Color artifacts with A7s and A6000 files using Camera calibration profiles

I'm seeing some really obvious chroma artifacts / false colors with RAW files from either a Sony A7s or A6000 when using any of the Adobe-provided Camera calibration profiles that emulate Sony's rendering.
This seems to happen at any ISO, and is very frequent.
If I use the Adobe Standard calibration profile then things look normal, but that's might just be because it produces rather desaturated images compared to the "sony" profiles.
Prior to those Sony cameras I was using Nikon DSLRs for which I had somewhat similar issues when using the first version of the Nikon camera profiles.
Those issues got fixed when Adobe released the "v4" camera profiles.
Below are some examples without any adjustment, the only difference is the choice of camera calibration profile:
Camera Landscape:
Adobe Standard:
Camera Standard:
Adobe Standard:
Camera Landscape:
Adobe Standard:

The legacy ACR X.x profiles are no more produced nor included for newer cameras (AFAIK, since ACR 5.1/LR 2.1). The Adobe Standard is the new default starting point for these.
While I am at it....are the Canon camera profiles I downloaded for the 1Ds MKII the same as for the 5D MKII or do I have to download different one...I suspect they are the same or Lightroom wouldn't offer them to me...is that correct?
The profiles are different for each camera model, even if they share the same name in the Calibration panel. If you can see them when developing 5DII files, it means the camera-specific profiles are installed for your particular camera model (otherwise, you wouldn't see them).

Similar Messages

Color managment - CS4 doesnt seem to be using the calibrated profile

This problem has been plaguing me since setting up a dual screen.
My main screen is a dell 2410. I have calibrated it with an eye1.
My test prints from 2 seperate pro labs arent the same as what I see on my screen from inside PS. BUT are perfect to how the image appears when viewed in windows. If I soft proof within PS to 'monitor RGB', it is perfect to the print (which is redder than how it is appearing in PS)
It is as if PS isnt using the right profile.
I've double checked that my main monitor is set to the calibrated profile as default in windows color management for Win7
The colour setting in PS are set to Nth american general purpose....but when I fiddle around with comparing it to the soft proofing profiles it goes back to 'custom'
I'd appreciate any thoughts
Rowena

I installed Toshiba bluetooth Stack 8.00.03 as non-TOSHIBA USB Bluetooth adapters. I paired "AND UA-767PBT-C" which is Continua compliant Blood Pressure monitor with Bluetooth manager in netbook and the device is listed as one of the connection in Bluetooth settings. But in Toshiba bluetooth settings windows, the AND device is appearing with status as "Not Connected". When I try to connect, I get message as "Connect from health care ready application.". I went to "options" - "other" - "Health Device Settings" and checked "Displays a message when data is received from the Healthcare Device".
When I get the readings from Blood Pressure monitor, no data comes on the computer's system tray or Toshiba bluetooth application. What should I do so that I can view the readings from blood pressure monitor onto the computer? In the manual it is mentioned that Toshiba bluetooth stack will display the readings on the computer.
Do we have to use any APIs to get the readings out of Toshiba's bluetooth stack?.
Any help is appreciated.

Problem with Photoshop CS6. If I open a file using Camera RAW

I have a new problem with Photoshop CS6. If I open a file using Camera RAW, and process it as usual, CS6 doesn't want to save it the way it used to. I don't know if I changed something by accident or not.
Here's what happens now: After opening from ACR to CS6 and completinhg all of my work, I choose "Save as..." The save as window opens showing the file name and format. The default format seems to be .PSD. I use the drop down to select .jpg. The file saves normally as a .jpg. When I go to close the image from, I get a new prompt asking, "Save changes to Adobe Photoshop document DSC_xxxx.NEF before closing?
I looked up at the file name in the bar above the work space and noticed that it does NOT change from "DSC_xxxx.NEF" to "DSC_xxxx.jpg" after I have saved the file as a .jpg,in my webesite but it always used to do that. This adds a few extra steps when closing a document and it really slows me down.
In fact, I wouldn't swear to this, but I think it used to save to .jpg by default, without me specifying this.
I don't see a setting in the preferences for what to use as the default file format for saving, so I don't know where to change it back.
Any ideas?
Thanks in advance

You are in the wrong forum; You actually need Photoshop forum at this link:
<http://forums.adobe.com/community/photoshop?view=discussions>
Hope you can repost your question at the correct link.

Color issues w/ .png and .gif files in CS5.5 Live view

Hi All,
I am having a bunch of trouble with my .png and .gif image files in Dreamweaver CS5.5. In Dreamweaver's design view everything looks fine but when I preview my pages in Live View or in a browser the colors in my .png and .gif files are way off. All my images are designed in RGB.
Any info anyone has to offer will be greatly appreciated. Thanks!

GIFS contain a maximum of 216 colors (web safe palette)
PNG and JPG can contain 16 million colors (true color palette),
When you say the colors are "way off" we don't know what you mean.
Can you post a link to your web page?
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Popup with open and save file option

Hi,
I have created a button on my page name as "Export File" and created a process and called on "EXPORT FILE" button. I am using utl file in this procedure and i want to download this file and file will be .ics file using for calendar.
My page process code is
begin
pro_create_ical(:P6_START_DATE,:P6_END_DATE);
end;when i click on export file button it should raise a popup with open and save file option.
How i can do this?
Thanks & Regards
Vedant
Edited by: Vedant on Jan 25, 2013 1:59 AM
Edited by: Vedant on Jan 25, 2013 2:00 AM
Edited by: Vedant on Jan 25, 2013 3:49 AM

Shiv,
Have you installed any new Software/Spyware/Virus Scanner etc.Check it out.It might have caused the issue for last 5 days.
This issue is fixed in Latest Support Package Versions.
Which Version of Support Package you are using?
If EP6 <SP19 you will face this issue.
Just upgrade it to EP6, Support Pack-19,this will be resolved.
Upgrade of Support Pack wont take much time.you can get the document under http://service.sap.com/instguides
Hope it helps
Regards,
Karthick Eswaran
*Reward Points for helpful answers.

Creating data and .par files using SWIFT Integration Package

Hi,
I have a requirement to generate a data and .par file using SAP PI Integration package for SWIFT.
I am following the SAP Note: 1303428.
I have created 1 sender and 2 receiver comm channels(one for payload and other for par). Used operation mapping SWIFT_payload_parFile_split in the Interface determination.
I am using the adapter module : localejbs/swift/FileActConversionToSWIFTModule and setting the parameter DetachParameters to true. This adapter module is being used in all the three channels(1 sender and 2 receivers).
I have used ASMA ans has set the FileName checkbox.
Now after placing the file in the input directory, the file with the same name gets created in the output directory but the file is exactly same and also no .par file is getting created. I have set the Empty file handling to Ignore, so it shows that there is no data to create a .par file and only payload file is getting created but the payload file is exactly same.
Also if I use the adapter module : localejbs/swift/FileActConversionToSWIFTModule in only the sender communication channel, a payload file gets created like below.
<?xml version="1.0" encoding="UTF-8"?>
-<ns1:SWIFT_payload xmlns:ns1="http://sap.com/xi/SWIFT"><payload>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</payload></ns1:SWIFT_payload>
But while creating the par file, it shows that the file could not be overwritten and so the .par file is not getting created.
I need to understand that:
1) How do I configure both of my receiver channels i.e. what should be the difference. Currently, I am just setting the
same Output directory in both and file name schema * and has used ASMA with FileName parameter. So same name files are getting created and so one file gets discarded. How to create a .par file.
2) Also Is the file above is the correct file required by SWIFT.
3) Also when I check in SXMB_MONI, I can see that after running the adapter module same payload as given above is going in both payload and par files i.e. also if I am using different names in my receiver communication channels two files are getting created payload and par both are having the same payload. So what exactly should get created.
Kindly guide on this implementation.

Hi,
I am able to generate the .par file by setting the localsecurity to true and the KeyId from the key manager.
Now two files are getting created .xml and .par. .xml file which is the payload file is the same as the input file with no difference and contains both the overrides and the data parameters. The .par file contains the Algorithm and the Value.
Is this correct?
Also suppose the input file name is SEPA.xml, then the payload file is created with the name as
SEPA.xml and the par file is created with the name SEPA.xml.par. I need only SEPA.par. How to achieve this.

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile b

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile by changing the color management settings, the color picker no longer shows true white or black. How do I get elements 12 to honor the new calibrated settings?

Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-)

Minimum version required to upload and download files using Netweaver Gateway

What is the minimum service pack required to use the feature of Upload and download files using netweaver gateway. I already have a SP05

Hi,
as per this blog How to Read Photo from SAP system using SAP Gateway this should be possible with SP05.
also refer How To Upload and Download Files Using SAP NW Gateway SP06
Regards,
Chandra

Making a .EVO and .MAP file using DVD studio Pro..............

I am trying to make a .EVO and .MAP file using DVD Studio Pro. Please dont respond to this if you have no idea what this is. Dealing in real HD situaiton....trying to find a quick and dirty way to make these files as placeholders, was hoping DVD studio Pro could do it. Thanks.

you cant make them using DVD Studi pro, since they are for TRULY 1080p (23.98fps) projects using vc1.
funny thing is if you know about these files, you would also KNOW that DVDSP does not do this!
i have seen this files on the toshiba GUI but have not seen them with the blu-ray authroing compile.
also, i am going to have to say that if you are TRULY "Dealing in real HD situaiton." you wouldnt NEED DVDSP.
so ease up with the chip and if you have a REAL question ask it, if yo uare just here to show your feathers.. not interested!

Aborting index build. Too many errors with finding and copying files ...

Hi dears,
I'm using UCM 11g.
I'm trying to start the automatic update cycle. When i start it, it gives me an error message just like :
Indexing aborted at :<time>. Aborting index build. Too many errors with finding and copying files to the appropriate place.+
Can anybody help me about this problem?
Helps will be appreciated.
Erdo
Edited by: erdo on 28.Mar.2013 11:11

Read this: error in Collection Rebuild Cycle
and maybe also UCM Indexer - Collection Rebuild Cycle errorring out

Problem with Preview and PSD files - random gray square

Hi guys, hope you can help...
I've got a problem with Preview and PSD files.
If I open in Preview both an original jpg straight from my reflex and the photoshop version of the same picture, the psd file presents a gray square (of what it seems unrendered image) in a random area of the photo (sometimes in the center.). The square is quite big...
If I zoom in or zoom out it disappears...if I scroll to another photo and then back to the psd, the square it's there again...sometimes in a different position.
I've tried the same psd on my older iMac with leopard...and got no problem at all.
I suspect it got something to do with my Ati...
(this is the second iMac 27...the first went back for gray banding on the lcd screen and flickering and yellow tinge........)
Thanks for your help.
DAve.

maybe I'm onto something...
I've just found out that opening Preview in 32bit mode (instead of default 64bit) works flawlessly with any psd files. If I switch back to 64bit mode, Preview is much faster but the gray square comes back...
It seems like the i7 is much faster than the Ati....
Any more realistic ideas?

Is there a way of running cd's"windows" formatted with inf and swf files?

Is there a way of opening and running CD's 'window' formatted with .inf and .swf files on a mac??

In your operating system, move the photos to wherever you want them to be (keeping the folder tree structure the same), and then in Lightroom re-link via http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

Printing messages in Log File and Output File using Dbms_output.put_line

Hi,
I have a requirement of printing messages in log file and output file using dbms_output.put_line instead of fnd_file.put_line API.
Please let me know how can I achieve this.
I tried using a function to print messages and calling that function in my main package where ever there is fnd_file.put_line. But this approach is not required by the business.
So let me know how I can achieve this functionality.
Regards
Sandy

What is the requirement that doesn't allow you using fnd_file.put_line?
Please see the following links.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Dbms_output.put_line+AND+Log+AND+messages&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=%22dbms_output.put_line+%22+AND+concurrent&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Is it possible to create a tree with drag-and-drop functionality using ajax

I saw these samples;
Scott Spendolini's AJAX Select List Demo
http://htmldb.oracle.com/pls/otn/f?p=33867:1:10730556242433798443
Building an Ajax Memory Tree by Scott Spendolini
http://www.oracle.com/technology/pub/articles/spendolini-tree.html
Carl Backstrom ApEx-AJAX & DHTML examples;
http://htmldb.oracle.com/pls/otn/f?p=11933:5:8901671725714285254
Do you think is it possible to create a tree with drag-and-drop functionality using ajax and apex like this sample; http://www.scbr.com/docs/products/dhtmlxTree/
Thank you,
Kind regards.
Tonguç

Hello,
Sure you can build it, I just don't think anyone has, you could also use their solution as well in an APEX page it's just a matter of integration.
Carl

I'm so confused!! I just want to create interactive pdf files (with video and flash files), but this free trial version is confusing!! help!?!

i'm so confused!! I just want to create interactive pdf files (with video and flash files), but this free trial version is confusing!! help!?!

Thanks for your suggestions. I checked to see if the options you suggested were set incorrectly but they were set to sync all. This led me to think the problem was actually in the iphone. I re-initialized the iphone and did not allow the system to restore any of the previous settings. In essence, I forced the phone to reset to factory settings. Then my video podcasts started syncing. All is well now. I did notice that I had seven podcasts selected that were "HD" presentations, and as such, are not compatible with the iphone. I don't know if this had anything to do with my earlier situation, but now I'm getting the video podcasts automatically. I'm happy. It wasn't much fun forcing the iphone to forget all of my preferences and I'm still customizing the phone now several days later. I think I have everything working and back to normal except I haven't identified any of my email accounts as of yet. Thanks for your help.

Color artifacts with A7s and A6000 files using Camera calibration profiles

Similar Messages

Maybe you are looking for