot reach the CFMX
administrator page.
07/07 15:55:44 Information [main] - Starting graphing...
07/07 15:55:44 Error [main] - Unable to initialize Graphing
service: java.lang.InstantiationError: com.gp.image.server.IcMap
I have tried different work-arounds but have not been
successful...
http://www.adobe.com/go/ceb0e519
http://www.adobe.com/go/tn_18747
Here is my jvm.config:
# Arguments to VM
java.args=-server -Xmx512m -Dsun.io.useCanonCaches=false
-XX:MaxPermSize=128m -XX:+UseParallelGC -Djava.awt.headless=true
-Dco
ldfusion.rootDir={application.home}/
-Dcoldfusion.classPath={application.home}/lib/updates,{application.home}/lib,{application
.home}/gateway/lib/,{application.home}/wwwroot/WEB-INF/cfform/jars
-Dcoldfusion.libPath={application.home}/libUpgraded from CMFX 6,1,0,63958 to CMFX 7.0.2 on Solaris 2.9
No errors during upgrades. Upon starting the CMFX 7, I am
seeing this in the cfserver.log. I cannot reach the CFMX
administrator page.
07/07 15:55:44 Information [main] - Starting graphing...
07/07 15:55:44 Error [main] - Unable to initialize Graphing
service: java.lang.InstantiationError: com.gp.image.server.IcMap
I have tried different work-arounds but have not been
successful...
http://www.adobe.com/go/ceb0e519
http://www.adobe.com/go/tn_18747
Here is my jvm.config:
# Arguments to VM
java.args=-server -Xmx512m -Dsun.io.useCanonCaches=false
-XX:MaxPermSize=128m -XX:+UseParallelGC -Djava.awt.headless=true
-Dco
ldfusion.rootDir={application.home}/
-Dcoldfusion.classPath={application.home}/lib/updates,{application.home}/lib,{application
.home}/gateway/lib/,{application.home}/wwwroot/WEB-INF/cfform/jars
-Dcoldfusion.libPath={application.home}/lib -
Is Adobe Coldfusion Enterprise V10 supported by Solaris 11 OS?
Hi
I have a customer looking at Colfusion Enterprise but want it to run on a Solaris v11 Operating System. There appears to be some confusion in some of the tech specs that it may not be, so am looking for clarification.
thanksHello,
Thank you for your post. You can try to install CF10 Enterprise on Sun Solaris 10 for SPARC, however the same is officially not supported by Adobe.
Regards,
Anit Kumar -
How do I create a kerberos ticket using coldfusion
I have 3 apps on our intra net that require authentication and would like to use kerberos to accomplish this. This is my set up.
users log in to the network and authenticate via active directory (all windows based) , Our web apps are on a box running solaris 10, weblogic app server, cf 9 and oracle 11g. A group of our web apps on this sever require users to authenticate through oracle (not the web / app server).
I can authenticate with kerberos via a putty session on the server with no problems.
USEING COLDFUSION, how do i request a kerberos ticket and pass the necessary credentials to authenticate.?
can this be done.?
I am looking for a CODE SAMPLE OF HOW DO THIS IN A UNIX environment NOT WINDOWS.
I appologize for the frustrated tone of this post. However, after a week of reading documentation til my eyes bleed, to end up chasing my tail with no truly help info............
TIA
JBThis is something your web server should do, not CF. Configure your web server to participate in the Kerberos realm. If WebLogic is the web server (and not just the application server) configure that:
http://download.oracle.com/docs/cd/E13222_01/wls/docs81/secmanage/sso.html
If you have WebLogic configured to use Apache as a web server, configure that:
http://modauthkerb.sourceforge.net/
http://support.microsoft.com/kb/555092
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/ -
Apache mod_rewrite CGI Variables in ColdFusion
I have an environment that consists of Apache 2.2.8 and ColdFusion 8 running on Solaris 10.
I am attempting to pass a CGI variable to ColdFusion as part of an Apache Rewrite rule, however I am not able to do so.
The Rewrite rule set exists as follows:
RewriteCond %{SSL:SSL_PROTOCOL} ^TLSv1$
RewriteCond %{HTTP_REFERER} !^$ [NC]
RewriteRule ^.*$ %{HTTP_REFERER}?result=pass [L,R,E=HTTP_MYVAR:rw]
The rule set works with the exception of the availability of the CGI variable HTTP_MYVAR within the ColdFusion CGI scope.
I am testing for the existance of the variable within ColdFusion as follows:
<cfif (structkeyexists(cgi, 'CGI.HTTP_MYVAR'))>
CGI.HTTP_MYVAR exists as:<cfoutput>#CGI.HTTP_MYVAR#</cfoutput>
<cfelse>
CGI.HTTP_MYVAR does not exist.
</cfif>
Does anyone have experience creating variables in an Apache Rewrite rule set and evaluating them in ColdFusion?
Thanks in advance for any assistance.OK, as part of my work-avoidance for the day, I have replicated the work I did in NZ on my other laptop.
I put this in httpd.conf
Alias /junk C:/webroots/junk
<Directory "C:/webroots/junk">
Options Indexes FollowSymLinks
AllowOverride None
Order allow,deny
Allow from all
RewriteEngine on
RewriteBase /junk/
RewriteRule (.*) $1 [E=MYCUSTOMVARIABLE:mycustomvalue]
</Directory>
And my test code is this:
<cfoutput>
CGI.MYCUSTOMVARIABLE = [#CGI.MYCUSTOMVARIABLE#]<br />
</cfoutput>
I restart Apache, run the template, and I get this:
CGI.MYCUSTOMVARIABLE = [mycustomvalue]
How does this differ from what you're doing?
Adam -
Upgrade Coldfusion 8 Multiserver to Coldfusion 9 Multiserver
So I am working on a new web environment that we are planning to rollout in January and I have all of the servers setup, configured and ready to go. They are running CF 8 multiserver and everything runs pretty great right now. Now that coldfusion 9 is out management wants to go live with the new web environment on CF 9 so as not to start off behind a version.
Platform:
Solaris 10 (64 bit) : Apache 2.2.10 (64 bit) : Cf 8.0.1
My question then is is there anyway to just upgrade 8 to 9 or do I have to jump through all of the archive, uninstall, reinstall and restore hoops? Is there an easy method for upgrading the multiserver install?
The oh so incredible documentation alludes to the possibility of upgrading.
"The ColdFusion installation process supports the following scenarios:
New installation Install ColdFusion on a computer with no earlier ColdFusion installation.
Upgrade installation
You can upgrade from ColdFusion MX 7 and ColdFusion 8. When upgrading, the installer preserves the existing settings and installs in a new directory, automatically assigning ports that do not conflict with the existing installation."
I have to assume that this "upgrade" is only possible for single server installs since the multiserver option is grayed out when you run the installer.
I thought that I would post something here before I went full bore into trying to do it with the archive restore method (which I am hoping will work.)
Thanks in advance for any input.
Steve{Repost. Not sure what happened on that first posting.}
So I am working on a new web environment that we are planning to rollout in January and I have all of the servers setup, configured and ready to go. They are running CF 8 multiserver and everything runs pretty great right now. Now that coldfusion 9 is out management wants to go live with the new web environment on CF 9 so as not to start off behind a version.
Platform:
Solaris 10 (64 bit) Apache 2.2.10 (64 bit) Cf 8.0.1
My question then is is there anyway to just upgrade 8 to 9 or do I have to jump through all of the archive, uninstall, reinstall and restore hoops? Is there an easy method for upgrading the multiserver install?
The oh so incredible documentation alludes to the possibility of upgrading.
"The ColdFusion installation process supports the following scenarios:
New installation
Install ColdFusion on a computer with no earlier ColdFusion installation.
Upgrade installation
You can upgrade from ColdFusion MX 7 and ColdFusion 8. When upgrading, the installer preserves the existing settings and installs in a new directory, automatically assigning ports that do not conflict with the existing installation."
I have to assume that this "upgrade" is only possible for single server installs since the multiserver option is grayed out when you run the installer.
I thought that I would post something here before I went full bore into trying to do it with the archive restore method (which I am hoping will work.)
Thanks in advance for any input.
Steve -
Upgrading to solaris 8 using a profile file
I have successfully upgraded from Solaris 7 to 8 on an E250, maintaining the integrity of my previous applications. Is there a way to use a profile file so that the upgrade is �hands-free?� I can do this already via a jumpstart server, but is there a way to do it while booting from the Solaris 8 CD???
Thanks in advance,
KevinI've never had any issues with CF8 locking on emails, we send thousands without any issues.
As for the script I have honestly never tried restarting CF from itself, but I'd try calling a Powershell script, which can do the restart in one move:
get-service | ?{$_.name -match "Coldfusion 8 Application Server"} | restart-service
Haven't tried it but that'd be a good place to start I reckon.
O. -
HOWTO Patch JRE on Solaris 8 on SPARC
Hello, I have been blessed with inheriting a fleet of Solaris 8 boxes which I have to patch for Java/JRE vulrenabilities.
Does anyone know of a HOWTO on how to do that. I just exploded the new JRE version in /usr and changed the link /usr/bin/java to point to /usr/j2res/bin/java. Now when I type java -version, it displays the new version.
However, due to my lack of Solaris knowledge, I am not sure it thats the correct way. I see that there are some coldfusion pricesses that are running on the machine and not sure it they are gradding the right new JRE version.
All you help and advise appreciated.Hi,
Was there any workarounds for this problem?
I am facing the same with Netscape 4.78 & 4.79 on Solaris with Java plugin 1.3.1
Any workarounds/soultions?
I have a Sun Sparc running Solaris 8 Rel 1/01 with JRE
1.3.1 and Netscape 4.78. I set NPX_PLUGIN_PATH to
/usr/j2se/jre/plugin/sparc/ns4:$MOZILLA_HOME/plugins.
When I look at "about:plugins" in Netscape, I see the
"Java (TM) Plug-in 1.3.1" but none of the plugins are
Enabled. Any ideas??? -
CF8 on Solaris 10 - disk space error
Trying to install CF8 on a Solaris 10 box (with zones). The binary installer gives the following error:
: root: /var/tmp> ./Coldfusion-8-sol.bin
Preparing to install...
WARNING: /tmp does not have enough disk space!
Attempting to use / for install base and tmp dir.
expr: non-numeric argument
WARNING! The amount of / disk space required to perform
this installation is greater than what is available. Please
free up at least 0 kilobytes in / and attempt this
installation again. You may also set the IATEMPDIR environment
variable to a directory on a disk partition with enough free
disk space. To set the variable enter one of the following
commands at the UNIX command line prompt before running this
installer again:
- for Bourne shell (sh), ksh, bash and zsh:
$ IATEMPDIR=/your/free/space/directory
$ export IATEMPDIR
- for C shell (csh) and tcsh:
$ setenv IATEMPDIR /your/free/space/directory
: root: /var/tmp> IATEMPDIR=/var/tmp
: root: /var/tmp> echo $IATEMPDIR
/var/tmp
: root: /var/tmp> ls -l
total 756849
-rwxr-xr-x 1 root root 387179372 Nov 5 14:53 Coldfusion-8-sol.bin
: root: /var/tmp> df -k
Filesystem kbytes used avail capacity Mounted on
/ 0 2762463 467923523 1% /It is Ok to start, but I suggest you to read the:
Oracle® Database Installation Guide
10g Release 2 (10.2) for Solaris Operating System (x86)
Part Number B15697-01
for further requirements and a complete step by step guide.
~ Madrid. -
Regarding Cold Fusion8 installation in Solaris environment.
we use Cold Fusin 6 on Solaris platform with Iplanet web server.
We had the plan to upgrade it to Cold Fusion8. So i have installed cold fusion 8 which preserves the existing settings and installs in a new directory, After insallation it is allowing me to start the coldfusion with root permission only. But this root permisssion is granted for us for the sake of installation alone for few days. We will be having only the application user permissions.
How can we make it to start cold fusion with application user previlege? Do we need to make configuration changes so it can be started by the application user id. (Note : We use to do start the cold fusion 6 with appl user only)
Is it required to install the cold Fusion8 with Root permissions?
One more thing i would like to mention here that during installation i didnt choose any runtime user when it is specifically asked. So the default runtime user has been selected.It is "nobody".
Thanks in advance. Appreciate your earliest response.
Regards
SudhaYou might try setting ORACLE_SID=EPRC.
-
Missing data in server monitor under linux and solaris
Some metrics are not displayed in our environments, specifically under the statistics tab, request statistics, active coldfusion thread, we always have a zero line. Also under memory usage, "cf threads by memory usage" is always empty. I have all three buttons at the top checked so they are monitoring. Is there something else I'm doing wrong?
Environment 1 : dell2850->centos5->vmware->centos5->32bitJDK5->tomcat6->coldfusion8
Environment 2 : sun5120->solaris10->64bitJDK5->tomcat6->coldfusion8
I'm specifically wanting thread info to check if I should increase the defaults in CFIDE configuration. Most everything on the server is being delivered faster now that we are using a 64bit JVM and have moved to solaris in production (from windows). But there are some sections of our cfm logic that are taking much longer now (2000% longer)
Thanks
AhnjoanHi all,
does anyone can write some info why java Threads are
recorded in the list of process (ps -ef) when you run
on a Linux box, but not the same when you run on
Solaris ? Which Thread support is more
performant/stable that on Linux or that on Solaris?
Thanks
FrancescoLinux treats kernell threads as light weight processes and displays them as if they are actual processes - they of course are not, so the results of 'ps' can be misleading. Solaris fully differentiates between its three concepts of threads, lightweight processes and processes and 'ps' only shows actual processes.
Both implementations in Linux and Solaris perform well.
By the way, Solaris 8 has an optional, slightly different thread model than earlier versions of Solaris (in fact it is more like NT's) and that can be more efficient for JVM's or other multithreaded systems running on SMP systems. It can also be worse - your mileage may vary.
Maybe you are looking for
-
ORA-00942 error when exporting db
Hi, Has anyone encountered the following error before? Kindly help. Connected to: Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production With the Partitioning, OLAP and Oracle Data Mining options JServer Release 9.2.0.7.0 - Production Export done
-
Secret Questions reset e-mail doesn't send
Hi there! I wanted to reset my secret questions because I forgot them, so I chose the option to resend the security information. Unfortunately, I do not receive that e-mail. I already changed my e-mail (which had no effect) + its also not in my SPAM
-
Planning data sources configuration error
Hi, We have installed epm 11. Within workspace there is the option to manage planning data sources. When this is run a couple of error messages appeared saying the awb database is not running another about the configuration not being correct. All the
-
Listen for Events from anywhere
Hello! I have an application with a rather complicated component hierarchy. How can I have it so that I can listen for events from any component in any component, regardless of who is who's child? Thank you!
-
Can any one solve this problem
when i sent request to the jsp using struts1.1 this error occurred. i couldn't understand this error. can any one let me know when such error comes and let me Know how to solve this error. type Exception report message description The server encounte