Collaboration Rooms and Document Uploads from Network

Hi,
We are starting to use Collaboration Rooms and would like the Documents iview to point to our network file system, so when a user uploads a file he can do it via the portal or our network drive. We are using FSR's elsewhere and are wondering how to incorporate it into a collab room document iview. Our portal environment is NW04 Stack 12.
Any assistance would be most appreciated.
Thanks,
Kris

Hi Kris,
what you need to do is to create a collaboration room template that would integrate a KM Navigation iView that points to the file share. Of course, first you need to integrate the share via repository manager in KM.
I hope you know how to integrate the share into KM. For more on how to create a room template check the info in this thread:
Collaboration Room Creation error on NW04 SP9
Hope this helps,
Robert

Similar Messages

  • I just got tOhe iPhone 4Gs today and had contacts and photos uploaded from another phone synced new phone with iTunes for music and accidentally restored it so all my old iPhone stuff is on the new one is there any way to fix this

    I just got tOhe iPhone 4Gs today and had contacts and photos uploaded from another phone synced new phone with iTunes for music and accidentally restored it so all my old iPhone stuff is on the new one is there any way to fix this ?! Please help !!!!

    Could you be more specific about what exactly do you want to fix now?

  • Collaboration rooms and Inner Page == embedded

    Hi,
    does Inner Page Isolation Mode has always have to be set at URL?
    When we set Inner Page Isolation Mode to Embedded the collaboration rooms and collaboration detailed navigation are not working anymore and the browser is redirected to:
    http://somecompany.org:50100/irj/portal?standAlone=true&windowId=WID1243256552687
    Any ideas what could be the cause and how to fix it, besides setting Inner Page isolation mode to URL?
    Maybe EPCM.doNavigate used in collaboration rooms requires that the Inner Page Isolation Mode should be set to URL?
    Regards,
    Ladislav
    Edited by: Ladislav Pomezny on May 25, 2009 3:34 PM

    I've set inner page isolation mode to url.

  • What happened to my playlists? I just loaded version 11.0.4.4 and all my playlists and songs uploaded from CDs to iTunes disapeared!!!!

    what happened to my playlists? I just loaded version 11.0.4.4 and all my playlists and songs uploaded from CDs to iTunes disapeared!!!!

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping.  Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
    In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library as iTunes Library (Corrupt) and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
    tt2

  • How to create Collaboration Rooms and Discussion Forums

    Hi,
    I want to create Collaboration rooms and Discussion Forums for local portal. I am using EP 7.0 SP9. Can any body tell me detailed step by step to create these things?
    Is is possible for local portal or need any configuration or something else?
    I dont know that thing so any body help me in this regard.
    Regards,
    Krishna.

    Hi Krishna,
    Please go through these links:
    Creating Rooms:
    [http://help.sap.com/saphelp_nw04s/helpdata/en/44/5ea05d12334ddfe10000000a1553f7/frameset.htm]
    Discussion Forums:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/44/93780e2d206999e10000000a11466f/frameset.htm
    How to Integrate a Forum into a Collaboration Room (NW7.0):
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80e5bf16-fe22-2a10-15a2-a613b4bcef1b]
    Hope these links will be helpful for you.
    Regards,
    Ganpati Jha

  • When I sync my iPhone 4S to my computer, where is the baseline data and documents coming from? Is the iPhone's set of apps and data the default set or are the apps and data on the computer (in the backup? in iTunes?) the default set?

    I am having a great deal of trouble with the upgrade to ios 7 on my 4S. The syncing and the software updates always leave generic icon apps that I have downloaded in the past but have deleted from my phone. But they keep reappearing. A restart of the phone fixes the icons but they are loaded not at the last page of the home screen but on completely random pages, screwing up my app and folder layout.
    I want to completely wipe the phone and restore the apps one by one, but I am concerned about whether the data and documents for those apps that I reinstall will be intact. Does the syncing for the apps on the phone retrieve the data from the last backup on the computer? If so, does it only sync the apps on the phone or does it try and reinstall all the apps that there is data for in the backup? In other words, does the resulting set of apps and data reflect the current state of the phone or the saved state of the backup?

    Apple guys are deleting posts. I have found my posts have been deleted. Apple should MUST let us downgrade at least to previous release from current which was working fine.

  • IPad, iPad2 Video Calling to Video Endpoints and Document Sharing from iPad2.

    Hi,
    Please discuss your expertise on the below mentioned requirement.
    One of our client wanted to share their Document/Presentation from iPad.
    Please suggest if there is any licenses/servers required to achieve the same requirement
    Also, Can iPhone initiate a video call to video endpoints e.g. EX60, or EX90.?
    Please discuss!
    Regards,
    Manish Gupta

    Mmm, yeah, it's far from perfect, don't know about having to buy both iPhone and iPad apps, we bought just the iPad app, was fifty-something aust.dollars, which my employer is happy to pay as we're always looking for something like this whilst we're hoping and waiting and waiting and waiting for Movi - if that ever happens.
    The iPad version also uses credentials created in the TMS provisioning directory, which is a good thing for us as it means we can use the same log-in as with Movi.
    Would be great if it could get the provisioning phone book etc, but that's not important for what we need this for, it does have a local phone book though.
    Aspect ratio is, as I said earlier, and as you saw, not exactly perfect when connecting to a MXP or C-series...and yes, not being able to rotate the image with the device is a bit disappointing, considereing the price.
    Would I've bought for myself or for any of our users? No, definitely not.
    Having said that, we can use it on the office iPad as part of the support kit for the techs when they're out and about. We all have employer issued iPhones as well, but the iPhone screen is just not large enough for our needs; which includes remote access and operation of AMX control systems, codecs, TMS etc.
    They probably should've done a bit more testing before releasing it though.
    jens

  • Documents uploaded from SharePoint Task to a specific document library

    This is done in SharePoint online. Users get assigned a task. (I am doing this from workflow using SPD). They need to upload a document and save the task. (I am using a multiline textbox with rich text for this).
    Questions:
    1. Is there a way to have the documents go to a certain document library? When we have a rich textbox, the default save location is 'site assets'. Is there a way to have the default location to a certain document library?
    2. Is there a way to force a certain naming format to the document?
    3. Is using a multiline rich textbox the right one?
    Would appreciate any pointers.
    Thanks, Faye

    Hi Faye,
    According to your description, my understanding is that you want to change the destination library where the document would be uploaded to in the multiple line of text column.
    #1. We can choose the destination library when we upload the documents, please refer to the picture below:
    #2. To force a naming format for the documents, I recommend to create another workflow associated with the destination library to update the name of the documents and set the workflow to start when an item is created.
    #3. To achieve this goal, use the multiple line of text column is a good way to upload documents by OOB. You can also create workflows in Visual Studio to enable users to upload documents.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/c8c8ad46-ab67-4966-8b81-3afda8a86da9/upload-a-document-from-a-task-form-in-a-sharepoint-2013-visual-studio-workflow?forum=sharepointdevelopment
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • User account and Documents wiped from my PowerBook

    Hi,
    I need some help here... I bought a brand new MacBook pro on friday and set it up using the setup assistant. I did skip the migration Assistance to do this later. Both Laptops are connected to my wifi network at home and I am using the same account and passwords.
    A day later I started up my old Powerbook and all my settings, my user folder all documents and also everything on the desktop had gone. But looking at my hard drive space I know it must be somewhere as it is stiill the same free space as before...
    Any tips how I can recover my files and setting, or where they have gone??
    Thank you!!

    While logged into the troubleshooting account (assuming that it's an admin account—if not create a new one and log into it), backup the bad account's folder, delete the bad account, selecting the save data option (which is stored in /Users/Deleted Users/ as a disk image), recreate the bad account using the same username/password combo, log out and back into the recreated original account. If the problem's solved, open the saved data dmg file in /Users/Deleted Users/, open the /Library/Preferences/ folder from the saved data, open the current /Users/restored account/Library/Preferences/ folder, and slowly copy plist files from the saved data folder to the current one that don't exist in it. Log out and back in to ensure there's no conflict and things still work correctly. Resolving conflicts or identifying corrupt plist files is a laborious process. Good luck.
    See http://discussions.apple.com/thread.jspa?messageID=4703015 for more details on this process.

  • Flat File Upload from Network

    Hi gurus,
    i understood that there is a posibility to upload data from a flat file directly from the network. I know how to upload it from the PC, but how do I put the folder on the network?
    Thanx,
    Ramona

    Hi Ramona,
    First of all make sure, that every user has sufficiant auothraization for durectory required on application server,
    Now  you (or the users) are able to access it in windows after  mapping  to a drive represented by a caharcter ( e.g. ''R").
    This is done in Windows Explorer "EXTRAS". It will appear as a new folder in explorer and can be handled like a "normal" one.
    If you have any doubts contact your basis guys, they are surely familiar with this process.
    Hope it helps
    Joe

  • Reg: Document upload from DMS to local System

    Hi All,
    I have to download documents from DMS to my local system. I am following:
    1) CALL FUNCTION 'BAPI_DOCUMENT_GETDETAIL2'
         EXPORTING
              documenttype    = 'XXX'
              documentnumber  = 'XXXX'
              documentpart    = '000'
              documentversion = '00'
         IMPORTING
              documentdata    = ls_documentdata2
              return          = ls_return
         TABLES
              documentfiles   = li_documentfiles.
    2) Getting file name & path from li_documentfiles & changing the path &  name of the file.
    3)   CALL FUNCTION 'BAPI_DOCUMENT_CHECKOUTVIEW2'
             EXPORTING
                  documenttype    = 'IBD'
                  documentnumber  = 'WWI-00000000000000000086'
                  documentpart    = '000'
                  documentversion = '00'
                  documentfile    = ls_documentfiles1
             IMPORTING
                  return          = ls_return
             TABLES
                  documentfiles   = li_documentfiles1.
    Summary:
    1) CALL FUNCTION 'BAPI_DOCUMENT_GETDETAIL2' - it does not return file name & path
    2) i am changing path name & file name & passing to  ls_documentfiles1.
    3) CALL FUNCTION 'BAPI_DOCUMENT_CHECKOUTVIEW2' - This F/M does not save the file into given path. It always stores at "C:\Documents and Settings\TEMP\SapWorkDir". Also Name of the file is determined by the system. The file name which i pass, is not taken into account.
    Kindly help me out to download the document from SAP to my local system.
    Early response will be highly appreciated.
    Best Regards,

    Hi,
    Try this...use the FM BAPI_DOCUMENT_CHECKOUTVIEW2 to download the files to the directory that sap is saving..Then use the class method CL_GUI_FRONTEND_SERVICES=>FILE_COPY to move the files to the directory you want..
    Thanks
    Naren

  • How to extract Title, Author and Document name from document(.doc;.rtf;..)

    Some files contain meta-data from which we can extract even more details.
    for example: .mp3 file format is:
    at end of file - 128 bytes
    offset type len name
    0 char 3 "TAG"
    3 char 30 title
    33 char 30 artist
    63 char 30 album
    93 char 4 year
    97 char 30 comments
    127 byte 1 genre
    For Documents, is it possible to get the Creator, Title and Name of the document from the file (*.doc, *.rtf, ...)

    > I'd love to but they don't make those particular css
    pages available to us
    > (which seems insane). To modify the css we have to
    extract it from their
    > page
    > apparently.
    If the page can grab the CSS, so can you. Look in the code.
    Find the link
    to the CSS file. Browse to that link. You now have the CSS
    file. Or show
    us the link's code and we'll get it for you.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Lvanhoff" <[email protected]> wrote in
    message
    news:gqijsu$dk3$[email protected]..
    > I'd love to but they don't make those particular css
    pages available to us
    > (which seems insane). To modify the css we have to
    extract it from their
    > page
    > apparently.
    >
    > So if there were some way to tell DW: "Show me all the
    styles used in this
    > html and put them in the style area of the document" it
    would make my life
    > EVER
    > so much easier! :-)
    >
    > Thanks
    >

  • Can't delete Library and Servers alias from Network

    Hi there,
    I did a dumb thing and now I can't cope with it's results.
    From time to time I do check whether there are wlan networks near the place I live. I just do it out of curiosity and not with the intention of any ill doings. I myself have cable broadband.
    Usually all those wlan connections are password protected but recently one wasn't. I checked if I can connect and browse the internet - and I could. Well, after a short while I cut the connection as my own internet access is way faster.
    But now the network entry in my finder is mounted and there are aliases for "Library" and "Servers". I think these are the aliases pointing to the computer/server I did connect to before. No problem I thought, but then realized that this is an issue.
    I can't delete them anymore or dismount the network folder. Whenever I want to delete those two aliases it says I can't bc I don't have the rights to do it. How I can get rid of those aliases? I guess the original host was a windows PC.
    Well, that will teach me not to hassle with other peoples wlan connection
    thanks
    iMac 5G Revision B   Mac OS X (10.4.8)  

    i'd like to know too

  • HT4759 How do I view the photos and documents saved from my computer on iCloud

    How do I view the documents and photos that are saved from my computer on iCloud?

    I have the question I saved my pictures and contacts and music from my iPhone 5

  • Oracle B2B not picking up Document type and document version from JMS msg

    Hi,
    We have developed guideline and schema for a custom positional flat file using Oracle B2B Document Editor. We were able to creat and deploy the agreement. But when we drop a message on a Queue being listened by Oracle B2B. The document type and version values were empty. We got the following error,
    Error Code B2B-50083
    Error Description Machine Info: (xxxxx) Description: Document protocol identification error.
    Error Level ERROR_LEVEL_COLLABORATION
    Error Severity ERROR
    Error Text Document protocol identification error.
    This is our Java code for testing that drops the message, and I can see the JMS header with these values.
    message.setText(messageText);
    message.setStringProperty("FROM_PARTY", "CT-Sender");
    //message.setStringProperty("FROM_PARTY", "RemoteTP");
    message.setStringProperty("TO_PARTY", "MyCompany");
    message.setStringProperty("DOCTYPE_NAMEe", "CT");
    message.setStringProperty("DOCTYPE_REVISION", "CT-AES");
    We were able to test a 850 document successful through different document and agreement ....
    Thanks
    John

    We have uploaded the ecs and xsd files. Are they the parser files you are mentioning? The following is the information we have for the transaction. I am just surprised whty the Document Type and others are empty.
    Thanks
    John
    Id 0A9F196E132459F393C00000184B4897
    Message Id 0A9F196E132459F392300000184B4893
    Refer To Message Refer To Message
    Sender Type Name
    Sender Value CT-Sender
    Receiver Type Name
    Receiver Value MyCompany
    Sender CT-Sender
    Receiver MyCompany
    Agreement Id
    Agreement
    Document Type
    Document Protocol
    Document Version
    Message Type REQ
    Direction INBOUND
    State MSG_ERROR
    Acknowledgement Mode NONE
    Response Mode ASYNC
    Send Time Stamp 09/07/2011 04:40 PM
    Receive Time Stamp 09/07/2011 04:40 PM
    Document Retry Interval(Channel) 0
    Document Remaining Retry(Channel) 0
    Document Retry Interval(Agreement)

Maybe you are looking for