Collector Configuration for Sybase - history retention for DB growth

Hi Experts,
We need to modify the history retention in the DBA Cockpit for database growth. Could you specify which Data Collector is responsible for this data?
Thank you!
Best regards
Janos

Similar Messages

Collector Configuration for Cisco LMS

Hi,
I have a cisco LMS 3.2 , what collectors need to be configured inorder to get the critical alarms such as HighBroadcast Rate in network

Device Fault Manager (DFM) is the module or application that would give you these kind of alerts;
a quick overview about DFM can be found here
first I recommend to install all available updates and patches for LMS;
after the initial discovery of LMS to get your devices into DCR you have to import device into DFM as described here
DFM is working with SNMP polling, thus you should get the events in the AAD (Alerts and Activities Display) if DFM has SNMP access to your devices;
Be aware, that DFM counts non-unicast packekts for the HighBroadcast Rate (broadcast and multicast packets; ifInNUcastPkts + ifOutNUcastPkts)
also read the user guide for DFM to get a general understanding of DFM

Physical DB Configuration for 11g

Hi,
Can someone please let me know what can be the good configuration for designing a Database of size 1TB in 11gR2.
1) How much size we can allocate for Undo tablespace keeping the undo retention value to default
2) How many redo groups and how many members per group considering the log switch are not very frequent ( 2-3 groups should be enough and 2 members per group and each member can be 200MB. Let me know if we can design it in a better way)
3) Size of system,sysaux and temp tablespaces
Thanks in advance.

Its not so easy to answer your question if you are gonna create a 1TB database fresh.
But as you had estimated the size of the database;I presume you have a similar set up (production/staging/dev/test).
So perform the follwing in order to decipher your concerns:
1) How much size we can allocate for Undo tablespace keeping the undo retention value to default
Sizing an UNDO tablespace requires three types of information; viz:
--Number of undo data blocks generated per second (UPS)
--UNDO_RETENTION in seconds (UR)
-- Overhead varies based on extent and file size (db_block_size) (DBS)
UndoSpace = [UR * (UPS * DBS)] + (DBS * 24)
In this UR and db_block_size can be obtained from pfile or spfile.
The third piece of the formula (UPS) requires a query against the database. The number of undo blocks
generated per second can be acquired from V$UNDOSTAT.
The following formula calculates the total number of blocks generated and divides
it by the amount of time monitored, in seconds:
SQL>SELECT (SUM(undoblks))/ SUM ((end_time - begin_time) * 86400)
FROM v$undostat;
Column END_TIME and BEGIN_TIME are DATE data types. When DATE data types are subtracted,
the result is in days. To convert days to seconds, you multiply by 86400, the number of seconds in a day.
The result of the query returns the number of undo blocks per second. This value needs
to be multiplied by the size of an undo block, which is the same size as the database block
defined in DB_BLOCK_SIZE.
The following query calculates the number of bytes needed:
SQL> SELECT (UR * (UPS * DBS)) + (DBS * 24) AS "Bytes"
FROM (SELECT value AS UR FROM v$parameter WHERE name = 'undo_retention'),
(SELECT (SUM(undoblks)/SUM(((end_time - begin_time)*86400))) AS UPS FROM v$undostat),
(select block_size as DBS from dba_tablespaces where tablespace_name=
(select upper(value) from v$parameter where name = 'undo_tablespace'));
NB: The above described UNDO calculation is compiled from Metalink Note : 262066.1
2) How many redo groups and how many members per group considering the log switch are not very frequent
(from Metalink Note : 781999.1)
An excerpt from the Oracle Database Performance Tuning Guide provides the general guideline.
"It may not always be possible to provide a specific size recommendation for redo log files, but redo log files in the range of a hundred megabytes to a few gigabytes are considered reasonable. Size your online redo log files according to the amount of redo your system generates. A rough guide is to switch logs at most once every twenty minutes."
So if your online redo logs (for example) switch once every 5 minutes during peak database activity, to achieve the 20 minute guideline, the logs would each need to be 4 times larger then their current size. (i.e. 20 / 5 = 4)
3) Size of system,sysaux and temp tablespaces
i) SYSTEM tablespace's size - dont have much idea; what should be the minimum size of the SYSTEM tablespace. But in most of the cases a size of 500 to 600 MB should be fine
ii)SYSAUX tablespace's size - Default size for SYSAUX is 210Mb. Once again; most of the case a size of 400 to 500 MB should be fine
iii)TEMP tablespace's size - You have to monitor the TEMP space usage continuosly in order to zero on an optimal size.
You can query DBA_TEMP_FREE_SPACE for this in order to get how much TEMP space is allocated and how much is free.
SELECT * from DBA_TEMP_FREE_SPACE;
TABLESPACE_NAME TABLESPACE_SIZE ALLOCATED_SPACE FREE_SPACE
TEMP 250609664 250609664 249561088
Hope this helps
Regards
Shamseer
[email protected]

SAP DMS - How to do an external DMS configuration for the existing system ?

Hi All.
Greetings.
Request help and understanding.
Am new to the world of SAP. And request SOME clarity for understanding of DMS.
We are wanting to put an external DMS server and wish to configure for the same.
So that the load on the production SAP R/3 database is reduced.
We are now wanting to test the same on Dev environment.
From SDN Link :
I understand that :
DMS basically has a content server. which stores documents.
That can be accessed through Web, SAP R/3 Gui , SAP Portal.
I have gone thro various links and the following links i have found to be informative and helpful :
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm
http://wiki.sdn.sap.com/wiki/display/PLM/DMS+Customizing
http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
However, would like to know the following because am not getting the clarity :
1) Is there any supported platform / compatibility guide for DMS ?
if yes, can someone send me the link?
2) We have oracle 11g as our for SAP R/3 backend.
Windows 2003 server 64 bit system.
When i check the system status on the dev server of sap.
It says. ECC 6.0 Rel 7.00 update 20 (hOpe am reading it correctly)
After much search on the SMP site,
we finally discovered and downloaded the DMS software for unicode and / 64 bit.
Which we saw under the maintenance components separately seen for DMS 7.0
Now for this DMS content server which we would like to make it external for storage of documents -
do we need to have a separate database for this purpose as a repository.
If i run a setup of DMS - will that automatically install any default repository for this or
will it allow me to choose any other repository for the same ?
Can anyone advise on this.
Because this link says content server is based on Instance of MAXDB : http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
3) I read some thing like this on some of the SDN links :
P40 - Integration of DMS
P62 - R&D Document Manage¬ment and Workflow
P71 - Document management
What are they referring to.
4) We would be accessing these thro web, gui, customised portal.
This content server configuration is a bit confusing.
5) Is SNC configuration required to be done for the separate DMS server setup.
If yes, how to do that ? any configuration link for that please ?
Can anyone advise on the things to do.
Steps to do.
What all are the pre-requisites to check, before we start the set up of DMS.
Can anyone help me understand this whole thing regarding the DMS installation and configuration.
Step-wise.. from the start to end.
Because it gives me a lot of uneasiness without having everything in place before we could say we could start the whole process of configuration / installation.
Many thanks for your help in advance.
Wishing you a happy and relaxed weekend.
Kind regards
Indu

Thanks christoph & pradeep kumar.
did a few more research and atleast have come to understand that.
DMS server installation has content server which works only with MAXDB.
So my understanding is correct.
And what we see as Easy DMS is a client installation.
which probably i would look at at a later stage.
Found this link to be a little more informative :
http://www.sapfans.com/forums/viewtopic.php?f=12&t=330558
I really wish. That life were to be so easy. To call a consultant and finish it off
Wishful thinking
thanks and cheers
indu

How to have Multiple Configurations for a Flex Application

Hi All,
I've seen this question asked in various forms multiple times, but never answered: How do you set up a FLEX configuration to have different configurations for development (local), test server, staging server, beta server, and production server? I cannot imagine that Adobe has not accounted for this, something that is very standard in most development teams. Zend Framework has a very elegant solution for this: in the configuration file you define all aspects that can be configured, as well as the various environments (development, staging, beta, live, etc.). Then, in the bootstrap file you specify which environment you want to work in, and you're all set.
How can something like this be achieved in FLEX?
Many thanks!
-Mike

Maybe my setup is unconventional, I doubt it, though:
1) SVN repo stores FLEX and PHP codebases in separate projects.
2) Developer gets code from repo, and runs on local machine. -> need to configure FLEX to point to local PHP code here for Remote Objects.
3) Developer then publishes Flex app to staging server. -> need to configure FLEX to point to staging PHP code here.
4) Flex app then gets published to live server. -> need to configure FLEX to point to live PHP code here.
Now, using ANT, the scenario would look like this:
1) SVN repo stores FLEX and PHP codebases in separate projects.
2) Developer gets code from repo, and runs on local machine. -> need to configure FLEX to point to local PHP code here for Remote Objects.
3) Code is good and developer checks it back into SVN.
4) ANT extracts latest build from SVN and builds it, then publishes to staging server. -> need to configure FLEX to point to staging PHP code.
I am using PHPUnderControl as my build server for PHP.
I am also unclear as to how my goal could be achieved using ANT?
Thanks!
Mike

ASA 5505 configured for WebVPN connecting to Citrix Web Interface

ASA 5505 configured for WebVPN connecting to Citrix Web Interface.
i have a ASA 5505 that I am attempting to configure for WebVPN with passthrough into Web Interface . The user authenticates into WebVPN OK and gets the option to click on the Citrix Link (which is i add bookmark citrix server http:// 172.30.40.5.) i enter the citrix and then for example i want to open to outlook it can not open. (when i want to open some application no application is open)).there is no alarm at asa. how i solve this issue?
thanks.

Teymur,
Can you confim that after disabling the ssl/tls on the Citrix server (secure connectivity) that you are getting exactly the same error. It is possible that it is generating a different error.
The bug where we have see the existing error was CSCtf06303 but that has been fixed in 8.4.1. Can you confirm the exact version of code you are running on the ASA.
If you have confirmed the above two notes it may be adventageous to open a TAC case as we may need to do some live additional troubleshooting.
Thanks
-Jay

Financial Reporting Studio 11.1.2.1 PDF not Configured for Web Server

I have installed EPM 11.1.2.1, and HFM, Planning, Essbase, Financial Reporting are all working fine except when I do a report preview in the Workspace an error is received that PDF has not been configured for this Web Server.
I have uninstalled PDF and Financial Reporting then re-installed them but I am still getting the same error. Also, I when I tried to view report from Workspace in Financial Reporting Studio, I received the following error:
error number 400 Error Description:Form already displayed; can't show modally. Function: ShowMsg. Module:GblMethods.
Your help would be gracefully appreciated.

You should review all installation guides, readmes, and the certification matrix before performing a Hyperion Installation and/or Upgrade.
Version 9.0 of Ghostscript is not supported, install ghostscript 8.6.3 - 32-bit.
From the 11.1.2.1 Certification Matrix: "Either: --Adobe Acrobat Distiller Server 8.0 or 6.0 --GPL Ghostscript 8.63; AFPL Ghostscript 8.54 or 8.51; or GNU Ghostscript 7.0.6"
From the 11.1.2.1 Installation Guide Page 110: "Ensure that a supported 32-bit version of Ghostscript is installed."
See http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-131801.xls
http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_11121.pdf
Regards,
John A. Booth
http://www.metavero.com

Want to use an iPod photo configurated for Mac on a PC

I want to use my old iPod photo (configurated for Mac) on a PC (but do not need to keep my songs and photos). Is this possible? If so, what do I do?
iMac G5 Mac OS X (10.4.8) iPod 5th generation 60 GB

If your iPod is formatted for Mac it won't run natively on a PC because the Windows OS does not support the HFS Plus file system and therefore will not see the drive. Macs can read Windows drives so you could restore and format the iPod on a PC, this would also mean any future software updates would have to be done on Windows. This will erase your drive so you need to have your songs and photos backed up. Alternatively there are third party programs that will allow you to use a Mac formatted iPod on Windows, this is one for instance gets good reviews and has the functionality to let you copy content from the iPod to the PC. Not sure if it does photos but have a look: XPlay 2
You can read another user's experience of using XPlay at this link: iPod on Mac and Windows

SAP IDES ECC 6.0 configuration for ess/mss

Hi,
Iam new to sap . i want to practice various scenarios in ess/mss in my own pc which is installed with ecc 6.0 . what are the configuration to be made in ecc 6.0 for maintaining about 10-20 users for using ess/mss scenarios. i have a knowledge on webdynpro java and little knowledge on ep and using r/3 server. The 10-20 users created should be able to use ess/mss through portal .
So, list the steps configuring for 10-20 users for using ess/mss in ecc ides 6.0 server.
Thanks & regard
prasad

<< Do not post the same question across a number of forums >>

Is it possible to run TWO parellel configurations for one Object??

SAP Gurus,
We have a strange requirement from the client to have to configurations established in the system for one configuration object.
Without taking much of your time let me paraphrase the requirements.
The client is having two different types of putaway strategies in their current business process. And they toggle between these putaway strategies by reaching out to their production support group and they make configuration changes to have the other put away strategy
One Step Putaway: GR area --> High Rack Storage
Two Step Putaway: GR area --> Interim storage (area at the end of each aisle of high rack storage) --> High Rack
Client wants to have two parallel configurations for both of these put away strategies and needs an ability to switch from one to another. This switching ability should be accessed from SAP screen without any IT intervention (no configuration)
- Switching ability should allow the warehouse manager to change from one step to two step put away strategies without any IT intervention.
- Switching ability should be accessed my SAP Screen (Z-transaction or something with a radio button to toggle around)
Is it possible to have two configuration made for Putaway Strategies and switch them on/off depending on the warehouse needs??
Your invaluable feedback on this will be highly appreciated.
Thanks again folks,
Dhaval
Edited by: Dhaval Joshi on Mar 4, 2008 12:09 PM

Q1--I don't believe it is possible. An organization can have multiple licenses tied to its main email address, for example, but then they are assigned to the individual users.
Q2--Yes, you would just need to log out of your account within the CC desktop app prior to logging in on the other account.
If you have any questions, feel free to reach out.

How can I list all the domains configured for Weblogic Servers?

How can I list all the domains configured for Weblogic Servers?
I saw a note, which says the following:
"WebLogic Server does not support multi-domain interaction using either the Administration Console, the weblogic.Admin utility, or WebLogic Ant tasks. This restriction does not, however, explicitly preclude a user written Java application from accessing multiple domains simultaneously."
In my case, I just want to list all the domains, is that possible by using any scripts?
Thanks
AJ

If you use WLS Node Manager and the Config Wizard was used to create the domains, then the list of domains should be in a location like this:
<MIDDLEWARE_HOME>\wlserver_10.3\common\nodemanager\nodemanager.domains
Enterprise Manager Grid Control also has support for multi-domain management of WLS in a console.

How to get the number of decimal places configured for a site column

Hi,
I have a column 'SampleNumCol' of type Number, the number of decimal places to be displayed is configured as 2.
The column conatins a value, but when retrieved programatically is displayed as 5.00000000 instead of 5.00.
I am retrieving this column using listitem.Properties[field.InternalName].
I need to trim the decimals based on number of decimal places configured for the site column.
How to get the number of decimal places configured for a site column?
Thanks in advance,
dhijit

Get the field as SPFieldNumber and then check DisplayFormat which returns
SPNumberFormatTypes
SPFieldNumber numberField = list.Fields.GetFieldByInternalName("YourNumberFieldName") as SPFieldNumber;
SPNumberFormatTypes numFormatType = numberField.DisplayFormat;

Getting SPWeb.CurrentUser as null with Windows Authentication (AD), when configured for Claims Authentication

Hi All,
We recently migrated to SP 2013 from SP 2010. We are using most of the OOB features, with a few custom code. We have implemented a custom ASP.NET Membership Provider that authenticates against a web service. This was working fine on SP 2010.
The entire code base was migrated to SP 2013 (with .net fw 4.5, etc) and any issues Compile / Runtime were fixed. However, we are stuck at one bug, which seems to be occuring only while trying to login with Windows Authentication. When a user tries to login
with Forms Authentication, the error is never noticed.
Scenrio: Login as Windows Authentiction.
Result: The user is signed into the system and is authenticated against the AD. For random page loads - it throws access denied (even though he is a site collection admin). While attaching a debugger, we found that, at times the SPWeb.CurrentUser is null (weird).
At the same time, the HttpContext.Current.Request.IsAuthenticated returns true. Which means the User is Authenticated, but not available in the SPWeb.CurrentUser object.
Attached are couple of ULS Logs that we found. The line which says IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 is a little disturbing. Can you please let me know what is happening here? I am not able to access the root site (http://win2012d2:1234/)
however, i am able to access (http://win2012d2:1234/SitePages/Home.aspx) just fine, without any issues.
Please note, this error is only when the user is logged into sharepoint as a windows user. The forms user faces no such issues.
ULS Logs:
Name=Request (GET:http://win2012d2:1234/)
Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0
Application error when access /, Error=Exception of type 'System.ArgumentException' was thrown. Parameter name: encodedValue
at Microsoft.SharePoint.Administration.Claims.SPClaimEncodingManager.DecodeClaimFromFormsSuffix(String encodedValue)
at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(IClaimsIdentity claimsIdentity, String encodedIdentityClaimSuffix)
at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix)
at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromLoginName(String loginName)
at Microsoft.SharePoint.ApplicationRuntime.SPHeaderManager.AddIsapiHeaders(HttpContext context, String encodedUrl, NameValueCollection headers)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PreRequestExecuteAppHandler(Object oSender, EventArgs ea)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Getting Error Message for Exception System.ArgumentException: Exception of type 'System.ArgumentException' was thrown. Parameter name: encodedValue
at Microsoft.SharePoint.Administration.Claims.SPClaimEncodingManager.DecodeClaimFromFormsSuffix(String encodedValue)
at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(IClaimsIdentity claimsIdentity, String encodedIdentityClaimSuffix)
at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix)
at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromLoginName(String loginName)
at Microsoft.SharePoint.ApplicationRuntime.SPHeaderManager.AddIsapiHeaders(HttpContext context, String encodedUrl, NameValueCollection headers)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PreRequestExecuteAppHandler(Object oSender, EventArgs ea)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
[Forced due to logging gap, Original Level: Verbose] Looking up {0} site {1} in the farm {2}
Unknown SPRequest error occurred. More information: 0x80070005
SPRequest.GetPageListId: UserPrincipalName=, AppPrincipalName= ,bstrUrl=http://win2012d2:1234/
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)), StackTrace:
at Microsoft.SharePoint.SPContext.get_ListId()
at Microsoft.SharePoint.SPContext.get_List()
at Microsoft.SharePoint.WebControls.ScriptLink.InitJs_Register(Page page)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterForControl(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, Boolean injectNoDefer, Boolean controlRegistration, Boolean loadInlineLast,
Boolean ignoreFileNotFound)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, String uiVersion, String ctag)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(String uiVersion, Control ctrl, Page page, String name, Boolean localizable, Boolean defer)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer)
at Microsoft.SharePoint.WebControls.ScriptLink.GetOnDemandScriptKey(String strKey, String strFile, Boolean registerDependencies, Control ctrl, Page page)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Control ctrl, Page page, String strKey, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Page page, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterForControl(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, Boolean injectNoDefer, Boolean controlRegistration, Boolean loadInlineLast,
Boolean ignoreFileNotFound)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, String uiVersion, String ctag)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Control ctrl, Page page, String strKey, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpServerUtility.ExecuteInternal(IHttpHandler handler, TextWriter writer, Boolean preserveForm, Boolean setPreviousPage, VirtualPath path, VirtualPath filePath, String physPath, Exception error, String queryStringOverride)
at System.Web.HttpServerUtility.Execute(String path, TextWriter writer, Boolean preserveForm)
at System.Web.HttpServerUtility.Transfer(String path)
at Microsoft.SharePoint.Utilities.SPUtility.TransferToErrorPage(String message, String linkText, String linkUrl)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.ErrorHandler(HttpApplication app, Boolean errorIsOnErrorPage)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.ErrorAppHandler(Object oSender, EventArgs ea)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.HttpApplication.RaiseOnError()
at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)
at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)
at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
SPRequest.OpenWeb: UserPrincipalName=, AppPrincipalName= ,bstrUrl=http://win2012d2:1234/
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)), StackTrace:
at Microsoft.SharePoint.SPWeb.InitWeb()
at Microsoft.SharePoint.SPWeb.get_WebTemplateConfiguration()
at Microsoft.SharePoint.WebControls.ScriptLink.InitJs_Register(Page page)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterForControl(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, Boolean injectNoDefer, Boolean controlRegistration, Boolean loadInlineLast,
Boolean ignoreFileNotFound)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, String uiVersion, String ctag)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(String uiVersion, Control ctrl, Page page, String name, Boolean localizable, Boolean defer)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer)
at Microsoft.SharePoint.WebControls.ScriptLink.GetOnDemandScriptKey(String strKey, String strFile, Boolean registerDependencies, Control ctrl, Page page)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Control ctrl, Page page, String strKey, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Page page, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterForControl(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, Boolean injectNoDefer, Boolean controlRegistration, Boolean loadInlineLast,
Boolean ignoreFileNotFound)
at Microsoft.SharePoint.WebControls.ScriptLink.Register(Control ctrl, Page page, String name, Boolean localizable, Boolean defer, Boolean loadAfterUI, String language, String uiVersion, String ctag)
at Microsoft.SharePoint.WebControls.ScriptLink.RegisterOnDemand(Control ctrl, Page page, String strKey, String strFile, Boolean localizable)
at Microsoft.SharePoint.WebControls.ScriptLink.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpServerUtility.ExecuteInternal(IHttpHandler handler, TextWriter writer, Boolean preserveForm, Boolean setPreviousPage, VirtualPath path, VirtualPath filePath, String physPath, Exception error, String queryStringOverride)
at System.Web.HttpServerUtility.Execute(String path, TextWriter writer, Boolean preserveForm)
at System.Web.HttpServerUtility.Transfer(String path)
at Microsoft.SharePoint.Utilities.SPUtility.TransferToErrorPage(String message, String linkText, String linkUrl)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.ErrorHandler(HttpApplication app, Boolean errorIsOnErrorPage)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.ErrorAppHandler(Object oSender, EventArgs ea)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.HttpApplication.RaiseOnError()
at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)
at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)
at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)

Hi Mohamed,
According to your description, my understanding is that the error occurred when users login with Windows Authentication.
From the error message, I recommend to check if the anonymous access is enabled for the web application.
And please also make sure that the users all are available and have permission to access the site.
Here is a similar thread for you to take a look:
http://social.technet.microsoft.com/Forums/en-US/28623bdc-a2f0-4876-9be4-9a764f106366/getting-spwebcurrentuser-as-null-with-windows-authentication-ad-when-configured-for-claims?forum=sharepointdevelopment
Best regards.
Thanks
Victoria Xia
TechNet Community Support

MM configurations for SAP AFS System

Hi,
        I'm working in MM configuration for SAP AFS production system, After uploading AFS Materials successfully and also created Purchase order to make a stock for that material, but PO created successfully but not able to do Goods receipts for created PO.
       Errors : Purchase order xxxxx has no items,
Once created sales order for the same material again we got the error while GR but error is different.
      GR is not possible for this PO number.
But material type is ROH , and its external procurement only.
Please let me know when we will get this type of errors.
Thanks and regards
Nisar.

Hi Nasir;
Some possible causes are;
1.     Defining inbound delivery (Or kind of a confirmation) in the PO LI level and not maintaining the document subsequently
2.     Not releasing the PO before the GRN
3.     Creating the PO with a material with Grids (AFS Basic Data Screen) and not maintaining the grid value at item detail level of the PO
Azwath Mohammad
http://www.sapafs.net

SCOM 2012 R2 Error The connector the module is configured for no longer exists

Hi All,
The Microsoft Operations Manager Connector Framework Alert Forwarding module failed to mark an alert for forwarding because the connector the module is configured for no longer exists.
Connector Id: 57a14deb-a74b-520e-ac32-ba8d340d112d

Hi Mark,
You can try the following steps,
This is because we have deleted a connector that still had a live subscription associated with it. We need to go and delete that subscription to clean this up. The problem is – the connector is gone, so the subscription is no longer available
in the UI.
Therefore – we will have to delete it manually. This subscription (as all subscriptions) is kept in the “Notifications Internal Library” MP. You need to export that MP to XML. FIRST MAKE A BACKUP COPY OF THIS FILE IN CASE YOU MESS UP, then
open it for editing in Notepad, or your XML editor of choice.
All subscriptions in this MP are kept in the <Monitoring> <Rules> section. To identify which connector subscription RULE is causing the problem – you can search for the connector ID, from the event 11502 above. In my example – my connector
ID from this event is: b7a64deb-f7ff-440e-bc30-d08d340dfe8d.
So – I search the XML for that string – and find b7a64deb-f7ff-440e-bc30-d08d340dfe8d in the <WriteActions> section of a specific <Rule>:
<WriteActions>
<WriteAction ID="WA" TypeID="SystemCenter!Microsoft.SystemCenter.ConnectorFrameworkAlertWriteAction">
<ConnectorId>{b7a64deb-f7ff-440e-bc30-d08d340dfe8d}</ConnectorId>
</WriteAction>
</WriteActions>
Good – I have identified the problem. Now – I need to do two things:
Find the rule ID – to identify the display string associated with it… then delete that display string.
Delete the orphaned subscription rule.
So – I move up in the XML section of this rule – and I find my Rule ID. (here is mine:)
<Rule ID="ProductConnectorSubscription2850f8e3_afe7_4c36_84d2_ee258bd086eb"
I then search for the part above which I bolded in blue (yours will be different – search for your string)
What this finds – is the display string section of the XML – which maps this GUID ID to the common name that you gave the subscription. (here is mine:)
<DisplayString ElementID="ProductConnectorSubscription2850f8e3_afe7_4c36_84d2_ee258bd086eb">
<Name>Process All New Alerts</Name>
</DisplayString>
So – I need to DELETE this section from the XML…. just the section above, from my very specific <DisplayString ElementID="ProductConnectorSubscription2850f8e3<GUID> line, to the very next </DisplayString>.
Next – I need to delete the entire <rule> which contains the subscription we want to remove. Mine will be from:
<Rule ID="ProductConnectorSubscription<GUID> line to the very next </Rule>
When you are happy – you can import this XML MP back into the management group. It should import with no errors. If you get an error – you made a mistake when editing the XML. You can look on the RMS event log for the specific problem – there
will be a critical event there if it fails to import.
second part for this link
http://blogs.technet.com/b/kevinholman/archive/2009/09/10/removing-an-old-product-connector.aspx
Regards, Ibrahim Hamdy

Collector Configuration for Sybase - history retention for DB growth

Similar Messages

Maybe you are looking for