Collection Status : Disabled by Upload Manager

I am getting this with ... ./emctl status agent
How do I enable the upload manager?

Look for the cause -- its either
there are too many files backlogged
there is not enough freespace on the directory
the size of the files backlogged is too large..
See the emd.properties file to override the defaults that automatically disable collection
(like too many files).
This is done as a safety precaution so that the agent doesnt fill the o/s.

Similar Messages

  • Agent Collection disabled by upload manager - how to enable it

    Hi
    I am using EM grid control agent 10.2.
    The upload is disabled in my machine.how to enable it?
    and the agent is UP for a few minutes and goes DOWN again.
    Can anyone help me on this please?
    Thanks and Regards
    C:\>emctl status agent
    Oracle Enterprise Manager 10g Release 10.2.0.1.0.
    Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
    Agent Version : 10.2.0.1.0
    OMS Version : 10.2.0.1.0
    Protocol Version : 10.2.0.0.0
    Agent Home : D:\OraHome_2
    Agent binaries : D:\OraHome_2
    Agent Process ID : 1076
    Agent URL : https://monkey:3872/emd/main/
    Repository URL : https://jpdel15da.jp.oracle.com:1159/em/upload
    Started at : 2006-05-23 15:39:15
    Started by user : SYSTEM
    Last Reload : 2006-05-23 15:39:15
    Last successful upload : (none)
    Last attempted upload : (none)
    Total Megabytes of XML files uploaded so far : 0.00
    Number of XML files pending upload : 132
    Size of XML files pending upload(MB) : 74.84
    Available disk space on upload filesystem : 60.47%
    Collection Status : Disabled by Upload Manager
    Last successful heartbeat to OMS : 2006-05-23 15:41:12
    Agent is Running and Ready
    Message was edited by:
    user457188

    I'm getting the agent collection disable message too..I have this message in the secure.log file, how are we suppose to enable it?
    The Oracleagent10gAgent service is stopping...
    The Oracleagent10gAgent service was stopped successfully.
    [30-10-2009 11:10:26] USERINFO ::Agent successfully stopped... Done.
    [30-10-2009 11:10:26] USERINFO ::Securing agent... Started.
    2009-10-30 11:10:33,099 [main] INFO agent.SecureAgentCmd secureAgent.223 - Requesting an HTTPS Upload URL from the OMS
    2009-10-30 11:10:33,208 [main] INFO agent.SecureAgentCmd secureAgent.244 - Requesting an Oracle Wallet and Agent Key from the OMS...
    2009-10-30 11:10:33,208 [main] INFO agent.SecureAgentCmd secureAgentWithOMS.359 - Performing INIT
    2009-10-30 11:10:33,240 [main] INFO agent.SecureAgentCmd secureAgentWithOMS.382 - INIT operation succeded
    2009-10-30 11:10:33,240 [main] INFO agent.SecureAgentCmd secureAgentWithOMS.390 - Performing AUTH
    2009-10-30 11:10:33,411 [main] INFO agent.SecureAgentCmd secureAgentWithOMS.411 - AUTH operation succeded
    2009-10-30 11:10:33,458 [main] INFO agent.SecureAgentCmd secureAgent.248 - Check if HTTPS Upload URL is accessible from the agent...
    2009-10-30 11:10:33,833 [main] INFO agent.SecureAgentCmd secureAgent.256 - Upload URL is accessible
    2009-10-30 11:10:33,833 [main] INFO agent.SecureAgentCmd secureAgent.260 - Checking issuer hostname in the certificate...
    2009-10-30 11:10:33,849 [main] INFO agent.SecureAgentCmd getIssuerName.563 - OMS DN: CN=csdowgrid001.cspas.kp.org
    2009-10-30 11:10:33,849 [main] INFO agent.SecureAgentCmd getIssuerName.568 - Issuer CN: csdowgrid001.cspas.kp.org
    2009-10-30 11:10:33,849 [main] INFO agent.SecureAgentCmd secureAgent.266 - Configuring Agent for HTTPS
    2009-10-30 11:10:33,911 [main] INFO agent.SecureAgentCmd main.202 - Successfully secured the Agent.
    Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
    Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
    The Oracleagent10gAgent service is starting.....
    The Oracleagent10gAgent service was started successfully.
    Agent Version : 10.2.0.5.0
    OMS Version : 10.2.0.5.0
    Protocol Version : 10.2.0.5.0
    Agent Home : D:\OracleHomes\agent10g
    Agent binaries : D:\OracleHomes\agent10g
    Agent Process ID : 3904
    Agent URL : https://CSDOWPDMS002.cs.msds.kp.org:3872/emd/main/
    Repository URL : https://csdowgrid001.cspas.kp.org:1159/em/upload
    Started at : 2009-10-30 11:10:38
    Started by user : SYSTEM
    Last Reload : 2009-10-30 11:10:38
    Last successful upload : (none)
    Last attempted upload : (none)
    Total Megabytes of XML files uploaded so far : 0.00
    Number of XML files pending upload : 36
    Size of XML files pending upload(MB) : 16.24
    Available disk space on upload filesystem : 87.98%
    Last attempted heartbeat to OMS : 2009-10-30 11:10:44
    Last successful heartbeat to OMS : unknown
    [30-10-2009 11:10:46] USERINFO ::Agent successfully restarted... Done.
    [30-10-2009 11:10:46] USERINFO ::Securing agent... Successful.

  • Agent Unreachable, collection status: file handles exhausted

    Hi, I have a problem with management agent. Status of agent in grid control is Agent Unreachable. Here is an output of emctl status agent:
    Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
    Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
    Agent Version : 10.2.0.5.0
    OMS Version : 10.2.0.5.0
    Protocol Version : 10.2.0.5.0
    Agent Home : /opt/oracle/agent10g
    Agent binaries : /opt/oracle/agent10g
    Agent Process ID : 26832
    Parent Process ID : 26821
    Agent URL : https://bs11.xxxx.lan:3873/emd/main/
    Repository URL : https://gridcontrol.xxxx.lan:1159/em/upload
    Started at : 2010-07-06 14:24:30
    Started by user : oracle
    Last Reload : 2010-07-06 14:31:50
    Last successful upload : 2010-07-06 15:11:47
    Total Megabytes of XML files uploaded so far : 51.87
    Number of XML files pending upload : 4
    Size of XML files pending upload(MB) : 0.01
    Available disk space on upload filesystem : 60.35%
    Collection Status                            : File handles exhausted
    Last successful heartbeat to OMS : 2010-07-06 15:11:52
    I wonder what does this message mean Collection Status                            : File handles exhausted I can't find any solution to my problem, I tried restarting agent, clearstate, upload, resynchronization... all of this did nothing.

    Did you already check: Master Note for 10g Enterprise Manager Grid Control Agent Performance & Core Dump issues [ID 1087997.1]
    On http://support.oracle.com
    https://support.oracle.com/CSP/ui/flash.html#tab=KBHome%28page=KBHome&id=%28%29%29,%28page=KBNavigator&id=%28bmDocTitle=Master%20Note%20for%2010g%20Enterprise%20Manager%20Grid%20Control%20Agent%20Performance%20&%20Core%20Dump%20issues&bmDocDsrc=KB&bmDocType=BULLETIN&bmDocID=1087997.1&viewingMode=1143&from=BOOKMARK%29%29
    Regards
    Rob
    http://oemgc.wordpress.com

  • Import button (the exclamation point) is disabled in Import manager toolbar

    Hi,
    I am working with MDM and loaded catalogue into MDM import manager. I did Mapping fields/Values and table mapping in Import status tab shows "Filed mapped 30 of  30". But the Import button (the exclamation point) is disabled in Import manager toolbar to import this to data manager.
    Thanks
    Suri

    Hi Suri,
    Please refer my article "SRM-MDM Catalog Setup - Ready Reference".
    The SDN link is attached below
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/806f3d56-0d29-2d10-9abf-c0df6f0fdfe8?quicklink=index&overridelayout=true
    Kindly refer "Import of supplier catalog" section.
    Hope this helps.
    Regards,
    Vikas

  • LMS 3.0.1, RME 4.1.1 - Inventory Collection Status displays too many device

    Running LMS 3.0.1 with RME 4.1.1 on a Windows box. On the Inventory Collection Status screen I see the following:
    Inventory Collection Status No. of Devices
    Inventory Collected: 1246
    Inventory Never Collected: 0
    Inventory Recently Failed: 34
    Total 1246
    The problem with this is that I only have 668 devices. Is this just a cosmetic issue?

    Assuming you're not integrated with ACS, then yes.  If integrated with ACS, some of the devices may not be authorized.  You will need to check your ACS configuration to make sure all devices in LMS are known to ACS and that your user (and the System Identity User) is authorized to manage them.

  • How do you disable the uploading capabilities in Adobe Creative Cloud?

    Is there a way to disable the uploading capabilities for Adobe Creative Cloud? 
    I just want users to get the downloads for their Adobe Products and not be able to upload anything to the cloud.
    Any input would be greatly appreciated. If there is a solution, please send me documentation or a "how to".  That would be very greatly appreciated!

    Stop paying, the programs stop working
    This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
    -cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • I have a large classical music collection.  As I uploaded into the IMAC needless duplication occurred in the genre classifications.  Some compositions are separated by movement and placed in "LP-Classical" genre, but in duplicated genres. How combine thos

    Question:  I have a large classical music collection which I have  uploaded into my IMAC computer. In the process many of the compositions were placed in needlessly duplicated genre categories ( a sonata turns in three SEPARATE "LP-Classical" categories, all 3 movements separated into different "LP-Classical"  categories, one atop the other.  How does one eliminate the foolish duplication and recombine the three movements into one composition? I am Desperate.
    Normal editing techniques do not work for this problem!  Thank you/

    Question:  I have a large classical music collection which I have  uploaded into my IMAC computer. In the process many of the compositions were placed in needlessly duplicated genre categories ( a sonata turns in three SEPARATE "LP-Classical" categories, all 3 movements separated into different "LP-Classical"  categories, one atop the other.  How does one eliminate the foolish duplication and recombine the three movements into one composition? I am Desperate.
    Normal editing techniques do not work for this problem!  Thank you/

  • Email notification when Document status changes in Solution Manager

    Hi,
    Is there a way to send email notification to certain people if the document status changes in Solution Manager?
    For example: A notification email should be send to business user when development is complete.
    When development is complete, document is set with status 'Build complete'. As soon as this status is set, we want to notify business user to test the object. Similarly on other document statuses as well.
    Thanks in advance.

    Hi Vikky
    Check out doco 'How to: Automatic email notification' on service.sap.com.
    SAP Support Infrastructure > SAP Solution Manager > Information for VARs ASPs and AHPs > Setup Documents (SP15+)
    Thanks
    Daniel

  • Panel Collection Status Bar Facet is not stretching properly

    hi,
    Panel Collection Status Bar Facet is not stretching properly
    when we change the accessibility large font mode is
    and change the browser text size as Largest.
    thanks in advance

    hi,
    thanks for suggestion but I've already applied the AFStretchWidth styleClass.

  • Filtering the library by collection status

    I've been using LR for adjusting photos for about 6-8 years now, but have just recently gotten time to start better organizing my stuff. I have about 40,000 images that mostly have keywords and descriptive file names, but are generally without ratings, color labels and are mostly not in collections. I must admit that there's a lot of junk in there (duplicates, mostly) that I have to purge. I can probably work it down to 10,000 images.
    In addition to putting ratings and labels on things, I want to sort them into collections, but that task would be easier if I knew which images were NOT in collections so I could concentrate on them and work that set down. I don't see a way to set up smart collections to show images that are not in a collection. Looking through help  it appears that the smart collection criteria can be selected from whatever text selection criteria are available, and I don't see inclusion in a collection as one of them. I also don't see collection status as one of the metadata items that could be used to filter things.
    In a previous thread from 2007 I found the following workaround:
    Clear the quick collection and set it to the target collection.
    In the library view, select all the collections. Select all the photos.
    Go to the catalog and view all photos.
    In the Edit menu, click on "invert selection".
    That selects all the images not in a collection. Pressing B puts them in the quick collection.
    The only problem with this is that when you select an image from the quick collection and place it in a collection the image remains in the quick collection. In a smart collection filtered by collection status (not in a collection) it would disappear from the smart collection when it goes into a collection. So it would be much nicer if there were a way to filter for "not in a collection" for a smart collection or even in a metadata filter.
    The above workaround does work, but you will have to refresh the quick collection whenever you lose track of which images you have placed into a collection.
    Of course, the best solution would be not to get into my position in the first place. Always dump the junk out of the catalog and place all the keepers in appropriate collections. It never hurts to have multiple ways of finding something.

    I guess I missed the selection source --> collections in the new smart collection dialog box.
    I tried it out and it almost worked the first time. The number of images shown with all the collections selected plus the number of images listed in the "Not in a collection" smart collection didn't add up to the total number of images. The first thing I had to do was to clear the quick collection, which isn't listed with the collections, but is counted by the filter. That came closer, but didn't quite get them all. The next thing I did was to change the filter criterion to "A E I O U a e i o u 0 1 2 3 4 5 6 7 8 9" since the filter appears to be case sensitive.
    Now it works fine. Thanks for the new smart collection filter.

  • HELP please Wi-Fi (Wireless LAN) Disabled by device manager

    I have HP 2000-2d02EIA Notebook PC, but my wireless not working it shows this message "Wi-Fi (Wireless LAN) Disabled by device manager" via hp connectin manager when its on, please help me.

    Hi,
    Try Reinstalling the Wireless drivers for your notebook..
    Follow the instructions from the link below to reinstall wireless drivers using recovery manager..
    Restoring applications and drivers on notebook computers with Windows 8
    Note:
    If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

  • Disable the Remote Management Service?

    I know this is "Why would anyone want to do this" question but we are having conflicting issues in one of our labs between NetSupport and Zenworks when trying to run Adobe Flash. NetSupport is a tool that quite a few of our lab teachers use, it gives them the ability to see all of there students screens, take control of them, and a few other features, all from a console that runs on the teacher machine.
    The problem comes in when running Flash if the student tries to create a text box and scroll inside of it then the computer crashes. We contacted NetSupport for help with this and they had us run a reporting tool that looked at the hardware setup and driver information. Then they setup a test machine and tried to replicate the problem and they were not able to. However they tech did note that in the scan of the machine there could be a conflicting issue between NetSupports Mirror Driver and DemoForge TightVNC Mirror Driver. I assumed the latter was part of Zenworks remote management. So we stopped the remote management service on a machine and tried to replicate the problem. We did not encounter the problem so we turned the remote management service back on and sure enough as soon as we tried to replicate the problem again the machine crashed.
    Now when we tried to disable the remote management service in the services menu but it will not stay disable as soon as the machine restarts the remote management service is running and its set to automatic again.
    Is there anyway to disable (preferable) or remove just the remote management piece with out removing the rest of the client from the machines?
    Thanks,
    Mike

    You can configure this in the ZCC for which components you want
    installed. You can deselect Remote Management.
    Note: You can also disable or remove the Mirror Driver from the Devices
    Control Panel under Display Drivers and it will not come back.
    On 1/13/2012 2:36 PM, mshicks wrote:
    >
    > I know this is "Why would anyone want to do this" question but we are
    > having conflicting issues in one of our labs between NetSupport and
    > Zenworks when trying to run Adobe Flash. NetSupport is a tool that quite
    > a few of our lab teachers use, it gives them the ability to see all of
    > there students screens, take control of them, and a few other features,
    > all from a console that runs on the teacher machine.
    >
    > The problem comes in when running Flash if the student tries to create
    > a text box and scroll inside of it then the computer crashes. We
    > contacted NetSupport for help with this and they had us run a reporting
    > tool that looked at the hardware setup and driver information. Then they
    > setup a test machine and tried to replicate the problem and they were
    > not able to. However they tech did note that in the scan of the machine
    > there could be a conflicting issue between NetSupports Mirror Driver and
    > DemoForge TightVNC Mirror Driver. I assumed the latter was part of
    > Zenworks remote management. So we stopped the remote management service
    > on a machine and tried to replicate the problem. We did not encounter
    > the problem so we turned the remote management service back on and sure
    > enough as soon as we tried to replicate the problem again the machine
    > crashed.
    >
    > Now when we tried to disable the remote management service in the
    > services menu but it will not stay disable as soon as the machine
    > restarts the remote management service is running and its set to
    > automatic again.
    >
    > Is there anyway to disable (preferable) or remove just the remote
    > management piece with out removing the rest of the client from the
    > machines?
    >
    > Thanks,
    > Mike
    >
    >
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Knowledge Partner
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.

  • Shows the status "failed" in AddOn Manager

    I have created a  addon for our clients. The addon works fine and loads up each time a user logs into B1. The only issue I am seeing is that the addon is listed with a "Failed" status in the Addon Manager even though the addon works fine.
    Is there some code that I need to include to ensure that the status is set to "Connected".

    Hi Parag,
    Yes this is a problem, for sort out this problem, when you are creating installer for your addon you can open the CustomInstallerClass.vb under customerLibrary in your installer project.
    and do this change
    actual code:
    #If Version = "2005" Then
          '' Call B1 EndInstallEx, succeeded true
          ret = EndInstallEx(targetDir, True)
                If (ret <> 0) Then
                    MsgBox("Error at EndInstallEx(True) call at the end of the AddOn installation: " + targetDir)
                End If
    #Else
          '' Call B1 EndInstall (no parameters)
          ret = EndInstall()
          If (ret <> 0) Then
            MsgBox("Error at EndInstallEx() call at the end of the AddOn installation")
          End If
    #End If
    change it to :
    #If Version = "2005" Then
          '' Call B1 EndInstallEx, succeeded true
          ret = EndInstallEx(targetDir, True)
                If (ret <> -1) Then
                    MsgBox("Error at EndInstallEx(True) call at the end of the AddOn installation: " + targetDir)
                End If
    #Else
          '' Call B1 EndInstall (no parameters)
          ret = EndInstall()
          If (ret <> 0) Then
            MsgBox("Error at EndInstallEx() call at the end of the AddOn installation")
          End If
    #End If
    you have to compare ret to '-1' instead of '0'
    after done that change again rebuild your solution, its working fine.

  • I can't download CS6 Trial version. Seems "up to date " status in  Adobe application manager.

    I can't download CS6 Trial version. Seems "up to date " status in  Adobe application manager. Please help

    Run the Creative Suite Cleaner Tool, try again.
    Mylenium

  • How do I Disable ThinkVantage Password Manager

    I have a new Lenovo T400.  ThinkVantage has a password manager that pops up almost continuously when I'm browsing the web and, quite frankly, it's irritating.  How do I disable the password manager?

    Hmmmm, as far as I know, the "Password Manager" is installed with the "Client Security Solution". Anyway, if you are using windows XP and you have not uninstalled the "Client Security Solution", you can run it manually as following:
    Windows --> Start --> Run --> "C:\Program Files\Lenovo\Client Security Solution\css_user.exe" /startmenu
    But there is another option. You can disable Password Manager per-application. For example if you want to disable it for Internet Explorer try this
    Password Manager --> Set Preference --> General --> Application Support --> Uncheck the Internet Explorer.
    You can turn it off for all applications by disabling available options.
    Message Edited by bahador on 06-08-2009 07:47 PM
    Message Edited by bahador on 06-08-2009 07:51 PM
    ThinkPad T500 2082-6PG: T9400(2.53GHz), 2GB RAM, 250GB 5400rpm HD,
    LCD, 256MB ATI Radeon HD3650, Secure chip, Fingerprint reader, WinXP SP2

Maybe you are looking for