Collection in source system error

Hi,
Recently we just performed a BW SP upgrade to 3.0B level 28. During our first extraction after upgrade on production for 0HR_PY_1 (Payroll Data) infosource, we encountered a message "Collection in source system ended".
Anybody has any clue about the cause and how to go about resolving it?
Thanks.
Best regards,
Taly

hi Taly,
datasource need to be replicated from source system (r/3) in production.
area to check -> in monitor request, menu 'environment' check job overview both bw(datawarehouse) and r/3(source system - equal to transaction sm37 - see if job cancelled and any helpful error message like sql error., from menu-environment check the same bw and r/3 for shortdump (st22), transaction rfc, ale management, system log(sm21) and so on, please let's know what's your finding there, possibly source system problem with that message, may ask basis for help. hope this helps.

Similar Messages

Collection in source system ended-Process chain error

Hi friends,
I have got a PC which failed due to error : Collection in source system ended.
My flow of PC is .
start--
       --Load IP 1
      ---Load IP2
      _--load Ip 3
Load IP4
      ---Load Ip 5.
I got this error at IP2 and so my pc fail .
can i manually upload this IP2 and make the process chain OK?
what are the steps involved in rectifying this?
regards,
siddartha

First try to find out the reason for the load failure. Once you fix this, do a manual run of the infopackage and when successful you can continue with the rest of process chain.
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.

Loading and with error message :COLLECTION in SOURCE SYSTEM ENDED

Hi,
Facing problem with master data object while loading and with error message :COLLECTION in SOURCE SYSTEM ENDED
This load is getting failed every day. It is a full load and records are getting transferered and added.
when we check in details tab in RSMO all data packets in processing is green but in extraction some of the data selection scheduled are in yellow.We are changing QM status to green as records are added.
Version i am using is BW 3.5
Please let me know what will be the problem???
Thanks,
Edited by: lokesh thonsyd on Feb 18, 2009 8:55 AM

First try to find out the reason for the load failure. Once you fix this, do a manual run of the infopackage and when successful you can continue with the rest of process chain.
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.

Collection in source system ended

Hi Experts,
Need your help on the below issue.
Due to error at R/3 the status of my load for one of the
infosource is YELLOW with
status: Collection in source system ended.
The Request (REQU_4CXV37IJY08OX4UVF4YCPREAR) in R/3 under SM37 is Completed successfully.
BUT in BW
In the Details tab of Monitor all the 4 steps are green( 1. Request , 2.Extraction , 3.Transfer , 4.Processing)
EXCEPT ---> 2.Extraction
The Extraction step is as follows
( Yellow ) Extraction (messages) : Errors Occured
        Data Request received
        Data Selection Scheduled
        (Yellow) 9157 Records sent ( 9157 Records received)
Waiting for your response.
Thanks,
Veeru.

Hi Krishna ,
Thanks for faster response.
I checked the log in R/3 it has finished successfully
Below is the log
Note : the records recieved in BW is exactly equal to the no records show in the R/3 request log below.
LOG OF JOB IN R/3
Job started
Step 001 started (program SBIE0001, variant &0000000057813, user name BWALEREMOTE)
DATASOURCE = ZBW_MDRS_V
          Current values of selected profile parameter                *
abap/heap_area_nondia......... 2000683008                              *
abap/heap_area_total.......... 2000683008                              *
abap/heaplimit................ 40894464                                *
zcsa/installed_languages...... E2                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 64                                      *
ztta/roll_area................ 6500000                                 *
ztta/roll_extension........... 2000683008                              *
0 LUWs confirmed and 0 LUWs to be deleted with FB RSC2_QOUT_CONFIRM_DATA
Call up of customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 9,157 records
Result of customer enhancement: 9,157 records
Call up of customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 9,157 records
Result of customer enhancement: 9,157 records
Asynchronous sending of data package 000001 in task 0002 (1 parallel tasks)
Through selection conditions, 0 records filtered out in total
tRFC: Data package = 000001, TID = 0AB80A0D6ADB49A37D4F558D, duration = 00:00:10, ARFCSTATE =
tRFC: Begin = 24.02.2009 12:53:35, End = 24.02.2009 12:53:45
Job finished
Do u still think tht i should turn it to red and repair?
If yes wts the steps can you please tell me.
Thanks,
Veeru.
Edited by: Veerendra Kumar on Feb 24, 2009 12:57 PM
Edited by: Veerendra Kumar on Feb 24, 2009 12:57 PM

Source system error - RFC connection failed

Hi Gurus,
I have installed ECC6 on my PC but not when i am trying to created the DS its not allowing me its saying appl comp hierarchy for source susyem "T90*" doesnt not exist.
so tried going to source system -> done a check for my source system then i got the following errors
Source system "T90*" is inactive
Entry in outbound table not found
Entry in inbound table not found
Basic type does not exist
Check failed for RFC connection T90CLNT090 ; check destination
can any one tell me how to fix this issue?
Regards,
Ravi

Hi Ravi,
Did you run appication component hierarchy in source system(TX-RSA9)
then activate your data source
then replicate in BW system.
Check here for BW connectivity with source system.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bi/stepbyStepBusinessIntelligence
Thanks,
Vijay.

Transporting 0material_attr gives reference source system error...

Hi Experts,
I know its not recommended but for some reasons we were trying to move 0material_attr data source and transfer rules and transfer structure 0material_attr_ba from quality system (QAS) to Development system. And every time we are getting the error "Source system QAS does not exist" while importing the request in DEV.
The reason for this error is that it is still keeping the reference source system of quality as QAS which is not there as logical system in DEV. My question is isn't it should automatically refer to R/3 DEV when imported to development system.
Thanks
Vishal

Hi,
As pointed out by Joke in the previous post, you need to maintain the mapping of logical system name for transportation.
In Dev, go to RSA1> Tools--> Conversion of logical system names.
Here create new entries.
Your Original Source System would be the QAS Logical System Name & Target Source System would be DEV Logical System Name.
Once entry is saved, re-import the transport request and check.
Hope this helps!

Source System Error While transporting

Hi SDN,
We are transporting requests to a deployment test box SN1 and we are getting this error message while we never got this error message transporting to QAS and in QAS we did not need to create DEV010 as a source system - setting up RFC connection was sufficient.
Any thoughts?
===========================================================
Source system DEV010 does not exist
Message no. RSAR409
Diagnosis
Source system DEV010 is not known.
System response
The imported data for data source 8ZM_C42 was deleted again as the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP to an available productive source system.
Procedure
Create the referenced source system in the Administrator Workbench or define a mapping to a known source system in table RSLOGSYSMAP.
You get to the maintenance using Tools -> Conversion of the logical system names.

Speak to your basis team and ask them to make entries in table:
RSLOGSYSMAP .
Are you trying to transport info source or any source system dependt object? If so, this error is understandable.
This has been discussed several times and pl search the forum.
Ravi Thothadri

Create Source System - Error

Hi Gurus,
I have to create a conexion with R3 so i did :
1)Create RFC Conexion in SM59
2)Create Source System in RSA1
But in the last step of the creation Source System in RSA1 shows up the following Error Message:
"The source system already exists"
So i checked in the source system list, and it does not exists.
Can anyone help me about this?
THANKS A LOT !!!

Hmm.. not very good over here.. but can you dubleclick and see if they are leading to different clients or not?
I think they are 2 different clients of the R3's .. so this should be posible..
Did you created a new logical system and new RFC destinations for this new one?
May be that it is pointing out to the existing destination..
regards,
Hari

Source System Error

Hi Experts ,
I have to create a source system for Production server in BW Ides .
My Production server client 999 , It is assigned to Logical system CL999.But CL999 Uses a RFC Destination to support place so it could not be changed .
So i created own logical system LSYS999 . And created a RFC Destination to BW and used that in Port .But my Logical system is not assigned to client.
If i check My RFC connection on both sides it works fine.
The source system is also created in BW , RSBASIDOC Table also has Active state.
I created a generic data source in Production Server , Replicated in BW , It also came.
Now the problem is when i assign Data source to info source , During Activation the following error comes
<b>Error in source system CL999</b>
Message no. RSAR502
Diagnosis
With Remote Function Call to system CL999 error Function module "<b>RSAOU_BWBC_GET</b>" not found. ccurred.
Procedure
Remove the cause of the error.
How to solve this .....Awaiting for your great response
Regards
Shiba

Hi,
please go in rsa1 onto the relevant source system and press "check". I assume that the connection is not fine. This will help you to get some more detailed information.
Follow the protocol.
hth
cheers
sven

Source System Error in BW

Hi,
RSA1-->Source System...context menu and check
I am getting the following error
Result of the destination check: No authorization to log on as a
trusted system (Tr usted RC=1).
how shall i proceed
Thanks

hi Krishna,
check SM59 for RFC destination used for that source system, normaly the same name used.
try to check 2nd tab 'logon/security', check option for 'trusted system', try to change to 'No'.
you may need basis assistance.
hope this helps.

Source System Error for 0Material_Attr

Hi Gurus,
I have New BI System, when i m loading 0Material_Attr, the whole data is coming but with the status Red. May b the error is with source system. I checked in PSA maintenance and the error detail in source system is mentioned below.
"Value 'A3000014500L ' for characteristic 0MATERIAL is in external format"
"0MATERIAL : Data record 1 ('A3000014500L '): Version 'A3000014500L ' is not valid RSDMD 194".
for detail error check the link below
https://docs.google.com/document/d/1v4uHeg6Ci29zv0qJ21dOH7gttuQyg_VZsLM2IMfZEuM/edit?hl=en&authkey=CLnd8P4H
can anybody help in this regard.
Thanks in advance.
Regards
Manna Das

Hello Manna Das,
0Material has conversion Exit MANT1 which converts the Material in the external format to internal format of the system.
Can you please check if the Converison exit is there?
Thanks,
Sarat

Transport collecting incorrect Source System.

Hi SDNers,
In my BW DEV i got source systems to both R3 DEV and R3 Production.
reason for this is that the data in Dev is not correct.
When i use transport connection it only transfers Source System from the R3 DEV and not R3 Prod. I need the Source System from Production and not Development. How can i force it to use Source system from Prod and not Dev.
Thanks.
Andre.

Hi
in the transport connection before collecting your objects maintain the source system assignment sceen (toolbar or Shift+F7)
hope this helps...
Olivier.

Source system Error of BI- Incorrect Unicode Settings

Hi gurus,
We are facing problems in the source system of BI 7.0,after
installation it self .
As we Click on Check for the source systen of BI it is throwing an
information .
"The unicode settings for destination BD1CLNT300 do not match the source
system."
This is leading to failure of Export Datasource creation for BI system.
and even BEx Personalisation for History.
Please Help.
Our system is having following components:
SAPABA -700-18-SAPKA70018
SAPBASIS-700-18-SAPKB70018
PI_BASIS -2005_1_700-18-SAPKIPYJ7I
SAP_BW-700-0020- SAPKW70020
BI_CONT -703-14-SAPKIBIIQ4
Please suggest the correction as per the patch Level.
Regards,
Deepak kansal

Hi Deepak
Please check below link, let me know if this doesnt help you
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6038903c-3c32-2c10-2c8b-c5bb71baab67]
-DU

Error in codepage mapping for source system. Error text:

guyz,
im facing the below issue in prod.
Error in codepage mapping for source system. Error text:
Message no. RSDS_ACCESS013
Collection in source system ended
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Inbound Processing
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
need your guidance,
cheerz,
raps.
Edited by: raps on Mar 1, 2012 9:39 AM

Hi ,
Kindly go throught the following threads for your issue resolution::
Error in code page mapping for Source System
Erroe in source system
Regards,
Arpit

Error when creating R/3 source system in BW3.5

I HAVE CREATED SOURCE SYTEM FOR R/3 TO PERFORM EXTRACTION IN BW-3.5.
AFTER I DID ALL THE BASIC SETTING LIKE CREATING LOGICAL SYSTEM AND ASSIGNING CLIENT AND CREATING RFC DISTINATIONS.
I TRY TO CREATE SOURCE SYSTEM BY RIGHT CLICKING ON SOURCE SYSTEM ROOT NODE AND SELECTED THE OPTION SAP SYSTEM FROM RELEASE 3.0D(MANUAL CREATION) AND ENTERED
RFC DISTINATION : (LOGICAL SYSTEM ID OF R/3)
LOGICAL SYSTEM NAME: (LOGICAL SYSTEM ID OF R/3)
SOURCE SYSTEM NAME: (R/3 SOURCE SYSTEM)
ERROR MESSAGE -- NO:447
BASIC TYPE ZSBA005 DOES NOT EXITS
ACTIVATION OF SOURCE SYSTEM FAILED
PLEASE HELP ME IN THIS ISSUE..
CHEERS
AMAR.

Hi,
Kindly do not type completely in CAPS.
Take a look at SAP Note 140276 to correct errors in source system assignment.
BR/
Mathew.

Collection in source system error

Similar Messages

Maybe you are looking for