Collapse Infocube

When attempting to collapse an infocube, I got the following:
System error: RSCDS_BUILD_STORED_PROC CONSTRUCT_METADATA READ TABLE
Message no. DBMAN100
Diagnosis
A system error with the following parameters has occurred in the data manager:
Parameter 1 = RSCDS_BUILD_STORED_PROC
Parameter 2 = CONSTRUCT_METADATA
Parameter 3 = READ TABLE
Parameter 4 =
I saw the other message dated March 2007 where having a time dimension solved the problem. I have a time dimension but there aren't any attributes associated with it.
We're currently on Oracle 10g, SAP 7.0 SPU12.
Suggestions?
Thanks!
Debby

Hello Debby,
I am not sure about the error you are getting. But still a suggestion check the cube in RSRV. Carry out the analysis of the cube for any errors.
hope this helps.
regards,
Lax

Similar Messages

Compression(Collapse) of the Infocube

After partial completion of Realignment process (approximately 20,000 CVCs) for the Planning Object Structure and Infocube, we are unsuccessfull to Compress the Infocube. There were around 20000+ requests were generated during realignment process in the Infocube.
We Realigned both Planning Object Structure & Infocube at a time.
As part of master and transaction data daily loads, we follow some steps to this infocube;
1) Delete Index ....... Delta
2) DTP ...... Delta
3) Create Index
4) Create Statistics
5) Compress/Collapse .... Delta
The job getting failed when it reaches to the "Compress/Collapse of Infocube".
I appreciate all suggestions......

What does the job log say?Any errors?
I think this is more a BI post and get better answers if you post there.

How to delete a request in a collapsed and aggregated infocube ???

Hi all,
The situation :
I have a cube that is collapsed, and that has aggregates.
I'm not the one that designed this cube but if my understanding is good, aggregates were created to avoid the duplication of the recordings for the same key of characteristics because of the multiple loading. Actually KFs of the same recording are fed by various chains. Each chain creates a segment for the same characteristic values while updating the concerned KF. The aggregates make it possible to gather all these segments within the same recording by aligning the various updated KF. (that's definitelly not clear to me but...this might be the reason why...)
In the last chain that feeds the cube, right after loading datas, there is an "adjust" step, and then a "collapse" step.
The problem :
Sometimes for this cube (when we have a problem with figuresfor example) I have to run loading chains a second time for the same day. The result of that is obviously that datas are doubled in the cube, so that I have to delete requests in the cube to have them right.
The problem is that, when I try to delete a request, the following pop up message appears : "Request ID xxx is aggregated, compressed or scheduled
Message no. RSM725"
I think I have to "uncollapse" the cube to do that, but I don't know how to do. By the way I'd want to "recollapse" the cube after that (it seems it's necessary so...).
Could someone explain steps to solve the problem, and in the same time, explain the necessity and differencies of creating aggregates and collapsing please ????
That would be so usefull to me, obviously I assign points for helpfull answers !
Thanks !
Fabrice

Aggregates
check this links for aggregates
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e55aaca6-0301-0010-928e-af44060bda32
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cbd2d390-0201-0010-8eab-a8a9269a23c2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2299d290-0201-0010-1a8e-880c6d3d0ade
How to doc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e55aaca6-0301-0010-928e-af44060bda32
relation between agg and comp
Relation between Rollup and compression.
Aggregate Rollup and Compression

Collapsed request in infocube-How to get delta back

Hi All
I am loading the data from one ODS to cube1,cube2 and ODS1.
this is the delta update.
there is a load failure today.the load failure is due to the SID values missing for for one characteristic.
the requests in cube1,cube2 and in ODS1 are red.
but i the morning somebody made the red request in cube one in manage tab green and collapsed the same.
Actually i wanted to repeat the delta by deleting the requests in 2 cubes and ods.
But now the request in cube 1 is already collapsed what can i do now to get the last delta.
can anybody pls suggest.
urgent plsss....
Thanks in advance
S VR

Yes you are correct SVR,
We can not delete request once it is compressed. Selective deletion is not usefull in this case.
You can try following -- Be careful -- follow steps -- first try in Dev
If you know last requests generated todays delta in base/source ODS and those requests are available in PSA for reconstruction.... then...
1. Delete initialization from this source ODS to all 3 targets.
2. If requests are available for reconstruction, delete required requests from ODS.
3. Now initialize without data transfer from ODS to 3 targets(2cubes + 1ods).
4. Reconstruct deleted requests in Source ODS(it generated delta)
5. Pust delta to 3 targets.
Hope it helps
Srini

Error during Compression of an InfoCube (ORA-01438)

Hi all,
I am getting an error while trying to compress a request on an infocube,
I have attached the logs from the compression;
START cond CUBE BADR_C01 at 105833 on 20080606 maxreqid      2740 maxcnsid         0 refpoint update + NO NULL ELIM
The primary index on the E table was deleted
System error: ORA-01438: value larger than specified precision a
System error: llows for this column
System error: CONDENSE_FACTTABLE-5- ERROR:1438-
Collapse terminated: Data target BADR_C01, from to                                              2740
I have searched the SDN and OSS Notes for the ORA-1438 error but cannot find anything helpful.
Has anyone else come across this during a compression.
By the way, the compression on another cube works okay, just seems to be this cube and it is the first request I am trying to compress on this cube.
We are on BW 3.5 with an Oracle DB release 9.2.0.7.0.
Points awarded for any helpful or successful answers,
Thanks,
Shane.

Hi Viki and Shambhu,
thanks for your quick replies.
Viki, on our TableSpaces we have the following percentage used, do you know what to check?
Table Space         Percentage Used
PSAPBBP          82
PSAPBBP640     69
PSAPBBPUSR   15
PSAPTEMP        0
PSAPUNDO        60
SYSTEM             78
Shambhu, I have looked at the e table in SE11 and there is the following indexes ;
Index using Dimension BADR_C01P
Index using Dimension BADR_C01T
Index using Dimension BADR_C01U
Index using Dimension BADR_C011
Index using Dimension BADR_C012
Index using Dimension BADR_C013
Index using Dimension BADR_C014
Index using Dimension BADR_C015
Index using Dimension BADR_C016
Index using Dimension BADR_C017
Index using Dimension BADR_C018
Index using Dimension BADR_C019
Index using Dimension BADR_C01A
Index using Dimension BADR_C01B
Index using Dimension BADR_C01C
Non-Unique Index (Key Fields) for Table /BIC/EBADR
Is there anything else to check here???
Thanks for your help,
Shane.

Data comparision in 2 infocubes in 2 different systems

Hello all,
We have 2 3.0B BW systems. In both systems, there is a infocube called IC1.
Now my requirement is, i have to compare the number of records, in both the cubes in 2 different BW systems. In the first BW system, we are compression/collapse the infocube every week.
If i compare the the fact table, in the Manage-->Content tabstrip for the no of records, is it a accurate way to compare the no of records? or if there any other standard way could you please let me know?
Many Thanks,
Ravi

Hi Ravi,
try rsa1->infocube->manage->requests. See the column inserted records. But before, set the from date for the request display to a very early date.
regards
Siggi

Roll up and Aggreagaes and Compression on transactional Infocubes

Hi Frineds,
I want to know about like whether Roll up and Compression is possible or not on Transactional Infocubes?
Please confirm the correct one.
I know this is very basic one but i want exact answer.
Will assign the points.
Thanks in advance.
Regards
SAPSEM

Hi,
of course u can build aggregates, can do compression on transactional info cubes because transactional info cube is also a basic cube with planning allowed.
as we can do loading for transactional cube we can build indices, we can maintain aggregates do compression to improve query performance.
go into manage of the transactional cube u can find everything same as basic cube.
same performance tab,same rollup tab, same collapse tab.
assign points if it helps.
thanks,
pavan.

Need useful links to learn abt the tabs present in Infocube manage option

Hi all ,
I am a beginer in BW .. can u please send me some use ful links to gain knowledge about the various tabs present in the Infocube manage option .( Performance , Rollup , Collapse , Reconstuction )
Help done will be defaitely appreciated ....
Regards ,
Santosh ...

Hi Santhosh,
Check this help.sap link. It will give a clear picture of all the Manage data target functions
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6466e07211d2acb80000e829fbfe/content.htm
Assigning points is the way of saying thanks in SDN.
REgards,
R.Ravi

Balanced Scorecard overview screen-trees to be displayed in collapse mode

When the user logs into Balanced Scorecard overview screen all the trees are displayed in expanded mode, need to display the trees in collapse mode by default. i.e Only nodes visible should be top level hierarchy nodes. The user should be able to decide which nodes he wants to expand.

Hi RP,
1. 0SEM_C02 can typically be used to store all the initiatives. Please note that initiatives can be linked to Project Systems in SAP R/3 and the project data can be automatically brought over to initiatives. Now it may happen that not all of those initiatives may be dependent on scorecards and there can be scorecard independent initiatives. The business content cube that you mentioned can be used to store and report on such inititives and their links to scorecards if any.
2. What infoobjects to have in the scorecard cube depends upon your requirements and there is not a good or bad choice here. If you choose 0SEM_POSIT as one of the infoobjects, then you can easily access all the measures.
3. The data read from BW or buffer also depends upon your performance requirements. If your situation is such that you must report the latest data in BW all the time, then reading from buffer only will not serve your purpose because the data will be read only from the buffer and not from the cube. In that case, you may have to fill the buffer often to keep the buffer data up to date. If you select read from Bw only, then it will bypass your buffer and for every small request, it will access the infocube(s). This may be performace drag depending upon the size of the data, performance of the related queries etc. If you choose read from buffer/BW with latest time stamp, then it will access BW only if latest data resides there. This may not be a good option if the performace is a prime concern. Ofcourse if you are using BIA, then you can safely read from BW.
Regards
Pravin

Compression Job running too long for infocube 0IC_C03

Hello All,
I have loaded around 50 thousand records ( For two different Plants ) to infocube 0IC_C03 from BX , BF and UM .
I have compressed successfully BX request by removing the check mark for No market Update.
After that I started the Compression for the Request of BF by checking the NO Marker Update checkmark.
This job is running from last 8 hours .
System performance is Ok and there are no uploads going on.
The compression job is still active.
I tried to kill the job by taking the PID and from T code SM 50 but still I can see active job in SM37.
In Infocube also I can see the Running Compression job .
I could not understand why it is taking so much time to compress the BF data request even though there are very few records.
The BX compression completed within 5 minutes.
But why it is taking too much time for compression BF request ?
How to stop such a request which is active even after I kill the PID from SM50
Regards ,
Amol
Edited by: Amol Kulkarni on Apr 24, 2008 9:18 AM

I resolve this issue in this way ,
I noticed that in SM37 job is active even after killing it from SM50.
I wne to infocube Manage ...Collapse tab and then refresh it. So immdiately the job dissapers from Request Tab and when went to SM37 it become cancelled.

Process chain failed at COLLAPSE PROCESS TYPE ?

HI all ,
we have one process chain , in that we have used oe process type collapse for the cube .
it got failed , but in the manage screen , under request status , it is showing tick mark i.e collapse successfully .
give me some solution..
regards ,
Srinivas .

Hi Venkatesh,
thank you, i have resolved this issue.
i have checked in SM12 and there is no lock on the particular info cube then i repeated the process.
the process chain failed at the stage of rolling up infocubes and the next triggred process was successfull even though i repeated the process chain.
my concern is how the next process triggrred and it was successful when rollup process failed.
can you please explain me
thanks

Collapsed view: how to see "most recent unread message" instead of "first unread message" in a thread in Mail

Hey all,
I use the inbuilt Mail-software on my Macbook with Lion 10.7 and I constantly overlook new messages in a thread, as I organize by conversation and usually have all my threads in 'collapsed view'. For some reason Mail seems to prefer showing the 'first', i.e. the earliest unread message as the one message that I see in collapsed. If there are newer messages already in the thread, I don't see them, unless I un-collapse the thread. I find this really unintuitive and annoying, my inbox seems far more static than it really is.
Is there any way to change this and have Mail show me the most recent unread message as the message I see in collapsed view?
I appreciate any advice.
Thanks, Carl
PS: BTW, I have the same problem on my iPhone, double props to you if you can solve it for both Mail and iPhone!

Mail
Preferences
Viewing
Check put most recent message at top

Possible to Have ToC Default to Show Only Top Level (collapse sublevels)?

Howdy!
I'll bet I'm not the only one wishing for this. Let's say you're using Captivate 4's Table of Contents feature with a longish movie of Cp slides, which is chunked into bite-size sections content-wise. In the ToC, though, you can't mimic that same organization scheme; at least, the learner would first need to collapse all the ToC folders you've created so they see only the top-level listing.
This can be a critical issue: keeping the at-first-glance list in the ToC brief enough to be inviting to learners, yet allowing learners to drive which details are currently visible.
A movie's topical hierarchy could be along these lines, for example ...
Section 1 - National Brands
What are National Brands?
Why Are They Important to Our Business?
Working with Nat. Brands
Practice Your Knowledge
Section 2 - International Brands
What are International Brands?
Why Are They Important to Our Business?
Working with Intl. Brands
Practice Your Knowledge
You'd like to organize the ToC to show only the section titles (1st level) and to suppress the 2nd-level detail (slide titles) until the learner chooses to expand the folder to see those details.
I've tried things like grouping the slides into sections in the Storyboard view and organizing the slides into sections strictly within the ToC -- both to no avail.
Has anyone solved for this need yet?
I'm all ears, and you'd be doing learners of the world a huge favor.
Thanks!

Hi, Jim.
Thanks for being 'on the case' and looking into this so quickly. Your
findings are encouraging, although my user base is generally working with
IE 6 and FP8 or 9.
Since the only thing I may influence is getting IT to help push out FP10,
I'm hoping it's more of a player- than a browser-version issue.
I'll test things out by Monday and let you know the results. Wish me luck!
Dave
 From: Jim Leichliter <[email protected]>
To: Dave Tressler <[email protected]>
Date: 03/26/2010 06:02 PM
Subject: Possible to Have ToC Default to Show Only Top Level (collapse
 sublevels)?
Dave,
I just tested this on my local web server and it worked fine. I created a
blank project with 8 slides. Created my TOC with grouping... 2 slides in
each group. I turned on self paced learning. I tried with and without the
widget and it picked up where I left off in either case. See
https://docs.google.com/leaf?id=0B86WuEq6SVwRNWIwMjhjODctMjE2Yy00MWE2LWI5YzEtMGQxYzNjOWQ0Z mI2&hl=en.
I published using FP10 and IE8 to view. Notice any difference between
your project and this one?
Thanks,
Jim Leichliter

Error while activating Infocube

Following error while activating after creating new Infocube:
No active nametab exists for /BIC/DDPCW14DFD1
Termination due to inconsistencies
Table /BIC/DDPCW14DFD1 (Statements could not be generated)
Enhancement category for table missing
The cube is being made as a exact copy of an existing activated and correctly working cube.
Can anyone shed some light on this?
======================================
MORE detailed error:
RED- Error
GREEN-Fine
YELLOW-Warning
RED     Error/warning in dict. activator, detailed log --> Detail
GREEN     Activate table /BIC/DDPCW14DFD1
YELLO     Enhancement category for table missing
YELLO     Enhancement category for include or subtype missing
GREEN     A table called /BIC/DDPCW14DFD1 exists in the database
RED     No active nametab exists for /BIC/DDPCW14DFD1
RED     Termination due to inconsistencies
RED     Table /BIC/DDPCW14DFD1 (Statements could not be generated)
GREEN     Error number in DD_DECIDE (9)
YELLO     Flag: 'Incorrect enhancement category' could not be updated
GREEN     Table /BIC/DDPCW14DFD1 was not activated
GREEN     Activate table /BIC/DDPCW14DFD2
YELLO     Enhancement category for table missing
YELLO     Enhancement category for include or subtype missing
GREEN     Table /BIC/DDPCW14DFD2 must be created in the database
=============
Thanks,
Mohnish

Can i know in which environment are you working? BW 3.5 OR BI 7?

ERROR WHILE UPDATING TO INFOCUBE

Hi All,
I am using a flat file to load data from datasource into infocubes.The data reaches PSA tables with no errors but after the execution of DTP , the monitors shows up Error Updating to infocube, intitally I thought there could be some problem in the data format of certain fields in the flat file but everything looks to be correct, there are no errors in the transformation rules.
Here's the ST22 analysis :
what happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Termination occurred in the ABAP program "CL_RSAWBN_NAV_TRACE===========CP" -
in "DUMP".
The main program was "RSAWBN_START ".
In the source code you have the termination point in line 42
of the (Include) program "CL_RSAWBN_NAV_TRACE===========CM004".
I have been deleting requests from the infocube , datasources and deleting entries from PSA but always endup getting the "Error while updating to Infocube"
Have to figure out the solution as the planning team is waiting for me to copy the actual data to the plan cube
Thanks

Hi,
You should have the following format in the flatfile :
Considering today's date(18 Apr 2008) for example:
0CALDAY            20080418
0CALMONTH       200804
0FISCPER           0042008
0FISCPER3         0042008 (I think this can have additional periods as well, not sure though)
0FISCVARNT       No idea about this.
Reward with points if helpful.
Regards
Hemant Khemani

Collapse Infocube

Similar Messages

Maybe you are looking for