COllection Editing Issue

I have a collection on our state K12 site (not yet published) that will not open the Feed Editor for editing content. When I click the "Feed" link, I get the framed site, but no content. I do not get any error messages. Anyone had something similar happen and find a way around the issue?

Greetings from Tennessee;
I encountered this issue when I was prepping our site for the transition to the new Site Manager environment. Unfortunately, I could never find a "work around". The problem seems to be with the Site Manager environment.
Apple's engineers monitor this discussion and should respond promptly. All the best on getting your site up and running!
Syd Rodocker
Tennessee Department of Education
itms://deimos3.apple.com/WebObjects/Core.woa/Browse/tbr.k12.edu-dz

Similar Messages

Why iCal cancel of event edits issue is still not fixed after over 2 years?

Why iCal "cancel of event edits" issue is still not fixed after over 2 years?
I have been in the software engineering industry for over 14 years, but I have never seen a large corporation being so slow at addressing major issues like these.
What would it take for Apple to start working on this issue?

Yup. This is fully ridiculous that you can't cancel your updates once you start. I love the tool but this is on pretty significant issue.
Sometimes I accidentally move a mtg or make some edit while viewing and you can't back you!!
If you feel the same way, you should post a note here:
http://www.apple.com/feedback/ical.html
Message was edited by: SteveMc10123

Citrix Netscaler AppXpert with Sharepoint 2010 Page Edit Issue

Posting this as a questions and discussion point.
The issue is in using Citrix Netscaler with AppXpert with SharePoint 2010. I've seen this issue for two customers.
Configurations:
- Citrix Netscaler as the load Balancer
- Netscaler AppXpert for SharePoint deployed on Netscaler (using either AppXpert version 1.1 or 2.0)
- SharePoint 2010 Standard or Enterprise editions
Issue:
A SharePoint user with appropriate rights go to a SharePoint page. They choose Edit page, make changes and want to save changes. At this point all SharePoint ribbon options on the top are greyed out. End result, users are not able to make changes to their
site pages. Issue happens for everyone including Farm Admins.
Cases:
a. The users are able to edit and save SharePoint wiki pages if I point user's PC to the SharePoint web server WFE by changing their local host file.
b. On Citrix Netscaler, if I use the traditional load balancing i.e. without Citrix AppXpert, then the users are able to edit and save the pages. That is an option if the customer is using SharePoint 2010 Standard. That is not an option if a customer is
using InfoPath forms. InfoPath is a feature of SharePoint 2010 Enterprise edition. Citrix AppXpert for SharePoint is needed to make the InfoPath work. Else the users get session errors when they use InfoPath Web forms.
c. The issue happens on almost all combination of OS and browser. XP, vista, Win 7, Win8, Win8.1, IE8, 9, 10, 11 and other browsers like chrome etc as well.
Please share your ideas and suggestions.

Hi Faisal,
As I understand, the issue will be solved when end users directly connect to SharePoint WFE servers. Since the issue is related to third party products, I'd recommend you contact their support engineer for sufficient resource and assistance. For your convenience:
http://discussions.citrix.com/forum/150-support-forums/
Should you need more assistance, let me know. Thanks for the understanding.
Regards,
Rebecca Tu
TechNet Community Support

Collective goods issue in production

Hello All,
We want to do a collective goods issue in production. Is there a chance in SAP that we can do a goods issue by supply area or MRP controller. We don't want to enter manually the group of production orders in MB1A or don't want to do backflush. Is there any way, please advice.

Dear,
In standard SAP are we issue the good In MB1A (261 Mov type) with reference to order and which having the reservation.
The dependent requirements are planned as per BOM explosion. Item materials are issued against header material to complete header material production.
Goods issue takes place against the production order at the start of the header material prod order.
But MB26 will allow you to issue for serval orders,
Hope clear to you.
Regards,
R.Brahmankar

Collective goods issue

Hi
Any collective goods issue for production order is there in standard SAP?
I checked in MB1A, there i can enter only 5 production order using with reference to production order. Beyond that no option was there.
So any option is there. pls.

Hi,
You can do it by T.code MB26.
Regards,
Dhaval

Toy Story Collection Edition

Hi Apple,
I was just wondering when the Toy Story Collection Edition will becoming avliable on iTunes Store, as i'd like to purchase the bundle pack instead of buying indvidually; i've seen this advertised a few months back, but haven't seen it again since?
Cheers,
James

Jamalam10 wrote:
Hi Apple
This is a user-to-user forum: you aren't talking to Apple here, and we don't know any more than you do about their future plans (in any case it's up to Disney rather than Apple and quite possibly if you asked them they might be able to give you some information).

Creative Suite 4 Master Collection Install issue

Hi,
Hopefully someone can shed some light on my problem...
I have a brand new copy of CS4 Master Collection which I shelled out a lot of money but I am having problems getting past the first minute or so on the first install DVD!!
I keep getting an error that says 'SYSTEM ALERT' The Minimum System requirements are not met'
I am running Windows Vista with Service Pack 1 on a laptop with 2GB Ram and 1.73Ghz.
1) Adobe state that 2Ghz is the minimum. Is this pretty strict or do you think I should be okay with the 1.73Ghz I currently have? Could this be one issue as to why the requirements are not met?
2) I have removed all adobe products such as Acrobat, Flash Player, Flash Plug Ins, Adobe InDesign CS2 etc. Do I need to remove Photoshop 7.0, Dreamweaver MX and Flash MX too or are these not affected due to being original Marcomedia Products?
I am not too sure why Adobe CS4 seems to think my requirements are not met??
Can anyone shed any light on this? Am I missing something obvious?
Any help would be appreciated
Cheers

Thanks both
Karen - Yes, Vista Home Premuim
Bob - i had to edit my last post on here as I did think I had SP1 installed but I am starting to think that I actually don't!!
I checked my Windows Updates and it seems that SP1 updates since July 2008 have failed to install properly.
When I check my system info it doesn't list SP1 anywhere on my PC.
Anyway, I downloaded the Readiness Update file and ran that. All went fine. I then downloaded the 455Mb SP1 file and can't seem to get past the first 10mins of that. I just get an error 0x800B0100
So, as it stands I cannot install SP1 and CS4 stays lonely and unused in it's packaging :-(
Any other ideas? Or is this something I really need to take up with the people at Microsoft/Vista?
Cheers

Adobe CS3 Master Collection Install Issues

Im at my whits end with this, I have got the master Collection on a disk, but when i try to install it opens the installer and the bar opens but then it just silent closes (no error messages) after a second or 2... without any progress...
The details;
System Specs:
Dell Inspiron 1545 Laptop, Intel Core2 Duo Processor 2GHz, 3GB RAM and 320GB HDD
Running Windows Vista Home Premium, Service Pack 1, 32bit Edition
I have previously had Photoshop CS3 and Premier 6 installed, but i got rid of those prior to install attempt number one!
What I have tried so far;
- I have deleted all Adobe software off my computer, therefore it isnt a software clash.
- I have tried turning my anti-virus off and on, so it isn't an anti-virus or firewall clash
- I have tried all the recommended tips on the Adobe website
- I have all the correct files for running the software, I have also tried running it on a different laptop, and it worked.
- I ran CCleaner, and a registry cleaner, still nothing
- I realised I forgot to get rid of Macromedia Flash... Promptly removed it; still nothing.
I am really getting upset by this now (upset and angry)
All tips would be much appreciated and I will be forever in debt to whoever solves this issue!
Thanks
Josh

I have also had trouble uninstalling Adobe Photoshop CS3, as i said above i tried to get rid of it, however i couldnt remove it via the uninstall menu, so i deleted it from program files (and all other traces of photoshop i could find) however the option to unistall is still their, but when i try to uninstall it comes up with the error message that is attached...
im assuming these 2 problems are linked... so help with this would be useful..
thanks!

CS4 Master Collection Activation issue

I have installed CS4 master collection on my 2 PC's.
The first of these was a new build PC using Vista Ultimate 64bit, I installed Vista and CS4 on a RAID 0 array comprising 3 Sata drives. CS4 was then activated on this machine as well as my other machine.
After a couple of days the RAID array started showing errors, which I believe was down to the poor nVidia drivers / onboard controller.
Anyway I reinstalled Vista & CS4 onto a single drive, when it came to activating CS4 however I get a message saying the serial no. has already been activated on 2 machines.
Now Adobes FAQ states that CS4 will recognise a reinstall on the same machine, however I think that because I have gone from a RAID array to a single drive then CS4 will not be able to detect this as the data will have been spread over the 3 physical drives.
I have contacted Adobe support and am waiting on a response, in the meantime is there something simple I have missed?

The RAID problem was with CS2.
The OP's issue is that he didn't deactivate before reinstalling. Only
Adobe can help and there should be a phone number to call for activation
assistance on the activation denial screen.
Bob

CS4 Master Collection Installation Issues

I recently purchased a new Dell Studio Laptop and attempted to install the CS4 Master Collection last night. There are 5 Application Disks total in the package. It starts out fine, goes through the first disk, asks for the second (had minor issues with the 2nd disk being read by the lap top, but once it was recognized that installed as well), then when I insert the third disk, it gives me a screen that just says "exit." At first I thought the additional two application disks may just be extra apps, but when going through my systems menu, many of the programs that should be there are not installed. What is happening? And how do I fix it?
Thank you

I recently purchased a new Dell Studio Laptop and attempted to install the CS4 Master Collection last night. There are 5 Application Disks total in the package. It starts out fine, goes through the first disk, asks for the second (had minor issues with the 2nd disk being read by the lap top, but once it was recognized that installed as well), then when I insert the third disk, it gives me a screen that just says "exit." At first I thought the additional two application disks may just be extra apps, but when going through my systems menu, many of the programs that should be there are not installed. What is happening? And how do I fix it?
Thank you

Windows Server 2012 Pooled Virtual Desktop collection GetVMstate issue

I am trying to create a Pooled Desktop collection with my Powered off VM and it errors out The
virtual desktop must be in a stopped state: Could not identify the state of the virtual desktop. Ensure that the RD virtualisation host server is available on the network and the virtual desktop is shut down
In the debug logs it shows.
Component RdmsModel: GetVMstate for Vm Win7_BaseVM failed with error 16386
Component RDExceptionHandler: Could not identify the state of the virtual desktop. Ensure that the RD Virtualization Host server sunflower-1.HYPERQA.NUTANIX.COM is available on the network and that the virtual
desktop Win7VMSF is shut down.
Please help on resolving this GetVMState issue.

Hi Krishna,
Thank you for posting in Windows Server Forum.
When you are configuring RDVH initially, please see that you have meet prerequisites. Remember that you need these pre-requirements:
• Database based on SQL Server 2008 R2
• Static IP Address for all Broker
• Round Robin DNS
• All RD Broker must be members of AD Windows Group (es. RDCB Server Group)
• The group must be insert into SQL Server as sysadmin ONLY for the DB creation. After that DB will be created give the db_owner permission only for their DB
More information.
Windows Server 2012 R2: Unable Add New VDI Template
In addition, we need all RD Broker must have the same SQL Native Client as main SQL Server (es. SQL Server 2012 SP1). The Connection Broker server's computer account MUST be a member of the local administrators group on the Virtual Host (RDS Host) machine and
then reboot the server. Finally check the result.
Windows Server 2012 Virtual Desktop Template Issue
Hope it helps!
Thanks.
Dharmesh Solanki

Apex Collection Saving Issue

Let me start out by saying that I'm new to the idea of using a collection in Oracle/Apex instead of straight DB work. That being said, I know the purpose behind it, and I believe the general idea of how to set it up and use it. That being said, I currently have an issue that I can't figure out.
I'm working on trying to fix a program that was built by someone else who is no longer here, and they are using a collection to store data temporarily until the remainder of a survey is saved, which it then copies everything over to the database.
I follow how the collection is created, how it is updated, and saved at the end. What I can't follow is that It is only saving part of the data when it is in IE, and NONE of the data when it is in Firefox.
What I had done was I copied the regions from the other pages that are being used once a survey had already been created (yes, the pages are separate not by my design but it's too late to try and fix all of the current problems AND merge all the pages together. That'll be the next release, but I digress). Now I checked (and made a backup of the page thankfully) and as far as I could tell, copying the regions and items from the other page should have worked just fine since they were using the same item names. Sadly however, it stopped saving relapses.
I checked an old version of the system, and I found the reason why. The version I am working on was apparently using the normal naming conventions of P86_RELAPSE_ID, etc, where it should have been P86_C001, etc. So, I went about the task of renaming (and updating the JavaScript that was running the page) all of the items. Well, I tested the system after only about 16 items and it saved perfectly! I was so happy. I started to apply the same changes to a few more, and the items I changed did not save. I checked and everything is setup correctly (item names, item settings, etc) so they should save the exact same way.
So, I tried opening it in Firefox so that I could keep items side-by-side while I am comparing them, and I noticed that none of the data when I "saved" a collection was staying in Firefox, but it would "save if I did it in IE.
I'm completely stumped at this point. Any help would be extremely appreciated. Thank you.
(PS: I'm sorry if what I am asking isn't too clear. I'm asking two things. First, why aren't items that are setup exactly the same, and the names all match the update and add data for the collection, saving to the collection, while others are? And the second question, is why isn't anything saving using this method in Firefox.)

The problem seems to have worked itself out.

Editable issues in sap interactive adobe form

Hi Experts,
we are using AdobeLiveCycle designer to create the pdf form out of sap. After creating the form to interact with sap.
When we execute the program automatically pdf will download the particular folder. In that pdf form is not an editable mode at the time. And it will change the editable mode on next day.
so, please suggest the solution to close the issues.
The following error message occurs when opening this form in Reader and attached screenshot also.
"This document enabled extended features in adobe reader the document has been changed since it was created and use of extended features is no longer available. Please contact the author for the original version of this document "
Regards,
Satheeshkumar.M

Hello Satheesh
Is this issue resolved ?
Also mark this Discussion with a Correct Answer and Helpful Answer where appropriate.
See http://scn.sap.com/community/support/blog/2013/04/03/how-to-close-a-discussion-and-why
Even if you discovered the solution without any outside contributions, it helps others to understand what the solution turned out to be
Regards
Sandy

Automatic Intercompany Payment/Collection postings Issue

Hi All,
We have an intercompany scenario where we need to make actual payments between two company codes: Both the Company Codes are in SAP and in Same Client.
1) Intercompany receivables in company code A matching payables in company code B.
2) Payment run in company code B generates a payment from company B to company code A.
3) This payment run is supposed to create 2 idocs, 1. Out bound Idoc in Company B 2. Inbound Idoc. Which triggers a Posting (Dr. Bank Transitory Cr. Interco. Customer)
I am able to generate the Outbound Idoc through F110 (Payment Run). But inbound Idoc. is not getting generated in Company A. I managed to post an incoming payment advice IDOC using the test tool WE19. I just copied the outbound IDoc changed the sending / receiving ports etc, and changed the direction field in the control record- it posted without problems.
Necessary settings have been maintained in WE20, OBCA and OBDG and also in the Posting Rule. But I am still not successful in creating an incoming idoc. through F110.
WE20- Message Type REMADV & IDoc Type used is PEXR2002.
kindly share the details
Thanks & Regards,
Vikram K

Dear:
I guess you trying to tell that your company code deals with a customer A who
is your vendor B and that you want to set off your receivables
against dues owed by you? If yes then please proceed as under
I assume that your company code is yet to collect 600 $ from customer A
whereas you owe 800 $ to vendor B.
In customer master (control data screen), activate
a check box called vendor (T Code:FD02 or XD02)
Similarly, activate the check box called customer in the vendor master
screen(T Code :FK02 or XK02)
By doing so you have let SAP system know that your
customer A is also vendor B. You have done this at client level and this
relationship applies to all company codes dealing with customer A and vendor
B which is your basic requirement.
Now move on to the company code section of your customer master ( T code
FD02 or XD02) and activate a check box called clearing with vendor. Do the same thing with
your vendor master (T Code FK02 or XK02) and activate a check box called clearing
with customer.
This means that your company code wishes to set off receivables from
customer A against dues payable to your vendor B.
In F110 now you would be paying 200 $ to vendor B.
Hopefully this will resolve your issue.
Regards

Automatic data collection evaluation issue

We are currently evaluating several automatic data collection applications that we are planning to integrate with our Oracle Applications --- got most of the RFQ constructed using this template, http://www.highjumpsoftware.com/adc/Vertexera062503/
but we want to make sure that all the system integration issues have been accounted for.
Does anyone have any success stories/horror stories about integrating automatic data collection products with the ERP system
Thank you!

cfhttp is a good place to start.

COllection Editing Issue

Similar Messages

Maybe you are looking for