Collaboration Server - changing the SMTP server info

We have installed the collab server. However the SMTP server info specified during the install, was incorrect. I need to change the SMTP server name. Is this configurable through any config file setting or do I need to re-install collab erver.
Any help on this would be appreciated.
Thanks.
Vanita

Vanita -
What version of Collab are you using? The SMTP notification settings are all accessible without re-installing. I am looking at a 3.0 Collab install and the settings are all in the plumtree\ptnotification\3.0\settings\config\config.xml file.
Hope this helps.
-- Jeff Chastain

Similar Messages

Can I change the smtp server with Yahoo push account?

My yahoo email account will send and receive over EDGE using the default yahoo mail settings. On my home Cox internet WiFi network I can retrieve messages but cannot send. When sending it says it was sent and makes the "swooshing" mail sent sound, but the message disappears. It does not appear in the "sent" folder or "drafts" folder either. No error message is returned.
I suspect this is related to Cox blocking the smtp server, but the iPhone does not allow me to change the smtp settings on the default yahoo account. Does anyone know how to do this? I can set it up manually for POP access, but then I'm flooded with spam.

No, you cannot change the SMTP server on the Yahoo push account.
Yahoo push only works if you configure your account using the Yahoo! Mail shortcut on the iPhone, and that shortcut does not allow for ANY customization.

Where(How to change the SMTP- Server

Hello,
i'm using the OAS 10.1.2.0.2
While installation OAS i entered the name of the actual working SMTP- Server.
Sending mails worked fine until today.
Now the name of the SMTP- Server has changed and i wanted to change it(the name) in the Application Server, but i didn't find one/all place(s) where i had to change the name(s) of the SMTP- Server.
Is there anyone who can help me??
Thanks a lot.
Best regards.
Florian

Refer this:
http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/reconfig.htm#sthref681
Thanks
Shail

HT4864 can I use the icloud smtp server as the outgoing server for all my other imap accounts?

I have several imap accounts. I want to send all my messages using the icloud server. I put the icloud server as the smtp server for each account but mail is not able to send the messages. The configuration is correct for the smtp iclous server, I checked.
Is there anything I'm missing?
Fausto

The only thing you're missing is that you can't do that. You have to use the correct smtp server for the mail accounts. Email providers generally don't like sending some other company's mail. If you want to send from the icloud servers, use your icloud account when composing.

HT2480 In the server domain; Do I use the smtp server OR the incoming mail server?

I am trying to verify my business mail on my iphone and I have several troubles thus I would like to ask for you help:
1) its a "webmail.ath.hcmr.gr" mail, so it is a "Microsoft Exchange" mail type? Correct?
2) in the server field: what do i add? The incoming mail server or the smtp server?
Thanks

Hey Butterworth,
You may need to use the information in this article to help you troubleshoot the issue with your outgoing server:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

How to change the smtp. element of the outbound mail server

When adding an existing email account it is not possible to change the 'smtp.' portion of the outbound mail server address.
My smtp server name is 'mailout.easymail.ca'
How can I set this?

It is NOT a prefix. It is a label. It indicates the type of server this particular setting will connect to.
Here are the relevant bits of two of my accounts settings.
account27: 
INCOMING: account27, , (imap) mail.tamba.co.uk:143, plain, passwordCleartext 
OUTGOING: mail.tamba.co.uk:25, plain, passwordCleartext, true 
 
account29: 
INCOMING: account29, , (imap) mail.btinternet.com:993, SSL, passwordCleartext 
OUTGOING: mail.btinternet.com:465, SSL, passwordCleartext, true 
No skulldduggery was required to get those ''mail'' "prefixes" in place. ;-)

I changed my password on my aol account but it did not change on the SMTP server which is preventing me from answering email. Help

I changed my aol password but the SMTP server password did not change so I can't send mail. How can I change the SMTP password?

Go into Settings > Mail, Contacts, Calendars and select the account, then tap the account on the popup that you should get, and then tap on the SMTP server name

Mail SMTP-server changing the port by itself!

Hi!
My mail app keeps changing the smtp port from 25 to 547! I dont know how i can fix this..! It happens even though i havent put my macbook pro to sleep, over intervals of a couple of hours. Ive assigned mail to use a custom port 25 because for some reason it doesnt use port 25 when assigned to "Use default ports"..
Any ideas of how to fix? Couldnt find any case like it on the interwebs.. :/
-Tormod

Hi!
I have my own domain, so port 25 works for that mailaccount, none of the others..

How to change the web server??

How to change the web server in the details of the mobile application component in the MI webconsole??

hello irene,
had your tried checking on the "Use IP instead of host
name" checkbox?
to edit your registered application info, go to
"Upload Mobile Component" tab and click on the Edit icon
on the left part of the record list which corresponds to
the application you had just uploaded.
your application is uploaded to the same host as your
web console application is running on. if you like to
point it to a different server where you have your
archive accessible, you have to change your mcd
deployment attributes on your middleware. try the ff:
1)run tcode: mi_mcd
2)click on Create Mobile Component
3)Enter Mobile Solution Name and Version
4)Click on Display MCD
5)Select Deployment Tab
6)Click on Edit
7)Change the values of WEBSERVER and WEBPATH location eg.
if your archive is located at
http://myotherserver:80/archive/myapplication.war
your entry will be:
WEBSERVER: http://myotherserver:80
WEBPATH: /archive/myapplication.war
where you myotherserver is the name of your http host
server and myapplication.war is the name of your archive.
the archive directory is just a virtual directory where
your application archive is.
you might need to change the port number depending on
your http server port.
regards
jo

I am not able to send mails through Yahoo APP.It gives me an error msg :"the sender address has ben rejected by the server ".I tried adding username and password in the SMTP server settings,But those optiopns are greyed out.

I am not able to send mails through Yahoo APP. It gives me an error msg :"the sender address has ben rejected by the server ".
I tried adding username and password in the SMTP server settings,But those optiopns are greyed out.
So, i am not able to enter anything in fields under SMTP server settings

You probably have changing settings disabled in Restrictions.

Where do you put the SMTP Server Name ?

I am trying to set up the email address of the SNMP.
i can set up the Server SNMP Agents and the trap destinations, but can't find where to specifiy the SMTP Server Name i.e our company email address name [email protected]
I looked in security realms can't find it.
Any ideas

Hi,
Here is sample setup for AIX machine.
SETUP:
GC agent installed in AGENT_ORACLE_HOME
RDBMS installed in RDBMS_ORACLE_HOME
Database and listener up and running, monitored by Grid Control,
this implies that the AGENT_ORACLE_HOME/sysman/emd/targets.xml contains the correct credentials for the database.
The listener name given ion RDBMS_ORACLE_HOME/network/admin/listener.ora is identical to the name of that listener target in Grid Control.
AGENT_ORACLE_HOME/network/admin/sqlnet.ora must exist.
SETUP steps needed for operating system AIX:
A. AIX is using its native snmp deamon pointing to the snmpdv3 deamon (this is the default on AIX5L):
[hostname]/root> ls -l /usr/sbin/snmpd
lrwxrwxrwx 1 root system 9 Jul 24 2009 /usr/sbin/snmpd@ -> snmpdv3ne*
B. The script AGENT_ORACLE_HOME/network/snmp/peer/start_peer has needs to be corrected on AIX :
1. the locations of "whoami" needs to be corrected from "/usr/ucb/whoami" to "/bin/whoami"
2. the command starting the os snmp deamon must be changed to
$SNMPD $SNMPD_OPTIONS -p $NEW_SNMPD_PORT >snmpd.out 2>&1 &
Alternatively add two blocks for operating system AIX:
elif [ "$uname" = "AIX" ] ; then
USERID=`/bin/whoami`
SNMPD=/usr/sbin/snmpd
SNMPD_CONFIG=/etc/snmpdv3.conf
SNMPD_OPTIONS=""
BP="AIX"
TRPCMD="exit 1"
ENCAP_OPT="-s 1160"
elif [ "$uname" = "AIX" ]
then
echo "Starting $SNMPD ..."
echo "$SNMPD $SNMPD_OPTIONS -p $NEW_SNMPD_PORT >snmpd.out 2>&1 &"
$SNMPD $SNMPD_OPTIONS -p $NEW_SNMPD_PORT >snmpd.out 2>&1 &
Starting up emsubagent
None of the following processes must be upp and running: snmpd, emsubagent, master_peer, encaps_peer
The following ports must not be allocated: snmp, smux, 161, 1161, 199
run as root:
ORACLE_HOME= <full path to the AGENT_ORACLE_HOME>
export ORACLE_HOME
$ORACLE_HOME/network/snmp/peer/start_peer -a
This must start the following processes as root: master_peer, encaps_peer, snmpd
As agent ORACLE_HOME owner run
AGENT_ORACLE_HOME/bin/emctl start subagent
The snmp_*.ora files needs to be copied from AGENT_ORACLE_HOME/network/admin to RDBMS_ORACLE_HOME/network/admin
Restart the listener, query the listener status
"RDBMS_ORACLE_HOME/bin/lsnrctl status <listener_name>" must show: SNMP ON
Regards,
Kal

TS3276 Hi there I am having trouble with my outlook express this is the first time it has happened it keeps telling me can't connect to the SMTP server and every password I have tried is incorrect this is for 'iCloud' very frustrating as all our phones ar

Hi there I am having trouble with my outlook express this is the first time it has happened it keeps telling me can't connect to the SMTP server and every password I have tried is incorrect this is for 'iCloud' very frustrating as all our phones are ok

Well I am feeling a bit silly now because that was all I had to do. In the past Workgroup Manager had always opened right up to the list of my users, I never even thought to click on that but apparently that was all that was needed.
I still am not sure how the iChat Server preferences changed themselves on me, but it is not the first time I have had weird "settings" issues with our Snow Leopard Server.
Thanks!

Cannot edit the smtp server list in Mail (Yosemite)

I am trying to edit the smtp server list in Mail. I am running Yosemite on my MacBook Pro and always get this message.
"The servers marked with alert icons are in conflict and cannot be saved. Two servers cannot share the same address and authentication settings. Resolve the conflicts and try again."
There are no alert icons displayed!!! And I can not delete a server.
I need to change some smtp-settings and cannot edit anything.
Any ideas?

Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData/Accounts.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Desktop, leaving the window open. Relaunch the application and try to recreate the account settings. If there's no change, quit again and put the item you moved back where it was, overwriting the one that may have been created in its place. Otherwise, delete the item you moved.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Pragmatically change the DNS server

I have been trying to figure out how to write a program to change the DNS server, like you can in the control panel. I have played with Resolv.conf and a whole bunch of low level APIs.
From the terminal window, things like nslookup work (use the right dns server) but Safari doesn't. It still is using the original DNS server. I can stop and start safari and go to web pages it has not visited before and it still uses the old DNS server, so its not just pulling up cached pages.
It seems the low-level API stuff doesn't work for higher level applications like Safari (its the only high level app I know of that uses DNS to test with).
What is the API to use to change the DNS server address such that everyone,, like safari, will use the new DNS address?

Yeah, but I am changing all the DHCP entries in the system and it still gets out. However, it is solved by updating the system config. I was just curious as to where it got its DHCP server info from when the system config was blank and resolv.conf was set to my DHCP server.

How do i create a mail box in the SMTP server thru a java program

How do i create a mail box in the SMTP server thru a java program. If it is possible thru a java program.pls suggest a mail server compatible for the above possibility to work.
pls help ....

Please let me know if it is not at all possible to
create a user account automatically thru a program
(java) in a mail server... how does yahoo work
then..does he manually add a user to the mail
server...By talking to a web server not a mail server.
>
Is not there any mail server that will allow us to
create mailboxes for my java program.. how do the
other web account services work..
As I said mail servers do have management interfaces. You need to find one and then determine what the management interface is.

Collaboration Server - changing the SMTP server info

Similar Messages

Maybe you are looking for