Collect chats into a single window not working

At least I thought it wasn't working. I would start a new chat and I would not see the tabbed UI.
It turns out the single window with tabs only shows up with 2 or more chats.
It wasn't obvious at first but it makes sense now.

iChat > Preferences > Messages section.
There is a check box.
9:02 PM Thursday; November 1, 2007

Similar Messages

Why while in Bridge Load Files into photoshop Layers does not work?

In Bridge, Tools>Photoshop>Load Files into Photoshop Layers does not work. I have two images selected and when I execute that comman in Bridge nothing happens. I exited and restarted both PS and Bridge and still nothing. I am working in Windows 7 and Photoshop cs6.

No I tried File/scripts/load file into stack and still did not work.
There was an update to bridge and now it works. Thanks so much.

On certain sites (like chats), the shift symbols are not working correctly.

On certain sites (like chats), the shift symbols are not working correctly, but shift+letters works fine. I've tried changing the set keyboard language, as well as the character encoding, but nothing works. I don't have this problem in IE.

Hello there.
Although possibly not related to your problem, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
As for your issue, I'm not sure if this is the case, but there is a little know keyboard shortcut to change the keyboard language on Windows. And it's very annoying, since it's easily triggered. I don't know exactly which one it is, but I think it's CTRL+SHIFT, the ones on the right. I suggest you ask Microsoft for support on this one. Firefox doesn't control keyboard languages.

Importing element definition from an EDD into a template - does not work

FM 10.0.1 German on Windows XP SP3.
When importing the element definitions from an existing EDD into an existing template, FrameMaker converts the template into a new EDD.
So the element definitions which are correctly defined do not appear in the template.
The highest level element is than ElementCatalog in the template and not the higherst lvel element defined in the EDD.
In FM9 this was no issue.
Any help is appreciated, I have a deadline and must do some changes in the EDD.
Best Regards
Thomas

Lynne,
EDD is english (Version FM7.0), Interface language is German.
Maybe it´s a localization issue.
I have attached a captivate demo pdf so you can see what happens and the
defective EDD.
Mit freundlichen Grüßen
Best Regards
Thomas Zeisig
From:   Lynne Price <[email protected]>
To:     "Th. Zeisig" <[email protected]>
Date:   13.10.2011 14:12
Subject:        Importing element definition from
an EDD into a template - does not work
Re: Importing element definition from an EDD into a template - does not
work
created by Lynne Price in FrameMaker Structured - View the full discussion
Thomas,
No question the behavior you describe is a bug. However, I am unable to
duplicate it. I created an EDD with two element definitions:
Element (Container): doc
Valid as the highest-level element.
General rule: (
When I imported element definitions from this EDD into a new portrait
document, FM reports that element a is referenced but not defined and that
b is defined but not referenced. However, with all elements listed, the
element catalog shows a, b, and doc. The metatemplate elements are not
available.
I wonder if this is a language-dependent problem. Is your EDD German or
English? What about your user interface?
Can you send me a short EDD that fails as you've described?
Thanks,
      --Lynne
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3969067#3969067]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3969067#3969067]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in FrameMaker Structured by email or at Adobe
Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

"IM for nokia - chat on the go" is not working sin...

"IM for nokia - chat on the go" is not working since two months, it always says "service temporarily unavailable", please rectify this, and also the update for the same from ovi store fails always.
Why is Nokia behaving like this??

cjlim wrote:
It is probably no harm checking with your service provider to see if it is a network restriction.
@cjilim:
Servce provider text me to setup all needed access points, just save the text & it done my internet setting. Perhaps they are undergoing upgrading process & missout some settings for me in previous, well it works now.
Thanks for your help.
If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

New Browser Window not working on My Mac Intel pro

I have set a behavior in Dreamweaver CS3 to open a new
browser window to a set size and to only show scroll bars if
needed. I have left all other attributes unchecked. This is not
working for me. Can you tell me how to make a new browser window to
my settings using the behaviors in Dreamweaver CS3? I do all the
steps right. what do I do when I follow all the steps for setting
up a new browser window correctly and it doesn't work!? The new
browser window never pops up even when i use an image map. The
Behavior is not working correctly and I even re-installed
Dreamweaver CS3. I am on an intel based mac pro. Running Firefox
version 3 and Safari 3.1.2 on Leopard. I have done this several
times before and it has worked. but that was before Leopard. Here
is my code:
<area shape="rect" coords="4,3,78,77" href="#"
onClick="MM_openBrWindow('images/02.jpg','','width=378,height=504')">
The only way I can get it to halfway work is add it into the
link area
on the properties panel. The window will then open but not to
the
specified size.?
please advise as this is taking a long time to figure out!?

Schafer Design wrote:
> Yes site is live! However I have been able to figure out
how to make them pop
> up with the picture in the new window but now it will
not fit to the size of
> the picture? I think it is time to take it live so I can
see how it acts on the
> server. the site is
http://www.davidmyersdesign.com.
Also having a rollover
> problem on the portfolio and contact page.
> Dreamweaver is not so dreamy to me right now!
>
This is an unusual way to go about doing this. Typically you
simply put
the thumbnails up on the page rather than combining them into
a collage
and then adding imagemaps to that.
Nevertheless, it can be done.
You have code like this:
<area shape="rect" coords="0,0,80,80" href="images/12.jpg"
target="_blank"
onClick="MM_openBrWindow('images/12.jpg','','width=378,height=504')">
Try adding
;return false
to each like this:
<area shape="rect" coords="0,0,80,80" href="images/12.jpg"
target="_blank"
onClick="MM_openBrWindow('images/12.jpg','','width=378,height=504');return
false">
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia

"SELECT SINGLE" is not working.

Hi all,
here i have one report. And in this i want just one row when my input material number match with my table material number this time if movement type is 131 then program will be terminated otherwise it's working but this coding is not working properly so can you please help me out.
My code is below .
data : matnr1 LIKE mseg-matnr,
       bwart1 LIKE mseg-bwart.
loop at mseg.
    SELECT SINGLE matnr bwart from mseg into (matnr1,bwart1) where matnr = matnr.
endloop.
if bwart1 = '131'.
            MESSAGE 'DATA NOT FOUND FOR THIS SELECTION1' type 'I'.
            SUBMIT ZPP_DAYWISE_MY_OWN VIA SELECTION-SCREEN AND RETURN .
            LEAVE PROGRAM.
   endif.
   CLEAR matnr1.
   CLEAR bwart1.

there should be all key fields in where condition of SELECT SINGLE
here in select which matnr you are passing? selection screen of mseg-matnr?
loop at mseg.
SELECTmatnr bwart from mseg upto 1 rows into (matnr1,bwart1) where matnr = matnr. endselect.
endloop.
if bwart1 = '131'.
MESSAGE 'DATA NOT FOUND FOR THIS SELECTION1' type 'I'.
SUBMIT ZPP_DAYWISE_MY_OWN VIA SELECTION-SCREEN AND RETURN .
LEAVE PROGRAM.
CLEAR matnr1.
CLEAR bwart1.
endif.
Edited by: Sachin Bidkar on Feb 23, 2010 7:12 AM

Preview Window Not Working

Problem:
The preview window in the top right of iMovie 08 does not work. It is either checkered or black.
Possible Solution:
If your iMovie project is using video from an event that has a lot of video in it, split that event up. Do this via right click->Split Event Before Click.
Background:
When I would start up iMovie '08 (7.1.4) everything worked fine until I clicked on a certain project that I had made. Then the preview window would not work--it showed a blank screen or was checkered, even though the audio would play. Weird things would continue to happen, and none of the other projects would play in the preview window, it seemed to get progressively worse.
The project used video from an even that had a lot more video in it than other events I was using. It had 45:45 and the others less than 30min. I split the event up half way via right-clicking about half way and then selecting "Split Event Before Clip". This split the event into two events, and everything works fine now. (When you split the event, you need not worry about messing up your project, it knows that you have split the event and can still find the video.)

Well, I just seemed to have solved the problem...at least as I was experiencing it. As mentioned, I have my Motion content on an external drive, so I decided to revisit this.
I had installed all my Final Cut Studio content on the external drive using the "Content Installer" (after first installing the apps to my laptop). When opening Motion for the first time, it couldn't find the content so I manually typed in the appropriate path...or so I thought:
250GB Drive : Final Cut Studio Content : Motion Content.
Oddly enough, a few things worked this way, but not everything. It turns out I had to specifically point one folder deeper:
250GB Drive : Final Cut Studio Content : Motion Content : Motion
After doing this, all my content seems to preview, although there still are a few anomalies. Some things have to be clicked on more than once to preview, or sometimes I must preview something else first, then try the desired effect a second time. In some cases waiting quite a while produces something.
I'll try moving the cursor about as Mabou suggested and see if that makes any difference.
At least I'm getting somewhere!
Thanks,
Doug

SQL Query Single Row not working

My workflow contain a Query Single row activity. I have added a where clause in Arabic which is not working. If I remove the Arabic condition its working.
Is there something to do with the server?
My server is windows 2008 R2 Server.
The same workflow is running perfectly on another identical environment.
Thanks for any valuable suggestions,
Nith

Hi Sastry,
Connection to the database is trough Pivotal, I have tried ODBC connection as well but same error
The instruction at "0x005d53e0" refereced memory at "0x00000014'. The memory could not be "read".
With ODBC I have always compilation error saying
Query Engine Error: '42000:[Microsoft][ODBC SQL Server Driver][SQL server] Incorrect syntax near the keyword 'SELECT'. '.
but even the simple select statment is showing the error.
Do you think the error is with Drivers???
Regards
Stefan

Windows not working, please help me

Hi ... I have a problem with windows 8 in my macbook pro, in the past year it happens twice, first time it was solved by itself and now happened again and take too long around tow weeks, the problem is " Whenever i turn the windows 8 it just gives me the windows 8 logo then usually gives me black screen but you can hear the computer working and some times after the windows 8 logo appears it come a blue background with message said " it looks like windows hasn't loaded correctly ", and with tow options restart ( and it dose not works with me ), and use advanced tools ... pleaaaase i need help i dont know what to do.
Best Regards,
Amro

Windows 8 Support

Batch window not working. Help,plz its urgent!!

My batch window is not showing up stuff that I have submited from compressor, FCP still says its exporting but file does not work afterwards.
G5 Mac OS X (10.4.3)

You might want to check this note from Apple:
http://docs.info.apple.com/article.html?artnum=93234

Save as window from modal window not working

when i try to open an excel document from modalwindow, the download window appers, asking for "save as" or "open with". but there is no name of the file to be downloaded. and nothing happens when i click ok or cancel button. but from a normal window this works fine. the problem is only with modalwindow which i am opening using the javascript code showmodaldialog. How can i solve this. please help
== This happened ==
Every time Firefox opened

Hello.
Although possibly not related to your problem, I will remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. Furthermore, it has known bugs and security problems. I urge you to update to the latest version of Firefox, for maximum stability, performance, security and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
As for your problem, you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

Combining files into a single pdf stopped working

I used to be able to combine files into a single pdf on my Mac using Adobe Acrobat XI Professional. Now when I select "combine files into a single pdf", I just get a short vertical line with a gray cloud around it in the center of my screen. Do I need to reinstall the program?

Hi geolawrocks,
Welcome to Forums, I would be more than happy to help you with the issue but, i have few questions.
1) What is the error message you get while combining files?
2) When did it last worked?
3)Any changes to the application/OS that you made (Update)?
If possible, Kindly include the screenshot.
Thanks,
Vikrantt

Going to files by typing in Finder window not working

My entire life using Mac OSX I have opened finder windows and then began typing the name of the file or folder I wanted in order to get the finder to select that file/folder.
For example, if I have my home open I just type "Do" and the Documents folder gets selected. Then I can hit Cmd-O to open it.
This stopped working today, and I'm perplexed and annoyed about it.
I installed the Security Update 2006-007 last night and so I'm wondering if that broke this.
Anyone having the same problem/know how to fix it. Not being able to do this is making using my computer significantly more annoying.
Thanks you!
PowerBook G4 Mac OS X (10.4.8)

Also, I just tried clicking on the sidebar (I tried applications, desktop, and documents) and it will not navigate away from this window. If I exit the window and open a different finder window, it works. So what is it about this particular folder?

Finder window not working properly

This only just started happening, and it only seems to be happening to one or two folders...
First of all, this is what it looks like
as you can see, the file names look funky.
Also, if I edit a picture or delete one, it doesn't register the change unless I exit the folder and bring it back up.
Anyone know what's going on here and how I can fix it? This also happened when I tried to make a ringtone a few weeks back. I am running Yosemite.

Also, I just tried clicking on the sidebar (I tried applications, desktop, and documents) and it will not navigate away from this window. If I exit the window and open a different finder window, it works. So what is it about this particular folder?

Collect chats into a single window not working

Similar Messages

Maybe you are looking for