Collect trace data on router

What is the command to collect trace data on a router for a a given day between specific times ?

Hi Hemal,
If you are talking about the ICM router traces, than here we go,
http://www.cisco.com/en/US/products/sw/custcosw/ps1001/products_tech_note09186a00800ac69b.shtml
Hope it helps.
Anand
Please rate helpful posts..

Similar Messages

Apex Collections and dates

Apex Collections and Dates
I made an earlier posting today on the forum titled “‘ORA-01861: literal does not match format string’ error after my hosting company upgraded to Apex 3.2.” The issue relates to Apex collections and dates. Prior to the hosting company upgrading Apex 3.2 from 3.1 all was working OK. It seemed a reasonable assumption that the issue relates to the upgrade to 3.2. Having tested the code against another Apex 3.2 installation I am satisfied that the issue is not with Apex 3.2. That said, I am still getting the issue on the hosting site.
To demonstrate the issue to my hosting company and this forum, I put together a simple one page application that demonstrates the issue using the least amount of code.
I created a page with an ‘On Load – Before header” process that sets up an Apex Collection with a single value of ’20-FEB-2009’ in the c001 element as follows:
if apex_collection.collection_exists(p_collection_name=>'THEISSUE') then
apex_collection.delete_collection(p_collection_name=>'THEISSUE');
end if;
apex_collection.create_collection(p_collection_name => 'THEISSUE');
APEX_COLLECTION.ADD_MEMBER(
p_collection_name => 'THEISSUE',
p_c001 => '20-FEB-2009');
I added an SQL REPORT region to the page which uses the Apex Collection as follows:
select to_date(c001,'DD-MON-YYYY') testdate
from apex_collections
where collection_name='THEISSUE'
and to_date('20-FEB-2009','DD-MON-YYYY')
= to_date(c001,'DD-MON-YYYY')
When the page is run I get the ‘ORA-01861: literal does not match format string’ error.
If I remove the following from the SQL Report Region:
and to_date('20-FEB-2009','DD-MON-YYYY')
= to_date(c001,'DD-MON-YYYY')
and run the page, the date is displayed OK, i.e., c001 is converted to a date OK. This made me wonder whether it does not like the line to_date('20-FEB-2009','DD-MON-YYYY')? So I changed the where code for the report to :
and to_date(c001,'DD-MON-YYYY')
= to_date(c001,'DD-MON-YYYY')
i.e., convert c001 to a date and compare it to itself. The rationale being that if the c001 converts to a date OK, then comparing c001 converted to a date with itself should not give an error. It did it gave the same error ‘ORA-01861’
It would seem on my hosting site since the upgrade, that Apex and Oracle have problems with Apex Collection elements being converted to dates as part of the where clause.
Now my understating of Oracle Apex collections in simple terms is that all Apex collections are held in a single Oracle table managed by a series of Apex functions. Given that all Apex collections are in the same table, could the issue be with the Oracle database when it is creating its execution plan for the query? Could Oracle be including the value of c001 from other collections (i.e., when c001 is not in a date format ) in the initial stages of its execution plan?
I hope the above make sense and thanks in advance.
Ian

Scott,
I believe I have found the answer the statistics on WWV_FLOW_COLLECTIONS$ and WWV_FLOW_COLLECTION_MEMBERS$. are out of date and Oracle is doing a full table scan instead of using the indices to select only the c001 columns that belong to the given collection_id. If I change my simple example to store the date value in c050 it works ok. (In all probability this will be the only collection on the hosted database to use c050).
I have asked the hosting company to gather stats on all the apex tables.
Thanks for your help
Ian

How do I perform a trigger that collect the data for every rising edge continuously and then automatically put the data in a .xls file??

I need to collect the data for every rising edge a trigger perfoms. So far I could collect the data but it seems that it only collect the data in the start of triggering, but not continuously. I also want to put the data in an excel spreadsheet and automatically add new set of data when the next rising edge occur. Please help.
thanks a lot.

LabWindows/CVI actually ships with a comprehensive set of examples for just about every area of programming you can use it in, including triggered analog data acquisition and ActiveX control of Microsoft Excel for data logging. Go to the following two directories on your computer to find respective examples for the two areas you are inquiring about:
1) C:\MeasurementStudio\CVI\samples\DAQ\Ai\DAQsingleBufExtTrig.PRJ
2) C:\MeasurementStudio\CVI\samples\activex\excel\excel2000dem.prj
Just make sure to study the examples carefully so that you fully understand the processes followed for triggered analog acquisition and the process of launching an ActiveX automation server for control, and then you should be able to merge the concepts shown in both of the example
s to make the application you desire.
Jason F.
Applications Engineer
National Instruments
www.ni.com/ask

Mass collection of data sources in Transport request.

Hi All,
I want to capture the data sources which are available in RSA5. It is already activated and captured in Transport Request. But the Transport request was deleted by somebody.
I want to re-capture the activation of data sources which are there in RSA5. I want to collect 90 data sources in one Transport request.
Can you please guide me a easy way to capture all the data sources in transport request.
Thanks.

Hi,
you might be able to create a new Transport request and add the datasources manually.
check out the table roosource for the sources. you can find your's by filtering on tstpnm.
add the sources with object 'R3TR' and subobject 'OSOA'.
regards
Siggi

I'm doing a scan around a line by sampling data 360 degrees for every value of z(z is the position on the line). So, that mean I have a double for-loop where I collect the data. The problem comes when I try to plot the data. How should I do?

I'm doing a scan around a line by sampling data 360 degrees for every value of z(z is the position on the line). So, that mean I have a double for-loop where I collect the data. The problem comes when I try to plot the data. How should I do?

Jonas,
I think what you want is a 3D plot of a cylinder. I have attached an example using a parametric 3D plot.
You will probably want to duplicate the points for the first theta value to close the cylinder. I'm not sure what properties of the graph can be manipulated to make it easier to see.
Bruce
Bruce Ammons
Ammons Engineering
Attachments:
Cylinder_Plot_3D.vi ‏76 KB

How to collect my data from a disk that I suspect to contain a malware

I have experience several crashes the last 72 hours and I have to buy a new hard drive that I am using as an external drive to work from as a startup disk.
Once I install all my software back, how can I collect my data from a hard drive that I am suspecting to contain a malware. I previously use Bitdefender for mac and because I do not know which software is causing the problem, I just install Clamxav.
Please advise.

BitDefender was likely causing the problem.
Just plug it in and transfer the data. You'd have to install the malware for it to affect your Mac, but XProtect blocks all known malware from installing.

Using Data-Dependent Routing in combination with Membership provider

Hi there!
Currently we have two Web applications running on azure using a single SQL database. We are experiencing problems with performance because we are using only one database. We are investigating some solutions like documentDB and elastic scale.
DocumentDb seems like a really good option for us because it looks like it can be implemented easily and we know just what to do.
With elastic scale on the other hand we have to figure out what our options are. We are using a membership provider for our users to login in one of the two applications. The other web applications does not use a membershipprovider, it does not use a login
system at all.
in the backend of our code we determine a subscription_id for both applications to retrieve tenant data.
I think we have a few options here
1. to keep using the membershipprovider we could create a database just for the login mechanism so we can determine the subscription_id, and with that subscription_id we can use Data-Dependent Routing to retrieve the correct data from the correct shard.
2. We can add extra columns to the Shard Map Manager database (i think i've read that it's not supposed to be used for user data) like username and password so we can login through this database.
Does anyone has better options than the options mentioned before and can anyone give me advise on how we should deal with these issues?
Thanks!

Elmar --
The best approach would be to maintain the Membership DB in a separate Azure SQL database. Then you could shard your transaction details across an Elastic Scale set of databases based on the subscription ID. (The Shard Map Manager
database is not designed to be extended with additional columns, and Elastic Scale works by caching that Shard Map data in the client application anyway, and those in-memory structures can't be changed).
You would use an ordinary ADO.Net connection to query membership for a Subscription ID, and then get an appropriate shard-specific connection using the Elastic Scale GetOpenConnectionForKey method, passing the subscription ID retrieved from
the membership query.

How can I read the trace data from Agilent(HP)8510C in C++ using NI488.2 and PCI-GPIB ?

Hello! I am trying to develop an application in C++ for measurements with Agilent(HP) 8510C network analyser using NI488.2 and National Instrument's PCI-GPIB card. In HPBASIC the trace data is read using OUTPDATA command which contains PREAMBLE, SIZE and then the data string in real and imaginary pair for the required points. The ibrd function gives data only for one point. Kindly guide me how I can read the whole trace and and separate out the real and imaginary data values. Regards, kapil

Hey Kapil,
It seems that in HPBASIC you were using an instrument driver for the 8510C. OUTPDATA is not a native HPBASIC function. National Instrument has similar instrument drivers for LabVIEW and CVI.
http://zone.ni.com/idnet97.nsf/9b2b33e1993d877786256436006ec498/7b235254f3881ddb862568ab005fbd2e?OpenDocument
http://zone.ni.com/idnet97.nsf/9b2b33e1993d877786256436006ec498/24ca7db880ab78ae862568ab005fbc0f?OpenDocument
For example in the CVI instrument driver you will find a source file called hp8510.c. In the source code you will find a function called hp8510c_dataInRaw that sounds similar to the function that you described.
Note that this example is designed for CVI, but it is possible that you could extract the information you need for C++. If
you had a copy of CVI you could just add the files downloaded from the instrument driver to a project and then compile and run the project. It already contains a ready to run example that allows you to capture data and use your instrument.
If you want try CVI you can download an evaluation copy on-line at http://ni.com/lwcvi/launch.htm.
I hope this helps out,
JoshuaP
National Instruments

Simplest approach for creating database for small collection of data - new project design phase

Hello. I am at the design stage of a VB.NET project, which I hope will help me strengthen some skills I have learnt so far, and learn new ones. I have a couple of questions. Firstly regarding data types, is there a unified, standardised, all-convergent
data type available I can use? Secondly I've read about numerous avenues to create a database, namely binary serialisation, access-based, excel-based, notepad-based - The project I intend to create, will only require storage of a "relatively" small
collection of data, which may grow over time, but not significantly - so, taking this into account, which method is advisable for creating my database? (a beginner-friendly option is preferred). I have included a couple of images, with my questions, to give
a rough idea of what I'm planning to do. Thanks for your advice and suggestions.

Type would be the type of recording, as in LP (Long Play - standard album), EP (Extended Play) or Compilation. Most would be LP.
Chris,
I have a start on this and I want to pause here to post what I have and to discuss it.
There’s a lot to talk about because you’re going from little knowledge of a class to a lot in a hurry. There is no real hurry
in any of this; if you don’t understand then let’s stop and talk about it – until you fully have a handle on it, adding more would only fuel the confusion.
I’ll add this at this juncture: There is no one single right way to do this. There are definitely some
wrong
(or maybe just simply ineffectual) ways, but certainly no single right way. A lot of what you’ll see in the following will reflect my preference; nothing more than that.
Also though, I’m doing some of this to expose you to it. By that I mean that I may or may not have done it this way all along,
but I decided that I want to open the doors, even though at first it’ll seem like you’re trying to get a drink of water from a fire hydrant. ;-)
I have it set up with two namespaces: CMJR and Common. The latter one is for use for what I’m considering to be a ‘common’ need
– things that you may use in several classes. In time, the routines for serialization will be there but no need to even talk about that now so it’s not there.
The code so far (which I’ll show by the end of this discourse) is about 500 lines. For a class library, that’s puny! Most of
what I have thus far is just a shell of what will be filled in later. I won’t at all be surprised that by time this is completed, that 500 lines can easily grow to 5000 lines or more.
Like I said yesterday, the great thing about doing it this way is that it’s done
your
way; the drawback is just how much there is to do though, so if nothing else, this will perhaps influence your decision on how you want to handle things like this in the future.
The namespaces/classes are laid out as:
CMJR
Music (a class)
Film (a class)
Games (a class)
Common
IDataSource (an interface)
IGenre (an interface)
Utilities (a class)
This
image shows the structure of things thus far. The reason why the enum “GenreType” isn’t expanded in that
image is because it’s hugely long! In fact I fully expect that you’ll likely delete most of those. I got them from someone else’s class library (about a decade ago) so it was convenient to use.
Let’s start from the inside and work toward the outside here:
What is an
enum?
An enum (enumeration) is a type all its own. It’s a constant (of integral type) that you define. You can think of it as “an
integer with a name associated with it” because in code, you’ll use it like a multiple-choice selection and [typically] you’ll use its name.
Any time there’s a need for some something to be “this or that”, an enum very often is a useful type to use. In what we talked
about yesterday regarding what the source of the data is (CD or PC), that’s what came to mind; select which of the two from an enum. I always include a “_String” property with these so that it can later be used in whatever will consume the class. Often it’s
nothing more than use the .ToString method of the enum itself, but remember that then enum is actually an integer, not a string.
In this library so far, I have three enums defined. Two of those are in each of two interfaces (discussed in a bit) and one
is specifically related to only the music, so it’s in the class “Music”:
       Public Enum MusicFrom
           LP
           EP
           Compilation
       End Enum
The “type” that I asked about earlier is encompassed in that enum and you can more or less see how it works without any further
explanation.
Do understand that enum is only ‘useful’ for programming. We could use strings for all that it matters, but the problem with
doing that are many, including things like typos and capitalization. That’s not the case with an enum because you select one of the choices offered. In the one above, that would be either LP, EP, or Compilation. It can’t be anything else.
So if strings have this issue with typo’s and the like, what about if we just assigned it a number (an integer). Sure that’s
a better idea but are you really going to remember what 23 means? I doubt it, or not for long.
BUT – if we had a number that has a string associated with it, yea that’s a good idea!
Right! Now you know what an enum is. ;-)
Notice from the
class
diagram though – it’s not shown; I’m not using it all and that’s because I question its worth here, at least
for the current setup. I’ll explain what I mean:
As it’s currently set up, the basic unit of the class “Music” is a song. Even though there’s a title for the album, the album
– as a type – doesn’t exist. LP, EP, and Compilation refer to the album, not the song (in my opinion here) so I don’t see how it can be used.
If, however, we create a new type called “Album”, then I can see how it could be used. In something I worked on a while back
that’s exactly how I have it set up: An album is a “container for songs” and the album (a class in what I’m referring to from a few months back) has certain properties like a name and cover art, etc..
I don’t have this set up that way, but give that some thought.
What is an
interface?
Until quite recently I ‘knew of them’ but I never used them. There may or may not be merit in it here either but I wanted to
expose you to them.
From that link above:
“An
interface defines a set of members, such as properties and procedures, that classes and structures can implement. The interface defines only the signatures of the members and not their internal workings.”
The interface is a way in which you create a ‘code contract’. You don’t define what the methods, properties and events do in
the interface – you define that they have to be implemented if a class uses it.
It’s up to the class to actually put it to use (i.e., the code that’s executed in the member of the interface).
It’s a lot deeper than I’m discussing here – including a fair amount of ambiguity – so I won’t go any further than that for
now.
I have two interfaces set up and I have them in the “Common” namespace. They are “IDataSource” and “IGenre”.
IDataSource has an enum named “SourceType” and two read-only properties (see it later in the code).
The interface IGenre is likewise set up the same way and that’s where the long list of elements are in the enum named “GenreType”
that I talked about earlier.
I think it’s a good idea with Genre that it’s a “pick one of these” rather than simply a string and here’s why: If we later
add in a method to choose songs from a collection of them, one of the options might be of a particular genre. That’s not an uncommon request I would think. By using an enum, we don’t have to worry about your users mistyping when they add the data:
RockAndRoll
Rock and Roll
Rock
…etc., and imagine some of the typos your users might come up with, so by using an enum it’s definitive rather than guessing.
I said that an enum is ‘only for programming though’ so we’ll need to make it more usable later on. For example, I can also
build in methods to hand you back a string array of the string equivalent of those enums and then later a method to turn that string back into the actual enum member. By doing this then the method(s) which will use this will filter the data from the collection
to only include those with that particular genre.
Other than something simple, I’ve learned that once you get involved in a really long enum – like the genre that I showed above
– it’s better to create a class which, all on its own, has methods for handing you the string array and then handling the conversion back to an enum, so that’s a possibility too.
That’s for use in your UI so the blinders will start to come off at that point. ;-)
Continued in a subsequent post…
Still lost in code, just at a little higher level.

Where does Apple collect their Date & Time Information?

I'm trying to isolate a problem for why the date and time for Unalaska and Dutch Harbor, AK when set automatically is on Hawaii Time when it should be on Alaska Time. The islands further west on the Aleutian Island Chain are on Hawaii Time, but not Unalaska Island. While in Unalaska, I have to set date & time on all my Mac devices to manual, and switch it back to automatic whenever I leave. As much as I travel, it is a nuisance having to switch back an forth between automatic and manual. This has been an ongoing problem for the past 2 or 3 years, and previously, it worked correctly.
I've noticed that some date/time websites have it wrong, but some have it correct. So, if I can find out where Apple collects their Date & Time information, I should be able to figure out whether it's an "Apple" problem or an "ISP" problem.

Chris CA wrote:
OGELTHORPE wrote:
Terence Devlin wrote:
Wonder why Ford, General Motors and all those car manufacturers don't do this? Hmmm?
I thought that they put out recalls for stolen cars. Am I wrong on that?
Yes.
A vehicle recall is to fix issues that the manufacturer feels they need to do something about such as bad parts.
Or the Government felt they needed to do something about.

BUFTYPECONV vs Data Dependent Routing

Hello everyone,
when using BUFTYPECONV for a service in conjunction with data dependent routing, which buffer type is used for the DDR? The original buffertype or the converted?
If I re-phrase the question: Which operation is performed first - buffer conversion or data dependent routing?
Any input on this welcome,
/Per
Per Lindstrom R2Meton AB, SWEDEN

Per,
The datatype conversion occurs after routing in the server that has been
chosen to process the service.
When the server receives the message and sees that it has receved an XML
buffer for a service with BUFTYPECONV specified, the postrecv function for
the XML buffer type converts the buffer to FML or FML32. When the service
calls tpreturn(), if the buffer passed to tpreturn() is an FML or FML32
buffer, it is converted back to XML before the reply message is sent back to
the caller.
<plindstrom> wrote in message news:[email protected]..
Hello everyone,
when using BUFTYPECONV for a service in conjunction with data dependentrouting, which buffer type is used for the DDR? The original buffertype or
the converted?
>
If I re-phrase the question: Which operation is performed first - bufferconversion or data dependent routing?
>
Any input on this welcome,
/Per
Per Lindstrom R2Meton AB, SWEDEN

Data dependent routing with WebLogic

How do you do data dependent routing with WebLogic Platform? Does it require additional
products or can it be done just using WebLogic Platform components?
Thanks

WLI, or "WebLogic Integrator" may be what you are looking for, this is a
          full fledged message-flow/routing product built on top of JMS.
          If your needs are simple, you can roll-your-own data dependent routing
          using the WebLogic server built-ins of JMS, which provides reliable
          messaging, in combination with MDBs and/or Messaging Bridges - both of
          which allow the specification JMS selectors (filters). Furthermore,
          your MDB application can enqueue to a specific local destination (or a
          remote one, which is harder) based on the contents of the message it
          receives. Voila.
          For example, WorkQ (local or remote) --> MDB --> JobQ1 or JobQ2 or
          JobQ3. To simplify the MDB logic, JobQs could be on the same server,
          and therefore always available. (This is one of the advantages of
          having a JMS that can run in the same JVM as the app server, the other
          is very fast performance.)
          Tom
          David B wrote:
          > How do you do data dependent routing with WebLogic Platform? Does it require additional
          > products or can it be done just using WebLogic Platform components?
          >
          > Thanks

Is Their Any Support For Data Aware Routing Through The Coherence DataGrid?

Hi all,
Following paragraph describes the feature i m looking for(*Data Aware Nodes*)......
The Function Service can transparently route behavior to one or more nodes in the cluster. In the case of Data Aware Functions, the behavior can be directly routed to the node(s) that hosts the data needed to execute the function in parallel, stream and aggregate the results substantially reducing the time taken to execute complex data intensive tasks.
So please tell me is their any support for above said question. If this feature is their in coherence please help me with it's configuration and implementation as well.
Thanx

Hi JK thank you for your reply
I want to achieve Data Aware Routing in Parallel Execution (Parallel Function Execution).
Consider a case where i have three nodes (say Node A,B C) in coherence cluster with partitioned scheme. Now suppose we have Employee related objects stored in cache of Node A and Node C only, but not on Node B. Then i want to perform some operation on Employee objects only in parallel fashion.
In coherence i ll achieve this using map.invokeAll(collectionKeys, agent);_ from client program.
Now my question to you is, as my operations are based on Employee objects only which are stored on Node A & c. Then When i request parallel Execution from client program which will connect to Node A from our cluster, will it go to Node B where their is no Employee objects ??????
Edited by: 981644 on Mar 6, 2013 7:52 PM

I connect my pendrive to macbook pro but it cannot detect and my important data is there in my pen drive so how can i collect this data from my pendrive?

i connect my externalpendrive to macbook pro but it cannot detect and my important data is there in my pen drive so how can i collect this data from my pendrive?

make sure that in your finder preferences you have it checked to show external drives on the desktop and in the sidebar of finder
you find these preferences by selecting the finder icon (blue square on the dock w/ smiley face on it) then click on the work "finder" at top left corner of computer screen then click on preferences then general and put check next to show these items on the desktop and put check next to external drives
now you should see it on the desktop if you still can't open the drive or access it, it may be in format the mac can't read or write to so that could be an issue.

"Service Advisor" option in CAM to try to collect support data ......

I've tried using "Service Advisor" option in CAM to try to collect support data I get the error "The device has been unregistered from this application. Please close this service advisor window.".
How to fix this?
Thank you

Hi.
1. You can use command line for collect support data.
/opt/SUNWsefms/bin/supportData -d <array_name> -p /tmp -o supportdata
Result : /tmp/supportdata.zip
2. For trubleshuting current problem, please show result of:
cd /var/opt/SUNWsefms/store/Reports
for i in report* cache*
do
echo $i
perl -ane '/[^[:ascii:]]/ and print;' < $i
doneHow many arrays registered in the CAM ?
Check that for this array work next point in CAM:
-> Trubleshuting -> FRU
-> Trubleshuting -> Events
Regards.

Collect trace data on router

Similar Messages

Maybe you are looking for