Coldfusion Index Page issue

Hi All,
I am new to Coldfusion. I have just migrated to Coldfusion,
from Oracle about 2 months back. Currently in the process of
enhancing an application on Coldfusion & Oracle.
The issue i am facing is rather strange. The Index.html and
MainContent.html, page in my applications main page contain links
to 5 other applications (All part of this one application).
For Eg:
Index.html
Appl1
App2
App3
App4
App5
MainContent.html
Appl1
App2
App3
App4
App5
However, on the UAT environment, though the Index and
Maincontent, contained the same contents, they did not display them
all. Strangely on accesing the application, the main page just
shows up as ....
App1
App3
App4
Strange .. but thats exactly what's happenning! Could anyone
let me know, if this is a configuration issue or something, that i
can reset. All the rest remain the same, in both Dev and UAT. I
have my UAT beginninig tomorrow, thus, in frantic need of
suggestions.
Thanks and Regards,
Jay
Text
Index.html
Text

quote:
Originally posted by:
William At FAA
Second of all I have no idea what the Hell UAT is. As far as
.html pages being served incorrectly, have you tried re-uploading
the file. Clearing your browser cache?
I'm pretty sure he is discussing
User
Acceptance
Testing environment, which is a term that can be used by
Universities to describe a closed testing environment.
Basically, the equivalent of what we usually would refer to
as a Dev Server or even Test Site.

Similar Messages

Unable to access java web application index page on Weblogic server 10.3.6

Hi,
I have deployed a Web application on Weblogic server.
My war file is very basic with just a index page.
I am able to deploy & access its index page properly in OC4J ( applicaton server on soa suite 10g ) and apache tomcat.
But when i deployed same war file in weblogic am not able to access its index page, Getting below error:
Error 503--Service Unavailable
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
*10.5.4 503 Service Unavailable*The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay may be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
status=Prepared, Consolidated State=Prepared, Target-Specific State= Prepared.
what does Prepared indicates here?*
Adminserver.log prints blow log when i try to access the index page
####<Dec 26, 2012 8:27:17 AM GMT> <Warning> <netuix> <soa-app-dev-01.am.health.ge.com> <AdminServer> <[ACTIVE] ExecuteThread: '21' for queue: 'weblogic.kernel.Default (self-tuning)'> <501226496> <> <9b375c7445d8c121:79ee4f70:13bc880be7a:-8000-0000000000000209> <1356510437306> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=WebAppApplicationOverviewPage&WebAppApplicationOverviewPortlethandle=com.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3D*Weblogs*%2CType%3DAppDeployment%22%29.>
My Deployment descriptors are as below:
Web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" id="WebApp_ID" version="2.5">
<display-name>Weblogs</display-name>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
</welcome-file-list>
<servlet>
<description></description>
<display-name>SOA11gLogServlet</display-name>
<servlet-name>SOA11gLogServlet</servlet-name>
<servlet-class>com.ge.healthcare.soa.logs.SOA11gLogServlet</servlet-class>
</servlet>
</web-app>
==================================================================
weblogic.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-web-app xmlns:wls="http://xmlns.oracle.com/weblogic/weblogic-web-app" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd http://xmlns.oracle.com/weblogic/weblogic-web-app http://xmlns.oracle.com/weblogic/weblogic-web-app/1.3/weblogic-web-app.xsd">
<wls:weblogic-version>10.3.6</wls:weblogic-version>
<wls:context-root>/Weblogs</wls:context-root>
</wls:weblogic-web-app>
==================================================================
Please help me to resolve the issue,its bit urgent.Let me know in case of anything else required to check and verify.
Thanks in advance.
Regards,
Rahul Aahir
Edited by: 978673 on Dec 26, 2012 4:22 PM
Edited by: 978673 on Dec 26, 2012 4:32 PM

In weblogic 10.3.6, when you deploy using console, you have to click on start button which appears in Deployments page.
Your weblogic.xml file should be as below:
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-web-app xmlns:wls="http://xmlns.oracle.com/weblogic/weblogic-web-app" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd http://xmlns.oracle.com/weblogic/weblogic-web-app http://xmlns.oracle.com/weblogic/weblogic-web-app/1.3/weblogic-web-app.xsd">
<wls:weblogic-version>10.3.6</wls:weblogic-version>
<wls:context-root>/logs</wls:context-root>
<container-descriptor>
<index-directory-enabled>true</index-directory-enabled>
</container-descriptor>
<virtual-directory-mapping>
     <local-path>/opt/oracle/logs</local-path> (as per your path)
     <url-pattern>/logs/*</url-pattern>
     <url-pattern>*.log</url-pattern>
</virtual-directory-mapping>
</wls:weblogic-web-app>

Typing in url for my company website sends it to https index page in Firefox, but not IE or Chrome, and the behavoir is not wanted

After upgrading Firefox to version 14.0.1 i noticed when i typed in my company's website address that firefox went to the https:// version of the site when it never did that before.
Example, if you type in amazon.com in the URL bar, you briefly see that firefox turns the url to https://www.amazon.com before being auto directed to the normal www.amazon.com site.
My website did not have a secure index page and people were getting a server generated message until I found this issue out.
Is there a setting in Firefox to prevent the URL bar from selecting a secure connection first? This behavior does not occur in the most recent versions of I.E. or Chrome browsers on a desktop.
Any help would be greatly apprecaited

I've now been forced to tell my users NOT to use FF because of it's BUG.

Muse created index page not available on BC

I'm creating a website on Muse and have published it as a temporary file to BC. All pages, files, images, etc. are there except for my index page! I have published and re-published multiple times and still can't find it on my page list. Another strange thing is there are no site management features, (i.e., modules, templates, etc) to use on my admin panel. I would really appreciate any help for the community.
Thank you!

I'm not sure why you would think I don't have access to that. I'm an Adobe Cloud member and as such I can process five websites through BC. Anyway, I've already used the BC admin panel for a couple of sites I was fooling around with in order to get the hang of things. The other two, as the one I'm writing about, were also created in Muse and published as temporary sites on BC. This is the site address: http://sassanoassociates.businesscatalyst.com/
Here is the admin panel link: http://sassanoassociates.businesscatalyst.com/AdminConsoleXT/#dashboard
I intend on publishing the site through BC as I have a right to do.
As for my questions, there are three issues now with this one site.
1. The index (home) page is not publishing from Muse to BC - the others are.
2. There is no way to access the site management elements such as 'content holders' and 'module templates'.
3. Having problem with the 'Services' page. It was working ok until I added some html blocks (in Muse).
I'm very frustrated as I have attempted to find answers to these problems to no avail. I realize that I am probably not doing something or should have done something in order to make this work, however, I'm not new at designing sites and it's very difficult when working with a new platform to not be able to find answers.
I have committed to publishing this site within a week for my client. I would really appreciate some guidence with this situation as quickly as possible.
I'm pasting a copy of one of the other sites which I created exactly the same way and has all the management elements and features right there. I need my admin panel for the site in question to look like that!!
My account email is [email protected]
Thanks.

Having trouble with blank "index" page

I've published my site to a folder and transfered it succefully to my webhost. The only problem is that it shows up blank. I think because the index.html is blank when I open it on my harddrive to see the contents. I don't know html well enough to input the correct code to redirect from the webaddress people type in to the aboutme page I want them to see first.
I thought the program iWeb would write the index for me.
Any thoughts/suggestions will be greatly appreciated!

I am having the same issue. Published to folder and then to my yahoo hosting and the index page does not instantly redirect to the home page as expected?
On a mac it works just fine but PC browser shows blank page. Want this to be universal web access of course. Any help would be appreciated. Oh and if you wonder through the site there is nudity so be warned.
http://garryirvine.com = fine on mac not on PC browser(blank)
http://garryirvine.com/index.html worls on both. (redirects to home page from iweb project as expected [same for http://garryirvine.com/Home.html)
The index page for me is not blank on my server it has the following(without "'s):
"<?xml version="1.0" encoding="UTF-8"?><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><html xmlns="http://www.w3.org/1999/xhtml"><head><title></title><meta http-equiv="refresh" content="0;url= Home.html" /></head><body></body></html>"

Error in "URL of PI index page"

Hi Experts,
We are having an error in accessing the URL PI index page.
The Error is: Service cannot be reached.
HTTP 404 - Not found
I have checked the authorizations evrything is fine.
there is a note in the page:
The termination occurred in system PID with error code 404 and for the reason Not found.
The selected virtual host was 0 .
Thanks
Sunil

hi sunil,
for clearing the sld issue u need to create the RFC
Create RFC destination (TCP/IP) LCRSAPRFC and SAPSLDAPI for the SLD connection.
1.RFC Destination: LCRSAPRFC
    2.Connection Type: T
    3.Description: <your description>
    4.Choose ENTER.
    5.Choose the Technical settings tab page and do the following:
    6.In the Program ID field under Registered Server Program, enter LCRSAPRFC
    7.This program ID must correspond to a program ID specified in the RFC engine settings of the SAP J2EE Engine on the Integration Server host.
2. Maintaining the SAP J2EE Connection Parameters for LCRSAPRFC and SAPSLDAPI in SAP J2EE engine
1. Goto J2EE Engine
2. Choose Cluster --> Server --> Services. JCo RFC provider
3. Under RFC destination specify the following:
     Program ID: LCRSAPRFC
     Gateway Host: <Integration Server host>
     Gateway Service: <Integration Server gateway service>
     Number of process: 3
4. Under Repository specify the following:
Application Server: <Integration Server host>
5. Choose Set.
3. Maintain SLD access details in Transaction SLDAPICUST
and check this RFC are working fine r not... this are jco rfc..
this will create the connection for sld..
and after that maintian proper URL in sld...
ur problem will resilve... post if nay issue...
Regards
Vijay
Edited by: vijay Kumar on Jul 8, 2009 9:08 PM

Help with .swf Load on Index Page

Hello,
My website has a flash component on the index page.
I would like to ask for some help regarding the initial load of the .swf file.
What is happening is when one first sees the homepage, the area where the .sfw file is located is just a large white blank area until the flash become active.
Is there a way to have an image from the start, then load the larger flash animation so the white blank spot does not appear?
I ask my html coders if this could be done through html with an image say in the background and was told it is not possible.
Here is the site - www.metroplexmultimedia.com
Thanks for your help!

A follow-up on the same issue.
I am still having some issues with an swf file on the index page. Any more help would be appreciated.
What I would like is two-fold:
1) The viewer to see the first screen of the .swf as soon as possible
2) The four screens in the .swf to scroll to the next screen automatically every 5 seconds or so. (right now they only change when you hover over a button)
Is it is possible to program the swf file to auto scroll through the four slides, retain the button functionality and keep the Flash timeline short?
Maybe CSS might be a better appraoch for this functionality?
If I could ask, what do you think?
Is it possible to do this in Flash or is CSS really the only way?
Thanks,

Curious behavior of the index page

I use iWeb to maintain a site composed of an index page and many other pages. Whenever I make a change to any of the other pages and republish, I have to go back and republish the index page by itself, otherwise it will not load on any browser. This no big deal, as long as this continues to work, but I worry that something worst may happen, like never reload.!
Has someone run into this small issue and perhaps has a suggestion to resolve it? Thanks.

I also did this for my webhosting provider, not knowing I could keep it to Welcome. I should've thought of coming here, but I was assuming my errors were because it was Index, not index, so I went in with a text editor and changed all instances of Index with find and replace (names of the programs were changed to reflect it as well). Then I came here, so I edited the Index to Welcome in the iWeb interface, then saved it to the same folder after changing the old folder names to Welcome for an overwrite. It put the new stuff in a new folder of the same name in the website folder. Im using classicFTP. I hadn't checked to see that the folder had been placed inside the old folder, and saw it after I started uploading, when it was too late. So, I uploaded again, this time the inner folder only. My website hasn't changed. Sorry, I know just enough about script to be dangerous to my programs. Can anyone give me a gentle nudge or something in the right direction? I also tried using the question mark but it just gave me a page not found error.

301 redirects and iWeb index page

Our site has grown and we will be changing our domain name and hosting co. (We are keeping the old domain active for a while at MME before we change domain name and hosting) I will need to redirect traffic for a while so as not to lose those who have just bookmarked us. Will just redirecting on the index page that iWeb creates (post publish) do that without creating a mess of our page rankings at Google? Currently we are in the top 15 responses for our search terms. Or should i create some other type of redirect? 301? (via cname or htaccess) will that ding me at google? Thanks- try to keep it as simple as possible - I don't code - I experiment and Apple has made it easy.
jy

What I would do is purchase the hosting and see if you can have more than one add-on domain. Most web hosts let you do this on one account so it doesn't cost you any more money. You are doing this because you will need a .htaccess file to set up your 301 redirects properly. This is what you should do;
1) Register your new domain and publish your site to it.
2) Create a webmaster tools account for BOTH your old and new domain name.
3) Create a 301 redirect for each individual page to the new corresponding page on your new domain. This can be done with a few lines in your .htaccess file. The file should be in your root folder of your OLD domain. Put this on your .htaccess file (NOTE: This assumes you will have the exact same website structure on the new domain);
RewriteEngine ON
RewriteRule ^(.*)$ http://mynewdomain.com/$1 \[R=301,L\]
OPTIONAL: Use Google's canonical tag on each one of your pages to avoid any issues with duplicate content. Link the old page to it's new corresponding page. This is optional but recommended if you can;
<link rel="canonical" href="http://www.newdomain.com/newpage.html" />
4) Login to your Webmaster Tools account and select your OLD domain. Then select 'Site Configuration' and then 'change of address'. Follow the steps provided (which are basically what I told you above). Step 4 in there is the important one.
5) Submit a sitemap for your new website. This will make sure you know when Google has indexed your new website.
6) Important: Even though you have done everything properly there is a chance your rankings will change. To help prevent this, update as many third party links as you can to your new site. This won't be possible for all links since you won't have control over them but you should try contacting the website owners who have linked to you to update their links. You should also try getting new links to your new domain.
You can find all the sites you have linked to you by logging into your webmaster tools account and clicking your OLD domain. Then go to 'Your site on the web' and then to 'Links to your site'.
Nothing will be instant here, it will take a few days for everything to update but the above is the way Google recommends you do it.
HTH

Why does google chrome display my website's index page as a blue pg

why does google chrome display my website's index page as a blue pg

If you still got a issue, report it on this website. With the steps you follow + screenshot.
Few mounth ago I have to this problem with my accompagnatrici website
Go here and this page help you!
http://code.google.com/p/chromium/issues/list
Cheers

Anchors on index page in Muse 2014 freeze scrolling once clicked.

Hi everyone,
On my index page I have two anchor points with arrows that link to those anchors. Once clicked, they take me to the right spot (and smoothly), but once the page has scrolled to the anchor point, I am no longer able to scroll up or down. I do not encounter this problem on other pages of my site.
My index page: http://www.mdusault.com/
Try clicking on the red arrow. It takes you down nicely, but then doesn't allow you to scroll anymore.
On another page (not index page): Fading Lives
Click on "More Info", it takes you down and still allows you to scroll afterwards.
Any help? Is there a way to fix this issue?
Thanks for your help,
M

Replied here :
Muse CC 2014 Slideshow Horizontal Scrolling Thumbnails (Possible?)

Rediect particular URLs to index page

Hi,
From Apache1.3, I have to redirect all the URLs coming from port http://mydomain.com:9001/servlet/* to a index page (index.html).
I tried giving "Redirect" directive under mod_alias
Redirect /servlet http://mydomain.com:9001/index.html
but it is looking for http://mydomain.com:9001/index.html/* and is not redirecting it to the file. How can I do this.

Allie,
Can you tell me how you figured out how to have one index page link to a 2nd index page like the california example you described?
I am trying to do exactly that but layout is not happening the way I would like so i think I am doing something wrong
Thanks
Patrick

How to remove the "Index Page" option from the Router in Network Magic Pro 5.5.9195

I find it ironic and I can click on my router in the Map view of network magic, and the last option is "Index Page". This immediately loads my router setup in a browser window. It completely bypasses the router login and password. I do not want anyone to be able to start my PC, open Network Magic, and click this option and have access to my router. This is stupid. How do you turn this option off, remove it, or hide it?
Yes, I know, I could put a password on my PC, but I share it, with other family members, and at this time I don't have user accounts setup for them.
I am looking for a solution in Network Magic, not my OS.
Thanks,
Brian

Anything you do without submitting to form has to be done on the client side (ususally by JavaScript) using data which has been send already from the server.
With JavaScript you can do quite a bit. You can download tables which don't necessarilly appear on the screen, loading them into JavaScript arrays by dynamically generating javascript. Then you can pick up events like drop-box selection and use these tables to chose what you do next (e.g. preloading other fields, setting drop box content etc.).
Or, you can cause forms to be submitted when actions like a selection happen without the user clicking a button. It's generally a matter of how much data you'd need to transmit.
Another posibility is to use a Java applet, which can generate requests to the server and handle the results as it chooses. That are a number of problems with that but occasionally it's the best solution.
What you can't do is to handle user input inside a JSP. The JSP has come and gone before the user even gets to see your form.

Not able to get Out-of-the-Box Examples Index Page for running the jsp examples

Hi
I am a new person using weblogic first time I installed the weblogic 7.0 beta
version on my machine.I am trying to start the weblogic server console so that
I can configure web applications examples on my machine.
I am getting following error and not able to view Out-of-the-Box Examples Index
Page
error:
<Apr 5, 2002 12:11:39 PM IST> <Error> <SystemDataStore> <null> <Unable to listen
on Port 7003: Address in use: JVM_Bind>
Please help me to find the reason to have this problem
Thank You in advance
Vikas

Hi.
Please post all WLS 7.0 beta questions to the beta newsgroups -
weblogic.developer.interest.70beta.*.
Thanks,
Michael
Vikas wrote:
Hi
I am a new person using weblogic first time I installed the weblogic 7.0 beta
version on my machine.I am trying to start the weblogic server console so that
I can configure web applications examples on my machine.
I am getting following error and not able to view Out-of-the-Box Examples Index
Page
error:
<Apr 5, 2002 12:11:39 PM IST> <Error> <SystemDataStore> <null> <Unable to listen
on Port 7003: Address in use: JVM_Bind>
Please help me to find the reason to have this problem
Thank You in advance
Vikas--
Michael Young
Developer Relations Engineer
BEA Support

403 Forbidden Error on directory but not on index page.

I can't seem to find the source of the 403 Forbidden error. Index page works as expected but accessing the owncoud directory throws this error. Configs below.
httpd.conf
condensed:
ServerRoot "/etc/httpd"
Listen 80
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_core_module modules/mod_authz_core.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule mime_module modules/mod_mime.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule env_module modules/mod_env.so
LoadModule headers_module modules/mod_headers.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
LoadModule unixd_module modules/mod_unixd.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule php5_module modules/libphp5.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
<IfModule unixd_module>
User http
Group http
</IfModule>
ServerAdmin [email protected]
<Directory />
AllowOverride none
Require all denied
</Directory>
DocumentRoot "/srv/http"
<Directory "/srv/http">
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
<Directory "/srv/http/owncloud">
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
<Files ".ht*">
Require all denied
</Files>
ErrorLog "/var/log/httpd/error_log"
LogLevel warn
<IfModule log_config_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
CustomLog "/var/log/httpd/access_log" common
</IfModule>
<IfModule alias_module>
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
</IfModule>
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
TypesConfig conf/mime.types
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
</IfModule>
Include conf/extra/httpd-mpm.conf
Include conf/extra/httpd-multilang-errordoc.conf
Include conf/extra/httpd-autoindex.conf
Include conf/extra/httpd-languages.conf
Include conf/extra/httpd-userdir.conf
Include conf/extra/httpd-default.conf
Include conf/vhosts/itiest.com
Include conf/extra/php5_module.conf
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
Include conf/extra/httpd-ssl.conf
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
Include conf/extra/owncloud.conf
With Comments:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/etc/httpd"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
#LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule php5_module modules/libphp5.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
<Directory "/srv/http/owncloud">
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
## vhosts
Include conf/vhosts/itiest.com
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Include conf/extra/owncloud.conf
##open_basedir=/srv/http/:/home/:/tmp/:/usr/share/pear/:/path/to/documentroot
$ ls -al /srv/http/
total 16876
drwxr-xr-x 4 root http 4096 Mar 6 17:51 .
drwxr-xr-x 4 root root 4096 Feb 15 13:57 ..
-rwxrwxrwx 1 root http 295 Mar 6 11:51 index.html
drwxrwxr-x 11 http http 4096 Feb 6 18:33 owncloud
-rw-r--r-- 1 root root 17200380 Feb 6 18:41 owncloud-8.0.0.tar.bz2
-rw-r--r-- 1 root root 52966 Mar 6 11:49 smallpizza.jpg
-rw-r--r-- 1 root root 20 Mar 6 16:24 test.php
# groups http
wheel http
Last edited by johan1391 (2015-03-07 04:11:12)

/var/log/httpd/owncloud-error.log
192.168.1.1 - - [06/Mar/2015:17:52:02 -0800] "GET /owncloud/ HTTP/1.1" 403 1002
192.168.1.1 - - [06/Mar/2015:17:52:51 -0800] "GET /owncloud/ HTTP/1.1" 403 1002
192.168.1.1 - - [06/Mar/2015:17:52:53 -0800] "GET /owncloud/ HTTP/1.1" 403 1002
$ ls -al /usr/share/webapps/
drwxr-xr-x 5 root root 4096 Mar 6 17:12 .
drwxr-xr-x 165 root root 4096 Mar 6 21:22 ..
drwxr-xr-x 4 http http 4096 Mar 6 17:49 owncloud
drwxr-xr-x 10 root root 4096 Mar 5 02:11 phpMyAdmin
drwxr-xr-x 6 root root 4096 Sep 18 09:08 php-xcache
Also keep in mind that I've installed owncloud using the source downloaded from the website. I previously installed using the pacman, but wanted to configure it to be under a sub directory and not as my web root.
Last edited by johan1391 (2015-03-07 19:03:19)

Coldfusion Index Page issue

Similar Messages

Maybe you are looking for