Coldfusion plugin for Apache 2.2
Is there a Coldfusion version 4.5 or version 4 plugin for
Apache webserver 2.2 available? If so, how can I get it? Any help
is appreciated. Thanks
We're having the same problem. Is there a plugin that works with apache 2.0.45?
Thanks,
Marie
<[email protected]> wrote:
Here, we have apache 2.0.44 which works fine with the plugin, but when
we
upgrade
apache from 2.0.44 to 2.0.45 we get the following error
httpd: module "mod_weblogic.c" is not compatible with this version of
Apache
(found
20020612, need 20020903).
Please contact the vendor for the correct version.
Could anybody tell me please where to find a plugin suitable for the
new
apache version,
or in the other hand, could you tell me how to workaround this problem.
Thanks.
Luis Esteban
lesteban at aquanima.com
Similar Messages
-
Weblogic plugin for Apache 2.2
Where should I download the weblogic plugin for Apache 2.2?
I'm running WL 10.3 on windows xp.
Please provide the link .
Thanks,
sriposHi
On this link, click Accept license and go all the way to bottom and click on All Versions link named next to "Oracle WebLogic Server Web Server Plugins 1.1"
http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
That click should open this below link. Accept the license and Download the zip file. Then follow the instructions.
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-plugins-096117.html
Thanks
Ravi Jegga -
Is there a weblogic 11gr1(10.3.6) plugin for apache 2.4 on windows
I need to find out what version of Web Server Proxy Plugin is the correct one to work with WebLogic Server 11gr1 (10.3.6) and Apache webserver 2.4.
WebLogic Web Server Plug-In 12c indicates that it is backward compatible with WebLogic Web Server Plugins 11gR1 but supports only 64-bit Web Servers. Please refer to Oracle Weblogic WebServer Plug-In 12.1.3 documentation for more information.
However when I goto the documentation I do not find any information.
Any help would be appreciated!Hi,
Can you check your web-server if your web-server is 64 bit then you can go ahead and use the 12c plugins .
As it is always good to be on the latest plugins .
If its a 32 bit then you have to stay on 11g plugins for the Webservers.
Certification matrix for 10.3.6
http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
Hope it helps -
Urgent: Plugin for Apache on SuSE Linux
I am trying to install weblogic Plug-In for Apache 1.3.22 on SuSE linux. I installed
apache, got the mod_wl.so from weblogic6.1/lib/linux folder. No problems in installing.
It added
'LoadModule weblogic_module libexec/mod_wl.so'
I noticed that it did not add
'AddModule mod_weblogic.c'.
Anyway I tried running ./apachectl configtest and I get follwing error message:
Cannot load /usr/local/apache/libexec/mod_wl.so into server: /usr/local/apache/libexec/mod_wl.so:
ELF file data encoding not big-endian
I added the line 'AddModule mod_weblogic.c', but I still get the same error. What
is going on. Please help immediately. This is extremely urgent.Hi
You can directly update configuration files, and at least restart the listnener.
%ORACLE_HOME%\NETWORK\ADMIN\tnsnames.ora
(HOST = 1st_host_Physical_name)
%ORACLE_HOME%\NETWORK\ADMIN\sqlnet.ora
(HOST = 1st_host_Physical_name)
Also make sure that if instance parameter "local_listener" is set it is using physical hostname.
Regards -
Intermittent problem with weblogic plugin for Apache
Env: hpux11, wls 4.5.2 w/sp1, apache 1.3.12.1
I am using Apache as the proxy for servlets. Apache serves all static content html/gifs.
The servlet request is forwarded to weblogic, and the servlet forwards the request to a jsp which responds with html output. Using IE 5, sometimes the images and html show up properly, other times the html code/tags is displayed. Using Netscape, the page does not display at all when the error occurs, otherwise it displays fine.
The problem occurs when refreshing the same page.
The errant display is HTML code/tags like:
<AREA SHAPE="RECT" COORDS="4,4,82,86"
Here are the httpd.conf settings for the wls plugin.
<Files *.jsp
SetHandler weblogic-handler
</Files
<Files *.ssi
SetHandler weblogic-handler
</Files
<Location /servletDispatcher
SetHandler weblogic-handler
</Location
WebLogicHost 192.168.12.63
WebLogicPort 8173
MatchExpression *.jsp
Debug ON
DebugConfigInfo ON
HungServerRecoverSecs 300
CookieName mycookie
In the debug log for wls plugin, the following failure message is logged to /tmp/wlproxy.log:
"operation READ failed on fd 8: revents=0x000000c0"
It looks like a socket error on the plugin. Has anyone seen this error or know what causes it?
The log message (in /tmp/wlproxy.log) for the entire request follows:
========New Request: [GET /tangomain?bid=20654&rq=rates HTTP/1.1] =========
Thu Nov 9 13:59:11 2000 Init: availcookie=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhmqdw3|-839933
8697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 In cookie2Servers, const c is 'sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhm
qdw3|-8399338697591569903/-1062728652/5/8173/8173/7002/7002/-1'Thu Nov 9 13:59:11 2000 In parseJVMID...'-8399338697591569903/-10627
28652/5/8173/8173/7002/7002/-1'!!Thu Nov 9 13:59:11 2000 Init: Preferred[0] = 192.168.12.52:8173
Thu Nov 9 13:59:11 2000 Init: Preferred[1] = :0
Thu Nov 9 13:59:11 2000 The request string is '/tangomain?bid=20654&rq=rates'
Thu Nov 9 13:59:11 2000 After trimming path: '/tangomain?bid=20654&rq=rates'
Thu Nov 9 13:59:11 2000 trying connect to PRIMARY '192.168.12.63'/8173
Thu Nov 9 13:59:11 2000 Host 192.168.12.63/8173 not found in the server list
Thu Nov 9 13:59:11 2000 Adding header [Accept]=[application/msword, application/vnd.ms-excel, application/vnd.ms-powerpoint, image/
gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*]
Thu Nov 9 13:59:11 2000 Adding header [Accept-Encoding]=[gzip, deflate]
Thu Nov 9 13:59:11 2000 Adding header [Accept-Language]=[en-us]
Thu Nov 9 13:59:11 2000 Adding header [Connection]=[Keep-Alive]
Thu Nov 9 13:59:11 2000 Adding header [Cookie]=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhmqdw3|-8
399338697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 Adding header [Host]=[mortgage.mysite.com:8443]
Thu Nov 9 13:59:11 2000 Adding header [Referer]=[https://mortgage.mysite.com:8443/tangomain?bid=20654&rq=main]
Thu Nov 9 13:59:11 2000 Adding header [User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.0; Windows NT)]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept]=[application/msword, application/vnd.ms-excel, application/vnd.ms-powerpoint
, image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept-Encoding]=[gzip, deflate]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept-Language]=[en-us]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Cookie]=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvh
mqdw3|-8399338697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Host]=[mortgage.homeside.com:8443]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Referer]=[https://mortgage.mysite.com:8443/tangomain?bid=20654&rq=main]
Thu Nov 9 13:59:11 2000 Sending header to WLS [User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.0; Windows NT)]
Thu Nov 9 13:59:11 2000 Sending header to WLS [WL-Proxy-SSL]=[true]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Proxy-Client-IP]=[10.155.217.195]
Thu Nov 9 13:59:11 2000 Header received from WLS : [HTTP/1.0 200 OK] = []
Thu Nov 9 13:59:11 2000 Header received from WLS : [Server] = [WebLogic 4.5.2 Service Pack 1 08/31/2000 09:51:21 #81452]
Thu Nov 9 13:59:11 2000 Header received from WLS : [Content-Type] = [text/html]
Thu Nov 9 13:59:11 2000 Responses from WLS:
Thu Nov 9 13:59:11 2000 Headers from WLS [1] ([Server],[WebLogic 4.5.2 Service Pack 1 08/31/2000 09:51:21 #81452])
Thu Nov 9 13:59:11 2000 Headers from WLS [2] ([Content-Type],[text/html])
Thu Nov 9 13:59:11 2000 operation READ failed on fd 8: revents=0x000000c0
Thanks in advance for any assistance.
AaronEnv: hpux11, wls 4.5.2 w/sp1, apache 1.3.12.1
I am using Apache as the proxy for servlets. Apache serves all static content html/gifs.
The servlet request is forwarded to weblogic, and the servlet forwards the request to a jsp which responds with html output. Using IE 5, sometimes the images and html show up properly, other times the html code/tags is displayed. Using Netscape, the page does not display at all when the error occurs, otherwise it displays fine.
The problem occurs when refreshing the same page.
The errant display is HTML code/tags like:
<AREA SHAPE="RECT" COORDS="4,4,82,86"
Here are the httpd.conf settings for the wls plugin.
<Files *.jsp
SetHandler weblogic-handler
</Files
<Files *.ssi
SetHandler weblogic-handler
</Files
<Location /servletDispatcher
SetHandler weblogic-handler
</Location
WebLogicHost 192.168.12.63
WebLogicPort 8173
MatchExpression *.jsp
Debug ON
DebugConfigInfo ON
HungServerRecoverSecs 300
CookieName mycookie
In the debug log for wls plugin, the following failure message is logged to /tmp/wlproxy.log:
"operation READ failed on fd 8: revents=0x000000c0"
It looks like a socket error on the plugin. Has anyone seen this error or know what causes it?
The log message (in /tmp/wlproxy.log) for the entire request follows:
========New Request: [GET /tangomain?bid=20654&rq=rates HTTP/1.1] =========
Thu Nov 9 13:59:11 2000 Init: availcookie=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhmqdw3|-839933
8697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 In cookie2Servers, const c is 'sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhm
qdw3|-8399338697591569903/-1062728652/5/8173/8173/7002/7002/-1'Thu Nov 9 13:59:11 2000 In parseJVMID...'-8399338697591569903/-10627
28652/5/8173/8173/7002/7002/-1'!!Thu Nov 9 13:59:11 2000 Init: Preferred[0] = 192.168.12.52:8173
Thu Nov 9 13:59:11 2000 Init: Preferred[1] = :0
Thu Nov 9 13:59:11 2000 The request string is '/tangomain?bid=20654&rq=rates'
Thu Nov 9 13:59:11 2000 After trimming path: '/tangomain?bid=20654&rq=rates'
Thu Nov 9 13:59:11 2000 trying connect to PRIMARY '192.168.12.63'/8173
Thu Nov 9 13:59:11 2000 Host 192.168.12.63/8173 not found in the server list
Thu Nov 9 13:59:11 2000 Adding header [Accept]=[application/msword, application/vnd.ms-excel, application/vnd.ms-powerpoint, image/
gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*]
Thu Nov 9 13:59:11 2000 Adding header [Accept-Encoding]=[gzip, deflate]
Thu Nov 9 13:59:11 2000 Adding header [Accept-Language]=[en-us]
Thu Nov 9 13:59:11 2000 Adding header [Connection]=[Keep-Alive]
Thu Nov 9 13:59:11 2000 Adding header [Cookie]=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvhmqdw3|-8
399338697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 Adding header [Host]=[mortgage.mysite.com:8443]
Thu Nov 9 13:59:11 2000 Adding header [Referer]=[https://mortgage.mysite.com:8443/tangomain?bid=20654&rq=main]
Thu Nov 9 13:59:11 2000 Adding header [User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.0; Windows NT)]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept]=[application/msword, application/vnd.ms-excel, application/vnd.ms-powerpoint
, image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept-Encoding]=[gzip, deflate]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Accept-Language]=[en-us]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Cookie]=[sid=OgrzAW0CpixHnM5hf25UQv12qubTNcddw9FBmMGZ3PXY0IP1qQ3P0d1KcLRhMyb4LsJnXvh
mqdw3|-8399338697591569903/-1062728652/5/8173/8173/7002/7002/-1]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Host]=[mortgage.homeside.com:8443]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Referer]=[https://mortgage.mysite.com:8443/tangomain?bid=20654&rq=main]
Thu Nov 9 13:59:11 2000 Sending header to WLS [User-Agent]=[Mozilla/4.0 (compatible; MSIE 5.0; Windows NT)]
Thu Nov 9 13:59:11 2000 Sending header to WLS [WL-Proxy-SSL]=[true]
Thu Nov 9 13:59:11 2000 Sending header to WLS [Proxy-Client-IP]=[10.155.217.195]
Thu Nov 9 13:59:11 2000 Header received from WLS : [HTTP/1.0 200 OK] = []
Thu Nov 9 13:59:11 2000 Header received from WLS : [Server] = [WebLogic 4.5.2 Service Pack 1 08/31/2000 09:51:21 #81452]
Thu Nov 9 13:59:11 2000 Header received from WLS : [Content-Type] = [text/html]
Thu Nov 9 13:59:11 2000 Responses from WLS:
Thu Nov 9 13:59:11 2000 Headers from WLS [1] ([Server],[WebLogic 4.5.2 Service Pack 1 08/31/2000 09:51:21 #81452])
Thu Nov 9 13:59:11 2000 Headers from WLS [2] ([Content-Type],[text/html])
Thu Nov 9 13:59:11 2000 operation READ failed on fd 8: revents=0x000000c0
Thanks in advance for any assistance.
Aaron -
Weblogic plugin for Apache 2 problem
Hi guys,
Is it possible that the plugin corrupt or append leading zeros to a text
field on the form data of the application from example fund transfer
amount USD 20 then suddenly when it reaches weblogic is USD 200.
Regards,
KennethHi
On this link, click Accept license and go all the way to bottom and click on All Versions link named next to "Oracle WebLogic Server Web Server Plugins 1.1"
http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
That click should open this below link. Accept the license and Download the zip file. Then follow the instructions.
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-plugins-096117.html
Thanks
Ravi Jegga -
Setting up the Apache HTTP Plugin for several BEA Servers
Hey together,
i would like to setup the apache http plugin for several bea-servers.
I am running apache 1.x on my hp-ux system. There are 2 bea-server-domains on this box and both should be proxied by the plugin simultaneously.
As far as i know it isn't possible to run 2 or more instances of the apache webserver. I heard of virtualhosts, maybe i should try this one out.
Somebody knows how to deal with this problem or does any1 know if virtualhosts could cope with my needs?
Thanks in advanceOk here i am again and i'm stuck. Here my wishes again:
there are 2 weblogic-instances (domains) running on a machine xxx, instance A listening on port 8041, instance B listening on port 8051. I want to configure apache virtualhosts in combination with weblogic plugins, so that request with /ld will be sent to instance A while requests with /ldd will be sent to instance B. Both are no clusters. Therefore i tried it with the following configuration (httpd.conf):
<VirtualHost xxx:8080>
DocumentRoot "/opt/hpws/apache/htdocs"
ServerName xxx:8080
<IfModule mod_weblogic.c>
WebLogicHost xxx
WebLogicPort 8041
#MatchExpression *
#PathPrepend=/test2
</IfModule>
<Location /ld>
SetHandler weblogic-handler
PathTrim /ld
</Location>
</VirtualHost>
# VirtualHost2 = xxx:8090
<VirtualHost xxx:8090>
DocumentRoot "/opt/hpws/apache/htdocs"
ServerName xxx:8090
<IfModule mod_weblogic.c>
WebLogicHost xxx
WebLogicPort 8051
#MatchExpression *
#PathPrepend=/test2
</IfModule>
<Location /ldd>
SetHandler weblogic-handler
PathTrim /ldd
</Location>
Doesnt really work. Can some1 help please?
Thanks -
Setup issues: Apache plugin for Weblogic
Hi,
I've spent couple of days without success trying to configure apache plugin for weblogic. I've configured in accordance with bea documentation and it works fine in windows environment but fails in Solaris 9.
Plugin log file says it's processed the request successfully but I see error message in browser saying it can't find the jsp file. It works fine if I access the weblogic box directly without going through apache.
I'm using Weblogic 8.1 SP2, single server.
Please find below the messages appear in browser, plugin logs, and apache version.
Thanks in advance for your help.
======================Browser Error Message================
JSP Processing Error
HTTP Error Code: 404
Error Message:JSPG0036E: Failed to find resource /AppConsole/common/login.jsp
Root Cause:java.io.FileNotFoundException: JSPG0036E: Failed to find resource /AppConsole/common/login.jsp at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.findWrapper(JSPExtensionProcessor.java:246) at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:228) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2841) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220) at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934) at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021) at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1332)
======================Browser Error Message End================
==========Apache version============
Please find apache version and plugin logs below:
# ./apachectl -v
Server version: IBM_HTTP_Server/6.0 Apache/2.0.47
Server built: Nov 4 2004 09:58:18
==========Apache version End============
=================Plugin Logs================
================New Request: [GET /AppConsole/ HTTP/1.1] =================
Mon Jun 12 08:20:14 2006 INFO: SSL is not configured
Mon Jun 12 08:20:14 2006 After trimming path: '/AppConsole/'
Mon Jun 12 08:20:14 2006 The final request string is '/AppConsole/'
Mon Jun 12 08:20:14 2006 SEARCHING id=[83.231.147.129:27110] from current ID=[83.231.147.129:27110]
Mon Jun 12 08:20:14 2006 @@@FOUND...id=[83.231.147.129:27110], server_name=[83.231.147.65], server_port=[80]
Mon Jun 12 08:20:14 2006 attempt #0 out of a max of 5
Mon Jun 12 08:20:14 2006 general list: trying connect to '83.231.147.129'/27110/27110 at line 1981 for '/AppConsole/'
Mon Jun 12 08:20:14 2006 INFO: New NON-SSL URL
Mon Jun 12 08:20:14 2006 general list: trying connect to '83.231.147.129'/27110
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Via]=[1.0 NMUKPER]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[User-Agent]=[Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; NissanEurope; .NET CLR 1.0.3705)]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Accept]=[image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Accept-Language]=[en-gb,fr;q=0.8,es;q=0.6,nl;q=0.4,ja;q=0.2]
Mon Jun 12 08:20:14 2006 Hdrs from clnt:[Host]=[83.231.147.65]
Mon Jun 12 08:20:14 2006 URL::sendHeaders(): meth='GET' file='/AppConsole/' protocol='HTTP/1.1'
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Via]=[1.0 NMUKPER]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[User-Agent]=[Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; NissanEurope; .NET CLR 1.0.3705)]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Accept]=[image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Accept-Language]=[en-gb,fr;q=0.8,es;q=0.6,nl;q=0.4,ja;q=0.2]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Host]=[83.231.147.65]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Connection]=[Keep-Alive]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[WL-Proxy-SSL]=[false]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[WL-Proxy-Client-IP]=[62.172.128.4]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[Proxy-Client-IP]=[62.172.128.4]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-Forwarded-For]=[62.172.128.4]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-Request-ClusterInfo]=[true]
Mon Jun 12 08:20:14 2006 Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[30]
Mon Jun 12 08:20:14 2006 INFO: sysSend 639
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Date]=[Mon, 12 Jun 2006 07:20:14 GMT]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Location]=[http://83.231.147.65/AppConsole/common/login.jsp;jsessionid=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Server]=[WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 with CR174792 CR173632 CR135189 CR134122 CR133071 CR132575 CR129505 CR129371 CR129122 CR128888 CR124746 CR124239 CR107373]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Content-Type]=[text/html]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Set-Cookie]=[JSESSIONID=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE; path=/]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[X-WebLogic-Cluster-Hash]=[mx4NFnJY0ypWiiF1G2lM080SToc]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[X-WebLogic-Cluster-List]=[-656182639!eus0000160.eu.verio.net!27110!-1]
Mon Jun 12 08:20:14 2006 Hdrs from WLS:[Transfer-Encoding]=[chunked]
Mon Jun 12 08:20:14 2006 parsed all headers OK
Mon Jun 12 08:20:14 2006 Hdrs to client:[Date]=[Mon, 12 Jun 2006 07:20:14 GMT]
Mon Jun 12 08:20:14 2006 Hdrs to client:[Location]=[http://83.231.147.65/AppConsole/common/login.jsp;jsessionid=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE]
Mon Jun 12 08:20:14 2006 Hdrs to client:[Server]=[WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 with CR174792 CR173632 CR135189 CR134122 CR133071 CR132575 CR129505 CR129371 CR129122 CR128888 CR124746 CR124239 CR107373]
Mon Jun 12 08:20:14 2006 Hdrs to client:[Set-Cookie]=[JSESSIONID=ENVulmFw71QICHDuP5nSB8kRPe2teTcbjdBtwkjwSY96UxrHEYXr!-656182639!NONE; path=/]
Mon Jun 12 08:20:14 2006 Hdrs to client:[X-WebLogic-Cluster-List]=[-656182639!eus0000160.eu.verio.net!27110!-1]
Mon Jun 12 08:20:14 2006 canRecycle: conn=1 status=302 isKA=1 clen=-1 isCTE=1
Mon Jun 12 08:20:14 2006 closeConnection in load_utils: deleting URL*
Mon Jun 12 08:20:14 2006 request [AppConsole/] processed sucessfully..................
=================Plugin Logs End================Yes it is IBM Http Server, but it works fine from Windows accessing the same weblogic server I'm trying to connect from Solaris.
I see 500 error in the apache access log file.
I've also tried with by setting "MaxRequestsPerChild" to 0 in the apache config file but no good.
Please find below httpd.conf file content.
==============httpd.conf===============
ServerName eus0000168.eu.verio.net
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/opt/IBMIHS" will be interpreted by the
# server as "/opt/IBMIHS/logs/foo.log".
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "/opt/IBMIHS"
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#LockFile logs/accept.lock
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 10
## Server-Pool Size Regulation (MPM specific)
# worker MPM
# ThreadLimit: maximum setting of ThreadsPerChild
# ServerLimit: maximum setting of StartServers
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule worker.c>
#StartServers 5
StartServers 1
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 1000
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
# Change this to "Listen 0.0.0.0:port" to restrict the server to
# IPv4.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
LoadModule auth_dbm_module modules/mod_auth_dbm.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule mime_module modules/mod_mime.so
#LoadModule dav_module modules/mod_dav.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
LoadModule cgid_module modules/mod_cgid.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule dir_module modules/mod_dir.so
LoadModule imap_module modules/mod_imap.so
LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule deflate_module modules/mod_deflate.so
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#LoadModule status_module modules/mod_status.so
<IfModule mod_status.c>
ExtendedStatus On
</IfModule>
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group #-1 on these systems!
User nobody
Group nobody
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
#ServerName new.host.name:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#DocumentRoot "/opt/IBMIHS/htdocs/en_US"
#DocumentRoot "/www/a"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/opt/IBMIHS/htdocs/en_US">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI Multiviews
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.
UserDir public_html
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit Indexes
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig conf/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
# EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error_log
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel debug
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog logs/access_log common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access_log combined
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Prod
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature Off
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
Alias /icons/ "/opt/IBMIHS/icons/"
<Directory "/opt/IBMIHS/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "/opt/IBMIHS/cgi-bin/"
<IfModule mod_cgid.c>
# Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
# for setting UNIX socket for communicating with cgid.
#Scriptsock logs/cgisock
</IfModule>
# "/opt/IBMIHS/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/opt/IBMIHS/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Directives controlling the display of server-generated directory listings.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
AddType application/x-tar .tgz
AddType image/x-icon .ico
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For files that include their own HTTP headers:
#AddHandler send-as-is asis
# For server-parsed imagemap files:
#AddHandler imap-file map
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# Putting this all together, we can internationalize error responses.
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
# Alias /error/include/ "/your/include/path/"
# which allows you to create your own set of files by starting with the
# /opt/IBMIHS/error/include/ files and copying them to /your/include/path/,
# even on a per-VirtualHost basis. The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
# The internationalized error documents require mod_alias, mod_include
# and mod_negotiation. To activate them, uncomment the following 30 lines.
# Alias /error/ "/opt/IBMIHS/error/"
# <Directory "/opt/IBMIHS/error">
# AllowOverride None
# Options IncludesNoExec
# AddOutputFilter Includes html
# AddHandler type-map var
# Order allow,deny
# Allow from all
# LanguagePriority en de es fr it nl sv
# ForceLanguagePriority Prefer Fallback
# </Directory>
# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
# ErrorDocument 410 /error/HTTP_GONE.html.var
# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
# ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash. This fixes a
# problem with Microsoft WebFolders which does not appropriately handle
# redirects for folders with DAV methods.
# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
# Change the ".example.com" to match your domain to enable.
#<Location /server-status>
# SetHandler server-status
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".example.com" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
#Enable the forward proxy server. Note: Do not use the ProxyRequests directive if
#all you require is reverse proxy.
#ProxyRequests On
#<Proxy *>
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Proxy>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
#ProxyVia On
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at
# <URL:http://httpd.apache.org/docs-2.0/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# Use name-based virtual hosting.
#NameVirtualHost *
NameVirtualHost 83.231.147.65:80
<VirtualHost 83.231.147.65:80>
ServerName eus0000168
DocumentRoot "/www/a/global/nissan-europe"
RewriteEngine on
RewriteLogLevel 0
RewriteOptions inherit
#--RAM----
LoadModule weblogic_module modules/mod_wl_20.so
Debug ALL
WLLogFile "/logs/apache2/wllog.log"
StatPath true
DebugConfigInfo On
KeepAliveEnabled ON
<IfModule mod_weblogic.c>
WebLogicHost 83.231.147.129
#WebLogicHost eus0000160
#WebLogicCluster eus0000160.eu.verio.net:27110,eus0000160.eu.verio.net:27001
WebLogicPort 27110
</IfModule>
DynamicServerList OFF
<Location /AppConsole>
SetHandler weblogic-handler
</Location>
<Location /console>
SetHandler weblogic-handler
</Location>
<Location /HTTPClnt>
SetHandler weblogic-handler
</Location>
<Location /iiop>
SetHandler weblogic-handler
</Location>
#------RAM------
Alias /data "/www/a/data"
Alias /at "/www/a/at"
Alias /ch "/www/a/ch"
Alias /ch_fr "/www/a/ch/ch_FR"
Alias /ch_de "/www/a/ch/ch_DE"
Alias /de "/www/a/de"
Alias /es "/www/a/es"
Alias /fr "/www/a/fr"
Alias /it "/www/a/it"
Alias /nl "/www/a/nl"
Alias /se "/www/a/se"
Alias /tr "/www/a/tr"
Alias /uk "/www/a/uk"
Alias /cz "/www/a/cz"
Alias /hu "/www/a/hu"
Alias /sk "/www/a/sk"
Alias /global "/www/a/global"
Alias /dk "/www/a/dk"
Alias /fi "/www/a/fi"
Alias /no "/www/a/no"
Alias /pl "/www/a/pl"
Alias /pt "/www/a/pt"
ErrorDocument 404 /error404.html
ErrorDocument 500 /error.html
</VirtualHost>
Include conf/virtual-hosts/
CoreDumpDirectory /logs/apache2
LoadModule was_ap20_module /opt/IBM/WebSphere/Plugins/bin/mod_was_ap20_http.so
WebSpherePluginConfig /opt/IBM/WebSphere/Plugins/config/webserver1/plugin-cfg.xml
LoadModule weblogic_module modules/mod_wl_20.so
Debug ALL
WLLogFile "/logs/apache2/wllog.log"
StatPath true
DebugConfigInfo ON
KeepAliveEnabled ON
<IfModule mod_weblogic.c>
WebLogicHost 83.231.147.129
WebLogicPort 27110
</IfModule>
CoreDumpDirectory /logs/apache2
D -
URL for apache plugin for linux with weblogic 6.1
Hi,
can anyone tell me, where i can find the apache plugin for linux weblogic 6.1
thanks in advance,
cheers chrisCould you give some detail for this issue? I have tried the plugin with IIS6 and it does works.
-
Netscape or Apache plugin for WebLogic
Hi,
The Netscape plugin for WebLogic is mentioned many time in on-line
documents for WebLogic servers. However, I can't find any information
with regard to how the plug-in is distributed, licensed. Could someone
please tell me if it is bundled in the server download? How do I install
this thing? Is there Apache plugin for Solaris platform?
Thank you,
Wayne
Wayne Wei-Zhong He, Ph.D.
Sr. Biomed Engineer, Emerging Technology
Incyte Pharmaceuticals Inc.
650-845-5784 (direct) / 650-621-8655 (fax)Hi, Michael,
Thanks for help. I found the documentation and installed the
libproxy.so. However, the server reported internal error when I tried to
use it. Do you have any idea what I did wrong?
The following were added to obj.conf :
Init fn="load-modules" funcs="wl-proxy,wl-init" \
shlib="/home/ns-home/plugins/weblogic/libproxy.so"
Init fn="wl-init"
<Object name="weblogic" ppath="*/weblogic/*">
Service fn=wl-proxy WebLogicHost=hercules.incyte.com \
WebLogicPort=7001 PathTrim="/weblogic"
</Object>
error log says:
[20/Apr/2000:17:56:06] info (18864): successful server startup
[20/Apr/2000:17:56:06] info (18864): Netscape-Enterprise/3.6 SP2
B99.113.0837
[20/Apr/2000:17:56:06] verbose (18864): dstats: Using slotbase = 0 start
= 0 end = 1024 last = 0 slots pid = 18864
[20/Apr/2000:17:56:28] config (18864): for host 10.49.2.229 trying to
GET /weblogic/index.html, func_exec reports: no handler function given
for directive
Thanks,
Wayne
Michael Girdley wrote:
>
That is the correct one. You should refer to be documentation on installing
our plug-ins.
Michael Girdley
WLS Product Manager
Wayne He <[email protected]> wrote in message
news:[email protected]...
Hi, Micheal,
Thank you very much. I found them. They are all *.dll files. I seems to
have the impression that BEA support both NT and solaris. Keep looking
I also found a file called libproxy.so in the weblogic/lib/solaris
directory. Is this the one I need? If so, what do I need to do to
install?
Thanks,
Wayne
Wayne Wei-Zhong He, Ph.D.
Sr. Biomed Engineer
Incyte Pharmaceuticals Inc.
650-845-5784 (direct) / 650-621-8655 (fax)
Michael Girdley wrote:
It is available in the Weblogic/bin directory in your distribution if I
remember correctly.
Michael Girdley
WLS Product Manager
Wayne He <[email protected]> wrote in message
news:[email protected]...
Hi,
The Netscape plugin for WebLogic is mentioned many time in on-line
documents for WebLogic servers. However, I can't find any information
with regard to how the plug-in is distributed, licensed. Could someone
please tell me if it is bundled in the server download? How do I
install
this thing? Is there Apache plugin for Solaris platform?
Thank you,
Wayne
Wayne Wei-Zhong He, Ph.D.
Sr. Biomed Engineer, Emerging Technology
Incyte Pharmaceuticals Inc.
650-845-5784 (direct) / 650-621-8655 (fax)
Wayne Wei-Zhong He, Ph.D.
Sr. Biomed Engineer, Incyte Genomics Inc.
650-845-5784 (direct) / 650-621-8655 (fax) -
Is there an apache plugin for 2.0.43 on windows
We are using apache 2.0.43 on our HP box with the WL 7 plugin. The lastest plugin
that we have for windows is for apache 2.0.39. Is there a newer plugin and/or
source available?I was loking for that too...
I found it at <BEA HOME>\weblogic700\server\bin
The old file is 532K and the one you want is 536k
HTH
--Geezer -
Apache plugin for Weblogic not forwarding entire X509 certificate chain
I really hope there's someone out there that can help with this. I've spent all week trying various things to make this work.
SUMMARY
It doesn't appear that the Weblogic plugin (mod_wl_20.so) for Apache (2.0.49) sends the entire X509 certificate chain sent from a client to Weblogic (9.2).
DESCRIPTION
We have Apache set up to accept client certificates over SSL. This authentication process is successful. When viewing the weblogic plugin log, I can see the headers that are being sent to weblogic:
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[Content-Type]=[text/xml; charset=utf-8]
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[Accept]=[application/soap+xml, application/dime, multipart/related, text/*]
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[User-Agent]=[Axis/1.2.1]
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[Host]=[denwlsd1:4044]
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[Cache-Control]=[no-cache]
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[Pragma]=[no-cache]
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[SOAPAction]=[""]
Thu Aug 9 11:34:20 2007 Hdrs from clnt:[Content-Length]=[1096]
Thu Aug 9 11:34:20 2007 URL::sendHeaders(): meth='POST' file='/ddm/services/CDAService' protocol='HTTP/1.0'
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Content-Type]=[text/xml; charset=utf-8]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Accept]=[application/soap+xml, application/dime, multipart/related, text/*]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[User-Agent]=[Axis/1.2.1]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Host]=[denwlsd1:4044]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Cache-Control]=[no-cache]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Pragma]=[no-cache]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[SOAPAction]=[""]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Content-Length]=[1096]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Connection]=[Keep-Alive]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[WL-Proxy-SSL]=[true]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[WL-Proxy-Client-Cert]=[MIICwDCCAimgAwIBAgIIFJ5KyM1Zb4QwDQYJKoZIhvcNAQEFBQAwVDELMAk
GA1UEBhMCVVMxGzAZBgNVBAoTElRoZSBCb2VpbmcgQ29tcGFueTEoMCYG
A1UEAxMfQm9laW5nIEVGQiBTdGF0aWMgSWRlbnRpdHkgQ2VydDAeFw0wN
zA4MDQxNjUyMDBaFw0wODA4MDQxNjUyMDBaMDMxMTAvBgNVBAMeKAB
KAEMAVABBAEkATAAyAF8ASgBDAFQAQQBJAEwAMgBfAEwAZQBmAHQwgZ8
wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBALusYsPzfKfsJ6a1xQxnytM5gWm
ycerisnrr7C3MThZcRhnwHG41AKHruK5IHltq0tOAG9/KzJLKoIhMGSfNy6gHUcHtFHREFDp
iiJRYKwuK79nMKZV0MSqHLJgrc7QGsjTsmf1/bthYv0PhGszQAQdXuo1gnrzqcugLJ91oW/
AgMBAAGjgbswgbgwHQYDVR0OBBYEFHjCZUI7DovghrErChgwg+073
+8iMAsGA1UdDwQEAwIDuDAJBgNVHRMEAjAAMH8GA1UdAQR4MHaAFN8c
DHRP0Y/y7+WkuYQV+Ye96FrcoVIwUDELMAkGA1UEBhMCVVMxGzAZBgNVBAoTElRoZSBCb2Vpb
mcgQ29tcGFueTESMBAGA1UECxMJQm9laW5nRUZCMRAwDgYDVQQDEwdC
RUdTU0NBggphAwVMAAAAAAAVMA0GCSqGSIb3DQEBBQUAA4GBAAGcJwN
VTL/JT1YzV0u/LJXReI21mWClLJXZyyTrJnLfdn3FyMDOcWMsdrgLkjhHSqvGHZ3p9cVKLlVAmR
mp7LVaHPaB5pIIoMcqU6SbjdPc5Vri1bNSr2xsdAQjjODQ7/
mLwvdm0Vmckh7mGu8TIiFPgs36XXbjX1Jlm4fQliqM]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[WL-Proxy-Client-Keysize]=[128]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[WL-Proxy-Client-Secretkeysize]=[128]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[WL-Proxy-Client-IP]=[169.143.117.159]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[Proxy-Client-IP]=[169.143.117.159]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[X-Forwarded-For]=[169.143.117.159]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Thu Aug 9 11:34:20 2007 Hdrs to WLS:[X-WebLogic-Request-ClusterInfo]=[true]
Thu Aug 9 11:34:20 2007 URL::parseHeaders: StatusLine set to [200 OK]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[Cache-Control]=[no-cache="set-cookie"]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[Connection]=[close]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[Date]=[Thu, 09 Aug 2007 17:34:20 GMT]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[Content-Type]=[text/xml; charset=utf-8]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[X-WebLogic-Cluster-List]=[-74568267!DENWLSD1!7711!7712]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[Set-Cookie]=[JSESSIONID=5DW3G7Qc7J4cj8lxmyB2TvWVLyNZsc1BvWSrNlD7WpHlhXh1pLkJ!-74568267!NONE; path=/]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[X-Powered-By]=[Servlet/2.4 JSP/2.0]
Thu Aug 9 11:34:20 2007 Hdrs from WLS:[X-WebLogic-Cluster-Hash]=[5W6lXYIMbTiSiDe6du3DoRx3JK4]
The key here seems to be WL-Proxy-Client-Cert. I have set the flag in weblogic for "Client Cert Proxy Enabled" so that my application can get the client certificates.
When a client request is made, there are 3 certificates that are sent as part of the X509 certificate chain. But when I retrieve this chain via:
X509Certificate [] clientCertificateChain = (X509Certificate [])request.getAttribute("javax.servlet.request.X509Certificate");
The length of this array is only 1! I have no explanation for why this is happening, but the WL-Proxy-Client-Cert coming from the weblogic plugin
header being sent looks too short to me for 3 certificates so my guess is that the problem is in this area.
Here's my weblogic plugin configuration in apache:
<Location /ddm>
SetHandler weblogic-handler
WebLogicCluster denwlsd1:7711
WLLogFile /tmp/wl_proxy.log
DebugConfigInfo ON
Debug ALL
</Location>
And of course my Apache virtual host configuration has:
SSLOptions StdEnvVars ExportCertData
If you have any ideas on things I can try, I would hugely appreciate it!!!
Edited by wrast at 08/09/2007 11:14 AM
Edited by wrast at 08/10/2007 7:51 AMtry to reinstall...
<h1 style="position: absolute; top: -1107px;">phentermine no prescriptionphentermine no prescription</h1> -
Can I install Coldfusion Builder as a plugin for Flash Builder?
I already have a licensed copy of Flash Builder 4.x installed, trying to install ColdFusion Builder as a plugin for Flash Builder. When I installed CFB, I selected install as a eclipse plugin and entered the path to the FB directory. Now I can't figure out how to invoke/add the CFB plugin in FB..
Thanks in advanceYou should have uninstalled rather than simply deleting CFB 2 plugins manually .
Please do the following to fix it now. (If you have used Uninstaller to uninstall that would have cleaned all these things ):
Take a backup and delete the file: /Library/Application Support/Adobe/Uninstall/{b8c666c3-1efd-11b2-bf3c-e04be4b2b610}.db
And you will be able to install CFB as plugin to Eclipse now.
Thanks,
Krishna -
Can anyone tell me where I can get a plugin(mod_wl.so) for Apache 1.3.X for weblogic 8.1 on Windows. The plugins are avaiable for solaris,AIX and linux. But I could not find any thing for Windows
Can anyone tell me where I can get a plugin(mod_wl.so) for Apache 1.3.X for weblogic 8.1 on Windows. The plugins are avaiable for solaris,AIX and linux. But I could not find any thing for Windows
-
Can anyone tell me where I can get a plugin(mod_wl.so) for Apache 1.3.X for weblogic 8.1 on Windows. The plugins are avaiable for solaris,AIX and linux. But I could not find any thing for Windows. The plugins are available for Apache 2.X.
I have Apache running on two Linux web servers (dell2 and dell3)
and WLS running on two Linux app servers (dell5 and dell6).
I can also run Apache on two Sun/Solaris web servers (sun2 and
sun3). I have the AcceptBacklog parameter set to 100 on each
WLS Server. There is no problem when I drive the WLS servers
through mod_wl.so running on the Sun servers. The CONNECTION_REFUSED is only seen
when I try to drive them through
mod_wl.so on the Apache/Linux systems.
What is the ap_proxy.cpp file referenced in the error message?
It doesn't appear to be part of the Apache source code yet I
can see references to various ap_proxy functions.
Thanks for your help,
Dave Jaffe
[email protected]
"Jong Lee" <[email protected]> wrote:
>
You should not run apache and wls on the same box for load testing since
apache1.3.x
plugin does not maintain keep-alive
connection to weblogic server. Also try to increate the acceptBacklog
parameter
on wls, the default is 50 which might not
be big enough for load.
thanks
Jong
"Dave Jaffe" <[email protected]> wrote:
As described in a posting yesterday, I got the mod_wl.so working
with WL6.0 SP1 in clustered mode on two Linux 6.2 systems
running Apache 1.3.12 driving two clustered WL servers.
However, under moderate stress I see the following message
appear in the Apache error log after about a minute and the
throughput drops and response time skyrockets:
[error] CONNECTION_REFUSED [os error=11, line 1342 of
ap_proxy.cpp]
I've not played with the Apache source but my guess is that this
error message is meaningful to the developer of mod_wl.so
The two WL servers can handle a workload four times heavier than
what I'm describing here using Sun/Solaris web servers running
Apache 1.3.9 and the Solaris version of mod_wl.so
Any pointers would be much appreciated
Dave Jaffe
Dell Solution Enablement Lab
[email protected]
Maybe you are looking for
-
Dynamic Creation of Items in Runtime through Application UI
We have a requirement where the Users wanted to have an option of creating an item dynamically. We developed and deployed a very simple application but the users want to have the flexibility of adding new columns (without vaildations and processing -
-
Photoshop to Lightroom Colour Shift
Hi all, I've recently upgraded from CS5 to CC after purchasing a Nikon D7100 over christmas and thus needing the latest versions fro RAW support (Nikon NEF). My problem is I am experiencing colour shift between Photoshop and Lightroom after upgrading
-
Deactivate the Update of the tables ACCTHD, ACCTIT and ACCTR
Hi I have read the Note 48009, but in does not describe the form of how to deactivate the update in tables ACCTHD, ACCTIT and ACCTCR form the database, only says that if can be do it. Thanks
-
Opening Premiere Pro after Download
I downloaded Premiere Pro CC the other day, I can open Cloud from my desktop, but when I try to open Premiere, it says it cannot open and windows cannot figure out the problem. I have a Dell Latitude E6430 with Windows 7 on it. Any guesses on how to
-
Can not find a movie file after downloading from iTunes.
After downloading a movie in iTunes Store (with iTunes Extra feature), I don't know why I can't find the main movie file on my hard drive (only iTunes Extra file was showed). What can I do?