Collaboration link from the tool area

hello,
has anyone any ideea how can i change the name of the link "collaboration" from the tool area, from the left of search.
thx

Hi,
Import the file com.sap.portal.navigation.toolarea.par from the portal, open it with NWDS, look for the file toolAreaiView_nls.properties inside PORTAL-INF\private\classes. find the CLP_LINK_TEXT and change the value to whatever you want. you can also change the files of the individual languages.
Redeploy the par file back to the portal.
It is better if you can deploy it as your own toolarea for future upgrades.
Best Regards,
Avishai Zamir

Similar Messages

Links from Search Results are not resolving or take a very long time.

The searches happen fairly quickly, but the links from the results are not resolving. I am unable to get the information I need. It appears there are performance problems with the site.
Lennie

This is the same problem I just posted on for searching DOC SITE!

How to I set an internal link in a PDF document using Preview? After setting a link under the Tools/Annotations menu, the link doesn't work and no detailed instructions are provided.

How to I set an internal link in a PDF document using Preview? After setting a link under the Tools/Annotations menu, the link doesn't work and no detailed instructions are provided via the Help menu other than it showing the pull-down menu selection to make.

No. I am able to use the other features such as underlining, highlighting, adding rectangles and oval and save those changes.

Why does the clone stamp work when I go from a darker colour to a lighter colour but not the other way around. How can I lighten up a dark area? Lasso tool takes from the wrong area too.

Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.

c.pfaffenbichler wrote:
Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
And what kept you from posting a screenshot?
I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos. You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image. I've uploaded it at the size it was supplied to me at (about 2700 pixels wide). So
Click to open the full image, right click and copy, and paste into Photoshop.
Select the clone tool, and set its blend mode to Darken.
Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
It works even better if you clone on a new layer also set to Darken. No masking, just Photoshop blend mode magic.
You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem.

I couldn't migrate outlook .pst files to thunderbird.when i tried to import from the tools tab all the options are grayed out.

I couldn't migrate outlook .pst files to thunderbird.when i tried to import from the tools tab all the options are grayed out.

http://kb.mozillazine.org/Import_.pst_files

Help Please - having difficulties creating af link from the text to an attached file i acrobat

I have been reading the help, but it just wonn't work when I try.
I have tried as followed (I am working with a danish version, and hope to matched the same word as in the english version of Acrobat Xpro):
1. From the toolbox i choose content and then 'hyperlink'
2. I mark the text from which i wish to make a link
3. Acrobat respond with an popup picture 'create a link'
4. From the popup I mark 'Open a side' and push 'next'
5. Acrobat respond with a new popup picture 'create / go to a side'
6. I go to the navigator and open the list with attached file's that I have embedded in my acrobat file.
7. I mark the to which i wish to make a link to
8. In the popup 'create / go to a side' that stilll is open, i push 'Mark hyperlink'
Then I hoped that I have created a link from the acrobat text to the attached file. In stead Acrobat has made a link to the same sidenumber that respond to the text from which i wish to make a link . F.ex. the linktext is on side 10 - then the link goes to side 10.
How do i do it right?
Please help.

Hello Bernd
Thanks for a quick respond.
This corresponds to the text I have tried myself, but apparently I do something wrong
1. Open a PDF that contains a PDF file attachment – done
2. Go to where you want to create a link. If that location is in the file attachment, click the Attachments button in the navigation pane, select the file attachment, and click open.
Here I go to side number 10 from which I wish to make a link from (I am not open the attachment file at this moment, as the location not is inside the file attachment).
(I earlier also tried to mark the attachment file and click open, and It result that the attached file just opened normally without creating a link to the file).
3. Choose Tools > Content > link, and select the area for the link
Here I mark the text on side 10 from which I wish to make a link to a attached file
4. In the Create Link dialog box, set the link appearance, select Go To A Page View, and then click Next
Here I have selected ‘Go to a page view’ as told and I click Next
5. Set the page number and view magnification you want, either in the parent PDF document or in the file attachment, and then click set link.
Here I go to the navigation pane and mark the attached file from the file list (the files in the list hasn’t any side number in the list) and then I click Set Link.
Then I hoped that I have created a link from the acrobat text to the attached file. In stead Acrobat has made a link to the same sidenumber that respond to the text from which i wish to make a link . F.ex. the linktext is on side 10 - then the link goes to side 10.
What do I do wrong.?
Med venlig hilsen
Mogens Pedersen
Specialkonsulent
T 33 63 13 07
F 33 63 10 11
[email protected]<mailto:[email protected]>
Fra: Bernd Alheit [email protected]
Sendt: 2. marts 2012 13:11
Til: Mogens Pedersen
Emne: Help Please - having difficulties creating af link from the text to an attached file i acrobat
Re: Help Please - having difficulties creating af link from the text to an attached file i acrobat
created by Bernd Alheit<http://forums.adobe.com/people/Bernd+Alheit> in Creating, Editing & Exporting PDFs - View the full discussion<http://forums.adobe.com/message/4241290#4241290

There was a button/plug in that alloyou to search and dowmload MP3 from the tool bar it is no longer there how can I find it?

There was a button/plug in that alloyou to search and dowmload MP3 from the tool bar it is no longer there how can I find it?

The add-on you are looking for may no longer be available.
Do you remember its name?
Go to the '''[https://addons.mozilla.org/en-US/firefox/ Mozilla Add-ons Web Page]''' {web link}
(There’s a lot of good stuff here) and search for what you want.

Problems about How to Merge the Masthead and the Tool Area?

I have been struggling for many weeks about how to add the ToolArea into the Masthead. Can someone please help me?
I followed with the tutorial :[How to Merge the Masthead and the Tool Area|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f058ef9c-b211-2a10-4fad-8b88d5a1fe74?QuickLink=index&overridelayout=true]
I followed every steps mentioned in the tutorial but end up with these:
1. In this tutorial there is a word:Just before the link table is ended, add another row for the tool area. Unfortunately I am not familiar with JSP so can anybody please tell me the accurate inserting location of this code.
2. Besides I find there are some faults in this tutorial and It is non't very complete.
    For example the author have non't refer to two jar:
    I have copyed the (com.sap.portal.navigation.masthead_core.jar, com.sap.portal.navigation.toolarea_core.jar).from the     standard par files and paste these JAR files in the PORTAL-INF / lib folder in the NWDS.
   who can tell me there are additional faults or complements about this tutorial?
Please suggest.
Best Regards
lexian

Hello Prashant：
   I have imported the par file which you just send for me, Fortunately It is running OK！
   I am very happy,thank you very much,you give me a great help.
      I hope obtain you help for the future,you are a goo person.
     Thanks a lot!
     Best Wishes for you!
     lexian.
Edited by: le xian on Apr 22, 2011 10:43 AM

Make the link from the single cell of Bex Report and the image of bill

Hi guys,
my client scan every bill and archive the image by File.net technology.
In our Bex Report we have the Bill number and we want to make the link from the single cell and the image of bill.
The possible paths to solve the problem are:
Replicate the image in BW and crate a link from the single cell and the image of document.
Create an URL link from the single cell and the image of document archived on File.net server.
In witch way we can to implement the two paths?
Thank you.
Alessandro

Hi Alessandro,
Have you seen "How ToEnhance your Web Query with the Table Interface"?
You can find it in media library:
https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000194044
Best regards,
Eugene

Taking long time to load from the planning area to the cube since cvc big?

Hi all,
We have a huge number of cvc for various countries, while we are planning to load the data from the planning area to the cube using those cvc it consuming 40 hours.
I happneed to check the cvc are more than 15,000 that is one reason. But i still need to improve the time taken to load the data from the planning area to the cube using the process chain.
I happened to split the process chain to load data respectively to the sales organisation but still the same!!
Can anyone help me nor recommend the sap process to improve the data loading from planning to cube in apo demand planning?
Thanks
Pooja

Hi Pooja,
15K is not huge at all. We have worked with 50k and still managed do the extract into cube in about an hours time.
Pls help me understand a few things, so that we can help you better.
1) Number of KF?
2) Number of Periods?
3) Key Figure Storage types - Is there any KF stored in Infocube rather than Time Series, this can be found in the Key Figure details in the Planning Area.
4) Pls explain your data flow like PA--> Datasource --> Communication Structure --> UPdate rules --> Cube???
5) Are you using Parallel extraction in your Datasource? This can be checked in Data Extraction tools from your Planning Area Screen.
Few general tips.
1) Parallelize your datasource.
2) Load into PSA and Infocube parallely.
3) Do not include KF stored in Infocube for your backup, use only KF stored in LC.
Thanks
Mani

The Help Link from the Application Pages Does not Work for Peoplesoft Campus Solutions 9.0

Hi everyone.
I have a problem, I have been trying to set up the Help Link from the Application Pages for Peoplesoft Campus Solutions 9.0 according to the instructions given in the Document: http://docs.oracle.com/cd/E17566_01/epm91pbr0/eng/psbooks/EnablingtheHelpLinkfromApplicationPages.pdf , (referenced in the Doc ID 1289101.1, E-PB: How to Set Up the Context Sensitive Help with Hosted PeopleBooks using Universal Linking).
I follow the instructions of that document carefully:
I go to: PeopleTools -> Web Profile -> Web Profile Configuration
    2. Then I choose the Web Profile: "Development".
    3. Then Change the value for the Help URL field by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5 , the ctx parameter selected is the one that correspond to the Campus Solutions (hrcs90r5) according to the Product Line Code Table (ULinkID) especified in the mentioned document.
    4. Stop the Web Domain and Clear cache.
    5. Start the Web Domain again.
After setting up the Web Profile Configuration I test the help links, thas is why I click in the Help link in any Peoplesoft CS 9.0 Application Page (modify a person), but the next error message appears: "We're sorry, the topic you requested was not found.".
I tried many combinations with the ctx parameters URL but it does not work yet.
I did the same test, but this time using the Help URL field with a HRMS ctx parameter by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hcm92pbr5 , and It works fine !!!
According to the previous test you realize that It works with HRMS ctx parameter but not with Campus Solutions 9.0 ctx parameter, Does anybody know what else can I do ? Am I doing anything wrong or missing? or maybe the Oracle's ctx parameter for Campus Solutions URL It is broken simply.
Thanks for you help and feedback.

2799444 - The page you are testing with appears to be a Workforce Administration page. Is that correct?
The CS PeopleBooks would only work for CS pages, e.g.: try navigating to Main Menu > Campus Community > Personal Information > Add/Update a Person
Also, you can use multiple ctx parameters:
E.g.: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5&ctx=hcm92pbr5&ctx=pt852pbh2
This way the help would work for the HR related pages like Workforce Administration, Campus Solutions pages like Campus Community and also PeopleTools pages like Web Profile Configuration. Hope this clarifies your question. Thanks!

Unable to Create Fact and Dimension tables from the Tools menu in EIS conso

Hi All,
In the EIS console, I am unable to create the fact table and the dimension tables to produce my OLAP model from the TOOLS menu whereas I am able to create them by dragging from the left panel where the tables are displayed. I am geeting the below error message:
"An exception occured while retrieving OLAP model metadata. Please verify you are connected to the catalog and try again"
Any help appreciated.
Thanks,
Raja

I have fact and dimension tables in one server and i moved those stuff to another server.If I do that what happen to essbase and about totale EPM System.I want to know how to do this and what I can expect?
Please reply

How to remove the Personalize link from the table layout displayed on Page.

While i create a new page and a table layout is created on this page it displays a link called Personalize this table. For every table i create the same is displayed.
If 10 such table layouts are there i get personalize options on all such 10 layouts on same page.
If anyone of u knows @ this please help me out how to remove that link from the page.

You can set the value for the profile FND: Personalization Region Link Enabled / FND_PERSONALIZATION_REGION_LINK_ENABLED to No.
For additional information, please check the Personalization topic of the Oracle Application Framework Profile Options chapter in the OA Framework developer's guide.

Need to add a link to the masthead area of the Portal

Hi
I need to add a link to the masthead area of the portal. That link needs to be able to print the content of the current page.
Ihave downloaded the com.sap.portal.navigation.masthead into the NWDS.
Can anybody please let me know where exactly to modify the code.
i am guessing i may need to use window.print() to print the page.
Thanks
Sharath
Thanks
Sharath

Step 1: Adding new link in the masthead
1. Rename the par file to your own namespace and import the PAR using eclipse
2. To add your link - modify HeaderiView.jsp appropriately
3. Build the PAR and export using Eclipse
Step 2: Create an iView
1. Content Administrator -> Portal Content -> Select the folder in which you need to create the masthead iView. Right click on the selected folder and "Select New From PAR" -> iView
2. Select the PAR file name created by you in Step 1 a
3. Choose "default" in Portal Component Selection
4. Provide the properties for the iView and save
Step 3: Modify Portal Masthead
1. Add the iView created in Step 2 to the Framework Page of your application
2. Remove the existing Masthead iView from the framework page and add iView created in Step 2 in the framework page.
3. Note that the position should be the same where the previous masthead is removed.
Logoff and logon with the user who is assigned the framework page - you should be able to see the new masthead with links
Incase you are changing the default framework page and default masthead ensure that you have a backup so that you can revert.

Why is the word count different when I use word count from the tools menu to the number at the bottom of my mac word document

Why is the word count different when I use word count from the tools menu to the number at the bottom of my mac word document

This forum is for Apple's defunct office suite 'AppleWorks' - since the word count is not in the places you mention I assume you are talking about Microsoft Word? Though it's just possible someone in this forum might also use Word and know the answer, you would stand a higher chance of getting an answer in Microsoft's own forums. You could also try asking in the forum applicable to your operating system - Lion, Mavericks or whatever - on the reasonably chance of finding someone familiar with Word.

Collaboration link from the tool area

Similar Messages

Maybe you are looking for