Color and Contrast Change when opening pictures in PhotoshopCS3

I just calibrated my monitor { Mac book 15 inch Pro}  using Display Calibrator assistant. I used the Expert mode. I normally had it Calibrated with HUEY PRO. I was not liking my print results with Huey. So I matched the print to the new calibration using Display Calibrator. Now that the pictures match. I go to open one in Photoshop CS3 and the picture darkens, more contrast, and high in Saturation. I can view the picture in photoshop and see it in Bridge at the same time and they are dramatically different. I have all my color spaces set in photoshop the right way using the SRGB for working and that is the format I Shoot in. I have not changed anything except the new monitor calibration. Any one know what could be happening? THanks!!!

Now that the pictures match.
Which pictures match?
Are the profiles embedded in the images?
What are the Color Management Policies?

Similar Messages

  • Camera raw 8.7 color and contrast shifts when file opened in ps 6

    camera raw 8.7 color and contrast shifts when file opened in ps 6

    Thanks ssprengel for the suggestions and running a side by side yourself. I went through all my settings and applied your suggestions and did a side by side each time. I even uninstalled the entire creative suite on my system then reinstalled and updated and I still get the same outcome. It was fine yesterday with the previous version of ACR. It seems like the updated version is not showing the image preview in any color space. When I switch the color space in the workflow options the histogram changes but it doesn't seem to affect the preview window. And yes the preview button was checked on it was just when I was using the screen grab tool in windows it took focus away from the application so that is why the settings appear grayed out. I have attached more screen grabs below illustrating all my settings. Also here is some system info if anyone out there has a similar setup and would be willing to test.
    Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1

  • Since installing CS6, jpg thumbnails viewed in Bridge lack color depth and contrast. When opened in

    Since installing CS6, jpg thumbnails viewed in Bridge lack color depth and contrast. When opened in Photoshop, the color and depth is normal. How can I correct the issue in Bridge? I have emptied my Cache and that has not corrected thed issue. Thanks to anyone who can help!

    Unless using embedded thumbs, you need to set your ACR defaults, and make uncheck auto settings in preferences/camera raw.

  • Chose white color and obtain purple when opening again the color window

    Hi,
    I have installed fresh new Illustrator CC 2014
    I have noticed a great  bug
    I create a vector shape, I fill it with white color . All is Ok
    Now, i click in the color explorer in order to change the white color and it show me a purple color !!
    What's happen ??

    I start with white color ! and when i open my window color, it's purple CMJN code !
    So i replace CMJN code purple by CMJN code white. I close the window and when i open once more, it's again the purple code !!!

  • Color and size changed when upgraded to photoshop CS5

    Hi, I created a flyer in an older version of photoshop and when I upgraded to CS5 the colors and print size changed. This is particularly distirbing b/c this is a flyer/advertisment for work that was almost at the final stage. They are quite small changes, but changes that need to be corrected just the same. The colors look different (duller) on the screen and in print while the size became smaller when I print (to pdf and the printer). My print settings are the same as before as are my color settings (CMYK). I am fairly new at creating flyers in photoshop, so I am hoping this is a simple fix. Thanks.

    Are you 100% certain you are using the same color profiles throughout? That print size issue might be specific to your printer driver... CS5 has a completely rewritten print handling which may not correctly cooperate with your printer driver or conversely the driver might need to be updated...
    Mylenium

  • IMovie clips turn black or clear when rendering color or contrast changes

    I have several iMovie projects on 6.0.2 using a MAC G4 Dual 800 MHZ computer with OS 10.4.7, two Internal 80GB HD and a 160GB External HD. I am using a 20" ViewSonic VA2012wb screen.
    I have split up and edited some 25 clips and am now doing some color and contrast corrections on some very old 8mm films from the 40's.
    Following the rendering process, when I return to the clip to view the results, part of the clip is corrected and the remaining part is blank with either black screen or sometimes white. If I click on "restore to original" the clip returns to a full clip with all the image. Originally I thought the blank was caused during uploading and therefore cropped out that portion and lost some footage. It does not occur consistantly and seems to occur when the film is very dark or the colors are very faded and requuires drastic changes.
    Why does this occur? What should I be doing differently?

    If you are using iMovie on Mac OS X 10.7 (Lion) try this:
    First delete the iMovie Preferences file:
    Go to the Desktop
    Look for the Go Menu (hold down the Option key) then click on Go Menu
    Choose Library
    Go to Preferences > com.apple.iMovieApp.plist
    Drag that file to the trash, restart iMovie and see how it reacts
    Second step is to Repair Disk Permissions
    Restart your Mac while holding down the Option key
    When you see the two startup volumes appear, choose Recovery Volume
    Run Disk Utility > Repair Disk Permissions (an let it run until it completes)
    Quit Disk Utility, and reboot the Mac
    Launch iMovie and see how it reacts
    Lastly, Check out this Discussion Thread from September
    I movie quits unexpectedly during editing and publishing
    from Jasonryan1. It relates to a corrupted item existing in his project. And in his attempt to troubleshoot it, he suspected it was a Title he placed in the Project itself. So it might be the case something got corrupted within your project that's preventing the video clips from playing back properly.

  • Visited link color is not changing when there is no page redirection

    Visited link color is not changing when i just open a popup on clicking the hyperlink.. whereas visited link color gets changed when i redirect to a new page on clicking the hyperlink
    I want to have my visited link color to change even if i show a popup on clicking the hyperlink
    This works fine with IE..

    Hi,
    Have a look at the user status table TSOCM_STAT_PROP and see if there are any unwanted PROCESS_TYPE <> STSMA combinations.
    For your process type there should only be one kind of status schema assigned.

  • Color and contrast different from Premiere Pro 2 DVD creation

    I found after creating DVD's via Premiere Pro 2 are more saturated and more neutral in color vs encoding through Encore.
    I made a si8de by side test, converted them back to AVI and grabbed the same still of each. The Encore still was lower in contrast (flatter) and a slight bit warmer. over all the DVD compression from PP2 gives a richer look. If you are a film maker or photographer this matters a lot, but not for most users.
    the file sizes from premiere are bigger. for example a 8mbs from a 7:30 avi compression on premiere resulted in 544mb while a 9.4 compression via encore 2 resulted in 464 mb. when changing the mbs from 8-9.4 mbs it resulted in exactly the same size file 464mb. even when starting a new project, which means that there might be a bug and encoding on a unknown predetermined mbs, probably 7. This would explain the flatter look of the Encore 2 compression.
    Does anyone know how to find out at what rate a dvd has been encoded after it's done? knowing that there isn't any difference in the file size between 8mbs and 9.4 mbs shows that there must be a problem.
    This test was done with the Encore DVD 2 trial version. I have vs 1.51 as well and will make a test on this one as well. to see if there is the same problem.

    1. Can you detail your exact method, step-by-step, for both Premiere and Encore?
    encode encoded in premiere 2 at the highest level 9mbs (didn't chapter for a simple auto disk, this is disabled in pp2 but you can save as an mpg2 and import for chaptering in Encore2)
    2. Did you use the exact same source files for all tests, or just files that were the same duration?
    Exactly the same source file, when importing the mpg2 into premiere i simply imported each file in the timelime and saved exactly the frame of each mpg2. All this started when i first compared 2 encodings from a film directors reel where quality is crucial, and saw it immidiatly when playing the 2 different dvd's of the same reel on a DVD player (JVC) and Sony monitor.
    3. Be sure to include project settings and program preferences for both applications.
    encore 2 encoded at cbr 1x 9mbps (highest)
    Premiere 2 encoded at cbr 1x 8mbps (highest)
    when setting to 9mbps in PP2 I get the3 following warning:
    Total Video and audio bitrate (10.536 Mbs) exceeds maximum allowable bitrate (10.030 Mbps) for DVD type of muxing.
    So i reduced the bitrate to 8 and still got a file of 557mb and better color and contrast than Encore2.
    The final results of encoding in PP2 gives an identical DVD mpg as far as color and contrast to the original AVI.
    When encoding at the max rate of 9 in PP1.5 i never got this warning.
    I just repeated the above test on more time in PP2 and Encore DVD 2
    they must use a different codec for Encore2 than PP2.
    Besides the color and gamma shift the image size horizontally is a slight bit different (larger) than the one done with PP2, but not verically.
    you can also encode in PP2 save it as a multiplexed mpg2 file and than chapter it for the final dvd in encore2 which gives you the higher quality results of PP2.
    Klaus

  • How can I get the color and contrast on photos to appear the same in Organizer and Editor?

    In PSE 10 (Windows 7), When I edit photos in the Editor and get them the way I want them, they appear considerably different when I send them back to the Organizer, both in color and contrast.  Since I print from the Organizer, they appear in print as they are in the Oganizer, and it's not what I had in the Editor.  I set the color the same in both Editor and Organizer from the Edit menu, but I still have the problem.  Any assistance would be appreciated.  Thanks in advance. 

    See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
    Recovering your iTunes library from your iPod or iOS device
    B-rock

  • Hyperlink color doesn't change when hovering over link

    I create hyperlink, color I select for hovering over link works fine. But sometimes when I publish to my website the link color does not change, but the link works ok. I go back to my mac and check, sure enough the color changes just fine. I wipe out the link and reinsert new one. Works fine on the mac, but when I publish, color does not change when hovering. Help.

    Welcome to the discussions. This is a long shot, but try clearing your browser's cache and reloading the page — then see if the color changes when hovering. ( In Safari, click on the Safari menu and choose +Empty Cache...+ )

  • "Last modified" attribute changes when opening a Excel-document

    Hi
    We are running Server 2008 R2 as terminal servers and fileserver. 
    When opening an Excel document stored on the fileserver so changes "date modified" at the opening regardless if you save the document or not. This is a problem for users who want to keep track of when the document has been changed "for real".
    Now, "last modified" changes when the document was last read instead, this confuse the users...
    If we test the same procedure on our older terminal server environment, Server 2003 or on our clients (Windows 7) it works how we wanted. The "last modified" only changes when you save the document, and not when you are opening it. Office
    2007 is installed on both our new terminal server environment (Server 2008 R2) and the old one (Server 2003). 
    Can someone explain to me why it behaves like this? And if anyone got a solution? It's only occur on Excel-documents and not the others Office documents...
    Thanks in advance

    Hi tomburken,
    It seems that this is not a server issue .
    This issue may due to the " automatically save " executed by some office scripts .
    To get the accurate assistance please post this issue to Microsoft office forum :
    http://social.technet.microsoft.com/Forums/zh-CN/home?category=officeitpro&filter=alllanguages
    Best Regards
    Elton JI
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Mail- Images color and contrast?

    Why is it that Apple forgot color management in the Mail program. I am a photographer and I have my images approved by the client via email. Shoot to CaptureOne Pro then Process raw to tiff open in Photoshop and the color and contrast match convert to Jpeg and attach to email and it looks muddy in the email. Clients respond to me image looks flat what is wrong with it. All my clients use Adobe 1998 color space. I have to tell them to open it in photoshop and they always say "Oh thats better"
    Am I missing the option to use Adobe 1998 instead of sRGB in the mail program? Some of my clients use the Jpegs for placement in their layouts so I need to keep the Adobe 1998 color space and not convert it to sRGB just so it will look right in one of a series of programs.

    Why is it that Apple forgot color management in the Mail program.
    I assume because images are sent as attachments which appear inline or viewed in place within the body of the message by default with the Mail.app which is not the same with all email clients.
    If you send such attachments to a recipient using Windows Outlook or Outlook Express, the attachments will appear as attached files only which must be opened separately in order to view.
    I don't believe the majority of people that use the Mail.app need it to be used in such a fashion and I don't believe any email client has anywhere near Photoshop's color management capabilities since this is not what an email client is primarily designed for.

  • My eyes failing, or has Jive been messing with the typographical color and contrast of text?

    Are my eyes failing more egregiously, am I having another one of my increasingly frequent senior moments, or has Jive been messing with the typographical color and contrast of text in the forums?
    For some reason, I'm noticing today a very weak gray text and diminished contrast between text and background?
    Monitors regularly and often calibrated with hardware pucks. 
    I had my eyes checked and new prescription glasses in the last few months, now I wondering what other tests I may need.  Or is it really Jive messing with us again?
    Thanks in advance.

    I hope you have slept well, my friend, and again find the forums to be as pleasurable to use as always.   
    Your screen grab seems exceptionally clear and contrasty to me, when shown at full-size.
    I have personally blocked typekit.com so as to avoid using the Adobe fonts entirely.  That seems to have helped me deal with this place better.
    Here's what Dave sees (his screen grab from above) vs. what I see here (mine's on bottom):
    Latest trouble for me is that for about the past week I have to log in every time I visit, regardless of the selection of [  ] Remember Me.  That's just a little too much trouble to go through to be at this wonderful place.  Sigh.
    -Noel

  • How do I lighten up a sequence without loosing color and contrast?

    how do I lighten up a sequence without loosing color and contrast?

    What have you tired so far? Color correction can be a bit of a challenge until you get comfortable with it.
    Also, unless your sequence is one uniform scene, it would probably be better to go on a clip by clip basis to make these adjustments - but here is one quick way to do it for the whole sequence, which may or may not give you the results you are looking for:
    Apply an Adjustment Layer that covers the duration of your sequence.
    Apply the Fast Color Corrector to the Adjustment Layer.
    In the settings for the Fast Color Corrector, bring up the Input Gray level a bit (this will lighten the scene) and raise the Input Black Level (this will help restore some of the contrast). If you need to make the bright portions of the scene brighter, bring down the Input White Level.
    Go slowly with small adjustments and  adjust to taste. You'll need to work back and forth on those controls to get the best compromise.
    If you want more color, increase the Saturation a small amount.
    MtD

  • Color and density changes DV MPG-2

    Ever wonder about what color and density changes may be taking place in your video clips as they go from DV to MPG-2?
    The bottom line: there are slight changes going from DV to MPG-2 that darkened most of the patches, but the changes (although noticeable) are VERY SMALL.
    If you want to review my experiment and see an image showing the changes, go to: http://homepage.mac.com/profpixel/color_bars/colorbars.htm
    I hope at least a few of you find the experiment interesting. Let me know.

    bump....

Maybe you are looking for