Collor is different after printing

Hello,
I created a logo where I use the color "Pantone Process DS Cyan C".
On the screen it seems Cyan. When I print it it seems more blue than Cyan.
I then printed a test page to check in ink levels: Magenta, Cyan, Yellow and Black.
In the test page Cyan is really Cyan. The difference is quite easy to see.
What should I do? Am I using the wrong pantone?
I though using Pantone Process would be a good option.
Thank You,
Miguel

As far a I know and can see yu are correct in the first place there is no reason that using Pantone Porcess Cyan should not print as expected.
It is simply the same as any generic process cyan ink.
This is what might occur though if you proof to plain paper the ink is absorbed by the paper and there really is no way to make it match it will look blue, because there is no profile for that paper.
No one really expects accurate color on plain paper as there are so many versions of plain paper it is not practical to profile so plain paper is for draft.
If you want to see Cyan the use a paper design for quality or presentation prints designed for your printer and select the correct profile for that paper when printing.
Otherwise color management or not you can pretty much expect the unexpected.
Remember quality paper made for or compatible with your printer and the right profile.
You copy the profile to the proper color sync folder and then under color management in the print dialog you select that profile.
If is a paper made specificaaly for your printers manufacturer's printers then they are probably loaded when you installed the drivers for your printer.

Similar Messages

  • My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

    I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
    My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
    Could there may be a setting somewhere that I need to adjust please?  I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
    <Edited by Host>

    Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

  • Windows 8 and IE 10 crashed after printing from Report Manager SQL server 2008 / 2008 R2

    We have a problem with Windows 8 in combination with IE 10 and printing reports.
    When we print a report from the Report Manager 'http://<servername>/reports' the browser crashed after a print.
    Sometimes before printing and somthimes after printing or when you close the browser.
    Al other operating systems like XP, Vista, Windows 7 with different IE versions have no problem.
    I tried the report manager from SQL Server 2008 and SQL Server 2008 R2.
    The same error occured when printing from our Internet application and the reportviewer.
    (ASP application written in Visual Studio 2010 and reportviewer version 10.)
    The event log shows two different messages.
    Faulting application name: IEXPLORE.EXE, version: 10.0.9200.16453, time stamp: 0x509b0dfb
    Faulting module name: ntdll.dll, version: 6.2.9200.16420, time stamp: 0x505aaa82
    Exception code: 0xc0000005
    Fault offset: 0x00061252
    Faulting process id: 0x780
    Faulting application start time: 0x01ce03a294f7d1d5
    Faulting application path: C:\Program Files (x86)\Internet Explorer\IEXPLORE.EXE
    Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
    Report Id: d4a72486-6f96-11e2-be6e-10604b6a74ed
    Faulting package full name:
    Faulting package-relative application ID:
    Faulting application name: IEXPLORE.EXE, version: 10.0.9200.16384, time stamp: 0x50107ee0
    Faulting module name: rsclientprint.dll, version: 2009.100.1600.1, time stamp: 0x4bb67a74
    Exception code: 0xc0000005
    Fault offset: 0x00017e7a
    Faulting process id: 0x9c8
    Faulting application start time: 0x01ce02f35c70ab85
    Faulting application path: C:\Program Files (x86)\Internet Explorer\IEXPLORE.EXE
    Faulting module path: C:\Windows\Downloaded Program Files\rsclientprint.dll
    Report Id: a13fccc6-6ee6-11e2-be67-10604b6a74ed
    Faulting package full name:
    Faulting package-relative application ID:
    Is there a fix for this problem?

    Dear Mike Yin,
    Thank you for your response. Your answer was the
    reason for finding the real problem.
    In december 2010 a SQL Server 2008 fix was the cause. I don't remember exactly the problem, but we changed the RSCLIENTPrint-x86.cab file. But instead to use the version of SQL Server 2008 we used the version of SQL Server 2008
    R2 (10.50.1600.1). This worked until
    Windows 8 (Internet Explorer crashed when printing).
    We fixed this problem by using the RSClientPrint-x86.cab file from SQL server 2008 (10.0.5500.0).
    But we now get the known problem that the
    activeX always must be installed again. 
    The reason for this is that the version of
    the SQL Server (10.0.5512.0) 
    and the rsclientprint.dll (10.0.5500.0) is different. SQL Server is newer (caused
    by a security patch (KB2716436)).
    Do you know when this problem will be resolved
    by Microsoft?
    Work arrounds
    I've also tried to install the RSClientprint.dll
    every time automatically (without user interaction).
    But this will be delayed the printing for more
    than 4 seconds. This
    is very annoying.
    Another workaround is to generate a PDF and print the PDF. But this is also
    a lot slower.
    Uninstall the security patch. but I don't know the security risk.

  • Print behaviour different from 'Print Preview' in PM Order

    Hi gurus,
    We have a requirement to check a user status at the Operation level before a print can be triggered from a PM Order in IW32. After changing the code to satisfy the requirement at the print program level, we are able to prevent the print if the user status is not set, when the user clicks the Print Preview button. However, if the user clicks the Print button, the header system status is being set to PRT, though the print program prevents the print from being output. After debugging, we found that the behaviour of the standard SAP ABAP code is different for Print compared to Print Preview.
    Looking at the userexits "IWO1*", we weren't able to identify a suitable one that allows one to make this check before a print is triggered.
    Have anyone come across this / a similar problem ? Is there a solution ? Any ideas ??
    Cheers,
    Ashok.

    Hi Narasimhan,
    Yes, your guess is correct. We have tried out the possibility of controlling the print from the user status configuration side of things, but as the user status is at an Operation level, the system status at the header level still gets set, confusing the user that a print was created.
    Any other ideas / alternates ?
    Cheers,
    Ashok.

  • Using Photoshop CS6 and after printing approx. 10 cards on an Epson R3000 printer the program gives me a dialog box saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened an

    Using Photoshop CS6 and after printing approx. 10 cards on an Epson R3000 printer the program gives me a dialog box saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."  Even after closing and reopening the program, the print command is greyed out so I cannot select any printer. This also happens with a Brother laser printer. Both printers will produce a test page out side of the Adobe product. Help!

    I cannot get any help either.  I get the message "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."  I have reinstalled all drivers, powered off/on all printers (2 of them - a Brother HL - 4040cn and an Epson Stylus Pro 7890 - which all worked fine until this morning).  There appears to be no path to a solution.  I have read all the forums and tried about 20 different suggestions all to no avail.  Reboots, changing cables, reinstalling printers and drivers and Photoshop CS6 - ALL TO NO AVAIL.  On a macbook pro retina with 10.10.3.  This issue is out there and some get solutions - but not all - that's my crowd...the not all crowd.  I have yet to be able to print from CS6 any more.  This is a show stopper and my patience is wearing thin.  And I'm tired of stupid questions like "is your printer powered on?" give me a break.  This appears to be an adobe photoshop cs6 problem - as I can print from every other application.  Anyone have any ideas?  Adobe should have something?... Adobe system  info below:
    Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
    Operating System: Mac OS 10.10.3
    System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 2300 MHz
    Built-in memory: 8192 MB
    Free memory: 4665 MB
    Memory available to Photoshop: 7059 MB
    Memory used by Photoshop: 70 %
    Image tile size: 1024K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
    OpenCL Version:
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
    Display: 2
    Display Depth:= 32
    Display Bounds:=  top: 1072, left: 140, bottom: 1950, right: 1580
    Video Renderer ID: 16918311
    Video Card Memory: 1024 MB
    Video Rect Texture Size: 16384
    OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
    OpenCL Version: 1.2 (Feb 27 2015 01:29:10)
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
    Display: 1
    Main Display
    Display Depth:= 32
    Display Bounds:=  top: 0, left: 0, bottom: 1050, right: 1680
    Video Renderer ID: 16918311
    Video Card Memory: 1024 MB
    Video Rect Texture Size: 16384
    Serial number: 92629107631240972642
    Application folder: KerrysHD:Applications:Adobe Photoshop CS6:
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      KerrysHD, 232.6G, 19.7G free
    Required Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
    Primary Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Plug-ins:
    Additional Plug-ins folder: not set
    Installed components:
       adbeape.framework   adbeape   3.3.8.19346   66.1025012
       AdbeScriptUIFlex.framework   AdbeScriptUIFlex   6.2.29.18602   66.490082
       adobe_caps.framework   adobe_caps   6.0.29.0   1.276181
       AdobeACE.framework   AdobeACE   2.19.18.19243   66.492997
       AdobeAGM.framework   AdobeAGM   4.26.17.19243   66.492997
       AdobeAXE8SharedExpat.framework   AdobeAXE8SharedExpat   3.7.101.18636   66.26830
       AdobeAXEDOMCore.framework   AdobeAXEDOMCore   3.7.101.18636   66.26830
       AdobeBIB.framework   AdobeBIB   1.2.02.19243   66.492997
       AdobeBIBUtils.framework   AdobeBIBUtils   1.1.01   66.492997
       AdobeCoolType.framework   AdobeCoolType   5.10.31.19243   66.492997
       AdobeCrashReporter.framework.framework   AdobeCrashReporter   6.0.20120201  
       AdobeExtendScript.framework   AdobeExtendScript   4.2.12.18602   66.490082
       AdobeJP2K.framework   AdobeJP2K   2.0.0.18562   66.236923
       AdobeLinguistic.framework      17206  
       AdobeMPS.framework   AdobeMPS   5.8.0.19463   66.495174
       AdobeOwl.framework   AdobeOwl   4.0.93   66.496052
       AdobePDFL.framework   AdobePDFL   10.0.1.18562   66.419471
       AdobePDFSettings.framework   AdobePDFSettings   1.4  
       AdobePIP.framework   AdobePIP   6.0.0.1654  
       AdobeScCore.framework   AdobeScCore   4.2.12.18602   66.490082
       AdobeUpdater.framework   AdobeUpdater   6.0.0.1452   "52.338651"
       AdobeXMP.framework   AdobeXMPCore   66.145661   66.145661
       AdobeXMPFiles.framework   AdobeXMPFiles   66.145661   66.145661
       AdobeXMPScript.framework   AdobeXMPScript   66.145661   66.145661
       ahclient.framework   ahclient   1.7.0.56  
       aif_core.framework   AdobeAIF   3.0.00   62.490293
       aif_ocl.framework   AdobeAIF   3.0.00   62.490293
       aif_ogl.framework   AdobeAIF   3.0.00   62.490293
       AlignmentLib.framework   xcode   1.0.0.1  
       amtlib.framework   amtlib   6.0.0.75  
       boost_date_time.framework   boost_date_time   6.0.0.0  
       boost_signals.framework   boost_signals   6.0.0.0  
       boost_system.framework   boost_system   6.0.0.0  
       boost_threads.framework   boost_threads   6.0.0.0  
       Cg.framework   NVIDIA Cg     
       CIT.framework   CIT   2.0.5.19287   145486
       data_flow.framework   AdobeAIF   3.0.00   62.490293
       dvaaudiodevice.framework   dvaaudiodevice   6.0.0.0  
       dvacore.framework   dvacore   6.0.0.0  
       dvamarshal.framework   dvamarshal   6.0.0.0  
       dvamediatypes.framework   dvamediatypes   6.0.0.0  
       dvaplayer.framework   dvaplayer   6.0.0.0  
       dvatransport.framework   dvatransport   6.0.0.0  
       dvaunittesting.framework   dvaunittesting   6.0.0.0  
       dynamiclink.framework   dynamiclink   6.0.0.0  
       FileInfo.framework   FileInfo   66.145433   66.145433
       filter_graph.framework   AdobeAIF   3.0.00   62.490293
       hydra_filters.framework   AdobeAIF   3.0.00   62.490293
       ICUConverter.framework   ICUConverter   3.61   "gtlib_3.0" "." "16615"
       ICUData.framework   ICUData   3.61   "gtlib_3.0" "." "16615"
       image_compiler.framework   AdobeAIF   3.0.00   62.490293
       image_flow.framework   AdobeAIF   3.0.00   62.490293
       image_runtime.framework   AdobeAIF   3.0.00   62.490293
       LogSession.framework   LogSession   2.1.2.1652  
       mediacoreif.framework   mediacoreif   6.0.0.0  
       PlugPlug.framework   PlugPlug   3.0.0.383  
       UpdaterNotifications.framework   UpdaterNotifications   6.0.0.24   "6.0.0.24"
       wrservices.framework        
    Optional and third party plug-ins: NONE
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE

  • Paper won't release after printing

    I don't know if it happened after a techie at HP suggested a different driver to access the e-print functions on my HP Envy printer, but some times the paper won't be released after printing.  I have to give it another function, then cancel the function, to get the printout.

    Hi
    I see.
    Have you by chance set the Docked icon to Keep In Dock, found by clicking and holding down on the docked icon?
    Furthermore you say the printer icon stays open showing a green arrow, so is that both the printer utility and the printer both showing in the dock?
    i think normally, there should only be the printer utility, a green open printer symbol doesn't ring a bell, so to speak.
    roam

  • Just wondering if I'm looking for something that doesn't exist - can firefox automatically close the "print-preview" window after printing?

    I'm using the addon in my firefox toolbar to print preview website data then append to a pdf file. Sometimes I am distracted, then can't remember if I've gone through the process and printed/appended the page to the file. It would be helpful if there was a way that the print preview window would close after printing thereby confirming that the process has completed. Thanks in advance.

    Thanks for your reply.
    I'm running different versions of firefox on different computers. I'm aware of the upgrade procedures. Same issue in later versions as well.
    The add-on is called "Print Preview Button 0.5" by sindre-wimberger which I obtained through the "Search Mozilla Support"
    However, that's not really relevant - to bring this back to basics the same situation occurs if you do <File> <Print Preview> then print the document. The print preview screen remains until manually closed. Perhaps there is a setting in "about:config"? Does anyone know if this is so? There is an entry "print.whileinprintpreview" but not sure what setting does here. Suspect if set to "False" then you probably wouldn't be able to print from "Print Preview" screen.
    Thanks.

  • The paper after printing comes distorted and rolled with 2 sides

    Hello! I've bought the HP LaserJet M1132 MFP All-In-One, and i've found that after printing (the quality is great) the paper comes rolled with both sides (left and right). The roll goes behind the printed side. When you put this paper on the table it's not straight, but like a hill.
    How I can fix it? Only at service?
    Paper is simple, A4 white, 80g/m2 office paper for laser printers.
    1. HP LaserJet M1132 MFP. 
    Product number: CE847A
    2. Snow Leopard 10.6.8
    3. No errors
    4. no changes
    Thank you!

    Dear Vitaly,
    You may have same output with different functions (Print/Copy)
    Make sure you output tray is empty and output tray is totaly open.
    It seems there’s no problem with the printer, Please make sure you paper is perfectly dry and the humidity is normal with in the environment. It could be the papers laying for long time in you printer’s input tray and got effected by moisture.
    Try with fresh papers from new packet.
    Goodluck!
    Tech.Pro

  • System Slow-Down After Printing

    I recently installed Mountain Lion. Over the last couple of weeks I have noticed a significant operating system (10.8.2) slow down after printing with my Epson R3000 printer. This happens after every printing session. When I say slow-down I mean significant delays and dreading "beachballs" when opening applications, selecting menu items or anything else I should choose to do. I'm left with re-starting the computer to get going normally again.After re-atarting I have gone to "verify permissions" and I get approx "5" pages of permission errors, all associated with the printer library in some fashion or another. I then repair all those permissions and re-start my MacPro. The operating system then works as normal and I can use the computer with no problems (until I start printing again). I mainly use the computer for photo editing with Adobe Photoshop CS6, Adobe Lightroom 4 and Aperture 3.2.
    I did not have this problem before upgrading to Mountain Lion (and then to 10.8.2). I did not get "significant" permission errors before upgrading. Since all printer drivers for this printer are handled now by Apple via the "new" Software Update process I can't even re-download the Epson printer driver and start over. I'm completely at a loss as to what, associated with the printer function, is causing these "significant" permission errors and subsequent operating system slow down. My printer is almost brand new and was working flawlessly before Mountain Lion. Let me be clear though, I can print fine. My problem is the system slow down after using the print function which I am only guessing has something to do with the "5" pages of permission errors after printting photos (with CS6/Lightroom/Aperture).
    Incidently, I am not in any way a computer expert. Verifying and repairing permissions is about all I know how to do that's why I need help. I also just thought I would try the forums first before going to technical support to see what people thought about this.
    Again, I repair the permission errors, re-start my system and all is fine. Any further suggestions would be deeply appreciated.

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • PowerPoint using macro to delete text boxes after printing

    Hi,
    We created custom shows in Powerpoint and are running a macro to insert temporary page numbers on the slides before printing.  The issue is that I need to remove the page numbers after printing.  I'm a novice at VBA so I'm sure there is an easy
    solution, but nothing I've tried so far has been successful.  The code is displayed below for your reference.  Any help is greatly appreciated. Thanks!
    Sub PrintCustomShow()
          ' Change this number to specify your starting slide number.
          Const lStartNum As Long = 1
          ' Ask the user which custom show they want to print.
          Dim strShowToPrint As String, strPrompt As String
          Dim strTitle As String, strDefault As String
          ' See if any custom shows are defined.
          If ActivePresentation.SlideShowSettings.NamedSlideShows.Count _
             < 1 Then
             ' No custom shows are defined.
             ' Set up the string for the message box.
             strPrompt = "You have no custom shows defined!"
             ' Display the message box and stop the macro.
             MsgBox strPrompt, vbCritical
             End
          End If
          ' Find the page number placeholder; if found, pick up the style.
          Dim rect As PageBoxSize
          Dim oPlaceHolder As Shape
          Dim bFound As Boolean: bFound = False
          For Each oPlaceHolder In _
             ActivePresentation.SlideMaster.Shapes.Placeholders
             ' Look for the slide number placeholder.
             If oPlaceHolder.PlaceholderFormat.Type = _
                ppPlaceholderSlideNumber Then
                ' Get the position of the page number placeholder.
                rect.l = oPlaceHolder.Left
                rect.t = oPlaceHolder.Top
                rect.w = oPlaceHolder.Width
                rect.h = oPlaceHolder.Height
                ' Get the formatting of the slide number placeholder.
                oPlaceHolder.PickUp
                ' Found the slide number placeholder, so set the
                ' bFound boolean to True.
                bFound = True
                Exit For
             End If
          Next oPlaceHolder
          ' See if a slide number placeholder was found.
          ' If not found, exit the macro.
          If bFound = False Then
             ' Unable to find slide number placeholder.
             MsgBox "Your master slide does not contain a slide number " _
                & "placeholder. Add a " & vbCrLf & "slide number placeholder" _
                & " and run the macro again.", vbCritical
             End
          End If
          ' Set up the string for the input box.
          strPrompt = "Type the name of the custom show you want to print." _
             & vbCrLf & vbCrLf & "Custom Show List" & vbCrLf _
             & "==============" & vbCrLf
          ' This is the title of the input box.
          strTitle = "Print Custom Show"
          ' Use the first defined show as the default.
          strDefault = _
             ActivePresentation.SlideShowSettings.NamedSlideShows(1).Name
          ' Obtain the names of all custom slide shows.
          Dim oCustomShow As NamedSlideShow
          For Each oCustomShow In _
             ActivePresentation.SlideShowSettings.NamedSlideShows
             strPrompt = strPrompt & oCustomShow.Name & vbCrLf
          Next oCustomShow
          Dim bMatch As Boolean: bMatch = False
          ' Loop until a named show is matched or user clicks Cancel.
          While (bMatch = False)
             ' Display the input box that prompts the user to type in
             ' the slide show they want to print.
             strShowToPrint = InputBox(strPrompt, strTitle, strDefault)
             ' See if user clicked Cancel.
             If strShowToPrint = "" Then
                End
             End If
             ' Make sure the return value of the input box is a valid name.
             For Each oCustomShow In _
                ActivePresentation.SlideShowSettings.NamedSlideShows
                ' See if the show is in the NamedSlideShows collection.
                If strShowToPrint = oCustomShow.Name Then
                   bMatch = True
                   ' Leave the For loop, because a match was found.
                   Exit For
                End If
                ' No match was found.
                bMatch = False
             Next oCustomShow
          Wend
          ' Get the array of slide IDs used in the show.
          Dim vShowSlideIDs As Variant
          With ActivePresentation.SlideShowSettings
              vShowSlideIDs = .NamedSlideShows(strShowToPrint).SlideIDs
          End With
          ' Loop through the slides and turn off page numbering.
          Dim vSlideID As Variant
          Dim oSlide As Slide
          Dim Info() As SlideInfo
          ' Make room in the array.
          ReDim Preserve Info(UBound(vShowSlideIDs) - 1)
          ' Save the current background printing setting and
          ' then turn background printing off.
          Dim bBackgroundPrinting As Boolean
          bBackgroundPrinting = _
             ActivePresentation.PrintOptions.PrintInBackground
          ActivePresentation.PrintOptions.PrintInBackground = msoFalse
          ' Loop through every slide in the custom show.
          Dim x As Long: x = 0
          For Each vSlideID In vShowSlideIDs
             ' The first element in the array is zero and not used.
             If vSlideID <> 0 Then
                ' Add slide ID to the array.
                Info(x).ID = CLng(vSlideID)
                ' Get a reference to the slide.
                Set oSlide = ActivePresentation.Slides.FindBySlideID(vSlideID)
                ' Store the visible state of the page number.
                Info(x).IsVisible = oSlide.HeadersFooters.SlideNumber.Visible
                ' Turn off page numbering, if needed.
                If Info(x).IsVisible = True Then
                   oSlide.HeadersFooters.SlideNumber.Visible = msoFalse
                End If
                ' Create a text box and add a temporary page number in it.
                Dim oShape As Shape
                Set oShape = _
                   oSlide.Shapes.AddTextbox(msoTextOrientationHorizontal, _
                                            rect.l, rect.t, _
                                            rect.w, rect.h)
                ' Apply the formatting used for the slide number placeholder to
                ' the text box you just created.
                oShape.Apply
                ' Add the page number text to the text box.
                oShape.TextFrame.TextRange = CStr(x + lStartNum)
                ' Increment the array element positon.
                x = x + 1
             End If
          Next vSlideID
    ' Print the custom show. NOTE: You must turn background printing off.
                 With ActivePresentation
                 With .PrintOptions
                 .RangeType = ppPrintNamedSlideShow
                 .SlideShowName = strShowToPrint
                 End With
                 .PrintOut
                End With
          ' Restore the slide information.
          For x = 0 To UBound(Info)
             ' Get a reference to the slide.
             Set oSlide = ActivePresentation.Slides.FindBySlideID(Info(x).ID)
             oSlide.HeadersFooters.SlideNumber.Visible = Info(x).IsVisible
          Next x
          ' Restore the background printing setting.
          ActivePresentation.PrintOptions.PrintInBackground = _
             bBackgroundPrinting
       End Sub

    Hi hlolrich,
    According to the description, you want to remove the shapes which created after you print the presentaion.
    I suggest that you name the shape you added with some rule, then we can delete thease shapes via the name rule.
    And here is a sample that you delete the shapes which name contains the
    myShape words on the first slide for your reference:
    Sub deleteShapes()
    For Each aShape In Application.ActivePresentation.Slides(1).Shapes
    If InStr(aShape.Name, "myShape") Then
    aShape.Delete
    End If
    Next aShape
    End Sub
    Also you can learn more about PowerPoint developing from link below:
    How do I... (PowerPoint 2013 developer reference)
    PowerPoint 2013
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Adobe XI remains open after printing from command line

    I am using a program to collect, batch print and delete multiple PDF files.
    The following command line is used to print the files, after which the file is deleted and next file is collected.
         "C:\Program Files\Adobe\Reader 11.0\Reader\AcroRd32.exe" /T /N FileName.pdf
    I have now upgraded to Adobe XI, however Adobe remains open (and minimized) after sending the print job to the printer, resulting in my programing freezing while waiting to delete.
    Is there a parameter to close Adobe after printing?
    This is rather urgent as we have started rolling out the new Adobe XI.
    OS = Windows7 Prof x64

    Command line parameters are sparsely documented and are officially not supported. What is documented can be found here: http://partners.adobe.com/public/developer/en/acrobat/sdk/pdf/intro_to_sdk/DeveloperFAQ.pd f
    I've not seen anything that shows what you want to do.

  • TS3581 iPhone 4S - The XCarlink iPhone/iPod accessory for Mazda Bose autochangers is functioning differently after iOS 5.1. The Shuffle function no longer works. Has anyone else experienced this problem?

    The XCarlink iPhone/iPod accessory for Mazda Bose autochangers is functioning differently after iOS 5.1. The Shuffle function no longer works and it plays Albums or Genius Playlisys only (not self-made playlists). Has anyone else experienced this problem?
    Previously, the iPod function enabled one to see the track that was playing and control playback (such as repeat or shuffle) via the iPhone screen. Now all I see is an "Accessory Connected" message.

    Somewhere in there, is there a question for us, your fellow users in these user to user support forums?

  • HP laserJet 5200dtn making buzzing/humming noise after printing

    Hi,
    We have about three of these units in our office and one of them has recently began to make a loud buzzing/humming noise during and after printing a document. THe noise last about 5-10 seconds after the print job completes.  I can also make the printer buzz by removing the duplexer and puting it back in. The printer seems to load and then the buzz noise happens, again for about 5 seconds. I am aware of normal noise from these printers and this buzz is not normal.
    This noise gets louder as the day goes on. Could this be a fan motor going bad?  We need to do somthing to get it quieter.
    Any help or suggestions?
    Thanks

    any suggestions?

  • Slow GUI after Printing

    After printing, my swing gui takes 3 times as long to update 2d graphics (using paintComponent). Before printing, it updates very quickly, and the slowdown only occurs after printing. Anyone know how to fix this?

    Tippity Top

  • Black spaces in Acrobat, text after printing

    Hello, may I get help please - in some documents, there are black places in Adobe Acrobat Pro 9 where after pringting is a proper text. I checked for updates, there are none available. Also, in Adobe Reader, the text (or pictures) is visible as it is after printing. The only problem then is in Adobe Acrobat. Would you know where is a problem? Thank you in advance!

    Hi Alena Kol,
    What os are you using? Could you please attach the snapshot of the application window so that i can look into this issue or if possible, then please send me a sample pdf at [email protected] ?
    Moreover does this issue occur with this specific pdf or with all the pdf files?
    Regards,
    Rahul

Maybe you are looking for