Collecting INFOPACKAGE in Transport request individually

Hi ALL:
While collecting infopackage in Transport request individually(Flow is Infosources> Tools> Object Catalog Entry), it is not prompting to enter the valid transport request number(after entering the valid package name).
Can anyone suggest me how to get the screen that prompts to enter the valid transport request number.
Thanks

Here is the steps to collect objects under transport request:
1. rsa1->transport connection
2. left panel choose 'object type', middle panel choose 'infocube' and 'select objects'
3. then choose your infocube and 'transfer'
4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
5. after objects collection finished, create request. Repeat the same steps with grouping 'in dataflow before'
6. If they are $TMP, then change the package.
7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
8. You can check the request in SE09 to confirm.
9. If everything is ok, release your request and ask your basis/security guy to move to QA.
OR
When you will create any object and save it, system will ask you to save under transport request and you can either save it under your transport request or can create new request.
Hope this helps..

Similar Messages

Collecting Datasources in Transport request in R/3

Hi Experts,
Can anyone give information of how to collect Datasources in Transport request in R/3 Development system.I want
to move datasource from Development to Quality system in R/3 side

Hi,
Go to RSA6 R/3, Select your datasource. Click on the Transport button. Then this asks Transport request, then you can collect.
Or Select your datasource and click on change. In this way also, you can collect into TR
Hope this helps,
Regards,
Rama Murthy.

Collecting Datasource in transport request

Hi All,
I have query I have did the enhancement to data source YDS_SO_COND_PTNRFCT I am moving this request from ECC development to ECC quality system. I collected the data source in RSA6 ,but when I check the request only I found the data source the extract structure was not collected so I went to particular Extract structure collected manually. The request went successfully but the field is not visible in the extract structure in quality system.
So my query is while collecting the data source in rsa6 is extract structure will collect automatically in transport request. Anyone know what will be the reason why the changes are reflecting in extract structure.
Regards,
Nandini

Hi,
Data Source is nothing but a Extract structure. When you do changes for the structure and click on save automatically extract structure also will collect.
Is the field custom created or standard.
Before transporting of Extract struture check all the dependent objects are collected properly or not.
let us know the details.
Reg
Pra

Collecting objects in transport request

HI Experts,
                My development is completed and now i have to collect the objects in transport request. my development is like
1) infoobjects(new infoobjects and some are available in BIP already and some infoobjects have reference infoobjects, dependent object is in production)
2)Infopackeage for Datasource
3)DSO
4) Infocube
5)multiprovider
6)queries and views
7)web templates
This is the first time I am collecting this many objects. So please give sugessions how to collect these objects in a single transport request.
Thanks and Regards,
RAJ

It is advisable to collect the objects in separate transport requests...the transport request should contain dependent objects
1) collect all the InfoObjects
2) collect all the cubes/DSO   (they need Infoobjects.. so they are dependent on 1)
3) collect datasources/Infosources (they need Infoobjects.. so they are dependent on 1)
4) collect transformation (they need 2 and 3)
5) collect DTPs and InfoPackages   (they need 3, 4)
6) collect the reports
7) collect the web templates
make sure these are transported in sequence... each on dependent on previous

Unable to collect objects into transport request BI 7.0

Hello all!
I have a fresh installation of BI netweaver 2004s. When attempting create a transport (in transport collection), I get the following error message:
Changes cannot be made, display user only
Object IOBJ xxxxxxxx couldn't be saved to order
The message is repeated for about 50% of all the objects I'm trying to include in a transport...
How can I fix this? Has anyone seen the problem before?
Regards,
F C

I am not sure on which system(Dev,QA,PRD) you are trying to collect..looks like you dont have authorization ..but then if it is only infobjects and you have a transport request already created..you can try this
goto se09..double click on your transport request you created.. go to change mode.. Go to Objects tab--> Add an entry like below:
R3TR under project..
IOBJ under Object type and
<your infobject name> under object name..and save..
Regards
Manga

How to collect variant in transport request.

Hi all,
I have created variants using table TVARVC which I will use to populate values for variables in Information Broadcasting.
But I dn't know how to transport variants.
Please provide step by step to collect variants in a transport request.
Thanks,
Uday.

Hi Uday,
check here...
transport variant
Thanks,
Vijay.

Including InfoPackages in Transport Requests

I want to include an InfoPackage in a transport request so that I can transport it from development to test. However, when I open the InfoPackage and try to include it I receive an error message informing me that Deltas have already been loaded. This is correct, but why would it stop me including the InfoPackage in a transport request?
Does anybody know what I can do about this?

Hi Stuart,
I guess you are trying to transport the "init" load infipackage. If so then change the load option to "full load" and then transport. You can later change the option in QA.
Bye
Dinesh

Incorrect Transport Requests : SAP delivery version getting collected

Hi,
In our development system, when we try to include objects in a transport request, the entries in the transport request are getting saved as the SAP Delivery version rather than the active version.
For example an ODS ( z object, newly created in development environment) entry is being logged as R3TR DODS XXXX (Obj name) rather than R3TR ODSO XXXX.This is happening for all object types ( Info objects, cubes, workbooks etc).
Also while collecting workbooks in transport request ( using transport connection) we got the following error -Logical transport object 414Q not found in table RSTLOGOPROP. Not sure if the above two issues are interlinked.
Appreciate your help on this.
Kind Regards,
Bansi

Hi KxD,
I don't expect the loading date to be equal to the delivery date but I expect it to be 2 days before the delivery date since the time specified on the route is 2 days. So I would expect my loading date = delivery date - 2 days (route time)
The way system is acting is loading date = committed date + 2 days (route time).
FYI.. when you turn on route scheduling the delivery creation date is based off of your route time and not your planned delivery time from the material master
Thanks,
Imran

Collecting the Piece list in Transport request.

Hi All,
For Currency translation, i have created the Piece list in Development system.
Can you please guide me how to collect it in transport request and transport to other systems.
Please suggest.
Thanks.

Hi,
This is useful if your system is ECC or Bw.
at Dev system which t code you created your list.
From same screen, explore with menu options, there will be a option like direct object entry - its used to collect into transport request
or
Below method useful if your system is BW.
Standard way - You can use Bw RSA1-->transport connection, find your object from middle pane and move to right side pane, later you can collect into transport request.
Thanks

How to collect a tranformation and routines in it in a transport request

how to collect a tranformation and routines in it in a transport request.
also if a tranfer rule and its routines to be collected in a transport request.

goto RSA1-> Transport connections
select object types in the left pane..drop down the transformation type and select the transformation that is to be captured.
move it to the right pane. Right click on the transformation and select 'do not check any below' if you do not wanna transfer the source and the target info providers. Drill down through the transformation and select the routines that needs capturing.
select 'package' and give the appropriate package name and save it. It will ask for the request number and give the requst number.
The objects are collected.
To check go to se01 and check under the requests if the objects are captured.
-Srivatsan.S

Sequence of collecting objects for transport in BI

I am making a display attribute to navigational attribute, kindly let me know the sequence of collecting objects for transport request.
i need to check in infocube as well in multi provider.
please let me know
thanks,
Venkat

Hi,
Make sure the Infoobjects(in which you are changing it from Display attirube to Nav attribute) and collect the other things in a seperate request (Infoproviders, the deativated transformations and the DTP followed by Queries). Release the request to QA/Prd in a sequence(Infoobject request first and the iinfoprovider request as followed by the successful movement of the first one.
The STMS automatically take cares the sequence of trasnporting the objects one by one to the destination system.
Regards,
Venkat S

No object can select when collecting objects for transport

Hi.Experts:
When I use RSA1 and want to collect objects for transport,I found that no objects can be found for some object type,such as ISTD/TRFN etc, any body who know this situation?
Best Regards
Martin Xie

Hi Martin,
best way to collect objects into transport request is throught RSA1 -> Transport connection.
in Transport connection, you have different options to collect objects into transport request.
In data flow before...
here you can see objects that are already have transport request, package...
Regards
Daya Sagar

Collecting ABAP's into Transport Request

Guru's
I have about 100 ABAP Programs that start with ZC* these are all transported into Q system. But now due to technical reasons we are collecting Individual objects into different Transport requests to import into our Q & P systems respectively... Collecting Infoareas,DSO's,Cubes, and etc.,. had been quite easy.
Now the issue : Is their a possibility that I can collect all the ABAP's in one shot and these should include the dependencies (Tables;FuMo's) etc.,
A tip in this regard would be highly appreciated.
Regards
BVPK

Hi BVPK
I think there isn`t such a easy way you want to go.
But I`ve got a little work around to make it easier (I hope)
Call TA: SE03 --> select "search for requests --> press F8
Next screen, pres F8 again --> select/create a transport request -> press (Ctrl+F11) "include objects"
select "free choosen Objects" (sorry, it`s a german language system here) and enter.
--> now tyoe in the paket, your allready transported objects are assigned to --> F8
Now you got a stuctured list with all your components. You can mark (F6) every single entry you need and include all the marked in your selected transport request.
Hope this helps a little bit
Greets
TOM

How to collect the deleted query in a transport request.

Hi Friends,
I have created a query and transported it to the Quality, the data content is all ok, except that i have not used the Project Naming conventions. Now i have a defect against my name for this. I have to copy the same query with the correct Naming convention and transport it.
My question is after copying the query with correct name i have to delete the old query (if not there would be 2 versions of the same query). How do i collect the deleted image of the query in a transport and send it to quality?.
I tried deleting a test query from Bex Designer, but this does not ask me for a transport. should i use RSZDELETE?. Not sure if it asks for a transport request when i delete the query.
Can someone pls tell me how to go about this?.
Thanks in advance.
BN

Hi BN,
I do agree that deleting directly in Quality and Prod is not good way and not recommeded.
I have not tried and deleted.But if the system is configured in such a way that if it doesnt ask for a request
then i feel you have no option.
If any object is deleted then you must have the deletion image collected into request at the same point when you are deleting.Because later when we go to transport connection we wont find the object itself.
What i think from your point as you said you have done earlier is you must have any open request regrding this query and when this query is deleted , the deletion image is also included in the same request.
So go to se03 and give your deleted query name and check all the requests.
Check in the requests when the deletion image is captured or not. we might be knowing that this is cpatured.
Regards
vamsi
Edited by: vamsi talluri on Nov 9, 2010 9:14 PM

Error while collecting the process chain in a transport request

Hi Gurus,
I am getting an error while collecting my process chain in a tranpsort request.I have to transport the request from DEV to QA system.
When in RSA1--->transport connection i drag & drop the chain from left to right side pane then the Error occurs.
1.Object 'REQUDELZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPV) of type 'Process Variants' is not available in version 'A'
Sap help given
You wanted to generate an object with the name 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPT) of type 'Process Chain Starter' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
2.Object 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPT) of type 'Process Chain Starter' is not available in version 'A'
Sap help given
You wanted to generate an object with the name 'REQUDEL ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPV) of type 'Process Variants' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
From one of the threads:
(https://forums.sdn.sap.com/click.jspasearchID=10081153&messageID=4623856)
i though it was the problem of patch level sap note(966131).
Accordingly i tried collecting process chain in the request where the patch level is high(24).But same error is seen.
I have activated chain again & then tried collecting the request i the process chain.But did not solve the error.
I have to collect Process chain in a transport request.Can you help me out to solve the problem?
Thanks in advance!
Regards,
Pallavi

Hi,
take a look:
Data Warehousing
"Errors occurred during post-handling RS_AFTER_IMPORT for MPRO L "
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
Try to set the Process Chain Start to Immediate(background jobs) in the schedule, because this will trigger the process chain once tranported and may cause similar errors.
Regards
Andreas

Collecting INFOPACKAGE in Transport request individually

Similar Messages

Maybe you are looking for