"Colleagues" and "In common with you" webparts do not show any userpics anymore
Hi,
I use the Colleagues and the in common with you webpart on our mysite and today I realised that these two webparts show only the usernames, but do not show any userpics anymore.
Is this configuration or what might be the reason?
Thanks
Sven
Hi,
the web part In Common with you when added on my site is not working for me at all. On sharepoint2013.
Can you help me with the steps to get it work
Similar Messages
-
I have a ipod classic 160GB and it's not showing any music anymore, but there is still showing 7GB of memory being used, and I don't have it backed up on my itunes, since I had to put a new hard drive on my computer. Any suggestion to find out whats on that memory or to get it the music back, there is approximately over 1400 songs on it?
What is the memory being used by, is it Other? If it is, that means the iPod can no longer read the music, so it has put it all in "Other".
The usual fix for this is to allow the iPod to Sync with its iTunes Library. If that doesn't work, the next option is to Restore the iPod using the Restore command in iTunes, on the Device/Summary pane.
Unless you are very (very) lucky, I suspect that you are going to have to Restore your iPod. Restoring will remove everything form the iPod and put back onto it only what it finds in your iTunes Library, which you say is currently empty.
If you have to rebuild your Library after this issue, by adding all the music back again, this is going to be hard to hear, but for the future, you may want to consider always having a backup of your library. The easiset way to back the Library up is;
if the Library is small enough, burn it to a DVD, as digital files, not a "music CD".
If your Library is too large for a DVD, buy yourself an external hard drive and copy the Library onto the drive. Remember to update the backup every so often. -
Server 2008R2 with AD DNS Panel not showing any records only shows the zone name
Hi All new to the Form. We have had this new domain controller running dns for a few years now and recently I went to edit some DNS records and found them missing in the DNS console the zone names are there but nothing is under the zones just one record
for the server under our AD domain. If i do a nslookup to this server it still displays the records as it should. It is also setup to forward the zones to a secondary server which is only pulling info from this Master 2008R2 server. Any ideas where i can try
and recover the records for my Zones.
ThanksHi,
According to your description, there are several possible reasons resulting in the DNS records disappearing.
1. If the aging and scavenging was configured in the DNS server, scavenging can cause records to disappear. Even Windows-based computers that have statically assigned servers register their records every 24 hours. Verify if the
No-refresh and Refresh intervals are too low. For example, if these values are both less than 24 hours, then we will lose DNS records. To view the settings, right-click the zone in the DC, click
Properties, click Aging.
2. Is there a DHCP server in your environment? DNS Dynamic Update Protocol updates to existing records fail can also cause them to be deleted by the scavenging process as aged records.
Also, event logs are helpful to isolating the issues. Is there any event logs in your computer?
For more details about DNS records disappearing, please refer to the link below,
DNS Records Disappearing and DNS Auditing
http://msmvps.com/blogs/acefekay/archive/2010/12/09/dns-records-disappearing-and-dns-auditing.aspx
Using AD Recycle Bin to restore deleted DNS zones and their contents in Windows Server 2008 R2
http://blogs.technet.com/b/askds/archive/2010/08/12/using-ad-recycle-bin-to-restore-deleted-dns-zones-and-their-contents-in-windows-server-2008-r2.aspx
Best Regards,
Tina -
Hi there. A common question but I can not get any of our iphone/touch/pad to be recognised as a device on itunes on a PC with XP. ANy quick solutions?
jrburrows wrote:
Ok, fair enough. But since Job's death - Apple's control on leaks has been terrible. I got the new iPhone, and I like it - but it hasn't made nearly as big as an impression as previous ones. Because of the vast ammount of leaks. With the iPad mini leaks, it's 99% sure to come out next week.
Apple uses many manufacturers and it's massive also websites prefer to report on Apple whether true or false because it brings more hits.
Amd by "others" I meant other people on iPads - not other devices/manufacturers. It's possible to do so, I just want to know how. I honestly don't think we'll ever be in a Post-PC era until all tablets allow us to use USB in the way computers do.
No, USB is not the future, you missed the memo about cloud and wireless computing? -
How do i update 10.5.8 if my macbook does not show any software updates?
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading from Snow Leopard to Lion or Mountain Lion to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mavericks
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content. Any Suggestions?
You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.
-
I have a 1TB WD external hard disk, which suddenly cannot be detected in my system. When i connect the hardisk to the macbook, the disk appears and immediately disconnects with the message "Disk not properly ejected". Any advice ?
verify on another Mac if the same
WD is having issues with mavericks as you can see on the WD forum, did you install any WD software (never do that) when you connected the drive for the first time?
possible issue is a dead SATA bridge card or the new WD firmware w/ Mavericks.
SATA card issue
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
http://community.wd.com/t5/External-Drives-for-Mac/bd-p/passport_mac
verify on another Mac if all possible -
My imac is not recognizing any external dvd writer drive. I have imac with Core i7 and Mac OS 10.6.8. I have tried external dvd writers from Samsung and Amazon Essentials but the computer does not recognize any of them. Which Dvd writer is compatible?
I have an external firewire burner; it never shows on the desktop unless I insert a CD or DVD - that icon will then show (if I have my preferences set to show those on the desktop). Hae you checked in Disk Utility (Applications > Utilities) to see if it is listed under drives?
-
Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined settings to run the cd's and dvd's ?
A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive. -
am editing with red files in premier pro and when I export and then upload to youtube it is not showing as an hd video. can anyone help?
Then it's probably YouTube - have you checked here to see that you're watching the hi res version? It could be that YouTube is choosing an easier version to display based on your internet connection.
You can see on this screenshot that although the video has up to 1080 specs, my connection is making YouTube show me the 360p version by default. -
I have an IPod touch 4.2 and the game center is not showing any of the games. My Ipad1 and IPhone are running from the same account and both work great. Any suggestions how I might solve this? Thank u
I would just explain that this just started happening, that nothing has changed on the phone, that it is an original iPhone and I wondered if they are implementing a change in coverage with their Edge network in my area.
If you restore your phone, you will be given an option to back up your phone at the beginning of the process (see step 6 here: http://support.apple.com/kb/HT1414). You will be given the option to restore to that backup at the end of the restore process. Your messages are stored in the backup so restoring to the backup will return the messages to your phone. Be sure to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts somewhere before restoring your phone as these sometimesget lost in the restore process. -
I had a live chat with an adobe person to help me to download again my Creative Suite 2 Premium, which I did, and now my serial number seems to not be any good. Why, what do I do now?
CS2 (and earlier) Activation Server replacement software
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
When you install the special version of PPro2 on a Win7 or Win8 computer, you MAY need to right click the program icon and select WinXP compatibility from the option popup -
I have got an ipad 2 .It is not showing any home screen but showing a symbol of connecting USB with itunes.I have downloaded itunes on my pc and it shows sync with ipad.How di I get my home screen.Pl help
Follow the prompts for setting up your iPad with iTunes on your PC.
Which Windoze version is your PC running? -
When I start iTunes, how do I get rid of the message "To use this machine for downloads, enter you Apple ID and password" which I now see twice since I downloaded the latest version of iTunes. Once is enough and no checkbox exists to say "do not show this message....."
Does this apply?
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support -
i m new t o iphone community , i tried to connect with itunes with my laptop, finally i did transfer my songs and movies to itunes but it is not showing in my iphone . plwease help me
You need to sync your phone with iTunes on your PC. Read this article
http://www.apple.com/uk/support/iphone/syncing/
Maybe you are looking for
-
How to count number of autoextents that had took place between a period.
urgent question Hi all how to provide me a report for getting the result of the Disk Drive Space usage (drive letter) that shows how quickly the space is being used up by the database(dbf files). Or how to count the number of autoextents that had too
-
Mac mini and optical output problems
I have just purchased a new Apple Mac Mini connected it to my Tv via HDMI and now am having problems getting the sound working. I have connected via optical output and the cable itself works and I can see red lights at either end. When plugged into t
-
Please help with update for ios 8.1.3
Some one PLEASE HELP ME!!! I just updated my I phone 4s to ios 8.1.3 it was taking a long time then they finally updated and had the Hello screen after that I saw my photos then they would just delete it right in front of me I also lost some of my c
-
What is a c-tree error #230 ???????????????
Last week I was in the process of making a PDF, out of nowhere I get "unexpected internal c-tree(R) error #230 (uerr_cod=0)" What does this error code even relate to? Since that error, I can make a PDF but I can't view it...this error comes up and fr
-
Messages are being deleted automatically
We have been using TB successfully on Windows 7 for a couple of years having previously used Outlook. My wife's incoming e-mail messages are being deleted after one month. They are also deleted from Webmail. The ISP says that they have not been delet