Collective order problem

Hi gurus:
      I having a problem  when I use collective order, discrible as below:
When I do the confirmation for the last operation of the subordinate order, it does not trigger  the auto-GR and auto-GI to the parent order. What can be the possible reason?
      It worked well in past... 
      Further, the "Collective order with/without automatic goods movement" indicator is NOT set for the order type we using.
BR
Kevin

Dear Vivek:
      Thanks for your kindly reply.  Is the tick box you metioned "Coll.order with...." ?
If so, after I flagged it, new problem occur.
The first problem is the settlement receiver of the child order is incorrect . Now , the receiver is the Semi-FG which should be the parent order.  But it was right before the change I made.
Another problem is the auto-GR always hold by the system which I can find it in CO1P.  It worked well before the change
Any clue?   Thanks.
BR
Kevin

Similar Messages

  • COGI error generated while collective order confirmation

    hi ALL, this is the real  task for all PP GURUS.
    the issue is related with collective order confirmation.
    client is using customised program ZPP_CONF to confirm the collective order which is based on the sap spro program CORUPROC.this include automatic goods receipt,backflush & actual cost update .as user use zpp_conf for confirmation all this actions happened in backgruond.
    now after using ZPP_CONF . the confirmation is not happening .instead of that it is going in COGI where they are getting a error massage which is as follows
    "You have no authorization for this transaction with movement type 101u201D
    this error continues for 10-15 minutes after doing refresh it goes. & confirmation happens.
    this is not happening for all orders but for 8 out of 10.
    users have proper authorisations.
    they have enough stocks in st. locn.
    they are loosing lot of time becuse of this.
    HOW CAN I RECTIFY THIS ERROR GURUS?
    when i search i found this is written in the CORUPROC documentation
    Incl. incorrect goods movement: Not only preselected but also incorrect goods movements that are usually processed with transaction COGI are  selected and processed. 
    VENKADESH

    Hi,
    The Program CORUPROC only can adjust the Errors in Goods movements. It can not handle the Table Locks..
    The Program CORUAFWP, can taek care of table locks also, apart from the Errors in Goods Movements.
    Refer below thread for similar type of problem..
    COGI errors
    Hope this helps..
    Regards,
    Siva

  • Scheduling in collective order

    I need some hint on a problem I'm facing here...
    We are using collective orders(Proc. E- SP. 52) and no scheduling parameters are defined in our workcenters...
    When I create a production order on the top level (finish good) for 10/ 31, the component that has an In-house production time =1 scheduling margin key = 000 is scheduled to finish 11/03
    I tried using "backwards" scheduling, "backward in time" scheduling...
    I would like the component to have start date 10/30 and finish date 10/31
    Any ideas?
    If I remove the in-house production time, the finish date of the component is the same as the finish good...

    Luc,
    Check with Route time for the component. It is likely the route time is higher than 1 day. Production order schedules on route time & hence likely the order has a finish date of 11/3.
    If your only looking at the planned order planning then it will take the material master inhouse production time. Also please check if you have 31 Oct as a non working day in your factory calendar. If yes then it is likely 1 & 2 Nov( SAt/Sunday) are non working too & hence the order plans to finish on 11/3( monday).
    That also explains if you remove inhouse time, system takes 0 days & has finish date as 10/03.
    Hope this gives you with some hint about what might be going on in your system.
    Thanks,
    Ram

  • MRP for collective order

    Dear experts:
           I met a problem of Collective order.
           My scenario is :   Fert (A) -- Halb (a) -- ROH ( b) .  Set special procurment 52 in mrp2 of material a.
           suppose material "a" has stock 30pcs,  now when i creat a Plan order for "A" 100pcs,
           and then run MRP,system generate a plan order "a" 100pcs directly,
           not consider the stock of a (30pcs). 
            my question is how to setting, then i can get the result :  Plan order "a"  is 70pcs.
            And also how to setting when scenario is creating Production order.
            Thanks in advance.

    Dear R.Brahmankar:
          Fert A :        M0      Individual/coll.  "blank"
            Halb a:       M0  ,  special procurement:  52  , idual/coll.  "blank",     stock 30pcs
               ROH b:   PD.
      Now , I creat a Plan order for "A" :100pcs, and Run MD41,  
      result is:    material  "a",   plan order :  100 pcs.
      but what I expectation result is :   material  "a",   plan order :  70 pcs.  for I already have 30pcs stock  of material "a".
      how should i do. Thanks

  • Cancellation of collective order.

    Hi PP gurus,
    While cancelling collective orders, all the input materials for main and sub orders were returned back (with 262 movt.)
    and output on the main WO also cancelled (with 102 movt.)
    But the output material of the sub orders were not cancelled .for sub order material 102 movt type is not shoeing in document.
    In that case variance it will be huge as no input material will be consumed to get the output for the sub orders.
    Thanks

    Hi venugopal,
    Thanks for u r response.
    but it is not allowing to delete from sub order level.
    for that sub order item Special procurement Key 52 is there.
    how to do the process.
    the problem is  movement type 102 is not updating for sub order material.
    Thanks

  • Direct production in collective order network, automatic 261...

    hi all,
    i have a problem in a schenario with collective order network.
    i have order B part of collective order network of order A. and material of order B has special procurement key 52 maintained in it. and colletive order of goods movement is selected in order type setting of order B.
    now the problem is when i confirm the order B, its header material automatically gets issued to order A (as per the settings that is fine.. ).
    but when i canel \ reverse the order A, i can not see 262 for material of order B which was issued automatically....??? why so?
    and if i try to revrse order B,  it stucs in COGI with the error of deficit of sales order quantity (or unrestricted quantity)....
    can somebody tell me how to sollve this? how to get 262 of the header material of order B?
    best regards,
    Maulin
    Edited by: Maulin Munshi on Jun 17, 2009 8:27 AM

    If you're doing the confirmation of parent order (leading order) at header level (meaning you use CO15) then you can only confirm that particular order and not any child order. If you want the child orders to be confirmed also after completely confirming you'd have to change the control key of last operation of routing in leading material as milestone and use CO11 or CO11N and just confirm the last operation, it will automatically confirm all the operations in the leading order and all the sub orders (child orders). I don't think your OPKI setting will solve the issue.
    Production orders that belong to collective orders are generally confirmed like normal production orders. However, you should note the following:
        When you carry out a confirmation at header or suboperation level, you can only confirm the order concerned.
        When you confirm at operation level, you can confirm operations for all orders as long as you work with milestone operations or progress confirmations.
        When there is a confirmation in the collective order, the system sets the status CFCO (release occurred in network) at the header level of the leading order in the collective order.
    If you want to read more than what I mentioned, you go to this link

  • Collective Order Actual Activity Pricing

    Hi Gurus
    We are using collective orders for production orders. As you know collective processes are used for costing shared processes.
    Let me explain the problem with an example: Say, we have product A and B to be produced. These two have shared operations and costs will be collected via collective orders by Tcode mill_oc.
    The process is as below:
    Production order 1 for product A. - Normal production order - CO01
    Production order 2 for product B. - Normal production order - CO01
    Production order 3 for product A - Collective production order - mill_oc
    Confirmations are done for Order 3 during period. At the end of the period Order 3 is settled to Order 1 and Order 2 with certain proportions.
    Actual activity price is calculated via Tcode:KSII. During CKMLCP the system valuates activities (posting price differences) for Order 3 product, Product A only. It must be the case that Product A and Product B have to be revaluated.
    NOTE: Actual activity price is valuated in material ledger, rather in orders (not with CON2)
    Is there any OSS notes or solution for this problem? If there is huge activity price differences, all the value is posted to just one product, which is collective orders product, rather than both lower level orders' products.
    Thanks in advance for your replies.
    Ahmet

    Hi Ahmet,
    This is rather a problem of material ledger multi-level settlement than of activity pricing. Material ledger will pick up the actual activity price correctly and will use the difference against the former activvity price as multi-level price difference on the production process. The problem is, if there are multiple outputs coming out of the process, as is resulting of the order combination process, material ledger will by default search for a apportionment structure (for joint production) in the material master of the main (or original) output material. As nothing will be maintained there, all the differences will go to this material.
    You can overcome the situation by a BADI implementation of BADI cost_split. There should be an example implementation in your system (if you have the Mill Products add-on active, as is indicated because you use Mill_oc) that enables to distribute the price differences by quantity of the outputs of a process. If you don't find the example implementation I could provide it to you.
    best regards,
               Udo

  • Direct production\ collective order cancellation

    i have a problem while dealing with collective order network schenario.
    i have 2 levels of collective order network e.g. A is parent order and B is child order.
    now as soon as i confirm the sub\child B order the header material for taht perticular order has 101 and 261 movement automatically,
    i.e. as soon as 101 is done for child order's(B) header material which is a non stockable material is also gets consumed(261) for header order\ parent order A.
    but while confirming the header order A, the header material of order B(which is non stockable material) is not there in goods movement screen.
    now while cancelling the orders A i don't have order B's header material in component list so that perticular material will not be cancelled so no 262 for that material.
    now when i try to cancel order B i get an error for order B's header material that deficit of sales order stock.
    how to deal with such problem?
    and i also want to know something about collective orders and special procurement key 52 with respect to order confirmation and cancellation..
    Edited by: Anil Jonnalagadda on May 23, 2008 3:38 PM

    Now the Reply for the Application of Collective Order
    Normally we have a Header Item Fert and Child items Halbs
    For Example If a BOM for a Fert contains 5 Halb materials and below some ROH
    Here what happens in discrete scenario 6 production orders can be created 1 for Fert and 5 for Halb
    so as a usual practive we have Release the Halb orders, GI for ROH , Confirmation of Halbs,GR for Halbs,.... then
    similar thing for Fert
    Now as the Halb is inhouse item and manufacturing parellely, the process of Relasing ,confirming ,GR are difficult process, you want to control through the Header Material
    So we want
    1) If i release the Fert Material the Bom Assy components (inhouse) below with collective order setting has to Relases Automatically
    2) If i confirm the Fert Material the the Bom Assy components (inhouse) below with collective order setting has to Confired Automatically
    3) The GR has to takes place automatically for Halb items(without any document) you can't see the stock of halb also it will always show "0"
    4) For the ROH below Halb a reservation will be generated those you can control manually or through Backflush
    So the setting required is
    Fert item keep Procurement =E
    For the bom halb items where you want collective order keep Procurement =E and special Procurement =52
    it will work
    thanks
    Prabakaran K
    Edited by: prabakaran k on May 23, 2008 4:00 PM

  • Incorrect quantity updates of sub-order in collective order

    Hi,
    We are using Cable solutions ver: 4.6c. When the quantity of the leading order is changed (co02), the sub-order quntities are not changing accordingly. Let me explain you in detail.
    Following are the settings in Material Master.
    Material      BaseUoM      AsseblyScrap  ProcurementType    SpecialProcurement   MatType
    MAT1          FT                11.5%               E - inhouse                                                  FERT
    MAT2          FT                                         E - inhouse               52 - Collective Order  HALB
    MAT3          LB                                         F - External               10 - consignment       ROH
    Following is the BOM structure for Leading Material MAT1 with base qty 1000FT
    Component      Qty     UoM
    MAT2               1000  FT
    Following is the BOM structure for MAT2 with base qty 1000FT
    Component      Qty     UoM
    MAT3               7.280  LB
    If I create a production order for MAT1 with qty 1000 - system adds 11.5% scrap and the final qty = 1115 and at the same time it creates a production order for MAt2 with qty 1215 (this is another issue - it suppose to be 1115 but it adds 100 more, dont know why). Now if go to change mode and change the qty for MAT1 to 10000 then the target qty = 11150, but the Qty for for order of MAT2 = 5529 - which is incorrect, it is suppose to be around 11150.
    One thing i noticed is - if Assembly scrap for MAT1 is removed in Material master then the Quantity of the MAT2 is updating correctly.
    Anyone had this kind of issue before? Please let me know the solution to this problem.
    Thanks in advance.

    Is any one there who can help me on this problem. I am waiting.....
    Thanks in advance

  • WIP Consumption in Collective order

    Dear All,
    We have gone live before 2 months ago, now client wants to implement collective order.
    I have gone through the testing of Collective order.but I am facing the problem of WIP,which is not getting consumed .How to do this ?
    Please give your valuable suggestion.
    Regads,
    VIjay

    Dear,
    You can check the good issue order wise from IW31.
    Also refer my reply from these threads,
    [Collective order|Re: Collective Order]
    [Collective order GI|Re: Collective Order Processing]
    Regards,
    R.Brahmankar

  • Collective order - manuell booking

    Hello all!
    Is there a way to use collective orders without automatic booking, but with manual booking.
    We like the idea of the linked production orders and the way it is handled. Our problem is,
    that we need the semi-finished goods on stock. So we have to book them with MIGO.
    Is there any other way to link the production orders and do physical bookings (like in every
    standard production order)?
    Thankful for all help,
    Barbara

    Hi,
    In a collective order, goods movements (GI & GR) are usually not required for assemblies that are directly produced.
    When u do the confirmation for Lower level order, Produed assemblies will be issued to Higher level order directly, so manual goods issue not possible for assemblies to Higher level order.
    U can confirm this, with Higher level order cost analysis after the confirmation of lower level order.
    So need not issue the produced assembly to higher level order using the MB1A.
    Only thing u have to activate Collective order with goods movements object  box for Order type at OPJH .
    For Lower level order (Assembly order ) good issue for procured components of assembly can be done using MB1A with MVt type 261.
    Dependencies :
    For collective orders without automatic goods movements you must take organizational measures to ensure that the WIP calculation and the settlement of orders are each carried out twice. You cannot carry out a variance calculation for collective orders without automatic goods movements. You cannot carry out a standard cost calculation for a collective order without automatic goods movements.
    You can find detailed information on collective orders in the document Cost object accounting -> Order-related Product Controlling.
    Thanks,
    Mohit

  • Collective Orders with Phantom assembly

    HI experts,
    Required clarity on following scenario urgently.
    Material                                                Proc Type                             Special Proc
    A                                                                 E
    B(BOM item for A)                                       E                                             52
    C(BOM item for B)                                        E                                              50(phantom)
    C1(BOM item for c)                                        E                                             52
    When we are creating the production order for A,respective production orders for B and C1 is genrated.
    Now when we are confirming the production order for C1,GI of c1 to B is happening and also for C! production order it is giving the DLV status.Up to this the scenario working fine.
    But when we are confirming the production order for B,the GI for production order A and DLV status for production order B has to happen,BUt it is not happening.
    Can anyone throw some light on this. Expecting reply at the earliest.
    Thanks in advance.
    Regards
    LN

    Hi
    ritesh,
    It is not the question of control key.
    But the error is coming at the time of goods movement,we can see the description of it in "cogi".
    "ERROR IN DEPENDENT GOODS MOVEMENT."
    Because For 'c1',After confirming the order for 'C1',it will do the GR for 'C1'and GI of 'C1'to 'B' production order.
    Up to this it is working fine.But the same when I am trying for 'B'production order,After confirmation the GR for'B'is not happning And the Issue of B to 'A' production order is not happening.
    And in COGI the above error is coming.
    I want to know weather this problem occuring because of phantom assembly with collective order.
    Hope this will clear the problem understanding.
    Regards
    LN

  • Collective order confirmation for particular codes

    Hi
      I have problem for some material codes while production order confirmation.The material codes that starts with Sxxxxxxxxxxxxxx this number are not getting confirmed. Others are get confirmed without any issue.
    Production order confirmation is not working for that particular material code.
    Please guide me what solution should I give to the customer.
    BR
    Sagar

    Hi
    This is the error message. and one more thing this is a collective order and this is happening for parent order while child order is confirmed correctly.Goods movement is done through CO27 and confirmation is done with CO11
    BR
    Sagar

  • Collective order  - CO1F

    Hi
    good afternoon!
    I have a problem in the production record in transaction CO1F (used for collective order).
    The system is too slow to make the appointment, can someone help me to improve performance?
    Thank you,

    Hello Reginaldo
    Generally, performance issues are only observed on the order confirmation if there are too many operations or goods movements.
    If there are many goods movements, maybe it is better to post them in update mode. Check the setting on OPK4 and note 208477 for more details.
    Otherwise, you should run some traces on ST05 and ST12, in order to identify exactly what is causing the performance.
    BR
    Caetano

  • Costs of collective order

    Hai,
    I am working on collective orders. I have created a collective order having child orders and all steps completed for this collective order like release,confirmation and GR. Now i want to see thwe costs of this collective order.how tosee them full collective order wise and for each child order, Can anybody help me out

    Mario -
    KB15N worked perfectly.  I did get an error the 1st time I tried it:  "Manual Cost allocation" is not allowed, but I found another forum posting with the same error (messages BS027) that helped me resolve that problem (you need to enable manual allocations via transaction BS12 first).
    Thanks for your help!
    - Jason

Maybe you are looking for