Collection ID in DBAcockpit connection
Hi
Could anyone please help me on how to find out the SSID and collection id to setup the DBACockpit connection in solution manager for SLT which is on DB , DB2 LUW 10.1 .
Please find the below screenshot .
Regards
Bala
Hi Bala,
PLs refer below notes
1405712
DBA Cockpit: Database connection wizard fails for DB2, DB4
1265134
DBA Cockpit: Connecting a remote database
1267189
DBA Cockpit: DB2 for LUW as Remote Database
924138
DB2-z/OS: Database monitoring of remote DB2 systems
Regards
K.N
Similar Messages
-
Hello,
We have a 2012 r2 server running RDS publishing a number of RemoteApps.
When we go to the Server Manager and drill down to the Remote Desktop Services area we are seeing a number of the sections that will not display their information and we can no longer manage RDS via Server Manager.
Starting at Server Manager\Remote Desktop Services\Overview the "Deployment Servers" window shows a red banner with "Could not refresh the list of servers"
Going to the Server Manager\Remote Desktop Services\Collections, all three of the windows, Collections, Host Servers, and Connections will eventually display the similar type of error message, stating to check the status of the services for Remove Desktop
Connection, Windows Remote Management and Windows Internal Database.
The server is fully patched, event logs don't show anything of note.
We've rebooted the server and confirmed all those services and all "Remote Desktop *" services are running.
We're still able to access the RDWeb instance to use the published applications.
This had been working previously, not sure when it last was though as we don't always go into Server manager. We can manage the remoteapps via powershell, but are curious why Server Manager no longer functions.
Any assistance would be greatly appreciated.
thanks...Hi,
Please check whether your RD Connection Broker is member of “Windows Authorization Access Group” under ADUC and then verify the result. If possible restart the server. Also check whether you have properly setup SQL server for database access. Apart
recheck the related services detailed in error, must be running. This is only needed if the Domain the system is connected to was setup with as Pre-Windows 2000 Compatible.
http://support.microsoft.com/en-us/kb/331951
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I have a form that I want to use to collect peoples information with a submit button. I am trying to get the data that gets inserted to be added to an existing excel doc when the submit button gets hit, the form then resets and someone else can fill in the same form, hit submit and his data gets added to the existing data in the same excel doc. It is basically the same as the 'collecting response' option but without having to be online. The form is going to be used at a boat-show and I am going to get people to fill it out on an iPad. Does anybody know if this is possible?
You could connect a bunch of 3700s to each computer and do this .
Or...since you're the one who monitors the monthly limit, you could restrict an individual's internet access once you see that you guys are coming too close to the cap.
I don't work for Cisco. I'm just here to help. -
DBACOCKPIT Connection for SAP systems with SAP Router
Hello!
We are trying to integrate all the remote SAP systems and their databases (primarily Oracle) into DBACOCKPIT of SAP Solution Manager 7.1.
Our SAP Solution Manager is running on Windows with Oracle 11.2.0.2
The most SAP systems (Unix and Windows) can only be reached from SAP Solution Manger over the SAP Router connection.
It means no direct ping from Solution Manager server to the Server of managed system will work.
Question
Is it possible to integrate such SAP systems (with SAP Router) into DBACOCKPIT of Solution Manager?
According to sap note 1265134 only the DBCON-connection will be required.
By doing so (tcode SOLMAN_SETUP), we get TNS errors.
Do we miss some additional steps (adapting tnsnames.ora of SOLMAN with the entry of managed system), etc.?
Thank you!
regardsSAP-SDN wrote:
> We of course can reach these systems via SM59.
>
> The question still is whether or not the several SAP systems with Oracle that can be reached from Solution Manager over SAP Router can be integrated into DBACOCKPIT of SAP Solution Manager in order to gather/ analyze performance data?
Systems can be reached via SM59, then what's the problem ?
In fact, this 'is' the standard procedure. This is as normal as you could have Solution manager in same 'network' with rest of the remote systems.
Answer should be yes, you can manage several remote sap systems from sap solution manager dbacockpit.
Thanks -
Hi,
We have an Office 365 environment which is linked to our on premise ADFS environment. We have started to make some deployments of sites to our SharePoint Online environment. For the majority of sites this is great and the ability to access the sites
from anywhere is a real bonus. However, there are some sites and data that I would be much more comfortable in migrating to SharePoint Online if there were a way to make them only accessible via users/computers connected to the corporate network.
I have seen articles in how you can configure ADFS to allow all connections to the Office 365 tenant only from the network or not but what I am after is something which can be configured on a site by site basis (i.e. not the whole Office 365 environment
or SharePoint Online environment) to only allow access when connecting from the corporate network.
Any advice/help would be much appreciated?
Many thanks
PaulHi,
This is the forum to discuss questions and feedback for Microsoft Office, the issue is more related to SharePoint online, I recommend you post your question to the Microsoft Office 365 Community Sites and document sharing Forum
http://community.office365.com/en-us/f/154.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Thanks
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]" -
Unable to setup DBAcockpit connection in managed System Conf.
Hi Guys,
I am trying to set up DbaConnection in managed System Conf for local solman system.
Its Showing red status and also the fields are not changeable now.
I am on kernal 720 level 300.
error shows the No DBSL lib found and gives the note number 1458291.
I have already downloaded the latest verion of dbsl (324) and extracted in C:\usr\sap\PDI\SYS\exe\uc\NTAMD64.
I have already applied the note 1604209 but still the same error.
i am solman 7.1 sp06 with MSSQL 2008 R2.
Please advice how to proceed.
ThanksHi,
Please kindly check in 'Agent Administration' if SMD Agent is running and
conected to SolMan if you can't see the Agent please check if it is
visible in SLD, if it is please connect it to SolMan and then run
setup again. Otherwise please uninstall SMD Agent and install it again
conecting it directly to your SolMan using HTTP Connection via Message
Server.
You may want to refer to the 'Diagnostics Agent Setup Guide' available at
https://service.sap.com/diagnostics should be very helpful.
As per the mentioned note: Please refer to SAP note 1232928
You switch to the DBA Cockpit that has the authorizations to
configure the back end, and you uninstall the back end there. You can
then reinstall the back end in the new instance.
You can see on "Screen Performance -> Performance Warehouse ->
Configuration" which DBA Cockpit currently has the authorizations to
change the back end. The SAP system ID of the relevant DBA Cockpit is
specified there in the line for the "Monitoring DBA Cockpit".
You need to switch to the dba cockpit that has authorizations to
change the backend system then uninstall the backend, and then you can
do this configuration step without the above error.
Hope this helps.
Cheers
SH -
DBA COCKPIT IS NOT CONNECTED IN MANAGED SYTEM
hi
unable to connected the manged system dba cockpit from the solman7.1 sp10. i have attached the screen shot. please can any one guide me how to
solve the issue. it was given error db connection not established.
regards
vreddyHi Experts,
I am not able to turn the step 5 to green Dbacockpit connection.
Error message:
The DBACockpit connection can not be established
The DB extractors for collecting DB Performance data will not be activated.
Error during SQL script execution. Start DBACOCKPIT and re-run manually.
When i run the script manually from DBACOCKPIT. it throws the error attached in
Your help to resolve the below issue highly appreciated.
Regards
Ravi Pandey -
Hi Everyone,
I am getting an error message: An error occurred while trying to connect to a web service, when my InfoPath form tries to load. The last few days, it only spits this error message in the morning and around 12pm-1pm it resolves itself and the form loads
fine the rest of the day, oddly enough.
A few things about my form:
1). It is web enabled
2). The form submits to a form library on the SP server
3). I use the UserProfileService data connection in the form to auto-populate a few fields
4). I use a udcx file with correct language stored in the root of the site collection in the data connection library
5). The form has been working fine until a few days ago
I noticed while in Central Administration, that the User Profile Service Synchronization is Stopped. Not sure if this is causing some or all of the problem. If I need to start it I will need to contact my farm administrator to do this, since I do not
have the service account information.
Also, I looked thru the log files on the SharePoint server and found the following by searching for the Correlation ID shown when the error comes up, I won't put in everything just the important messages.
Schema file was already loaded: BuiltInActiveXControls.xsd
FormServer Partial Trust - Proxy operation invoked in the SHIM process.
FormServer Partial Trust - Invoking proxy operation for Web service adapter failed with exception Operation is not valid due to the current state of the object. for Url=https://<SP URL>/_vti_bin/UserProfileService.asmx
Data adapter failed during OnLoad: The custom code in the form cannot be run. This functionality may be deactivated on the server. For more information, contact the server farm administrator.
The following query failed: GetUserProfileByName (User: , Form Name: Expense Report, IP: , Connection Target: <SP URL>/Data Connections/GetUserProfileByName.udcx, Request: , Form ID: urn:schemas-microsoft-com:office:infopath:Expense-Report:-myXSD-2014-04-11T21-06-32
Type: DataAdapterException, Exception Message: The custom code in the form cannot be run. This functionality may be deactivated on the server.Hi B.,
You are on the right track. I recommend that you first get the User Profile Synchronization Service started because that itself could be the root cause of the issue.
If that doesn't fix it then focus your attention on the GetUserprofileByName data connection. I always use my secure store ID for this connection. I add the ID by editing the udcx file and then publishing it again.
Hope this helps.
Daniel Christian (MCTS) -
I created a project . the 4 packages uses same project connection to the ole db, and each has a package connection to the excel file it is supposed to import from c drive. the packages works well on the ssis platform and imports it into the engine, but when
used in sql server agent service, it does not work and gives the error below.
Executed as user: USER-PC\SYSTEM.
Microsoft (R) SQL Server Execute Package Utility
Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved.
Started: 11:50:16 Error: 2015-01-08 11:50:16.29 Code: 0xC001000E
Source: Package Description: The connection "{D16EBEF0-87BB-4062-8512-0844538E99F5}" is not found.
This error is thrown by Connections collection when the specific connection element is not found.
End Error Error: 2015-01-08 11:50:16.34 Code: 0xC001000E Source: Package
Description: The connection "{D16EBEF0-87BB-4062-8512-0844538E99F5}" is not found.
This error is thrown by Connections collection when the specific connection element is not found.
End Error Error: 2015-01-08 11:50:16.34 Code: 0xC004800B Source: Data Flow Task SSIS.Pipeline
Description: Cannot find the connection manager with ID "{D16EBEF0-87BB-4062-8512-0844538E99F5}"
in the connection manager collection due to error code 0xC0010009. That connection manager is needed by
"OLE DB Destination.Connections[OleDbConnection]"
in the connection manager collection of "OLE DB Destination". Verify that a connection manager
in the connection manager collection, Connections, has been created with that ID.
End Error Error: 2015-01-08 11:50:16.34 Code: 0xC0047017
Source: Data Flow Task SSIS.Pipeline
Description: OLE DB Destination failed validation and returned error code 0xC004800B.
End Error Error: 2015-01-08 11:50:16.34 Code: 0xC004700C
Source: Data Flow Task SSIS.Pipeline
Description: One or more component failed validation.
End Error Error: 2015-01-08 11:50:16.34 Code: 0xC0024107 Source: Data Flow Task
Description: There were errors during task validation.
End Error DTExec: The package validation returned DTSER_FAILURE (1)
i will appreciate your contributions. the project runtime is set to false as well. or do i have to do that for individual packageDid you change the deployment type to package recently?
+1
Since you can see the errors in the job history, it means you scheduled the package like in the package deployment model, i.e. without using the catalog. Like this, you cannot use project connections.
MCSE SQL Server 2012 - Please mark posts as answered where appropriate. -
SSIS package Corrupted - Connection element is not found - Visual Studio 2008
Some body help me...
last week my senior give me a SSIS package, but when I open in visual studio 2008 there is pop up like this.
TITLE: Microsoft Visual Studio
There were errors while the package was being loaded.
The package might be corrupted.
See the Error List for details.
BUTTONS:
OK
and this is the description of
Error 1 Error loading KIBB_INVC_IS.02.dtsx: The connection "{A9C72380-F326-44BF-A7CB-B8C7E9103F01}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
C:\Users\CYH\Documents\Visual Studio 2008\Projects\IS\IS\KIBB_INVC_IS.02.dtsx 1 1
Error 10 Validation error. SheetValue Insertion Error Log Execute SQL Task: Connection manager "{A9C72380-F326-44BF-A7CB-B8C7E9103F01}" does not exist. KIBB_INVC_IS.02.dtsx 0
0
Error 11 Validation error. SheetValue Insertion Error Log : There were errors during task validation. KIBB_INVC_IS.02.dtsx 0 0
Error 12 Validation error. Data Flow Task: SCB_IB_IDS 05: The connection "{A9C72380-F326-44BF-A7CB-B8C7E9103F01}" is not found. This error is thrown by Connections collection when the specific connection element
is not found. KIBB_INVC_IS.02.dtsx 0 0
if some body know this problem, please help me to resolve my problem :(It is due to a connection manager being deleted.
Oftentimes fixable by introducing it back. Sometimes the package even runs successfully even w/o it.
But if you can create a new package anew.
Arthur My Blog -
SSMA for Oracle 6.0 Cannot connect to Oracle DB reporting "table or view does not exist"
SSMA For Oracle v6.0.0
MS SQL Server Enterprise 64bits v11.0.3000.0
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Symptom:
when connecting Oracle, it reports error "Common Requirement: User does not have required permissions". Then it reports error: "Error occurred while collecting data."
The following is log:
[Generic: Mandatory] [1500/1] [2015-03-03 04:19:29]: SQL Server Migration Assistant for Oracle v6.0.0
[Generic: Mandatory] [1500/1] [2015-03-03 04:19:29]: Starting assembly: SSMAforOracle, Version=6.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Created: 7/22/2014 4:42:22 PM
Last Modified: 7/22/2014 4:42:22 PM
OS Version: Microsoft Windows NT 6.1.7601 Service Pack 1
OS architecture: x64
Processor architecture: AMD64
Current culture: en-US
UI culture: en-US
[Collector: Mandatory] [1500/4] [2015-03-03 04:20:04]: Oracle connection provider: OracleClient.
[Collector: Mandatory] [1500/4] [2015-03-03 04:20:04]: Oracle connection mode: Standard.
[Collector: Mandatory] [1500/4] [2015-03-03 04:20:06]: Oracle server version: '11.2.0.3.0'.
[Gui: Error] [1500/4] [2015-03-03 04:20:12]: LowLevelAdapter.ReadSource : Read Source error: Microsoft.SSMA.Framework.Generic.Collectors.CollectorException: Error occurred while collecting data. ---> System.Data.OracleClient.OracleException: ORA-00942: table
or view does not exist
at System.Data.OracleClient.OracleConnection.CheckError(OciErrorHandle errorHandle, Int32 rc)
at System.Data.OracleClient.OracleCommand.Execute(OciStatementHandle statementHandle, CommandBehavior behavior, Boolean needRowid, OciRowidDescriptor& rowidDescriptor, ArrayList& resultParameterOrdinals)
at System.Data.OracleClient.OracleCommand.ExecuteScalarInternal(Boolean needCLStype, Boolean needRowid, OciRowidDescriptor& rowidDescriptor)
at System.Data.OracleClient.OracleCommand.ExecuteScalar()
at Microsoft.SSMA.Framework.Generic.DbUtilities.SsmaDbCommand.ExecuteScalar()
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.ExecuteScalarToInt(IDbConnection connection, String text)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.GetCountForExcludedSchemas(IDbConnection connection, IEnumerable`1 excludedSchemas, Int64 version)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.CountObjects(IDbConnection connection, Int64 serverVersion, OracleCollectionFilter filter, Set`1 excludedSchemas)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.CollectDataIntoMetabase(XMetabase xMetabase, IDbConnection connection, Int64 serverVersion, OracleCollectionFilter filter, IUIProgressBarProvider progressBarProvider, IUIStopOperationProvider
stopOperationProvider, ICollectionContext context)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.CreateMetabaseAndCollectData(IDbConnection connection, String xmlConnectionParameters, XNode xFilter, IUIProgressBarProvider progressBarProvider, IUIStopOperationProvider stopOperationProvider,
ICollectionContext context)
--- End of inner exception stack trace ---
at Microsoft.SSMA.Framework.Generic.Workspaces.Default.MetabaseWorkspaceItem.Connect(String connectionParameters, SecureString password)
at Microsoft.SSMA.GUI.Product.OracleToMsSql.LowLevel.AppConnectToSourceOracle.ConnectToSourceStart(Object guiContext)
[Gui: Error] [1500/4] [2015-03-03 04:20:12]: Exception: Error occurred while collecting data.
site: Void Connect(System.String, System.Security.SecureString)
source: Microsoft.SSMA.Framework.Generic.SSMAEnvironment
at Microsoft.SSMA.Framework.Generic.Workspaces.Default.MetabaseWorkspaceItem.Connect(String connectionParameters, SecureString password)
at Microsoft.SSMA.GUI.Product.OracleToMsSql.LowLevel.AppConnectToSourceOracle.ConnectToSourceStart(Object guiContext)
[Gui: Error] [1500/4] [2015-03-03 04:20:12]: Inner Exception #1: ORA-00942: table or view does not exist
site: Void CheckError(System.Data.OracleClient.OciErrorHandle, Int32)
source: System.Data.OracleClient
error code: -2146232008
at System.Data.OracleClient.OracleConnection.CheckError(OciErrorHandle errorHandle, Int32 rc)
at System.Data.OracleClient.OracleCommand.Execute(OciStatementHandle statementHandle, CommandBehavior behavior, Boolean needRowid, OciRowidDescriptor& rowidDescriptor, ArrayList& resultParameterOrdinals)
at System.Data.OracleClient.OracleCommand.ExecuteScalarInternal(Boolean needCLStype, Boolean needRowid, OciRowidDescriptor& rowidDescriptor)
at System.Data.OracleClient.OracleCommand.ExecuteScalar()
at Microsoft.SSMA.Framework.Generic.DbUtilities.SsmaDbCommand.ExecuteScalar()
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.ExecuteScalarToInt(IDbConnection connection, String text)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.GetCountForExcludedSchemas(IDbConnection connection, IEnumerable`1 excludedSchemas, Int64 version)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.CountObjects(IDbConnection connection, Int64 serverVersion, OracleCollectionFilter filter, Set`1 excludedSchemas)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.CollectDataIntoMetabase(XMetabase xMetabase, IDbConnection connection, Int64 serverVersion, OracleCollectionFilter filter, IUIProgressBarProvider progressBarProvider, IUIStopOperationProvider
stopOperationProvider, ICollectionContext context)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.CreateMetabaseAndCollectData(IDbConnection connection, String xmlConnectionParameters, XNode xFilter, IUIProgressBarProvider progressBarProvider, IUIStopOperationProvider stopOperationProvider,
ICollectionContext context)Hi Airings,
'ORA-00942: table or view does not exist'
According to the error message, it seems that the migrating table or view does not exist in the database, or SSMA does not have access to it. To troubleshoot the issue, please check the following things.
1. Verify that if the spelling of the table or view name is correct.
2. If the table or view exists but is in a different schema from the current schema where the SQL is executing (in other word, the table doesn’t own by you, but owned by other user), the ORA-00942 error will return too. Resolve this by
explicitly reference the table or view by specifying the schema name (schema_name.table_name).
3. SSMA queries some additional catalog tables that you may not have permission to, please make sure that you grant the account permission to
read sys.mlog$. For more details, please review this similar thread:
Bug in SSMA For Oracle 6.0 for non-dba Oracle user.
Reference:
ORA-00942 Table or View Does Not Exist Oracle Error
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support -
Unable to collect universe information
We have installed Information Steward 14.2.1.220
I have created a Integrator to collect information on BI4.1 environment, when the integrator is scheduled, run is successful and universe information is not loaded to database tables.
Following distinct warnings/Errors are raised.
1. [W] 2014-05-22 08:41:00.018 Unable to collect universes.java.net.SocketException: Connection reset (CMM-10273)
2. [E] 2014-05-22 08:41:22.341 Universe [/Universes/eFashion]. Failedto collect metadata for Universe Unknown Error : eFashion (CMM-10117)
3. [W] 2014-05-22 08:41:59.641 WebI document [Web IntelligenceSamples/Mobile Samples/Input Controls & Filter Demo]. Unable to establish Universe Object relationship. Class [Store] does not exist inuniverse [eFashion]. (CMM-10077) (CMM-10074) (CMM-10130)
Note:
1. No extra content is developed in this environment only default
universes and reports along with installation are present in system.
2. Administrator user is used to configure Integrator.
3. Also tired to add some universes and reports and same errors/warnings while running the integrator.
Environment Information:
Business Objects:
SAP BusinessObjects BI Platform 4.1 Support Pack 2 Patch 3
Version: 14.1.2.1216
Information Steward:
SAP Information Steward Version: 14.2.1.220
Can someone help me in fixing these issues.
Thanks,
Suresh.Hi Suresh,
As per the log you attached, the following i understood,
1. Unable to collect Universes - Due to Connection Reset
2. Failed to collect metadata of Universe eFashion
3. Webi Document - Unable to define relationships with Universe - Due to Class is not exists in Universe
And you clearly mentioned that, nothing new developments are there in BI system and you used Administrator account to extract the metadata.
Suresh, you please do the following tests, which will help you to fix the issue:
Log in to IS Server, where you installed the Metadata Integrators,
1. Try to access the Universe eFashion from IDT / UDT tool
2. Perform Integrity Check on Universe (especially check the Connection Test is passed or not)
3. Check the Business Layer of eFashion Universe, whether all the classes are exists or not
4. Open the eFashion related WebI document in Rich Client and run the report to check whether the report is running or throwing an error.
These test will help you to find the root cause for the above issue.
Thanks,
Ramakrishna Kamurthy -
Trouble Downloading Dylan Collection
Every time I attempt to purchase "Bob Dylan: The Collection," the following error pops up after about 10 seconds:
"Could not purchase Bob Dylan: The Collection. The network connection was lost. There was an error in the iTunes store. Please try again later."
Any ideas? Thanks beforehand.Did you modify the download location? I would recommend removing the Adobe Download Manager, refreshing the Master Collection download page, and then initiate the download again. This time choosing the default options for save location.
-
OMBPLUS - Setting properties of objects in Collection.
Hi All,
I am trying to set the Deployable property of objects in a collection in order to automate our deployment process. Basically, we use collections for our releases, and I want to set the property as above before running our deployment script which looks for objects that are marked as deployable.
see below my attempt at this:
#logging file
set OMBLOG C:\\CORT_BAUV_13\\OMB\\omblog.txt
set fParams [open Params.lst r]
gets $fParams OwbUsername
gets $fParams OwbPasswd
gets $fParams Hostname
gets $fParams Port
gets $fParams Database
gets $fParams StgUsername
gets $fParams OdsUsername
gets $fParams ClnUsername
gets $fParams DwhCrtUsername
gets $fParams DwhLdwUsername
gets $fParams CtlUsername
gets $fParams DwhAdmUsername
gets $fParams Passwd
gets $fParams resetAll
gets $fParams Collection
close $fParams
#REPOSITORY CONNECTION
set reposConnection $OwbUsername/$OwbPasswd@$Hostname:$Port:$Database
#CONSTANTS
set projectName MI_HEAD
puts "Connecting to: $reposConnection"
OMBCONNECT $reposConnection
puts "Connected to Repository..."
OMBCC '/$projectName/'
OMBCONNECT CONTROL_CENTER
set dtaList [OMBRETRIEVE COLLECTION '$Collection' GET DATA_AUDITOR REFERENCES ]
puts "Resetting Data Auditors $dtaList"
foreach dtaName $dtaList {
OMBALTER DATA_AUDITOR '$dtaName' SET PROPERTIES (DEPLOYABLE) VALUES (1)
OMBCOMMIT
OMBDISC
Currrently, I get this error:
OMB01004: Current context is not an Oracle module context.
Any ideas?thanks david...
the main problem is getting the module to switch context to..
the result of the puts "Resetting Data Auditors $dtaList" is as follows:
Resetting Data Auditors /MI_HEAD/TGT_STAGE/VALID_BUSINESS_AREA_AUDIT
/MI_HEAD/TGT_STAGE/VALID_DRAWDOWN_AUDIT /MI_HEAD/TGT_STAGE_LD/VALID_LD_CONNECTION_AUDIT
the result above does show the module of each object but how do i dynamically change context to each module
i.e
foreach dtaName $dtaList {
OMBCC $dtaName
OMBALTER DATA_AUDITOR '$dtaName' SET PROPERTIES (DEPLOYABLE) VALUES (1)
i tried OMBCC$dtaName
OMBCC '..'
to get into the context of the module that holds the object, but that still did not work...
thanks,
Olu -
Pop up window occurs when assigning package in Transport Connection
Hi
After collecting objects through transport connection, when i click on Assign package button, a pop up window occurs, which says "Change package for the following Objects" and gives a list of all the objects and check boxes with it.What is the significance of this popup?...
By default i can see that some infoobjects and other objects are checked in this.But some of the infoobjects selected here are not required for my transport. When there are large number of objects
checked here, it becomes difficult to identify and uncheck the objects that are not required.
Is there a standard way to handle this popup?..or Suggest some options to overcome this...so that unwanted objects are not collected here...
Thanks in advance.I assume you want to transport your objects only. So just collect them in Transport Connection as you are doing now and make sure you have checked all required objects by you. And then just click Transport Icon (Truck). If any object from your list dont have yet package assigned, you can assign and then further collect in by giving transport number. You dont need to click Assign Package button.
Abhijit
Edited by: ABHIJIT TEMBHEKAR on Nov 17, 2008 1:13 PM
Edited by: ABHIJIT TEMBHEKAR on Nov 17, 2008 1:13 PM
Maybe you are looking for
-
Planning Level/Package names not displaying correctly in BPS0 (BI7)
We have just upgraded our BW system from 3.5 to BI7. We are running SEM 3.5. We now seem to have a display issue with the titles of some planning levels and packages within BPS0. On some planning level/package lines the display in the left hand pane
-
I already started over and partitioned twice with same result. Before I needed more space and had to allocate more gb it worked fine for over a year. Now I cant even get online wirelessly!!
-
I want to know pease, why my visa is being charged for in game purchases,even though I have plenty of money left on an iTunes / apps gift card?
-
Is there a way to hide folders from users in Project Explorer? I can set permissions on the projects themselves, but would also like to change permissions on the folders that hold them. We are using verson 4.0.2 of the Collaboration server. Thank you
-
SAPOsCol running but not working (shared memory not available)
Dear Forum, We have just set new passwords for SAP AD users (incl SAPService<SID> and <SID>adm), after this restarted SAP instances and servers / clusters). Everything came up well and all services, incl SAPOsCol started up automatically with the new