Collective scheduling for planned order

Dear Gurus,
i create the planned order using the bapi standard whit the production version , but when create the new planned order the version don't is read in the order, ( BOM + ROUTING ) OF THE version.
For read the production version you must reschedulling the planned order.
Are there the methods for read the production version at the creation of the panned order ,
or the strument for rescheduling collctive?
Thanks a lot
Daniele Pistilli
PP TEAM

Dear Gurus,
thanks for indication of the material master, but we don't always manage the versions of productions.
For the production order there are the routing without the production versions, but when i create whit the bapi or whit the transaction MD11 the new planned order manually i need setting the production version , but when i setting the version for the find the version ( bom+routing) i must re-scheduling the planned order.
Are there the BAPI or alternative soluction for re-scheduling the planned order collective, or for read directly the version present in the BAPI ?
Thanks a lot
Daniele Pistilli
PP TEAM

Similar Messages

Scheduling for planned order

When I choose leadtime scheduling in MRP RUN then system does forward scheduling always.
Then in planned order change mode when i do manually do scheduling then it does backward scheduling as per settings in OPU5.
How to get backward scheduling in MRP.??

Dear,
MRP do the backwordscheduling but The system always determines the basic dates for planned orders using backward scheduling.
The system automatically switches to forward scheduling if the determined start date lies in the past.For this you have to maintain 2 settings.
1)In OPPQ - Plant parameters maintain the indicator for start date in the past allow. 2) In OPU3 for your plant & order type , maintain the no. of days for start date in the past.
Hope clear to you.
Regards,
R.Brahmankar

Scheduling for planned order & production order

Hi,
I am not using fully routing.
I have given requirement.
08.2009--- 100 MT
09.2009--- 100 Mt
When I run MRP system always schedule FRom 01.08.2009 to 31.082009 .How to made settings.
I have maintained In house production date 30 days.Forward scheduling.System always calculates from the current date,If I given oder start in past is activated in customizing take as 01.08.2009 as order finish date.
Guide me
Regards
bhuvan

Hi bhuvan,
That is because of your requirement date.
Which are 08.2009 and 09.2009
08.2009 means your finish materials should be ready for delivery on 01.08.2009 similar way 09.2009 material should be ready for delivery on 01.09.2009.
System always schedules the orders to meet the requirment dates.you may find exception msg like rescheduling in(10) or Plan process according to schedule (30) along with those plan orders.
Regards,
Dhaval

Scheduling of planned order and Production order

Dear PP gurus,
I have run MRP , after running MRP, system has created planned order. These planned order dates are schedule by the system in 2015....I am not able to understand. how? . When i double click on
planned order order and try to convert it in production order those dates get copied into production order.
DO i need to change the dates thr? or keep the same dates which the system is giving>
I m going wrong somewhere. please tell me where and   what is config for scheduling for planned order and production order?
Please tell me step by step procedure
Regards
Edited by: Aadi1981 on Apr 1, 2010 9:02 AM

Thanks for replying,
I have done the below setting for shceduling. Kindly check and let me know any setting needs ot be changed or incorect
FOr scheduling production order , i have configured below settings in OPU3
In OPU3 ,
Detail scheduling tab
Scheduling and Generate cap req tab is checked.
then
adjust scheduling , adjust dates tab,    : adjust basic dates , adjust dep , reqt to operation date is selected
scheduling type is backward.,
Automatic scheduling tab is checked.
In OPU5
Scheduling of PLanned order
Scheduling and Generate cap req box is checked (selected)
Adjust scheduling
Sheduling level: via detail scheduling
adjust dates:     adjust basc dates , adjust dep reqt , req to operation dates
For capacity scheduling ; always basic dates, dep reqts to operation dates
scheduling type ; backwards
apart from this do i need to do update ca96/ ca97?
best Regards
Edited by: Aadi1981 on Apr 3, 2010 7:42 AM

User exit/ badi needed for planned order create/change,collective ATP check

Dear All,
I'm looking for a user exit/ badi which can be used for planned orders at the stage of
mass collective availability check (COMAC tcode) update; or at some other relevant stages of mass update of planned orders.
I need after collective availability check to perform the following:
1) to copy date from "total comitment" field on header tab of planned order and paste it (replace old date) to order finish date on header screen
then
2) to start a scheduling.
Very appreciate your help.
Best Regards,
Andrey
Edited by: Andrey Kruglov on Apr 15, 2010 3:06 PM
Edited by: Andrey Kruglov on Apr 15, 2010 3:07 PM

Dear,
Use the BAPI : BAPI_PLANNEDORDER_CHANGE
Or use the function module MD_SET_ACTION_PLAF for Schedule planned order.
and the transaction MDAC Execute action for planned order
This function module includes the following actions:
Explode BOM
Explode BOM, check availability
Check availability, only explode BOM in the case of a requirement
Check availability, do not explode BOM
Reset availability
Change planned order data
Schedule planned order
Delete planned order
Assign the key for the respective action control to the materials in the material master (MRP 4 view).
Please refer this thread,
Re: MDVP for collective orders
Regards,
R.Brahmankar

MRP-Delivery Schedule for Sales order is not updating in Production order

Dear Experts,
I have created Sales order and maintained delivery scheduling, Then Run MRP through MD50,
We received Planned order then through this we have converted to Prodcution order.
When we observe the delivery schedule for sales order under assignment Tab in Produciton order which is showing zero instead showing line item of Delivery schedule.
I am able to see Sales order and Line item but i am not abel to get any delivery schedule line item.
Please suggest where settings are missing.
Thanks in advance
Regards
Don

Dear Experts,
Please provide me solution.
after Running MD50 transaction against Sales order.
If I maintained different Scheduling Line Item for First Line item of Sales order.
The Respective Scheduling Lines should update against Each Production order which has converted from Planned order.
Thanks in advance.
Regards
DON

How to connect MAPL and PLPO to derive work center for planned order

Hi,
Anybody know how to derive work center using MAPL and PLPO for planned order (PLAF). Is there any connecting table between MAPL and PLPO.
Please help asap.
Regards,
Mitali

I guess u r trying to view the detail scheduling info (tab in MD13) for a planned order . In that case -
1. Go to PLAF and enter the planned order number. (PLAF-PLNUM) and get the ID of the capacity requirements record (PLAF-BEDID).
2. With this PLAF-BEDID go to KBED. pass the value here. KBED-BEDID. The KBED-ARBID values are your work center ID.
3. To get the work center texts ( the way is appears in the screen) - Pass this value to CRHD . CRHD-OBJTY = 'A' ( i.e Type work center) and CRHD-OBJID = KBED-ARBID.
Hope it solves ur prob.
Cheers
SKC

REM scheduling in planned order

Hi,
I am using repetetive manufacturing. I have maintained Forward scheduling in transaction OPU5 and selected the selection ID 02 for rate routing for detailed and rate based scheduling.
Planned orders are created from MRP. When I check the planned order deatails, in the Det.Scheduling tab it shows scheduling type Forward and in the Production rates tab it shows backward scheduling. I have maintained Forward scheduling in OPU5. So the production rates tab shows different scheduling type. How?
can any one explain this.
thanks and regards
murugesan

HI
Check the entry parameters for the planning table in OS80 .
check and revert
Regards
Anupam Sharma

Masss Scheduling of Planned Order

Hi
Is there is any transaction for Mass Scheduling of Planned orders preferabaly at plant level.?

Dear Mayuresh,
In my understanding there is no T Code to schedule as set of planned orders
This will impact on the other reciepts and only during MRP rescheduling happens.
But also have a check the FM that Mr.Brahmankar has suggested.
Dear Rupesh,
Do u think even if you have an action plan and execute MDAC will it help to schedule the planned
orders?
Regards
Mangalraj.S

Creation of Reservation for planned order

Hi Team,
Is it possible to create reservation for planned orders after MRP run?
My opinion was the reservation can only be created with reference to production order after MRP. The reservation can not be created with reference to planne dorders after MRP run because planned orders are intermident document which will not exist in the system always. The planned order details will not be available in the system once it get converted into production order.
How the reservation will be processed which was created with reference to planned order after converting the planned order to production order?
Kindly need ur guidance.
Thanks
psk

Dear PSK,
In a typical discrete manufacturing setup production orders are the promised receipt for which reservations gets generated as
soon a production order is created.But only if the order is released goods movements can be posted against the reservation
details through MIGO/MB1A for 261 movement.
It's not required to create any reservation at the planned order level or which may not help you in any means to your business.
But however in a REM scenario MF60 is used to create stock transfer reservations for 311 movement where planned orders
are used for production backflush.To explain in detail even without any planned orders you can do a stock transfer reservation
for a production quantity.
Check and revert back.
Regards
Mangalraj.S

How to set collection schedule for metric thresholds

Greetings All,
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
Windows Server 2008 R2Please know that I am a newbie when in regards Enterprise Manager (any version).
I am trying to use EM-Database Control version that was installed when I installed Oracle.
I am trying to activate e-mail notification when tablespace(s) usage exceeds set thresholds. Specifically the locally managed tablespaces.
I found the Metric Thresholds page, and I found the “Tablespace Space Used (%)” metric. Note this is NOT the “(dictionary managed)” metric.
I do have e-mail and credential information established.
I found where you can identify a SQL script to be executed for corrective actions for the warning and critical thresholds. However I don’t want to execute any corrective action, I am just interested in the e-mail notification.
I know I could setup a SQL script that would send an e-mail but from my reading/research I believe that e-mail notification should automatically take place so long as e-mail and credential information has been established, which has been established.
My question is:
I can find now way to set a Collection Schedule. The dictionary managed tablespace metric has a collection schedule link (i.e. Every 15 Minutes), but the non-dictionary managed tablespace metric(s) has none.
Clicking the edit icon(s) provides no way of setting the collection schedule.
Where/how do I establish a Collection Schedule for this metric?
Thanks for your time,
Bob

Hi Bob,
With Grid/Cloud Control you can modify the collection frequency (interval) for the Tablespace Space Used (%) metric for locally managed tablespaces; however, you cannot do the same in DB control.
That being said, alerts from the metric are server-generated alerts, which are generated from the monitored database target. When the space used percentage exceeds the Warning or Critical threshold, assuming you have subscribed to an appropriate notification rule for email notification, you should receive an email notification in about 1 minute or so.
The following doc may help explain more about server -generated alerts:
http://docs.oracle.com/cd/B28359_01/server.111/b28310/monitoring001.htm#CIHCAGAJ
Regards,
- Loc

Extractor for Planned order

Hi Experts,
I am looking for the stabdard extractor for the Planned order, Basically I need the fields from the table PLAF.
Please let me know any standard extractor available or any extractor need to enhance.
Thanks
sai

Hi Sai,
Take a look at 2LIS_04_P_MATNR and see if it is usefull:
http://help.sap.com/saphelp_nw70/helpdata/en/88/7fc73c0c52085be10000000a114084/frameset.htm
Else it seems that you should create a generic extractor directly on the table according to this thread:
Re: Extractors for Planned orders and Proces Orders
Hope this helps.
BR
Stefan

Field setting when collective conversion from planned order to PR

Dear expert:
Is there any way(except ABAP enhancement) to add the field "tracking number" in MD15 when I conduct collective conversion from planned order to PR. Seems in standard config this field in not included in this screen. I have set this field as a mandatory field, but even though when I conduct the conversion, this field still can not be displayed in the MD15 conversion screen.

Hi,
There are following T. Codes to convert Planned Order to PR;
MD14 - Individual Conversion
MD15 - Collective Conversion
MDUM - In Background
Also MD04
User Exit is LMDZU001 - User exits in additional planning

Table For Planned Order Details From PP Module

In our organisation we are taking Plan Vs Acheivement from Production. So, intialy we taken Plan details from "PLAF" Table and Acheivement details from "S225" Table. But After running MRP at month end. Previous month plan get deleted and new order create.
how to get history data for Planned order.
Please help us.
Regards
Naga

I don't think that there is any history in regard to planned orders. PLAF will get rebuilt according to your MRP parameters and I don't believe that the data is stored.
Regards,
Rich Heilman

Changing MRP controller for planned order

Hello experts,
Is there any way the planner could change the MRP controller of a planned order within MD12 ? We are using ver 4.7 and this field is not enabled. Currently the planners are creating prod orders much in advance and are looking to move to a process where they firm planned order. We are using project stock planning structure so more that one planner may create orders for the same material. So when one planner review the material planning for one project he would firm the planned order and assign it to him for leater conversion.
Note: I the config I didn't saw any field selection control for planned orders.
Thank you in advance for sharing your wisdom.
Francois Paquet BPA
aeronautive industrie

Francois,
Very interesting question. However I never had to change those fields in either planned or prodcution orders.
Both orders master data fileds are disabled.
However since your are working with project orders ( or netwrok orders ) system would be giving you specific planner order hard tied to the project order ( similar to Made to order scenario).
Planner could use MD51 ( project planning ) & MD4C ( option for Netwrok or WBS element ) for monitoring progress of his /her order.
This way planners do not have to go by MRP controller data.
Hope this provides some new thoughts.
Thanks,
Ram

Collective scheduling for planned order

Similar Messages

Maybe you are looking for