Collective GR slip is not getting printed

Dear All,
I have done all configs and also maintained MN21 conditions for WE03 output type (also for WE01) . It is printing individual slip (2 copies) and one copy as collective while taking printout after MIGO (4 is selected in despatch time). Actually these 2 copies are because, I maintained output conditions in WE01 (ME, and 3 (collective slip)) for 2 copies and print immediately). However if i remove this and maintain only in WE03, it is not at all prinitng the material doc, despite all configs. I also maintained parameter NDR as X.
Can you please throw some light and solve the same.
Thanks ,
satish

Hi,
Have you ensured there's no automatic access sequences to determine individual slip in NACE?
If you get both WE01 and 03 in GR, there must be an access sequence to them.
If this continues you should ask a BC to look at the program.
Regards.

Similar Messages

Text overflown is not getting printed in the next page in ADOBE

Hi Experts,
I have a text field, where the users can enter the comments. In this text field if the user enters more than a page, a scroll bar appears in the print preview where the users can view the complete text what they have entered, but while printing the text which exceeds more than a page is not getting printed in the next page.
I have set the subform properties as "Flowed" and the check box "Allow Page Break within content" is also been enabled, but still the extra contents is not getting printed in the next page.
Please help me regarding this.
Thanks & Regards,
Karthik MD

Hi Lohitha,
Even "Expand to fit" is been enabled.
Thanks & Regards,
Karthik MD

Text overflown in the first page is not getting printed in the next page

Hi Experts,
I have a text field, where the users can enter the comments. In this text field if the user enters more than a page, a scroll bar appears in the print preview where the users can view the complete text what they have entered, but while printing the text which exceeds more than a page is not getting printed in the next page.
I have set the subform properties as "Flowed" and the check box "Allow Page Break within content" is also been enabled, but still the extra contents is not getting printed in the next page.
Please help me regarding this.
Thanks & Regards,
Karthik MD

Hi,
This issue is in ADOBE, I think there is no concept of Window in ADOBE,
The text box is placed inside a Subform.

Barcode is not getting printed in the SmartForm

Hi All,
I am trying to print BARCODE in a SMARTFORM but it is not getting printed.
I have created a barcode ZTest_Barcode from the transaction SE73. Then I have created a Character Format C1 with this barcode ZTest_Barcode.
In the SmartForm I have applied this character format like this <C1>&WA_VBAK-VBELN&</C1>.
But in the preview of this SmartForm barcode is not getting printed while this field is printing like <C1>220<C1>.
I have also tried with some SAP barcodes like BC_CD39, C128A_01, etc. But the result is same.
Please help me to resolve this issue.
Regards,
Avaneet

hi avaneet,
check this site for barcode.
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
it may help you.
thanks
Sachin

APEX4.0.2 - Interactive Report total is not getting printed when downloaded

I've an Interactive Report based on a sql in Apex 4.0.2. There is a Balance column whose total sum is displayed at the bottom of the table.
When I download the report, the total sum of balance column is not getting printed in the bottom of the report.
Could this be a bug or have I missed some setting?
Thank you for the help.

Hi,
Whilst you can update the SQL to include totals, these would probably not be effective if the user filters the data (the total row may be filtered out) or sorts columns (as the total row would likely be sorted as normal data).
Unless someone else has any other ideas on this, this may be something that needs to be logged with the Apex team as an enhancement request - create a new thread and start the Subject as "Enhancement Request:"
Andy

Invoice is not getting printed for particular 3 customers

Hi,
When user is printing the Invoices, only for specific 3 customers it is it not getting printed automatically, but the output is shows success with green. When they re process it manually, it is printing successfully for the same printer.
1. Printer setup is checked it is correct
2. There are two outputs one is External send (E-mail) and one is Printout.
3. The problem is with only the Printout, where as the external send (E-mail) is sent successfully.
Help me out in this issue...
Thanks
BP

Hi
First of all Welcome to SCN Forum
Please check wheather any subroutine has been assigned to the output type access sequence.If the problem is with printout only then check the Logical destination that has been maintained in VV32 for those 3 customers.In VV32 for those 3 customers check wheather Release Immediately has been checked or not. Before reprocessing it go to VF02 and check on determine analysis
Regards
Srinath

Vendor Address not getting printed properly in cheque printing.

Hi
While printing the vendor address for the cheque printing, for certain vendors the street no. is not getting printed & for certain vendors PO Box is not getting printed.
In the program we are fetching vendor address from REGUH table & then passing onto the global variables which are being used in the script & data is there in the database table for both street & PO Box number.
The code in the script is as follows:
/:           ADDRESS PARAGRAPH UH TYPE '3'
/:             TITLE    &W_ANRED&
/:             NAME     &W_ZNAME1&,&W_ZNAME2&,&W_ZNAME3&,&W_ZNAME4&
/:             STREET   &W_ZSTRA&
/:             POBOX    &W_ZPFAC& CODE &W_ZPST2& CITY &W_ZPFOR&
/:             POSTCODE &W_ZPSTL&
/:             CITY     &W_ZORT1(28)&
/:             COUNTRY &W_ZLAND&
/:             FROMCOUNTRY &W_LAND1&
/:             ADDRESSNUMBER &W_ZADNR&
/:           ENDADDRESS
Can anyone please let me know, what could be the possible reason for this?

you can tyr with TYPE '1' or TYPE '2'
: ADDRESS PARAGRAPH UH TYPE '3'

Not getting print out of PO

Dear all,
I am not getting print out of PO. In the message out put, the config ( NACE , MN04 ) and as well as all setting are correct. in FURTHER DATA tab, the despatch option id 4 : Send immediately ( when saving the application) ; but it is not generating any spool request for print out. i have checked in SP01 and SP02 , but I could not find out any spool request. More interesting, with the existing config and message setting , we were getting print out till one day ago but presently it is not working.
Hoping for corrective solution.
Regards,
Partha

Hi,
check t.code SPAD and involve Basis Consultant.
Also check NACE t.code for Program, std form,routine, medium
Note:
Customisation steps for Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
Regards,
Biju K

Barcode not getting printed from web dynpro

Hi,
We have a smnart form with bar code. When we test it from GUI, it is diplaying the bar code and also printing the bar code successfully.
However when we show the same smart form in webd ynpro as PDF, Bar code is getting displayed but when we print the form, bar code is not getting printed.
Are there some settings for this?
Regards,
Madhu

https://discussions.apple.com/message/23759716?ac_cid=tw123456#23759716

Not getting print preview

Hi,
i'm not getting print preview screen when using a standard print program with a smart form.
i cant change the print program..is there any other way?

hi
check for these options
DATA:     gs_control          TYPE ssfctrlop,
          gs_output_options   TYPE ssfcompop,
'X' TO gs_control-no_dialog,
'X' TO gs_control-getotf,
'PRINTER' TO gs_control-device,
'LOCL'(047) TO gs_output_options-tddest.
if there is osme table controlling the flow disable that or u may remove it from calling program
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname           = 'ZLB_BIL_INVOICE'
    IMPORTING
      fm_name            = lv_fnam
    EXCEPTIONS
      no_form            = 1
      no_function_module = 2
      OTHERS             = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION lv_fnam
    EXPORTING
      control_parameters = gs_control          * "" Disable these two options*
      output_options     = gs_output_options * "" same here*
      user_settings      = space
      is_bil_invoice     = lv_bill_invoice
      is_nast            = lv_nast
      is_repeat          = space
    IMPORTING
      job_output_info    = gs_job_output_info
    EXCEPTIONS
      formatting_error   = 1
      internal_error     = 2
      send_error         = 3
      user_canceled      = 4
      OTHERS             = 5.
IF sy-subrc <> 0.
   MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
           WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
shiva

Google cloud print for officejet pro 8600 - could not get printer information from hp.

I just purchased a new OfficeJet Pro 8600 today. Everything seems to work great except for the connector to Google Cloud Print. I can print from AirPrint, as well as emails to the hpeprint.com address, but when I try to register via the google site, I receive the "could not get printer information from HP" error message.
The printer is connected via wireless ethernet, and seems to work find otherwise. I have no restrictions on who can send print jobs, and I have changed the email address for hpeprint.com a few times, as suggested in other forum threads, but it can never connect to the the Cloud Print service. I am at the latest firmware level listed on the HP website. I have tried to initiate the connection from multiple PC's as well as multiple web browsers.
This was a big factor in purchasing this printer. Help anyone?
This question was solved.
View Solution.

Hey rch33k, I am sorry for the ongoing issue that you are having accessing Google Cloud Print. This is being looked into as this is not a singular issue and is affecting other customers as well. Engineers are currently investing this problem to try and provide a solution to it. I want to again apologize and thank you all for your patience in this matter. They only other thing to attempt at this time is to contact Google for further assistance to see if anything can be done on their end. Hopefully this will be fixed quickly
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Google cloud print "could not get printer information from hp"

As of today google cloud print has stopped working with my laser jet pro. I started getting an error message that "hp eprint is unavailable at this time". I decided to remove my hp printer from google cloud print. I haven't been able to add it back in since. Every time I try to verify the printer with google cloud print I get the error message "could not get printer information from hp". Everything seems to be configured properly as far as I can tell. I even removed the printer from hp connected and readded the printer and have changed my printers email address. Help please! I am on Chrome OS and this is the only option I have to print.

The issue just kind of resolved itself today and I was able to add the printer. I'm assuming it was some kind of server issue on hp's end because I haven't changed anything since yesterday.

Reports not getting printed

My reports are not getting printed on Laser printer.I am using psl132.prt file in desformat. After giving the print command, printer showing message "Processing Job" for 5 sec and after that it is showing "Data Received" and "Ready " message. My reports are character mode. Some of my reports are getting printed using the same prt file.

psl132.prt is postscript landscape - you need different .prt file, or change your report to bitmap.

Script 2nd page-data not getting printed

Hi Folks,
I have a script which is related to TDS Certificate.The problem is I am having all the data in the table that is used to print the data but I am not getting only the tabular column i.e contigious data printed for the next page.The rest all getting printed correctly.
To be clear
first page is having
index,belnr,total amount,educess,sur charge etc.
1/10100/22.00/33.00/44.00/77.00
in the second page again it should print again
index belnr total etc but it is not getting printed.
blank
But the final table is having 2 belnrs data.Where I am going wrong?
Thanks,
K.Kiran.

Hi,
During test print, you cannot see the second page.
The second page will be visible only when there is data flow from page 1 to page 2.
Execute with actual data and check if it flows through to page 2.
Also Please try this:
After your first page, include this:
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'NEW-PAGE'.
and then call the the write form with text element in second page,
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'PG2'
window = 'INV'
EXCEPTIONS
element = 1
function = 2
type = 3
unopened = 4
unstarted = 5
window = 6
bad_pageformat_for_print = 7
OTHERS = 8.
Reward points if found helpful..
Cheers,
Chandra Sekhar.

Can logger stmts belonging to one class alone not not get printed at times?

Hello,
My application has run into an issue where some log statements in "one particular class" do not get printed at times. The issue is not reproduced in a consistent manner ie. it may happen on some days/may not on some other days.
Here is the structure of the two classes which has reported the issue. I have a class A and another class B which has extended the class A. I am printing 2 log statements in class B(one statement using the logger object of class A (logA object), and the other statement with the logger object of class B (logB object)). But the logger statement using the logA object does not get printed on some days. After a server restart, it starts working fine. Is there some thread which gets killed?
public class A{
protected static Logger logA = Logger.getLogger(A.class);
public static void myLog(String s) {
logA.info("in myLog, " + s);
public class B extends A{
protected static Logger logB = Logger.getLogger(B.class);
myLog("Log Statement Number 1"); //This statement does not get printed all the time
logB.info("Log Statment Number 2"); //This statement always get printed
Any help is appreciated. Thanks
Anoop

Anoop.Isaac wrote:
The issue is not reproduced in a consistent manner Since you cannot reproduce the problem you have not narrowed down what the possible cause might be. So now you expect someone here to diagnose your problem and provide a solution just by reading some vague and incomplete lines of code with no other information.
Good luck with that.

Collective GR slip is not getting printed

Similar Messages

Maybe you are looking for