Color becomes corrupt when I use Image Processor

I always use the image processor (file>scripts>image processor) to format my photos after editing. Last night in the middle of batching several sets, the processor starting saving my photos with colors that were really off. I tried closing the program and restarting my computer. No luck. If I open a photo in CS6 photoshop and then save it as a jpeg there is no color corruption. But if I batch photos using the image processor the color is horrible. I don't really want to unistall/reinstall photoshop if I don't have to because then I have to reinstall my plugins. Is there a way to fix this? I have been using CS6 for over a year now and haven't had a problem with image processor before. Although, sometimes when I open a photo in photoshop, the color is off (like in the left photo) and I have to close the program and re-open it. Below is an example of what happens.

Good day!
Is there a way to fix this?
Fix what? You have not given enough information to assess the issue.
What are the settings you use, do the images have their Color Profile embedded, what are your Color Settings …?
Regards,
Pfaffenbichler

Similar Messages

  • Error message when trying to use image processor in CS2

    Hi
    I am trying to use image processor to condense 500 proofs for my website - however although I have done many times before with no problem, now when I hit the Image processor button before I even get to key in details it is bringing up the sorry something major has happened message and I can't continue - the details of this message are as follows - ref error : this.dlgMain.ddset on Change is not a function :810 - does this mean anything to anyon? Any ideas on how to overcome would be much appreciated.
    thanks

    Go to Russell Brown's website and download his package for CS2. His 1-2-3 Processor is much more flexible than the one provided by Photoshop.

  • Using Lightroom 5.7, Raw files become from my Nikon D810 become corrupted when I select them to view or edit.

    .Updated to Lightroom 5.7 to accommodate the Nikon D810. Upon importing RAW files to the files become corrupted when they are selected to be viewed or edited.
    I am using Windows 7, 64 bit, with 8 GB Ram.
    Any help would be appreciated.

    There are several likely sources of corruption, and video card would be far down on my list of possible suspects.
    The transfer from camera card to hard disk is the most likely place for problem, either the card reader or USB cable can go bad. Another likely source of problems is the computer's hard disk is starting to fail. The camera card itself may be bad. And lastly, the memory in the computer may be malfunctioning.

  • When using image processor my images to select are grayed out

    when using image processor my images to select are grayed out, when they wernt yesterday? any clues? Have I done something stupid!
    many thanks
    carol

    Nothing to do with professional or not, but I do hope you know where your computer's power switch is. System information can be obtained this way:
    Working with your Operating System’s Tools
    Furthermore we need info where you store your files, what format they are in, where they came from, what you did the last time this worked, if possible...
    Mylenium

  • Colour washed out when using image processor in Bridge CS6

    Hi there
    I hope somebody can help please?!
    I am editing raw files in Camera Raw 8.2, then using image processor through Bridge CS6 to save them as both jpegs and tiffs.
    I am finding the colour on the saved files is coming out a little washed out and faded.
    If I open them individually and save them in PS6 as jpeg and tiffs, the colour remains vibrant and true to the original raw file.
    I have thousands of these files to go through and don't have time to open each one individually in this way so I am desperate to automate this process while still retaining the great colour in the original shots.
    Can anyone tell me why the shots are coming out this way and help offer a solution for me please?
    Any advice would be massively appreciated!
    Many thanks
    Benny P

    Hi,
    Do you have Include ICC Profile checked at the bottom of the Image Processor dialog?

  • How to Use Image Processor for Multiple Sizes

    I'm trying to use Image Processor to work on a folder of images and to create several sizes of .jpg's . I find an option to Save as JPEG in one size only. Is there any way to set up Image Processor to save JPEG to multiple sizes?
    Thanks in advance for your help!!!

    Hi Mehtap,
    Using the script will give you multiple selections.
    This is how I did it and it works well. It just separated the values by semicolon ";" .
    TEXT_1.setText(DS_1.getFilterText("0CUSTOMER"));
    When selected only one value:
    When selected more than one value:

  • I am importing videos from my canon sl1 to my macbook when i use iphoto is says "iPhoto cannot import your photos because there was a problem downloading an image." and when i use image capture it says "An error occured while importing. The item 'MVI_1040

    I am importing videos from my canon sl1 to my macbook air when i use iphoto is says "iPhoto cannot import your photos because there was a problem downloading an image." and when i use image capture it says "An error occured while importing. The item ‘MVI_1040'' Thanks in advance

    Can you access the images on the phone with Image Capture (in the Applications Folder) ?

  • [svn:fx-4.0.0] 13615: fix airframework/build. xml so the en_US _rb does not become corrupt when the other. locales target is run.

    Revision: 13615
    Revision: 13615
    Author:   [email protected]
    Date:     2010-01-18 20:59:14 -0800 (Mon, 18 Jan 2010)
    Log Message:
    fix airframework/build.xml so the en_US _rb does not become corrupt when the other.locales target is run.
    -removed the redundant en_US call in the other.locales target
    -added a clean for locales that will only remove the locale being built before rebuild - not all of the locales
    -add updated dita that does not contain spark references
    QE notes: 
    Doc notes:
    Bugs: no but Pete and I discussed briefly
    Reviewer:
    Tests run: doc and other.locales
    Is noteworthy for integration:
    Modified Paths:
        flex/sdk/branches/4.0.0/frameworks/projects/airframework/build.xml
        flex/sdk/branches/4.0.0/frameworks/projects/airframework/bundles/de_DE/docs/packages.dita
        flex/sdk/branches/4.0.0/frameworks/projects/airframework/bundles/fr_FR/docs/packages.dita
        flex/sdk/branches/4.0.0/frameworks/projects/airframework/bundles/ru_RU/docs/packages.dita
        flex/sdk/branches/4.0.0/frameworks/projects/airframework/bundles/zh_CN/docs/packages.dita

    What kind of projects are they (Struts/JSF/Hibernate)? Does the working project differ in any way with other two apps?
    What exactly is not working? Are they recognized by workshop as Struts/JSF/Hibernate app?
    Please send the .log to [email protected]

  • My photos are not printing right with adobe manages color but works when i use printer manages color. never had any issues untill a week ago.

    my photos are not printing right with adobe manages color but works when i use printer manages color. never had any issues untill a week ago.

    We use CS6, yes we calibrate using x-rite. I have always had adobe manage colors when printing. This problem just occurred, all my settings are the same as they have been for years. The only thing we did lately is do an update to CS6. We thought it might be our printer but when we use the printer manages color it works fine, The problem with adobe manages color is it is not blending the light highlights like on top of the cheeks with the colors around the cheeks  and its putting a faint red between the two it just does not have a smooth transition. I printed a photo that I had printed 4 months ago with no issue, and this time it had the issue that I am dealing with now. Somehow the photo shop manages color is not getting the right info to my printer.  
    I set paper type
    set quality
    no color adjustment
    set my profile
    Teri

  • Color washed out when using image processor in Bridge CC

    Hi,
    When I use the image processor - Tool>PhotoShopS>Image Processor, via bridge my colors appear wrong and washed out.
    When i choose "Include ICC profile" in the process dialog it has no effect - the colors are still wrong.
    In PhotoShop my profile is set to ProPhoto RGS, can that be the reason?
    When I save as JPG from Photoshop the colors are correct.
    any suggestions?

    Hi,
    Do you have Include ICC Profile checked at the bottom of the Image Processor dialog?

  • Losing raw edits when using image processor CS6.

    When I select a CR2 file(s) (that has been edited in ACR 7.1) and attempt to run it through image processor, all of my edits are gone. If I save as a JPEG manually every edit stays. Here is a shot of the files side by side. Left side is manual right side was with image processor.

    When i edit my images with Bridge and ACR (AdobeCameraRAW) ... when i finish ... i select all pictures i want ...
    So, i select "Tools/Photoshop/Images Processor" i select my options et click "RUN" ... so after process my images ... i check and every picture where a "CROP in ACR" will lose this configuration ...
    What JPEG Files ... level 10 no resize and no convert to sRGB profile
    i use CS6 (latest update) under latest OS X version

  • Using image processor from RAW format to JPEG, the images are suddenly very muted colour, greyish tone, and just awful looking.

    Any ideas as to why, when I am converting a group of images through image processor into JPEG, the resulting images are AWFUL.  I have been using this process for years without a concern, and suddenly the JPEG files are very greyish, muted tones and just terrible looking… HELP!  I'm WAY too busy right now to be dealing with this and having to manually save each image to JPEG

    Which Color Space are the images in?
    What are your Color Settings?

  • Resizing large quantites of images using image processor - STUCK

    I have upgraded to Photoshop CC. I am attempting to resize large quantites of images using the image processor. I need both the width and height set to an exact number for web use. When I enter the pixel size into the "resize" boxes and click run, the sizes i get are correct on one dimension but slightly off on the other dimension. When I just do one image at a time to these same dimensions it resizes correctly? It appears it only does when selecting large qunatites. Any suggestions?die

    Since you do not want to crop your images to a square 1:1 aspect ratio changing the canvas to be square will not make your images square they will retain their Aspect Ratio and  image size will be changer to fit within your 1020 px square. There will be a border or borders on a side or two borders on opposite sides.   You do not need a script because Photoshop ships with a Plug-in script to be used in Actions.   What is good about Plugins is the support Actions.  When you record the action the plug-in during action recording records the setting you use in its dialog into  the actions step.  When the Action is played the Plug-in use the recorded setting an bypasses displaying its dialog. So the Action can be Batch.  The Action you would record would have two  Steps.   Step 1  menu File>Automate>Fit Image... in the Fit Image dialog enter 1020 in the width and height  fields.  Step 2 Canvas size enter 1020 pixels in width and height  not relative leave the anchor point centered it you want even borders on two sides set color to white in the canvas size dialog. You can batch the action.
    The above script will also work. Its squares the document then re-sizes to 1020x1020  the action re-sizes the image to fit with in an area 1020 x 1020 then add any missing canvas. The script like the action only process one image so it would also need to be batched. Record the script into and action and batch the action. As the author wrote. The script re size canvas did not specify an anchor point so the default center anchor point is uses  like the action canvas will be added to two sides.

  • Problem using Image Processor from Bridge

    I have been using the Image Processor to process photos from Bridge for quite some time. However, I recently received an error message when I try to initiate Image Processor from Bridge and I have not been able to find any help topics that address my problem: I select images in Bridge to process, then click "Tools>Photoshop>Image Processor". Photoshop opens and the familiar Image Processor dialog box opens. Item 1 in the dialog box says "Process files from Bridge only" and has the number of files I have selected in parenteses. I select the file type and other settings in #3, and preferences in #4. When I click "Run", I get an error message window that says: "Script Alert. There were no source files that could be opened by Photoshop". The Image Processor works if I open the files in Photoshop first, then run it by selecting "File>Scripts>Image Processor" and tell it to process all open files.
    Would someone be able to help me with this problem?
    Thanks, Larry

    Usually when it worked before and not now, and you have added no new software or hardware I recommend resetting the preferences.  Hold down the Ctrl key and click on the Bridge icon to start.  You should get a reset window with 3 options.

  • Using Image Processor from Bridge

    I'm trying to use the image processor from within Bridge. I have done this several times in the past, as recently as last week.
    I have some files selected in Bridge. I select "Tools>Photoshop>Image Processor" and the dialog box opens. Step 1 indicates that I have files to process (10 in this instance), and I have JPEG selected as the file type to process. When I click "Run", I get an error message that says "Script Alert" in the title. The message in the window says "There were no source files that could be opened by Photoshop".
    I opened the same 10 files in Photoshop, and I was able to run the Image Processor on them while they were open in Photoshop. I'd rather not do this unless I have to.
    I haven't added any new programs or plug ins since the last time I used the Image Processor from Bridge.
    I had the same problem in early June, and the solution suggested then fixed the problem. I'm experienceing the same problem today, and the same solution doesn't seem to be working now.
    The previous solution was to reset the preferences by holding down the Ctrl key and clicking on the Bridge icon to start. A reset window with 3 options popped up. Now, w
    I would sincerely appreciate any help you could give me with this.
    Thanks,
    Larryhen I hold the control key down and click on the Bridge icon, I don't get the reset window. I tried it by control-clicking on the Bridge icon from within Photoshop, and I tried it by control-clicking on the Bridge icon from my desktop with Photoshop closed.

    Read you original post again and your last post and now I am confused.
    You said you reset your Bridge preferences, yet in post #1 you said " I hold the control key down and click on the Bridge icon, I don't get the reset window. I tried it by control-clicking on the Bridge icon from within Photoshop, and I tried it by control-clicking on the Bridge icon from my desktop with Photoshop closed.
    So with this said you have not reset the preferences unless you have gone in and deleted the file.  The Bridge Icon is the one one the desktop that you click to start Bridge.
    BUT, in last post you say you have a Mac.  So to reset preference believe it is Cmd key.
    No matter how you do it you need to get the reset window with the 3 reset options.

Maybe you are looking for