Collective deletion of Planned Orders
Hi,
We want to delete MRP generated planned orders collectivily. However we are using MD16 for it, but it is very slow process to get rid of unwanted planned orders. Our limitation is we can't go for re-generative planning.
Please help with any BAPI, function module or transaction code.
Regards,
Amol
Dear Amol,
Check this BAPI BAPI_PLANNEDORDER_DELETE in SE37.
Regards
Mangalraj.S
Similar Messages
-
How to find out manual deletion of planned orders in APO.
Planned orders are created on multiple bom levels when we call CTP from GATP for sales orders. For particular sales order there is no planned ordere at lower level. Dependent requirement is there which is uncovered.
I want to find somebody has deleted this planned order manually in apo. How to find out the same?
Regards,
SantoshHi Santosh,
If you suspect that the planned order was created but later on deleted manually, there is a cross check you can do to determine that.
In case of MATP, System uses the higher level Planned Order number to create the Dependent Demand at the lower level and only when this dependent demand is covered by a planned order it assigns the corresponding planned order number to it. So if you see the dependent demand number with same number as the higher level planned order for which it was created, you can be sure that a planned order was not created to cover the dependent demand that you see uncovered.
If the dependant demand number is not same as the planned order at higher level, then the planned order to cover the dependent demand was deleted.
I guess CTP also works the same way. If you're unsure about this, test it out.
Hope it helps.
Regards,
Mohan -
Delete a planned order for materials changed to ND (No planning) MRP1 view
Hi guys !
1. I changed the MRP Type "reorder point" to "no planning" (ND indicator in MRP1 view) for some materials.
2. ¿There is a process to regenerate or delete the planned order created before or have to be a manual process, for example from MD15?
Regards & thanks in advanced !>
FRANCISCO RODRIGUEZ wrote:
> Dear kumar kumar,
>
> Before put the question, i was testing the MRP with delete & create new planned order but it doesnt work..why? because when you changed the material to ND, the MRP transactions like MD01, MD02, MD03, send a error message: "Material not plannig" so they does not consider the material anymore.
>
> Definitly, i think to delete in a manual process (MD15).
>
> Thanks to everybody.
Dear,
even i know ND will not plan ( MRP )
My view was before changing to ND, delete the existing header material demand & Run MRP
with option 3, so that system will delete all plan orders of this material ( No Manual process )
Anyways Good Luck !!!
Regards
Madhu -
Field setting when collective conversion from planned order to PR
Dear expert:
Is there any way(except ABAP enhancement) to add the field "tracking number" in MD15 when I conduct collective conversion from planned order to PR. Seems in standard config this field in not included in this screen. I have set this field as a mandatory field, but even though when I conduct the conversion, this field still can not be displayed in the MD15 conversion screen.Hi,
There are following T. Codes to convert Planned Order to PR;
MD14 - Individual Conversion
MD15 - Collective Conversion
MDUM - In Background
Also MD04
User Exit is LMDZU001 - User exits in additional planning -
Massive deletion of planned orders
Hi everyone,
I would be very grateful if someone could tell me how to delete massively planned orders.
Thanks and best regards,
BenHi,
If you delete the PIR or demand in MD61 and run MRP in MD02 planning mode -3, all the planned order will get delete.
If you have firmed planned order assign Roll forward period.
This is you can do in tcode OPPR, define MRP group.Define consumption mode & Roll forward period.
If you put 2 days in roll forward means, all the old firmed planned orders created before 2 days will get delete.
Regards,
Dharma -
How to Delete stock Planned Order in APO
Hi,
I'm doing an iPPE model in APO and R/3 ... and while playing around with Repetitive confirmations, I got stuck with 2 Planned orders that can't be fully confirmed, fully reseted or deleted.
I don't have a production order in R/3 because I'm in a repetitive iPPE process.
I can see them in OM19.
I tried RLCDEL & /SAPAPO/DELETE_PP_ORDER but both reports can't see them.
Any Ideas ?
Thanks,
MarcFirst get the GUID of the Planned orders from /SAPAPO/OM16. Once you got the GUIDs, To get the GUIDs
In /SAPAPO/OM16, click on 'Orders' tab, enter location and APO order number and execute..you see the GUID for those planned orders
then go to SE38-->/SAPAPO/OM_DELETE_INCON_ORDERS...enter the GUID, planning version, check the boxes and execute..it should delete the planned orders
Thanks,
Sai -
Deletion of Planned Order in APO PP/DS
Hi All,
I have a question on PP/DS ( IS-Auto ). Suppose if we are deleting the planned orders in APO so what will happen to the concerned PDS. I want to preserve the PDS so that we can use them later.
If we delete the Planned Orders then will the PDS be also deleted ?
Thanks,
PrabhatPrabhat,
Think of a PDS the same way you would think of a Production Version in ECC. It is master data, and one or more of these can be assigned to a Material/Plant combination.
http://help.sap.com/saphelp_scm70/helpdata/EN/4d/01be3d1abbe913e10000000a114084/frameset.htm
A Planned order is Transactional data. Creating/changing/deleting a Planned order has no impact on PDS Master data. During the creation of a planned order, the system reads the PDS info, and copies selected bits of this master data into the Planned order. At this point, then, certain parts of the planned order data can be changed. Such changes generally do not affect the underlying master data.
http://help.sap.com/saphelp_scm70/helpdata/EN/49/d565caf54535f5e10000000a42189c/frameset.htm
Best Regards,
DB49 -
Sir,
How can i delete a planned order? will u plz tell me the t-code?
Regards
MeenuHi,
1) Use MD17 if you want to delete data of single material in mass
2) Use MD04, Enter Material, Plant > Open requirement in Edit mode & then delete
3) Use MD12
You can use either way depends upon the requirement.
Regards,
Chintan -
Collective scheduling for planned order
Dear Gurus,
i create the planned order using the bapi standard whit the production version , but when create the new planned order the version don't is read in the order, ( BOM + ROUTING ) OF THE version.
For read the production version you must reschedulling the planned order.
Are there the methods for read the production version at the creation of the panned order ,
or the strument for rescheduling collctive?
Thanks a lot
Daniele Pistilli
PP TEAMDear Gurus,
thanks for indication of the material master, but we don't always manage the versions of productions.
For the production order there are the routing without the production versions, but when i create whit the bapi or whit the transaction MD11 the new planned order manually i need setting the production version , but when i setting the version for the find the version ( bom+routing) i must re-scheduling the planned order.
Are there the BAPI or alternative soluction for re-scheduling the planned order collective, or for read directly the version present in the BAPI ?
Thanks a lot
Daniele Pistilli
PP TEAM -
Collective conversion of planned order to one production order
Dear all,
1. I have N number of pld ord for same material so i need to convert as production order with cumulative quantity.
Because to reduce Issing and confirming and receiving of number of production orders.
2. I need to create Number of production order with diffferent material numbers in one screen with different production order number.
Because per day i need to create more number of production order with different material number. If i create one by one it will consume more time as well as its not practical possible for our business scenario.
Pls let me know any standards are available in SAP.
Regards,
S.Suresh.Dear Suresh,
You can convert Planned Orders into Production order collectively as a mass maintanance in CO41 Tcode.
Revert if any doubt in case using above tcode.
Further if you wish to have one production order against multiple planned orders it is not possible as per Standard SAP.
You can convert to each planned order into individual production order not to single production order.
If you wish clubbed production order then better you use Individual / Collective Indicator as
2 Collective requirements only
Then you will get cumulative planned orders only against each material and you can convert all of them cumulatively to production orders in CO41 as a mass maintanance.
Hope your problem resolves.
Regards,
Tejas
Regards,
Tejas -
Dear all,
At the end of every week, we want to delete all the planned orders available in system. I tried COHVPI, but there is only two mass processing functin available, Convert Planned Orders and Material Availabilty Check.
So, can any one tell me which transaction code I can use?
Thanks and regards,
DevangHi
There is afunctionality called "Roll forward period"
The function of this:
To automatically update the master plan, you can set the system so that firmed planned orders that were scheduled before the roll forward period can be deleted during the planning run. With this function, all planned orders, for which there are no longer any requirements, are deleted.
For this you have to have some config settinglike:
In step "check MRP types", you can maintain the indicator "Delete out-of -date planned orders" which is used to set the system so that firmed order proposals, that lie beforethe roll forward period, are deleted in in the planning run. At the same time, new planned orders are created that are adjused to the current situation. (Or depending on the fixing type the old order proposals are displaced to the end of the planning time fence.)
This is available in the IMG step:
Production >MRP>planning>MRP calculation>Define planning timefence& roll forward period.
Pl. try this & come back.
Regards
YMREDDY -
Collective requirements of Planned orders
Hi All,
When i see the report of planned orders MD16, the planned orders of same material in the same date are not added as 1 planned order. Although i have used the value 2 in MRP view 4 for the field Ind/Collective requirements
Please adviseDear,
If you want to use the collective requirement then use some other lot size according to your requirement but not lot for lot (EX). May be you can use daily lot size, weekly lot size or monthly lot size. So your requirement will be collected according to your lot size maintained. Revert back for more clarification.
Hope it will help you.
Regards,
Alok Tiwari -
Collective conversion of planned order
hello experts,
i have some planned orders, while doing the collective converison in production order by CO41 i m unable to do so, the system is giving the error message "PLZ MAINTAIN SETTLEMENT RULE" and message number is "ZSD01000", but i can convert these planned orders individually in MDO4, there's no problem in individual conversion in MD04.
Regards,
Sarfaraz.Dear
Check ur configuratin settings
1. U must have maintained Plant Parameters for the Planned Order - Conversion
In that the profile u have selected, maintain that in the Settlement Profile Customization.
Use T code - OPPQ for Plant Parameters Settings
Use T Code - OPKT (Define Settlement)
Regards
Samunder Singh -
Delete firmed planned order, pr or schedule lines
Hi All,
Do any user exit, functional module , sap notes is there to delete the firmed planned order, PR, Scheduling line
while run the MRP.
Thanks
vrajRoll forward period
To automatically update the master plan, you can set the system so that firmed planned orders that were scheduled before the roll forward period can be deleted during the planning run. With this function, all planned orders, for which there are no longer any requirements, are deleted.
Note on roll forward period
In step "check MRP types", you can maintain the indicator "Delete out-of -date planned orders" which is used to set the system so that firmed order proposals, that lie beforethe roll forward period, are deleted in in the planning run. At the same time, new planned orders are created that are adjused to the current situation. (Or depending on the fixing type the old order proposals are displaced to the end of the planning time fence.)
Hope this suits your requirement.
Regards
Ratan -
Delete SNP Planned Order to reflect at R3 (C5 or CCR)
Hi,
I deleted some SNP planned order using rlcdel, should i use a C5 or CCR to transfer to deletion toR3 to reflect the changes . ? what situation should i used C5 or CC5
many thanksHi,
RLCDELETE has the radio buttons "In APO" and "In APO and R/3". if you check the "In APO and R/3", the deletion is immediately sent to R/3. No need to run C5. If not then you just deleted the order only in APO and did not delete in R/3. You can either run C5 and select the change pointer with "R"- delete or run CCR report or delete these orders manually in MD16 in R/3.
what situation should i used C5 or CC5
C5: When you sent periodic transfer in SPRO, then create an order and push it to R/3. You can also delete an order and push the delete change pointer (R) to R/3
CCR: When the orders in APO and R/3 donot match.
Maybe you are looking for
-
Credit Limit based on Open Items only.
Dear Friends, Is it possible to set credit limit based on Open Items only ( Document Type RV) If the credit limit is crossed for accounting documents not yet cleared, then system should allow creating sales order, but block any deliveries further. Ju
-
XML to IDOC : Hierarchy mapping help needed
Hi All, I am trying to complete graphical mapping for an XML to IDOC structure. Both structures are EXACTLY same, but data is not populating in IDOC as desired. My incoming XML structure and IDOC structure is Header Data_header (1 -- 999) |_Data_i
-
How do I configure a user account to have 'logon as a service' permissions?
How do I configure a user account to have 'logon as a service' permissions? This is for CRM application use and need to enable permission via GPO Microsoft TechNet Forum Bandara
-
Does anyone know if ICloud is going to work with 64 bit computers?
Mobile Me did not work with the new I7/64 bit computers. they would not sync. I'm wondering if ICloud is going to work with 64 bit comptuers?
-
DreamSpark subscription for Azure is not apperaring in my Subscriptions in VS2013 Professional
I have a DreamSpark subscription for Azure but when I create a new MVC application and try to host it in Cloud my subscription doesn't appear in the list.