Collision with obj imported file problem....help!

Hi .... excuse me for my english... i'm new....
I have created a imported file with OBJ Loader.
The geometry is modeled in Maya... is very complicated mesh.
The problem is:.... when i walk on... the camera walking through the imported object!!
Can I stop che camera when enter in collision with obj file??
Thanks!!

An applet is not allowed to write files.
But you can use a signed applet.

Similar Messages

Getting Started with FCE - Problems with my imported files

Hi,
I'm trying to get started with Final Cut Express, but I'm experiencing lots of problems when I import my project from iMovie.
My project contains video, which I imported into iMovie at 960 x 540. It also contains some keynote animations, which I exported from Keynote as quicktime files.
When I export my files to FCE, I instantly get problems.
1) When I add the imported file to the sequence, I get an "Attention the clip does not match the sequence's setting or any of your sequence settings" error.
2) Whether I choose to translate my settings or not, I try to play the video in the timeline, but there is a continuous beeping sound, no audio from my video and when it hits the keynote animations, it just says "unrendered" or "media offline".
Please can you offer any advice on how I can get started with FCE more successfully.
Thanks!

Hi(Bonjour)!
(please specify iMovie and FCE version)
Well, your sequence settings in FCE should be DV-PAL 48 Khz.
Create a new sequence.
From iMovie and Keynote, export your movie with quicktime conversion andd select DV-PAL 48 kHz (*And Not* DV Stream...). This material should play without rendering because his format and codec match the sequence's codec.
Import your files and everything should be OK.
Michel Boissonneault
The audio should be AIFF 48 kHz 16 bit linear PCM

Import File Failure, Help!

Hello, I am new to Adobe Premiere Pro CS4 and thought i would start by working my way through the Adobe "Classroom In a Book" CS4. I made a start through the early chapters then almost instantly hit a problem. What ever I tried to import e.g. Panasonic P2, Still images below 4000x4000, .avi. Basically all the material that was supplied on the Dvd that come with the book, I get the message "Import File Failure" "File Video Dimentions (Width/Height) Too Large".
I've tried restarting the computer but no luck, really gutted as I need to learn this program before next semester
I've also made sure my sequence sizes are the same size as my assets
I am running the Adobe Suite on a MacBook Pro 2.53GHz with Snow Leopard (10.6.4)
Hope anyone can help
Cheers

Try reading through the results of MY SEARCH to see if anything applies. You may just need to uninstall CS4 and then reinstall it.
-Jeff

FM8 to PDF - Imported Files Problem

When converting an FM8 file to a PDF, my imported files that have been pasted or linked in the FM8 document (primarily from Excel) show up as blacked-out boxes in the PDF. How can I fix this?

Thank you for the reply. Some background.
I have been using native .ai files for about 5 years with no difficulty and the current file with referenced ai file was created in FrameMaker 7.0 and Illustrator CS2. I have been revising a number of files and the problem appeared only at this time. I think there may be a problem with the Illustrator/PDF settings because I could create the graphic as a PDF but not an eps file. the resulting PDF when referenced in the FrameMaker file did not print either.
There were some font warnings when I updated the Illustrator CS2 file to CS3 format.
I had another file that I revised in FrameMaker but did not change the Illustrator file (CS2) and the resulting PDF printed the graphic fine.
I am trying to check my Acrobat settings and Illustrator settings.

Problem related to OSS Note - importing file problem

Hi,
I m facing an issue while implenting an oss note 430580 , i have to import files from sapserver.
but i don't know how to do it.
below is the description of my problem.
Import the following files from SAPSERV:
/general/R3server/abap/note.0430580/K000687.PLM
/general/R3server/abap/note.0430580/R000687.PLM
Import the two files into your system.
For more information on SAPSERV, see Note 13719.
Can any one tell me how can i get rid out of this prioblem.
whether this is possible or BASIS Team can only do this.
system details
Operating system SunOS
Machine type sun4u
R/3 release 4.6C

Well, these files are part of the zip.file which belong to the note. This is part of a regular transport and is normally done be basis. The data and the cofile (K....PLM & R...PLM) should be imported into your system. Before doing so they have to be transferred to the file server. Better let BASIS do these kind of things.

Import file - problem

Hello!
When i import the any file ( video, music or picture) AE CS5 sending me message:
after effects warning: Error with file "any file"
any ideas? thanks!

Yes! i restarted my computer and it is exact wording of the error message.
I have windows 7.
And some new details:
1) If i import file from program menu:
AE->File->Import->"any file"->after effects warning: Error with file "any file"
2) If i drag file from any location to AE:
After Effects error: could not convert Unicode characters.
Attach SCR:

Need your Help with Swapping SWF File Problem

Hello,
I have two separate Flash SWF files which I would like upload
into the same HTML file. But I would like to load only one of them
at the time and would like to have a Button on each SWF Flash file
which causes the other SWF to be loaded.
hmmm.. I am not sure if I managed to make sense. :o) Let me
try it one more time. :o) I would like to swap one SWF file for
another SWF file by clicking on the buttons which are placed on the
SWF files! :o)
I was wondering if that is possible or I should think of
another way to get around this problem of mine.
Thank you very much for your help and have a great day.
Cheers,
Babak

Khoramdin wrote:
> Hello,
>
> I have two separate Flash SWF files which I would like
upload into the same
> HTML file. But I would like to load only one of them at
the time and would
> like to have a Button on each SWF Flash file which
causes the other SWF to be
> loaded.
>
> hmmm.. I am not sure if I managed to make sense. :o) Let
me try it one more
> time. :o) I would like to swap one SWF file for another
SWF file by clicking
> on the buttons which are placed on the SWF files! :o)
make one swf as a holder. call it main.fla main.swf file.
Embed that file in your html document. In that file place
button with the
following action :
on (release) {
loadMovieNum("second.swf", 1);
in that file have a button with action to load the 3rd file :
on (release) {
loadMovieNum("3rd.swf", 1);
by loading them in same level (1) they will replace each
other.
Pretty simple..uh ?
Regards
Urami
Happy New Year guys - all the best there is in the 2006 :)
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free>

Can you help with my wav file problems?

I have just loaded some drum and guitar tracks a friend recorded for me on protools so I can work on them on garage band. All the tracks are there but they are too slow! It sounds like a slowed down tape. the guitar sounds too low! What happened?

Flash Player is a browser plugin, not an executable program, and is therefore not installed under Program Files.
If you have Shockwave Flash enabled, that means it is installed. Perhaps you have ActiveX Filtering on? See http://forums.adobe.com/thread/867968

Huge Flash File Problem HELP!

Hi,
I am making a flash animation with imports from illustrator,
using copy and paste mainly, the resolution of the animation is
1280 x 1024. The fla file has crawled to 110MB and is seriously
killing my computer when i trya nd work on it. It takes 25 minutes
to save! I need the final animation to run full screen a t that
resolution. Should I be making it at that resolution
is this the problem?
please help
thanks
apples

AI artwork can often be flattened in flash by selecting all
and using Ctrl + B (break apart) until
it's all 1 layer of vector data as opposed to several grouped
objects.
--> Adobe Certified Expert *ACE*
--> www.mudbubble.com
--> www.keyframer.com
feedmeapples wrote:
> Hi,
>
> I am making a flash animation with imports from
illustrator, using copy and
> paste mainly, the resolution of the animation is 1280 x
1024. The fla file has
> crawled to 110MB and is seriously killing my computer
when i trya nd work on
> it. It takes 25 minutes to save! I need the final
animation to run full screen
> a t that resolution. Should I be making it at that
resolution
>
> is this the problem?
>
> please help
>
> thanks
>
> apples
>
>
>

Help -- writing file problem -- Help

hi i have an applet, and i am trying to get it to write to a file but get a file permission exception:
i tried to set the permission with the help of the API but it didnt help.
Help pls
here is code to write to the file
import java.awt.*;
import java.awt.event.*;
import java.applet.*;
import javax.swing.*;
import java.io.*;
import java.util.*;
public class Add extends Applet1 implements Serializable {
     public Add(JTextArea jTextArea2){
          String newline = System.getProperty("line.separator");
          String NULL = "";
          BufferedWriter outStream;
          StringBuffer buf;
     try {
          // Set the File Permission
          FilePermission fperm = new FilePermission("*" , "write");
          String inputValue1 = JOptionPane.showInputDialog("Please enter the English Translation");
                 //if(!inputValue1.equals(NULL)) {
                    String inputValue2 = JOptionPane.showInputDialog("Please enter the French Translation");
          String in = (inputValue1 + ":" + inputValue2 + ":" + newline);
          jTextArea2.append(inputValue1 + ":" + inputValue2 + ":" + newline);
          System.out.println(inputValue1 + ":" + inputValue2 + ":" + newline);
          JOptionPane.showMessageDialog(null, in, "alert", JOptionPane.INFORMATION_MESSAGE);
          jTextArea2.append(newline + "getAcrion: " + fperm.getActions() + newline);
          jTextArea2.append(newline + "implies: " + fperm.implies(fperm) + newline);
          String si = in.toString();
          byte[] buff = si.getBytes();
          FileOutputStream out= new FileOutputStream("userDefined.txt", true);
          int j=si.length();
            out.write(buff, 0, j);
          jTextArea2.append(newline + "getAcrion: " + fperm.getActions() + newline);
          jTextArea2.append(newline + "implies: " + fperm.implies(fperm) + newline);
     catch (IOException ev)
          jTextArea2.append("Receivedl Exception: " + ev + newline);
          System.out.println("Receivedl Exception: " + ev + newline);
     catch (java.security.AccessControlException ev)
          jTextArea2.append("Receivedl Exception: " + ev + newline + ev.getMessage());
          System.out.println("Receivedl Exception: " + ev + newline + ev.getMessage());
}here is how i access it from the main applet
public void jButton2_mousePressed(MouseEvent e) {
   Add add1 = new Add(jTextArea2);
}any help welcomed

An applet is not allowed to write files.
But you can use a signed applet.

DW CS3 conflict with server & uploading files (please help?!?!)

I work with one other person and although we work on files locally, when one of us tries to push a file up to the remote server we get an error that reads:
"name of person" is currently working on that file (Please enable Check In/Out in the Site Definiteion dialog box to avoid overwirting changes made by otehr users.) Do you want to upload the file anyway?
Neither one of us has enabled Check in Check out feature either. My question is that I know this person isn't even in Dreamweaver or connected to the server. Two strange things:
1) Dreamweaver gives the actual person who is trying to upload the error saying that they are currently working on the file.
2) Dreamweaver actually gives me that error message but it's telling me that someone who left the office over two years ago and who I know no longer has an account on the server. How can she currently be working on a file or even linked to that file name???
We thought this glitch would go away when we got new PCs and loaded CS3 but it hasn't. Does anyone have any suggestions to help me figure out why we keep getting these issues.
THANKS!!!

That's a server side issue. Either its timeouts are set way too liberally (to the server, your FTP connections never seem to end) or it creates a new session for every time you log on. Both are fundamentally wrong and from your description I get the impression that the machine is also otherwise not being maintained properly. Time to fly in the admin, I'd say.
Mylenium

JAXP working with XML-XSL files - urgent help

I have the code below to transform xml file into html file using xsl file:
Transformer transformer = tFactory.newTransformer(new StreamSource("D:/Test/26120108026263560502.xsl"));
transformer.transform(new StreamSource("D:/Test/26120108028469387014574415483532664948806162003.xml"), new StreamResult(new FileOutputStream("D:/Test/Test.html")));
The code works fine with simple xml, xsl files, but it shows strange error messages when transforming more complex xsl file, please look at the errors below:
[Error] 26120108026263560502.xsl:3:80: Element type "xsl:stylesheet" must be declared.
[Error] 26120108026263560502.xsl:4:58: Element type "xsl:output" must be declared.
[Error] 26120108026263560502.xsl:6:75: Element type "xsl:include" must be declared.
[Error] 26120108026263560502.xsl:12:25: Element type "xsl:template" must be declared.
[Error] 26120108026263560502.xsl:14:7: Element type "html" must be declared.
[Error] 26120108026263560502.xsl:15:7: Element type "head" must be declared.
[Error] 26120108026263560502.xsl:16:8: Element type "title" must be declared.
[Error] 26120108026263560502.xsl:17:75: Element type "xsl:value-of" must be declared.
[Error] 26120108026263560502.xsl:19:74: Element type "meta" must be declared.
[Error] 26120108026263560502.xsl:20:8: Element type "style" must be declared.
[Error] 26120108026263560502.xsl:38:25: Element type "body" must be declared.
[Error] 26120108026263560502.xsl:39:48: Element type "xsl:call-template" must be declared.
[Error] 26120108026263560502.xsl:40:55: Element type "xsl:call-template" must be declared.
[Error] 26120108026263560502.xsl:41:49: Element type "xsl:call-template" must be declared.
[Error] 26120108026263560502.xsl:43:67: Element type "table" must be declared.
[Error] 26120108026263560502.xsl:44:7: Element type "tr" must be declared.
[Error] 26120108026263560502.xsl:45:21: Element type "td" must be declared.
[Error] 26120108026263560502.xsl:45:24: Element type "b" must be declared.
[Error] 26120108026263560502.xsl:45:51: Element type "br" must be declared.
[Error] 26120108026263560502.xsl:46:123: Element type "xsl:value-of" must be declared.
It look to me that JAXP can't recognize the tags. Everyone's help is appreciated.
Neil

Here is the top part of it: ***********************
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE xsl:stylesheet [<!ENTITY nbsp " ">]>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="html" indent="no" encoding="UTF-8" />
<xsl:include href="http://connexion.vdr.com/ematrix/reports/xsllib.xsl" />
<xsl:template match="/">
<html>
<head>
<title>
<xsl:value-of select="//businessObject[objectType='CRA']/objectName"/>
</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<style>
TABLE
font-family: Arial Narrow, Tahoma, Verdana;
border: #000000 solid;
border-width: 2px 2px 0px;}
TABLE.BOTTOM
font-family: Arial Narrow, Tahoma, Verdana;
border: #000000 solid;
border-width: 2px 2px 2px;}
TD.DATA, TH.DATA
border: #cccccc solid;
border-width: 0px 1px 1px 0px;}
</style>
</head>
<body bgcolor="#FFFFFF">
<xsl:call-template name="ECRHeaderTable" />
<xsl:call-template name="ECRHeaderDetailsTable" />
<xsl:call-template name="ECRDetailsTable" />
Anh here is the top part of file xsllib.xsl in the xsl:include: ********
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE xsl:stylesheet [<!ENTITY nbsp " ">]>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">

<xsl:template name="CalJulian">
<xsl:param name="Year"/>
<xsl:param name="Month" select="1"/>
<xsl:param name="Day" select="1"/>
<xsl:param name="Hour" select="0"/>
<xsl:param name="Min" select="0"/>
<xsl:param name="Sec" select="0"/>
<xsl:variable name="jy">
<xsl:choose>
<xsl:when test="($Year < 0) and ($Month > 2)">
<xsl:value-of select="$Year + 1"/>
</xsl:when>
<xsl:when test="($Year >= 0) and ($Month <= 2)">
<xsl:value-of select="$Year - 1"/>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$Year"/>
</xsl:otherwise>
</xsl:choose>
</xsl:variable>
The files work fine when I use msxsl.exe without any errors. I forgot to mention that dispite all the errors, JAXP still creates the html file but seeing the errors is not a good thing.
Neil

Linked excel file problem - Help needed

I have 2 excel files in the same directory in Content Services. The "destination" file has a link in one of its cells to a cell in the "source" file. I want to be able to open the "destination" file and update the data if any changes have been made to the "source" file.
My problem is when I try to do this i get an error that says "This workbook contains one or more links that cannot be updated" and two options.
1) To change the source of links, or attempt to update values again, click Edit Links.
2) To open the workbook as is, click Continue.
If I click Edit Links I am then presented with a screen where I can open the "source" file. When I try to do this though I am given a login screen. Supplying a valid Content Services username and password doesn't work and I cannot open the file.
Can anyone tell me how I can open the "destination" file without having to open every "source" file? I don't want to open the "source" files because there could be dozens of "source" files for one "destination" file.

setw is the equivalent of the field width value in printf. In your code, the printf version would look like:
printf("%8s", CURSOR->name.c_str());
I much prefer printf over any I/O formatting in C++. See the printf man page for more information. I recommend using Bwana: http://www.bruji.com/bwana/
I do think it is a good idea to verify your code on the platform it will be tested against. That means Visual Studio. However, you don't want to use Visual Studio. As you have found out, it gets people into too many bad habits. Linux is much the same way. Both development platforms are designed to build anything, whether or not it is syntactically correct. Both GNU and Microsoft have a long history of changing the language standards just to suit themselves.
I don't know what level you are in the class, but I have a few tips for you. I'll phrase them so that they answers are a good exercise for the student
* Look into const-correctness.
* You don't need to compare a bool to 1. You can just use bool. Plus, any integer or pointer type has an implicit cast to bool.
* Don't reuse your CURSOR pointer as a temporary index. Create a new pointer inside the for loop.
* In C++, a struct is the same thing as a class, with all of its members public by default. You can create constructors and member functions in a struct.
* Optimize your function arguments. Pass by const reference instead of by copy. You will need to use pass by copy at a later date, but don't worry about that now.
* Look into initializer lists.
* In C++ NULL and 0 are always the same.
* Return the result of an expression instead of true or false. Technically this isn't officially Return Value Optimization, but it is a good habit.
Of course, get it running first, then make it fancy.

Import settings problem HELP!!!!

I am currently switching my itunes from my desktop to my laptop by burning multiple CDs. Just resently I updated itunes to 7.5 on my laptop and ever since, when im tring to import the burned CDs, itunes gives me a massage saying:
"The current encoder settings for bit rate and sample rate are not valid for this file"
The itunes on my desktop is also version 7.5 and the settings are the same for importing and burning as my laptop. I only have 3 more CDs to import and i'm done, so some advise for fixing this import prblem would be much appreciated.
Message was edited by: YZFBrad

Hi, I can't recall now how I moved the test websites, but I checked the Site Definition path and it was correct (for the new location) but the links were broken somehow. I never got to the bottom of it and gave up in the end and moved them back to my desktop
Can you 'talk me through' exactly what you feel I need to do to resolve the problem I have?
The website folder was called Test_01 and was located on my desktop. This folder housed all my html, css etc files. I exported the site definition using Site/Manage Sites in DW. I then copied the desktop including the folder Test_01 etc onto an external HDD.
After I re-installed all my software etc., I imported theTest_01 site definition via DW so my first line in the Files panel is currently:
+ (Folder icon) Site - Test_01 (C: Users/ etc etc to my desktop)
I then copied the whole folder Test_01 from my external HDD and placed it within the above so the complete view I currently have is:
+ (Folder icon) Site - Test_01 (C: Users/ etc etc to my desktop)
    - (Folder icon) Test_01
        + (Folder Icon) css
        + (Folder Icon) html
        etc etc
    diskdata.lnk
    SIW.lnk
I understand why I have the *.lnk files from my desktop showing. If I delete them, they are deleted them from the desktop itself. Surely DW shouldn't be showing the rest of my desktop as part of the Test_01 website?
Also, should I copy the files out of Test_01 rather than the whole folder so that I don't get Test_01 at the top level AND the second level?

What do I do if imported AAC files wont copy onto my iPhone? It has worked in the past with other imported files of the same type.

I have tried multiple times to sync a bunch of RHCP songs that i imported, but they wont copy onto my iPhone. I have tried isolating them in a playlist and syncing just that playlist and still nothing. please help. I have done this with other songs before and it worked fine but for some reason these ones wont copy.

I suggest taking it back to Best Buy. Once it has been opened, Apple will not handle the phone. Best Buy or another 3rd party are your only choices. Best Buy probably made an error when replacing the screen. Understand they are not an authorized Apple Service Center.

Collision with obj imported file problem....help!

Similar Messages

Maybe you are looking for