Collective reject for Purchase Requisition

Hi all,
How can I reject Purchase Requisition on ME55 without using workflow?
Best regards,
Munur

Hi,
ME55 is for collective release for PR. You can reject the PR by giving the desired code and select X button or reject in ME54. You cannot reject collectively in ME55. There is no reject button in ME55. Here we will give release code and release group and execute , the sys displays the list of PRS we can save these PRs as releaswe and select the status to need release by another code. Thanking you.
Edited by: Padmasri Garapati on Nov 17, 2011 6:53 AM

Similar Messages

  • Can't use Overall Release for Purchase Requisitions

    I have two groups, AA and ZZ.  Each group has it's own Class.
    Group AA uses Cost Center Class (CN)  (uses Characteristics Cost Center and Line Amount)
    Group ZZ uses Order Class (OC) (uses Characteristic Order)
    I have built one and only one Release Strategy for each of these Groups.  These Strategies both work successfully when I select the other group to be the group for Overall Release.  That is, if I set ZZ to be for Overall Release, then create a requisition, the release strategy for Group AA is applied successfully.  However, if I modify the req the strategy for ZZ, does not get applied.
    The opposite is true.  When AA is set to be for Overall release, then ZZ works.  However, if I modify the req, then AA's release strategy does not get applied.
    Again, both strategies work correctly when the other Group is set to be the one to use for Overall Release.  However, neither strategy works if its group is set to be the one for Overall Release.
    What am I missing?  I only have two classes, two groups, and two release strategies.

    SAP Standard system allows only 8 levels of release codes.If client requirement is more than 8 then for excess release codes customisation is done by the technical team (Abapers).Lets take an example of 15 release levels required for a client according to his Business needs then in this case initial 7 codes are customised and remaining 8 release codes are configured in the system.
    Release procedure is of two types
    Release Procedure without classification
                 This procedure is applicable only for Purchase Requisitions.
                 Here PR is released Item by Item only.
    Release Procedure with classification
                This procedure is applicable to PR,RFQ,Service Entry sheet,RFQ,PO,Contract  and scheduling agreements.
                Item by Item and Header level releases can be configured
                For PR - both item by item and Header level release can be configured
                For external purchasing documents - Release is possible only at Header level.
    Step 1:
    Create Characteristics
    In this step we need to create characteristics - conditions to be satisfied for triggering Release startegy.For example client has asked to set release strategy based on 3 inputs.Combination of value, Plant and Purchasing group
                1) Total value of PR more than Rs 50,000
                   create  characteristic as "Release_PR_total_value" in transaction code CT04.
                  Tab -  Basic data " Data type --- CURR currency format", "Decimal places - eg. 2 " and "currency  eg. INR or USD"
                  Tab -values key in > 50000 INR
                  Tab -  Additional Data-  Table Name "CEBAN" and Field Name "GSWRT"
                  Tab - Restrictions - class type - 032 - Release strategy
                2) Plant
                     Create characteristic "Release_PR_plant" in transaction code CT04.
                     Tab - Basic data - Data type - CHAR; Number of chars - 4
                     Tab - Values - Key in all the plants for which you are required to configure release proc.  eg. 1000,2000,3000
                     Tab - Additional data - Table name CEBAN and Field Name is WERKS.
                3) Purchaisng Group
                     Create characteristic "Release_PR_PurchasingGroup" in TCode CT04
                    Tab - Basic data - Data Type - char, Number of chars eg. 3
                    Tab - values - Key in all the purchasing Groups for which Release proc. is to be configured as required by Client.
                    Tab - Addnl Data - Table Name CEKKO and field name - EKGRP
    Step 2:
    Define class in transaction code CL02
    Menu path SPRO>Materials Mgmt>Purchasing>Purchase Requisition>Release Procedure>Procedure with Classification>Edit classes
    Here we assign all the above created Characteristics to a CLASS so that a release strategy to be triggered when all the conditions are met.
    Create a new class with free choice of names as "PR_Release_proc" in transaction code CL02.*Key in the class name and select class type as 032 - RELEASE STRATEGY then click on symbol create to enter all the details as mentioned below.
    Tab - Basic data - Enter description as "PR_Release-Proc",
    status- Released, Same classification - check the push button - Warning Message
    Tab- CHAR Enter above created 3 characteristics
    1.Release_PR_total_value
    2.Release_PR_plant
    3.Release_PR_PurchasingGroup
    step3:   
    Menu path is
    SPRO>Materials Mgmt>Purchasing>Purchase Requisition>Release Procedure>Procedure with Classification>set up procedure with classification>
    here define
    1.Release Groups
    Release group 01 is used for Purchase requisitions and 02 for Purchase orders.
    Here assign class "PR_Release_proc" against release code "01"
    check "OvRelPReq" indicator for over all release (All line items )of document in one shot else it will be released line item wise.
    2.Release codes
    Release codes are assigned to Release groups, in Workflow these release codes are tagged to users' SAP IDs through which they will be able to approve or reject a PR in SBWP(Inbox in SAP Business workplace.
    PRs are released by users in transaction code ME54N.
    Eg
    Type of user            - Level -             Release code                    
    PR creator - clerk or Business user -  
    Approver    -  Supervisor                 -   R1
    Approver  -   Project Lead              -   R2
    Approver   -  Asst. Manager             -  R3
    Approver   -  HOD/General Manager  - R4
    Release codes R1 to R5 are assigned to corresponding users.Manager R4 can only approve the PR if prior approvals till R3 are completed else not in ideal situation.
    For detailed info please refer
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
    3. Release Indicator:
    Release indicators show the release status of a Purchase Requisition.
    For detailed info please refer SAP Help official site
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
    4.Release Pre requisites:
    These define the order in which individuals or departments release the PR in sequence.
    3.Release strategies
    Create a new release startegy  eg ."A1" or "U1" , write its description PR release for value >1 lakh
    Now select release codes according to the Chart of Authority set by your client.
    Eg.
    Release startegy " A1 - PR release for value >1 lakh"
    R1 - Supervisor   
    R2- Project Lead    
    R3- Asst. Manager 
    R4- General Manager
    Now click on" Release  Prerequisites "push button and check all the boxes in ascending order.Save the document
    click on "Release statuses" push button, check release statuses then click on "Continue" push button.
    In third push button you can maintain CLASSIFICATION data or later you can directly mainatain in transaction code CL20N for this strategy.
    Classification data for example
    1. Value - > 100000
    2. Plant - 1000,2000,3000 etc
    3. Purchasing groups - 101,102,103 etc
    By clicking on "Release Simulation" push button you can check whether release is getting affected for configured release codes or not.
    In this way you can configure all the required Release startegies.
    Now create a PR in T code ME51N with the above conditions then a new tab will appear in PR creation screen at the time of check.Save the document and this can be released by respective users in TCode ME54N.
    Tcode - ME54N - For Individual Release
    Tcode - ME55 - For Collective Release
    For detailed info please visit SAP HELP website
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
    Regards,
    Indranil

  • Workflow for purchase requisition release strategy

    Hi all,
    I need an urgent help on Workflow for Purchase Requisition Release. The requirement is that when a purchase requisition with a given combination (Purchasing Group, Material Group and Account Assignment Category) is created and saved, it should trigger a workflow for approval of release or rejection to one specific business manager. If he dont responds in 2 days, it should be sent to other business manager. If any one of them releases the requisition, it should send a mail to the requestor that the requisition is released. And if it is rejected, then also a mail to be sent to the requester informing that his requisition is rejected...
    Can anyone take some pain and guide me step by step procedure to implement this or to use any existing one.... I know its BUS2009 thats used in this but really dont know how to implement it properly.
    Its urgent...
    Edited by: Hima on Apr 11, 2008 12:45 PM

    Check this link
    http://help.sap.com/saphelp_47x200/helpdata/en/04/92762546f311d189470000e829fbbd/frameset.htm
    Thanks
    Arghadip

  • Release strategy for purchase requisition does not kick in

    Hi Gurus!
    I've been struggling with this issue for some weeks now.
    I have set up the release strategy configuration for purchase requisitions with classifications.
    However, if I create a purchase requisition the release functionality is not taken into account by the system.
    See below some more information regarding my configuration:
    1. I've created a new characteristic "REL_PR_GROUP". Status: released, Multiple values, Number of Chars 3, 7 values (TR1, TR2, TR3....TR7), Table name: CEBAN, Field name: EKGRP, Procedure for value assignment set to not ready for input.
    2. I've created a new class: "REL_PR_ANPC". Class type 032, Status: released, Same classification: do not check, Char: "REL_PR_GROUP"
    3. I have one release group "T1", Rel. object 1, OverReqRel is marked, Class: "REL_PR_ANPC"
    4. I have 5 release codes. Grp: T1, Code: 01....05
    5. I have 2 release indicators:
    "R = Released", Rel. for ordering is marked, Changeabil: 4, Value chgs. 100,0
    "X = Blocked",  Changeabil: 4, Value chgs. 100,0
    6. I have 1 release strategy:
    "T1 with Grp T1"
    - one release group, 01 Manager
    - release prerequisites not applicable because of only one release group
    - release status, nothing marked = blocked, 01 marked = released
    - classification, purchasing group is TR1 or TR2 or TR3 or TR4 or TR5 or TR6 or TR7
    I intentionally kept the configuration as simple as possible so I can try to get it working first.
    Now if I create a purchase requisition for an item with release group T1, I would expect the release strategy to be activated. However, this is not the case. I don't see the "release status" tab in the PR, and if I try to relase via ME54 the system says the PR is not relevant for release.
    Could you please assist in getting this working?

    Hi,
    Have you checked in CL30/CL30N if your release strategy is derived successfully?
    See section 3 of Note 365604. A small section of it:
    You can use transaction CL30 search for an object using the data
    of the purchase requisition/purchase order. Here, it is important
    that the object search determines exactly one strategy. If this
    is not the case, this indicates that there are overlapping
    strategies in the system or that the release strategies in
    Customizing do not correspond with those from transaction CL24.
    See the previous point. If the object search returns more than
    one result, the system subsequently determines an incorrect
    release strategy or no release strategy at all.
    If it is derived successfully, next, check the user exit EXIT_SAPLEBND_001 as per Note 371667:
    The following assignment statement has to exist within activated SAP
    enhancements M06B0002 (include zxm06u13) and M06B0005 (include zxm06u31)
    for purchase requisitions:
         E_CEBAN = I_CEBAN.
    Regards,
    Purnima.

  • No selectable items exist for purchase requisition l_banfn

    Hi,
    While creating PO with ref to PR getting the below error :
    no selectable items exist for purchase requisition l'banf .
    Checked if the PO is created, its not created,.
    checked if the item is blocked/cancelled/deleted. Nothing is set.
    PR looks fine. Dont know if any authorization data is missing?

    Check the status tab in ME53N whether all the qty in PR are already used up
    Or
    Check the line item in PR whether it is deleted
    Edited by: Karthik on Jul 20, 2011 12:37 PM

  • Table for Purchase Requisition Item Text

    I would like to know, what is the table which stores the item text in tab texts for Purchase Requisition?

    Hai,
    the table is STXH.
    CALL FUNCTION 'READ_TEXT'
          EXPORTING
      CLIENT                        = SY-MANDT
            ID                            = IT_STXH-TDID "ID
            LANGUAGE                      = IT_STXH-TDSPRAS " LANGUAGE
            NAME                          = IT_STXH-TDNAME
            OBJECT                        = IT_STXH-TDOBJECT
      ARCHIVE_HANDLE                = 0
      LOCAL_CAT                     = ' '
    IMPORTING
      HEADER                        =
          TABLES
            LINES                         = L_LINES
    Regards,
    Venkat

  • Regarding report for purchase requisition

    Hi gurus,
          I am preparing a report for purchase requisitions using SQVI. I am almost done with it but I was stuck at one thing. Our client criteria is to see it by name like they wanted users to view only purchase requisitions they created. They dont want all users to see purchase requisition created by other users. I dont know how to do that. Can anyone help me out with that.
         let me know if I am not clear about anything.
    Thanks in advance.
    Ravi Teja Boppana

    Hi,
          I added the field ERNAM from table EBAN. But the problem I am facing with it is any user can enter any user name in that field. Either I need that feild to be filled automatically with the username who logged in so that I can hide that field if that can be changed or filled automatically and cannot be change by user. Is there any option I can do like that. If I create a report in SQVI no one else except me can see that report, so I need this report in that manner.
          Let me know if i am not clear,
    Thanks in advance,
    Ravi Teja Boppana

  • Report - who is the current approver for purchase requisition

    Hi Experts
    Is there a report that can give information the status / who is the current approver for purchase requisition?
    currently if we open the PR directly, we can only know the release strategy, release code, status of approver, but we cannot have the information who is the person that should approve this PR.
    Thanks in advance
    Prashanth.v

    Hi All.
    Unfortunately we want to have this information for our end user, and they will not have the access to SE16.
    Another thinks is from CDHDR we will have the information if changes are made in PR. So it will give information user that already approve the PR
    What we want to have is a report of outstanding PR (not yet released) that have information who is the user (the user complete name / user id)  that should approve the PR.
    Thanks In Advance
    Prashanth.Venkategowda

  • Account assignement category for purchase requisition - error message

    Hi All!
    I created a new Item category in service order (IW31) "O" with the account assignment category "O". If I don't set the Consumption posting indicator to V for this category, when I set the account assignment category "O" to the purchase requisition in <i>Plant Maintenance and Customer Service-Maintenance and Service Processing-Maintenance and Service Orders-General Data-Define Account Assignment Category/Document Type for Purchase Requisitions</i>, I receive the message:
    <b>"Acct. assign. cat. "O" for purchase req. does not exist.
    Message no. CS 075"</b>
    The client request is not to charge immediately for the goods receipt with the relevant costs the service order. The client wants to create the goods receipt in a storage location for the plant and then confirm the components and charge the costs after the component confirmation (movement type 261) - similar to stock material.
    Any idea about what should I do?
    Thank you.

    Hi Everyone,
    The problem is solved now. The cause was that the test requisition that I was making was satisfying more than one rules and hence I end dated the remaining rules which solved the problem.
    Thanks!

  • SAP  workflow for purchase requisition and purchase  order

    Hello  Sap Workflow,
    Can you  please help me on  building workflow for purchase requisition and  purchase order    with  the necessary screen shots  ?
    your quick response  will be greatly appreciated.
    Thanks in Advance

    Hi,
    Please check http://help.sap.com .
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/04/92761846f311d189470000e829fbbd/frameset.htm
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/04/92775546f311d189470000e829fbbd/frameset.htm
    Configuration guides are available in SAP Solution Manager.
    Regards,
    Masa

  • FM for Purchase requisition status

    Hi,
      Is there any FM for Purchase requisition status.
    Do let me know.
    Regards,
    SP

    Hi,
    Check this FM, hope this will solve ur problem.
    'BAPI_ACC_PURCHASE_REQUI_CHEC'

  • AME for Purchase Requisitions

    Hello All
    I am in the process of setting up AME in R12.1.2 for purchase requisitions and got struck with an issue
    My requirement is to route the requisition to a particular job based on the item category and the requisition total. I setup conditions, action types and approval groups and then the rule.
    When I used static in my Approval Group setup it works fine with out issues however we do not want to use static as employees keep changing and want my approval driven out of the job hence updated the approval group to use Dynamic usage type and used the below query to pick the name of the employee based on the job.
    select papf.full_name from per_all_assignments_f paaf, per_all_people_f papf, per_jobs pej where
    paaf.person_id = papf.person_id
    and sysdate between paaf.effective_start_date and paaf.effective_end_date
    and paaf.job_id = pej.job_id
    and pej.name like 'IT.Group IT Operations Manager.Staff'
    Now when trying to create a requisition it shows up a message that "Approval List could not be generated. Please contact your System Administrator to review AME rules setup."
    When validated the above query it says query is valid but still not working. I even tried with person_id but still no luck
    Thanks a ton in advance
    Regards
    Dilip

    Hi Dilip,
    Pl. visit following links.
    AME for iProcurement requisitions
    Re: AME-Hierarchy Deciding Feature ?
    HTH
    Sanjay

  • BADI for Customer's own screen for Purchase Requisition.

    Hi All,
    I have a requirement where I need to create a BADI implementation for creating addition screens in the Purchase Requisition Transaction (ME51n/ME52n/ME53n).
    I know there are User exits but we donu2019t want to implement them. Now in case of PO there is a standard SAP given BADI -> ME_GUI_PO_CUST for Customeru2019s own screen but as far as my understanding goes there are no such BADIs for Purchase Requisition.
    Could anyone please advice if I can create a Custom BADI similar to ME_GUI_PO_CUST for PR for adding the screen and throw some light on it like how can this be achieved?
    Thanks,
    Ameesha

    Thanks Darek for replying back and the BADI   ME_BAPI_PR_CUST looks helpful but could you please help me in understanding how can i create my own custom screens within ME51N / ME52N / ME53N tcode using the BADI , ME_BAPI_PR_CUST.
    For example in PO, we have the BADI   ME_GUI_PO_CUST, with several methods like SUBSCRIBE and others which we can make use of for creating screen exits but what in the case of PR fpr BADI  ME_BAPI_PR_CUST. i couldn't find any sample code for implementing this.
    Any help is greatly appreciated.
    Thanks,
    Ameesha

  • Custom Event for Purchase Requisition Create, Change & Delete

    Hello Experts,
    I want to create a custom event which triggers on Purchase Requisition Create, SAP provide's standard event's for purchase requisition release but not for create.
    What are all the steps and how to create a new event.
    Thanks in Adavance,
    Sandhya.

    Hi Sandhya,
    may i know the reason why you are trying to create custom methods.
    You have business object BUS2009(for PR line item wise release) and BUS2105(for PR overall release).
    Both those business object have events RELEASESTEPCREATED (for PR creation) and SIGNIFICANTLYCHANGED(For PR change).
    Even then if you want to create custom events, create a subtype of the standard business object, then click on events, and then select create. Now create your Z-events, say ZCREATED (For creation), ZCHANGED (for changed) and ZDELETED (for deleted). Now select each event, click on edit -> Change release status -> object type component -> to be implemented. Follow the same for all the events. Then select each event, click on edit -> Change release status -> object type component -> to be released.
    Now click on your custom object, click on edit -> Change release status -> object type component -> to be implemented.Then click on your custom object, click on edit -> Change release status -> object type component -> to be released.
    After this in SWEC tcode, click on new entries. Select change document object as BANF, business object as say ZBUS2105 and event as ZCREATED. make sure radio button on create is checked.
    Similary create entries for ZCHANGED event and ZDELETED.
    Select on change and on delete radio button for event ZCHANGED and ZDELETED event respectively.
    let me know if you have any queries.
    Regards,
    Raj

  • "No selectable item exist for purchase requisition I_Banfn"

    Dear all
    While creating Po system show a massage"no selectable item exist for purchase requisition I_Banfn"
    Please help.

    Hi,
    PR status in status TAB in item details  You have following:
    Processing status :Specifies the current processing status of the purchase requisition: IS PO Created or RFQ created etc...
    Block ID:The requester (PR creator)can block a requisition item to prevent it from being converted to a purchase order
    Processing State: Released or not Released
    You need check above & then act to unblock if blocked , release it if it is not released  or check if this PR already converted to PO.
    Follow the steps to create PO from PR:
    Enter ME21N T.Code
    Click u201CDocument Overview onu201D
    Click u201CSelection Variantu201D and Select Purchase requisition and double click & Execute
    Now  you will PR Numbers,Select your PR Number , you will have line items(10,20,30 etc..) , you will have all the details of PR (like item category,material , quanitites for each line items) and Now click u201CAdoptu201D and u will see all PR related copy to PO.
    Regards,
    Biju K

Maybe you are looking for