Collective Processing VL10 is not grouping deliveries for same sales parame
Hi.
Created multiple sales orders for same sales parameters like ship to, sold to, sales org, etc.
When tried to process collectively the delivery ceation via VL10, system generated group for each delivery selected instead of creating group for multiple deliveries.
When I compared my client's system config with Standard config client, it is exactly same in terms of all parameters, scenario profile, delivery creation profile,etc. The standard system works as expected and grouping the deliveris and create one group for multiple deliveries.
The group type is L and delivery categories we are tryign to group is J & T.
Thanks,
hi sridhar
Collective processing of deliveries means delivering the few order collectively. that means one delivery document for all orders.
In vl10h u can access only orders due for delivery.
first of all mark the orders line items to do collective processing deliveries.
Similar Messages
-
Concurrent timers are not getting invoked for same timer inf
Do weblogic has some parameter in weblogic deployment descriptor like numAlarmThreads="5" minThreads="1" maxThreads="10" etc
becoz I am facing one problem relating to timer service in EJB
Problem Scope: Concurrent timers are not getting invoked for same timer info (Serializable object containing the details of timer).
Details : I am implementing EJB timer 2.1 and when ejbTimeOut execution of one timer exceeds the interval time, next timeout doesn’t happens till the execution of first ejbTimeOut completes . Ideally the timers should behave in the manner that on every interval the ejbTimeOut should occur no matter the previous timeout is completed or not
for example : consider there is timer T whose timeout occurs every minute, and on every timeout it calls process P, so on every minute ideally container should give call to process P irrespective of the previous status of P (call is complete or not). In our case next call to process P is not happening after timeout also since it is waiting for previous call to P to get completedYou should also cross-post this in the WebLogic EJB forum:
WebLogic Server - EJB -
Concurrent timers are not getting invoked for same timer info (Serializable
Problem Scope: Concurrent timers are not getting invoked for same timer info (Serializable object containing the details of timer).
Details : I am implementing EJB timer 2.1 and when ejbTimeOut execution of one timer exceeds the interval time, next timeout doesnt happens till the execution of first ejbTimeOut completes . Ideally the timers should behave in the manner that on every interval the ejbTimeOut should occur no matter the previous timeout is completed or not
for example : consider there is timer T whose timeout occurs every minute, and on every timeout it calls process P, so on every minute ideally container should give call to process P irrespective of the previous status of P (call is complete or not). In our case next call to process P is not happening after timeout also since it is waiting for previous call to P to get completedYou should also cross-post this in the WebLogic EJB forum:
WebLogic Server - EJB -
Concurrent timers are not getting invoked for same timer info
Problem Scope: Concurrent timers are not getting invoked for same timer info (Serializable object containing the details of timer).
Details : I am implementing EJB timer 2.1 and when ejbTimeOut execution of one timer exceeds the interval time, next timeout doesn’t happens till the execution of first ejbTimeOut completes . Ideally the timers should behave in the manner that on every interval the ejbTimeOut should occur no matter the previous timeout is completed or not
for example : consider there is timer T whose timeout occurs every minute, and on every timeout it calls process P, so on every minute ideally container should give call to process P irrespective of the previous status of P (call is complete or not). In our case next call to process P is not happening after timeout also since it is waiting for previous call to P to get completedYou should also cross-post this in the WebLogic EJB forum:
WebLogic Server - EJB -
Collective deliveries for open sales orders
Is there any process or transaction code for creating the collective Picking for open sales orders.
In my company we are not using the Warehouse management, so we pick the goods manually.
If there is any way plzpost the answer.Check if VG01 helps you if you enter "K" as Group Type
Cheers -
Need help in setting up Group Policy for same user in local system and Terminal server
Hi All,
Currently our remote users are using our network using VPN client over internet.
They are generally at their home computer and doing VPN as they have to work only in one RDP server for application.
We actually have a OU created for these RDP users and assign then some strict policy like they can not use any other .exe,they can not user any explorer ,they can not even use windows explorer when they are on RDP they just use one exe of their application.
Now what my management want is they want their home computers in Domain and want them to login via their same credentials they are using for RDP but they don't want them to restrict in their home computers with any strict policy.
Now my confusion is how can I configure different policies for same users or same OU.
Can any one guide me please...you can achieve this fairly easily with group policy.
create an OU and put your remote desktop servers in that OU.
configure both user and computer policies in a group policy and link it to that ou.
you need to enable loopback mode - you may want it in merge or replace depending on your other policies you have. Probably replace though I would guess. this is set in the computer configuration > admin templates > system / group policy section.
now remove the policy you have currently setup for your users on the users OU containing the rdp users. If you want you can move these users back to your main users OU.
when your users login to the RDP server the settings in the user section of the GPO linked to the RDP Servers OU will apply.
when the user logs in to their own computer the policies from the user OU and computer OU will apply - but not the more restrictive RDP OU.
hope that makes sense.
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn: -
VPRS Cost not pickibng only for single sales order
Hello Gurus
Goodevening every body
If we maintain two prices in material master one is moving average and another one is stanrdard price which price the system will pick in the sales order of my pricing procedure.
Note-Only for one sales order system is not picking VPRS cost in my sales when was doing testing and giving some message in condition analysis -VPRS 111 Condition ignored (requirement 004 not fulfilled)
I tried to analysis it but not able to come final conclusion this message
I am looking for your inputs
Thanks in advance
Regards
VenkatSomething wrong in the "item category" settings for that material.
Pls activate "determine cost" control in the item category setting.
Revert back for confirmation.
Rgds
Sumanth.Gururaj
Consultant/Systems Analyst - SAP SD/MM -
Can we use two pricing procedure for same sales area
can we assign two pricing procedure to the same sales area
please suggesthi all,
i am facing a strange problem
i m having some material which is under one division one distribution channel and one sale organization,and also the customer is same,but the customer some times taking the product for internal use of their company so they order it as general product and charging 4% tax on it
and some times they are asking product as spare and the spare is rate is hihg ,the tax is 12.5%then additional cess and exice duty is there
so the treat ment is totally different
can any body help me to solve this
shoud i make another division
should i make another distribution channel shoud i use another pricing procedure
should i use another order type to raise the order
please please solve the problem
now tell two pricing procedure will help or not???????????????
regards
subrat
[email protected] -
Error message during duplicate Pur Requisition creation for same Sale Order
Dear Experts,
I need your help to sort out a issue related to Stock Transport Order.
Our scenario is as below:
1) Sales order is raised first.
2) Stock transport requisition raised off in the background of a sales order automatically.
3) This PR turned into an Stock Transport Order PO manually.
4) Create delivery for STO from supplying plant and then GR is done in receiving plant. Create inter-company invoice.
5)Create delivery for sales order to issue the stock to end-customer and raise invoice.
This is standard scenario.
Problem comes when some smart uses manually creates another stock transport requisition again for same SO, which is turned into an STO. Means there is a duplication of STO PO.
My question to you experts, is there any standard way to prompt error or warning message, when users try to create purchase requisition manually for the same SO.
Account assignment category in PR is M - Ind. cust. w/o KD-CO.
Please suggest.
Regards,
PraveenHi!
Is it possible to create / configure a seperate PR document type for PRs created automatically from SO and don't give authorization to any user to create / amend the same manually?
Regards,
Riju -
Multiple deliveries for single sales order
Hi
Please share your thoughts for the following scenario:
A sales order has 10 line items and all schedule lines are confirmed on same date. Now I want to select 4 line items for one delivery and the rest of the line items with another delivery document.
I tried using Delivery groups, but not successful.
Thanks
SudduHi,
Let's say your 10 line items in the sales order are 10, 20, 30, 40... 100.
If you want to deliver first 4 line items you can directly do it using VL01N.
Go to VL01N.
Enter you sales order number.
Under Item section enter "From item" as 10 & "To item" as 40, so that system will automatically select item 10 to 40.
But imagine if you want to deliver 10, 30, 50, 70, then you cannot do that.
If that's the case, go to transaction VL10C.
Give your shipping point & in the sales order tab, enter you sales order number.
Execute.
Now you can see all line items appearing. Mark only those line items & create delivery from there.
Make sure you customer is allowed for multiple deliveries.
You can check that from XD02 / Sales Areas Data / Shipping tab under "Part|al del|very per |tem" field
Best regards,
Anupa -
Regarding single deliveries for Multiple sales order
Currently i m doing multiple sales order into one delivery & one invoice but we r facing that after doing the delivery in VL10A for the same custoemr still one delivery was not in the same delivery also i have confirmed the following criteria also
1. Delivery due date for the materials( schedule line tab)
2. Ship to party must be same in all Sales Orders
3. Shipping point must be same for all of them.
4. Incoterms should also be same.
5. Shipping Point should be same.
6. Confirmed quantity date at schedule line level
7. Delivery Priority
Pls helpHi,
is there any routines used in Copy controls from order - delivery .- re-check once.
as your post, everything seems fine. I didnt see any reason for not creating single delivery.
is it happening only with this customer or respective ship to's? if yes, something gone wrong in CMR - i.e. complete delivery / order combination etcc., ( just an assumption)
Regards,
ReazuddinMD -
HT204150 I have started randomly losing contact numbers, but not email addys for same contact
I have started losing contact ph nbrs, not the email address if there is one. But random numbers just disappear. Any advice?
Hello hwestphal,
Thanks for contributing to the Apple Support Communities.
It looks like you were not able to send iMessages to your contacts, and you've solved it by turning iMessage and FaceTime off and on again. It sounds like after this, your friend is not receiving iMessages because they are sending from your phone number.
Next, I'd suggest the steps in this article to make sure that your phone number is linked to your Apple ID (email address):
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support
Your friend may also want to try these steps on their iPhone when they are in range of cellular service.
Best Regards,
Jeremy -
Different billing document for Same Sales document
Hi guru's
I have scenario like this
Sales document is ZZOR for all countries but billing document will be different from country to country
Could you please light on this
Thanks and Regards
Srinivas KapugantiHi,
Now, as your requirement goes I can suggest you something on this as below:
Presuming you are doing delivery related billing as of now, then you need to maintain copy control between your delivery type to different billing types. Then while doing VF01 you need to manually select the billing type depending upon your country. Same thing will be applicable for order related billing as well.
Hrishi -
Vl10 - can not create delivery
Hi Experts,
I cannot create delivery through VL10 but can create through Vl01n for sales order line item. Scenario is given below;
Sales order confirmed Qty: 25 Pcs
Delivered Qty: 25 Pcs.
No limit to subsequent deliveries.
there is overage, means I want to deliver more qty against this sales order line item. But VL10 does not create delivery for this sales order line item. While I can create delivery through VL01n.
Any idea?
Thanks in advance.
Regards,
SAHi Erik,
It does not work.
Thanks,
SA -
Logical Aggregate Column (count(distinct)) Does Not Group for SQL Server DB
When utilizing the count(distinct column_name) aggregate function within a Logical Fact source in the Business Model and Mapping layer in the RPD file the output in BI Answers is not grouping correctly for SQL Server 2008 database sources only. All Oracle database sources represent the same aggregate column correctly within BI Answers.
I am using OBIEE version 10.1.3.3.3
Does anyone know how to resolve this issue?
Thanks in advance,
KyleI thought that I would update my current findings with this issue. If you display the report in BI Answers as a Pivot Table view the aggregate column displays properly, it does not in a Table or Compound Layout view for some reason. I am still working with Oracle Support on this.
Maybe you are looking for
-
..
-
Need help in xml bursting email bodt contents based on condition
Dear All, I have a requirement as below. I am developing a xml publisher report with bursting functionality, i need to set a email body based on some condition, so please help me out how i can set the email body dynamically in xml bursting file. Note
-
ORA-32034: unsupported use of WITH clause-issue
hello all, i am facing some issue when i use with clause and union all operator. i have created a dummy code to solve this problem.. my code is ---------- with dept_1 as (select deptno d1 from detp9 where deptno = 20) select empno from emp9 e,dept_d1
-
Hi All, When I'm deploying my project it showing above error. In my project I have created site columns, content type, List (by using vs 2013) and now my basic target is that i want to change newForm.aspx page to my new application page. For that I h
-
Get photos from iPhone one-way into iPhoto
I want to be able to load pics from my iPhone one-way-only into iPhoto *without* loading the iPhoto pics back into the iPhone... How do I do that, please? thanks