Collaboration Forums Default Template iView

Hi,
I'am doing the configuration of "Integrating a forum in Collaboration room".
Initially i'am tring to create a Forum iview using the iview templte "Collaboration Forums Default iView" but i'am unable to see this template.
Can anybody please guide me how to get that template.
With regards,
Pradeep.B

Hi Pradeep,
Here is the relevant thread to your issue.
/message/4682911#4682911 [original link is broken]
Hope it helps
Regards,
Santhosh

Similar Messages

Collaboration forum iview error

Hello,
I want to work with Collaboration forum iview in EP7.0 SP13. So, I have installed the following software components (visible from EP System information):
<i>sap.com KMC-UI 7.00 SP13 (1000.7.00.13.0.20070827114000) SAP AG SAP AG 20071121151957
sap.com FORUMS 7.00 SP13 (1000.7.00.13.0.20070827114000) SAP AG SAP AG 20071121152111 </i>
Unfortunately, when I preview the Collaboration forum iview the following error appears:
<i>wrong iView configuration. further information can be found in the log file of your engine.</i>
And finally the log file shows the next error message:
<i>wrong iView Configuration: the iView property 'com.sap.nw.coll.forums.portal.ForumsView is not correctly set up. '' is an invalid value.</i>
Is another post-installation step necessary?
Could it be a permission problem?
Any idea?
Thanks in advance,
Marta.

Check below may be use ful for you
Steps by step configuration:
1.       Download Forums 7.0 Application from Marketplace.
In the SAP Service Marketplace access the download area using URL http://service.sap.com/swdc
In SAP Software Distribution Center choose Download->Support Packages and Patches-> Entry by Application group -> SAP Netweaver -> SAP NETWEAVER -> SAP NETWEAVER 2004s -> Entry by Component -> Enterprise Portal.
You need 2 SCA files from here. Forums7.00 and KMC UI Layer 7.00
Download SCA files necessary to install Forum Application.
->Choose Forums 7.00 and choose #OS independent
Download Forums 7.00 SCA file.
-> Choose KMC UI Layer 7.00 and choose #OS independant
Download KMCUI SCA file.            What does these files contain?
A forum 7.00 SCA file contains the actual Forums Application whereas KMCUI contains Forums Iview template.
2.       Deploying files using SDM
Start RemoteGUI.bat from \usr\sap\EBD\DVEBMGS00\SDM\program
Choose Deployment. Add Forums SCA file and KMCUI SCA file for deployment. Follow the 4 steps to complete the installation.
You need to restart the server for changes to take effect.
             You can see the Collaboration Forums iView Template in PCD.
Goto Content Administration -> Portal Content -> Content Provided by SAP -> Templates -> iView Templates
1.       Providing basic set of Forums Iviews.
After deploying forum application to your portal, you need to make the Forums Homepage and Forums Administrative functions accessible via Portal iViews.
Procedure: Create custom iView Template
SAP recommends to create a custom iView template as a delta link copy of the standard iView template delivered by SAP. The specific configuration of your custom iView template is not affected by new deployments.
1. In the portal, choose Content Administration -> Portal Content.
2. In the Portal Content Studio, open the folder Portal Content -> Content Provided by SAP -> Templates -> iView Templates.
3. In the context menu of the Collaboration Forums iView choose Copy.
4. Locate the target folder (a folder of your choice) and in its context menu choose Paste as Delta Link.
5. Rename the custom iView template so that in the iView creation wizard you can distinguish the specific iView template from the default one.
You may need to restart the cluster in order to see your custom iView template in the list of iView templates when you create a new iView.
2.       Create End User and Administrator iViews
Based on custom iView template for forums, you can create the required forum iViews. To work with forums you need following 3 Forums iViews:
            User view (Forums Home page)
            Administrator View (Admin Console)
            Initial Administration View
Procedure to create all these views is same only the iView configuration differs.
Procedure to create these iViews1. In the portal, choose Content Administration -> Portal Content.
2. In the Portal Content Studio locate the target folder for your new iView.
3. In the target folder's context menu, choose New -> iView.
4. Select the custom iView template for forums.
5. Enter the required values and in the last step choose Finish.
6. Select the option Open the object for editing.
To configure each iView, open property editor of the iView.
a.      User View
1. Select the property category Forums Configuration.
2. For the property View on Forums select Forums.
3. Select the property category Navigation.
4. For the property Quick link enter forums.
b.      Administrator iView
1. Select the property category Forums Configuration.
2. For the property View on Forums select Forums Administration.
3. Select the property category Navigation.
4. For the property Quick link enter forumsadmin.
c.       Forums iView for initial Administration
1. Select the property category Forums Configuration.
2. For the property View on the forums select Add Forums Administrator User.
This iView is used to set Forums Administrator User. Whenever you want to set a new administrator for forum, use this iView to set it.
3.       Create roles and set Administrator for Forums
Now you have all the iView required to work with Forums application. Please create a simple role, name it as Forums Admin and assign all the 3 iViews you have created to the role.
Create a End User role and include only User View (Forums Homepage iView) in the role.
Assign this new role to a portal user. Login to portal using this portal user.
Setting Administrator for forum Application.
            Navigate to Forums role -> Initial Administration iView.Note: To Access this Initial Admin iView, Portal user should be in Administrators Group. Alternatively, the portal user should be member of the application-specific J2EE security role named JiveAdminDefinitionRole. (cf. Security Provider for the sap.com/com.sap.netweaver.coll.forums)
In this iView, enter a portal user and choose Set User. This user will be New Forums Administrator.
Now you have set a Forums Administrator. Login using this portal user, don't forget to attach Forums Administrator role to this user.
4.       Creating Categories and Forums
Please login to portal using forum administrator ID. Choose your forum role from TLN and choose Administrator iView.
To create a category, choose Categories summary. You need to create a new category in Root Category. Choose New Sub Category.
In Create Category, give a appropriate name for your category and choose create.
You have created a new category. You have to create forums in this category now.
Choose you newly created Category, and click on "Create New forum"
Give appropriate name and description to your forum.
You can decide what permissions you want to assign to the forum. You can change the permissions later as well.Choose Create Forum and you are all done with your basic configuration. All you have to do is, access User View (Forums Home Page view), and start posting.
Regards
Krishna.

How can I change the application default template

Hi!
If I go to Application Shared Components | Definition | Template Defaults I can see the default page template used by my application. One would think that this is the place to change the default template if wanted to change it, but NOOOOOOO..., like many other things ApEx that's not the way you do it. (An example is the order of columns in an interactive report... all those up/down arrows in there mean nothing if ApEx sets the column default order differently from what you set in the query source or the report attributes section. Nope. You have to log into the application as a developer, edit the column order in your interactive report, and save your report as the default, and THEN you'll get your ordering right. What are these ApEx developers thinking I just don't know...)
I've search around the forums but I haven't found my answers (perhaps I haven't searched hard enough).
So, how do I change the default page template for all pages in my application?
Marc

...and once there, if you click on any of the templates looking for a way to set any of them as the default you'll be looking all day. You see the default column with check marks... why not implement the ability to check/uncheck defaults right there?
Alas, if you click on Edith Theme <no>, then you can set the default template. It's a little link to the right under Tasks.
My bad for still not understanding the way the ApEx interface works. It certainly isn't intuitive to me, but that's just me. Hopefully I'll get better.
Marc

Default template for Information broadcasting

Hi,
I got the info that template 0BROADCASTING_TEMPLATE70 is the default template for Broadcasting but when i try to open it in WAD then it outputs 'No object Found'.
Even if i try to find it in BI Content, i do not found the one with the specified name.
any idea which default template is used in for Infoarmation Broadcasting.
Its very urgent.

Hi Satish,
Unfortunately It is not possible in standard. I also checked ECM_EXIT but I was not able to find any specifc interface for long text. You can try this is General abap forum as Long texts generally belong to Basis more then an appication area itself.
Thanks
Amber

Variable Screen of Web Template iView

Deployed Web Template iView to Portal. But when ever i click on the link of the web template iview in the navigation panel in portal. Variable screen comes up first which is mandatory. Is there some way in the web application designer that i fill up the mandatory variable screen with values through some ABAP table interface or by using text elements web item without letting variable selection screen show up initially in the portal.
I cant make those variable values default by going in BEx because those varaibles are global variables and getting used in many queries.
Any help will be appreciated.
Thanks

We've just implemented a NetWeaver 2004s system, and these hints may help you out:
1. In the Web Application Designer, there is a property on the web template which determines whether the variable screen is displayed or not. Therefore, you could uncheck that checkbox, and the variable selection screen won't be shown.
2. As to defaulting values in the selection screen ... we have used ABAP code to default values in variables. I think it was done in the start routine. The code we have implemented works, but then we present the variable selection screen to the user, so I can see that certain values (like date for example) are defaulted. I am not sure what happens if you default these values and then don't present the selection screen ... assume it would work for you though. Check on SDN and find out about pre-popup ABAP code for queries, I am sure you will be able to find something that helps you out.
Cheers,
Andrew

How can i call a collaboration room from a iview ?

hi all,
i have a little problem: i want to call a collaboration room from a iview - but i can't find the way to do this.
can anybody help me ?
thanks
and regards
martin

click on the context menu of the collaboration room > send room link and you should receive the link in your inbox if your email is configured in Portal..
hope it helps

How to change the default template for a concurrent prog ?

Hi i have Std Conc prog "Payables Posted Invoice Register". It has a std template with same name "Payables Posted Invoice Register". Now i have created a custom template and attached it to the same Data Definition.
The Requirement is that only particular users will use the custom template, hence they will chose it while running. BUt what happened now is in the Conc Prog submit screen it is taking my custom template as the default one.
Hence majority of the users wudnt look at the template and get the custom o/p.
I want to make the std template itself as the default template and make the custom template available to chose for a smaller set of users.
Thanks,
Vj

Hi Shadab,
Yes, that is a valid work around but my task is not to create a seperate data definition and a seperate concurrent prog for it. I HAD to use the standard concurrnet prog but jsut add my template as a non defaulted template.
Anyways, i have solved it now. This is how
System Adminitration => Concurrent Programs => select ur Concurrent Prog => Update => OnSite settings .... select the template you want to default.
Thanks,
Vijay

HTTP error [403] in "Add Forums Administrator User"-iView (Forum)

Hi All,
I need help with installing the forum functionality.
When I open the "Add Forums Administrator User"-iView I always get the following error message:
<i>403 Forbidden
You are not authorized to view the requested resource.</i>
In the log-file I found the following message:
<i>User tfelp4, IP address
HTTP request processing failed. HTTP error [403] will be returned. The error is [You are not authorized to view the requested resource.No details available].</i>
I must say that my useraccount has Superadmin-Permissions...
The "Forum"-iView works without problems, but there are no forum catagories, cause they must be installed for using.
Hope someone can help me
Thanks in advance
Steve

Hi Trevor,
thanks for your reply. What does it mean <i>"The actuall permissions must be given on the WEBAS"</i>? In my understanding the Userprofiles and the assignment of permissions to a profiles are stored in the UME. In my mind I can do that within the portal environment.
Hope you can help me...
@All: Does anybody has similar problems?
Bye and Thanks
Steve
null

How To associate a default Template with an asset in web center sites 11g

In previous versions we could associate a template with an asset, in the edit mode of the asset and that template would be used to render that asset when previewed.
How can we do that in Web center Sites 11 g so that we don't have to select it again and again.

You should still have that option, in the Contributor UI when you edit or inspect an asset beneath the asset name is a drop-down box to select the default Template for this asset.
Phil

How to remove extra header/footer from BC default template?

BC put their own header (with live links to dummy pages) and footer (two line of text on the bottom) in my Dreamweaver CS6 job at http://140001.worldsecuresystems.com/
Although I'm in the directory I can't seem to delete theses items,
the Main Template.dwt inside the default Templates folder.
I can't even delete the code inside it and leave it as an empty file.

Tobydog20,
I eneded up having to log in directly at Business Catalyst, not going through DW at all. There I entered a completely different mode, many more folders were visible. There it should also show you the template folder (the one you can't delete) belongs to your current DW project, which is why you can't delete it. You should see the other files that you can delete -- it's an entirely different experience going through Business Catalyst.
An extra caution, Adobe also added some new CSS global sheets to MY project that weren't in my original upload, so keep an eye out. I discovered this when I had to add code and I swore that page didn't belong to my job. Well, it did.

Edit ContactSheet_ID.jsx to include default template

We're using Bridge CS3 to generate contact sheets with InDesign CS3 using Bridge CS3's Tools > InDesign > Create InDesign Contact Sheet command. We've defined an InDesign template which we're using for these contacts sheets but find it annoying to have to browse for the template each time. Saving your settings with a Preset doesn't record your template selection so there's no joy there either.
Not being at all savvy with Javascript, does anyone know how to edit ContactSheet_ID.jsx so that a default template is already input when the Create InDesign Contact Sheet command is invoked? Or perhaps to change the behavior of saving Presets so as to include this default template information? We'd want to locate the file at a universally locatable path such as a user's documents folder or the InDesign folder or on a server, etc. so that all users could easily use the command with expected results. The solution would ideally be for the Mac but any would be great too!
Thanks!

Is this not easily implemented? Or has everyone moved on to CS4? Just curious...

PSE 9: How to set the default template for albums

In Photoshop Elements 9, when I create an album (prior to sharing online), the default template (looks like a notebook) is not something I would ever use. So each time I have to find a better template ("Classic" is fine by me), select it and regenerate the album. Can I set a different default template? How?

I think to keep with a slightly better paradigm:
Create a view and pull your user data from there and not the actual entity table In the view the name is already "expanded" and its in the
[LastChgUserName]
column. Then Etl it with a job or anything else via Staging back to the entity if that is what you want. Or just pick it up in the View with the rest of the data if this is going to be needed for some external process.
Moscva ato kak derevnia ? :)

Change default template for a given Theme

Can we change the default template for a theme ? (if yes, how). I had selected theme 3 (business) during the creation of my application with 2 level tabs. After creating parent tabs and standard tabs and getting it working I changed the theme to theme 12 (blue). When the theme got switched, the default application page template became a 1 level tab.
This was because for Theme 12, the default Page template is 1 level tab. I want to change this default Page template to 2 level tabs. I couldn't see option of making this as a default.

Sorry, I found the answer in the documentation in Chapter 7 under
"Changing Default Templates in a Theme".

How do you clone the "Default" Templates V1.6

Does anyone know how I can clone then use the Report Template called "Default Vertical Look 2" in V1.6? I've created a new theme and the associated repository templates, but that does not list the "Default" Templates. I want to change the colours of the template background in a vertical style report.
thanks in advance

yes, thank you i see that.
i don't know much about servers, but it kind of sounds like i would be running the OS from a server and not the individual macs. i don't think that will work for me either.
it sounds like i will need to by the multi-license then exchange the DVDs for CDs so i can install on the G4 DP 533.
i could use the clone method, but the mac isn't really a clone, they have their own identities in mutlti-user log in.

UML : Customizing default templates ?

Hi,
Can we customize the UML JavaDoc templates used by JDev. The current template has some limitations like not providing paragraph tags and list where needed and we have to go to the source code and manually edit them. It 'll be great if we can change in the template, so that when we click on the Use-case and navigate the doc, we have the things inplace.
example, the default template doesn't provide a paragraph tag after pre-condition.
<h3>Precondition :</h3>
<h3>Postcondition :</h3>
               <blockquote>
               <h4>Minimal Guarantee(s) :</h4>
if we can edit the template to..
<h3>Precondition :</h3>
<p> </p>
<h3>Postcondition :</h3>
               <blockquote>
               <h4>Minimal Guarantee(s) :</h4>
so that we don't have to go to the source each time.
Regards
Elango.

Hi Lisa,
Im using JDev 10.1.3.0.2.223 and trying to configure de default templates. After looking on the online help, google, TechNet and finally the threads, found your post on 'Editing Use Case Templates' .
I did find the template on a .jar file, but the path does not stand to what the online help says and I quote it here :
To open a use case modeler template: Choose File Open, then navigate to the <jdev_install>/jdev/system/oracle.bm.XXX/templates/usecase <<<<< this path doesn't exist <<<<<<<<<
I didn't try it yet, would it be the case to extract the files from the .jar update the templates and recreate-it ? ..
Tks in advance,
Fred

Collaboration Forums Default Template iView

Similar Messages

Maybe you are looking for