Color changes when using the bone tool

When i'm animating some legs or something like that with the bone tool the leg turns in random frames to black. So between the pose you get flickering black legs, i can select the frame where to leg is black and change it just a bit and then the leg goes back to normal. But when i have to do this with long animations it takes ages. Does anyone recognize this problem? Because ive looked the internets but havent found any solution. Please help
Frank

Hi Sirharish,
Can you try the solution in the forum post Bone tool no white for overlapping?
Thanks,
Preran

Similar Messages

Error when using the Bones Tool

I'm getting the following error every time I use the bones tool:
Plugin tool script error in method mouseUp
Plugin tool script error in method deactivate
Version is 10.0.2.
Any ideas?

Hmmm..
Well first, uninstall and reinstall Flash CS4. Then retest it BEFORE running the 10.0.2 update.
Then update to 10.0.2 and retest again.
If it still happens at that point on all files and all efforts to use the Bones tool please open a support case via http://www.adobe.com/support/flash .

Avoid white places when using the Bone Tool (was: Bone Tool)

Hey!
My question is that is there anyway to avoid those white places that come when overlapping in bone tool?
Thanks in advance.

Hi Sirharish,
Can you try the solution in the forum post Bone tool no white for overlapping?
Thanks,
Preran

I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I hav

I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I have viewed some videos and read numerous articles but haven't found the one to help me. Please point me in the best direction. Thank you Vincent TC

For the sake of clarity and to save people time, Todd is asking about the behaviour of the Patch tool when using it to repair the area next to the young lad's head. Todd gets a blurred dark tone pretty much regardless of the options he uses.
IMO that's what I would expect to happen because of the close proximity of the other image elements i.e. the lad's neck and the strong lines of his shirt. I would not choose to use the Patch tool in this situation. Content Aware Fill makes a better stab at it.

When using the brush tool to paint a color, it is painting different, random colors

When using the brush tool to paint a color, it is painting different, random colors (Elements 11)

Click on the top right corner in the tool option bar of the brush tool and select "Reset Tool". Probably your blending mode other than 'Normal' is selected.

Why do I get bright colors when using the smudge tool?

Why do I get bright colors when using the smudge tool?

Thank you!!!
*Caryl *
(my flickr page ↓)
*https://www.flickr.com/photos/feathersarenice/
<https://www.flickr.com/photos/feathersarenice/>*
We were all born mad. Some remain so.
"Reality is whatever refuses to go away after I stop believing in it."
Philip K. Dick

Photoshop CS6 crashes all the time and especially when using the type tool... please help!

Photoshop CS6 crashes all the time and especially when using the type tool... please help!

Since I did not have this problem with CS5 or CS4, I can only assume something is not right with Photoshop CS6... below is my video card info:
ATI Radeon HD 4850:
Chipset Model:          ATI Radeon HD 4850
Type:          GPU
Bus:          PCIe
PCIe Lane Width:          x16
VRAM (Total):          512 MB
Vendor:          ATI (0x1002)
Device ID:          0x944a
Revision ID:          0x0000
ROM Revision:          113-B9110C-425
EFI Driver Version:          01.00.383
Displays:
iMac:
Resolution:          2560 x 1440
Pixel Depth:          32-Bit Color (ARGB8888)
Main Display:          Yes
Mirror:          Off
Online:          Yes
Built-In:          Yes
Connection Type:          DisplayPort
Cinema HD:
Resolution:          1920 x 1200
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:          2A80273WXMN
Mirror:          Off
Online:          Yes
Rotation:          Supported

Using the bone tool with a psd, png, or jpeg

When I import a psd, png, or jpeg file into Flash CS5 and try to use the bone tool, it scrambles the image. It does this if I simply import and BREAK APART the image or if I turn it into a graphic symbol. PLEASE HELP!

Hi,
Are you using AFCS whiteboard or any other AFCS class? If not, then I feel this is not the appropriate forum. I guess you need to ask in flash or other forum for your problem.
Thanks
Hironmay Basu

Using the Bone tool on a jpeg

Hi, I am trying to use the bone tool on a jpeg image I edited in photoshop. When I import it I have to "break-apart" the image to use the bone tool on it and all seems fine. but when the pose is set, the image vanishes during the motion. Any idea what I'm doing wrong?

Before using the bone tool, place your bitmap on the stage and F8 (or Modify>Convert to Symbol) to convert to movie clip, button, or graphic. You can then use the IK tools on that symbol. If you are simply "Breaking Apart" the image, Flash turns it into a vector square with a bitmap fill. If that bitmap has transparency, once you manipulate the IK armiture, the bitmap will "disappear" either all together or by the defining edges of the vector shape. Raw vectors and symbols do not mix with the IK tools, only one or the other.
Bitmaps do not link with the IK tools directly.

Problems using the bone tool, CS4?

Okay so I have spent countless hours trying to figure this out. I want to use the bone tool to make a leg animation. First I create a new symbol called Leg. I double click the Leg in the library which opens it in leg window. Then I grab the circle tool in the tool bar and make the thigh. Then I make another circle for the leg. Now the problem is when I click the bone tool to connect them, it won't let me connect the thigh with the leg! Can somebody tell me why this is happening? (This is all done on one layer).
However when I click the circle tool and then click object drawing tool in the bottom of the tool bar I then can connect both the thigh and the leg with the bone tool. Problem is when I use this feature if I want to move the shapes to revise it a little they wont seperate. The thigh is stuck to the leg.
Some please please help me.. this is making me angry!
I want to be able to draw a leg with a couple shapes and be able to connect the bone tool to one shape to the other. Thanks Rossi

Following article covers how to add bones to Symbols:
http://help.adobe.com/en_US/flash/cs/using/WS14DAFDB4-B9AD-4080-A29F-022128CCFD39.html

Adobe Photoshop CS4/5 Crashes when using the Move Tool

Hello. I'm here because I'm having an issue with Photoshop.
I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
The error code, from Event Viewer:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x65637275
Faulting process id: 0xe28
Faulting application start time: 0x01cb2bb3471d87bf
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: unknown
Report Id: b412e368-97ab-11df-8f49-001d60b646ef
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-07-25T05:15:57.000000000Z
EventRecordID
78845
Channel
Application
Computer
Gatherum
Security
EventData
Photoshop.exe
11.0.2.0
4bf2d4f6
unknown
0.0.0.0
00000000
c0000005
65637275
e28
01cb2bb3471d87bf
C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
unknown
b412e368-97ab-11df-8f49-001d60b646ef
Details in XML View:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
<EventRecordID>78845</EventRecordID>
<Channel>Application</Channel>
<Computer>Gatherum</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>65637275</Data>
<Data>e28</Data>
<Data>01cb2bb3471d87bf</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>unknown</Data>
<Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
</EventData>
</Event>
System Specifications:
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
System Manufacturer: HP-Pavilion
System Model: GN697AA-ABA a6214x
Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
Memory: 2048MB RAM
DirectX Version: DirectX 11
Display Device:
Name: NVIDIA GeForce 8600 GTS
Manufacturer: NVIDIA
DAC Type: Integrated RAMDAC
Approx. Total Memory: 1010 MB
Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
Photoshop Version: CS4 Extended 11.0.2

Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process. That said, with a little research and care you can do it. Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
First, you'll need to know what your operating system capacity is. For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in. What version of Windows are you running?
Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches. There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
http://www.kingston.com/
It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade. Every computer is different.
If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
-Noel

Can you merge two user accounts on macbook? my wife has created a user on her new macbook , then inadvertently created a second one when using the migration tool. 1st ac has her office 365 install, yet 2nd has her itunes database, docs and contacts.

Can you merge two user accounts on a macbook? my wife has created a new user on her new macbook air then, inadvertently, created a second one when using the migration tool. 1st a/c has her office 365 install, while 2nd has her itunes database, docs and contacts. What is the best way forward to get everything into the one account? Not sure if the office 365 will allow another installation into the second account, otherwise would just do that and delete the first, if that is possible?

There is no merge but you can move data from one account to another via the Shared folder. Data is copied from Shared. Watch your free space when copying. These are large files. Do one at a time if you are on a small drive. After making copy, delete from other users before you start next copy.
Office365 installs in the main Applications folder and is available for all users on the computer. Activation is tied to the drive not the User.

Adobe flash CS6 crashes when using the type tool or Editing word all the time... please help!

Adobe flash CS6 crashes when using the type tool or Editing word all the time... please help!

Nobody can tell you anything without proper system info or other technical details. The standard answer with all text issues simply is, that you have a "bad font" on your system and need to get rid of it.
Mylenium

Photoshop CS6 shuts downs when using the move tool

Photoshop CS6 shuts downs when using the move tool. It seemas to run fine until i try and use the move tool. PS worked fine just a few weeks ago and now it has this issue. What can i do to resole this issue?
Thnaks,
System Specs
Windows XP Home SP3
AMD Atholon 64 X2 Dual
2GB RAM
Video Cards
Radeon 7200
NVIDIA GeForce 8400GS

Two displays are OK on one adapter, Two displays adapters are not OK. http://helpx.adobe.com/photoshop/kb/gpu-opengl-support-photoshop-cs4.html
7. If you are using more than one video adapter, remove the additional cards.
Multiple video adapters can cause problems when OpenGL and Photoshop use the GPU. It's best to connect two (or more) monitors into one video adapter. If you have to use more than one video adapter, make sure that they are the same make and model. Also make sure that they both support the same versions of OpenGL and Shader Model. Otherwise, crashes and other problems can occur in Photoshop.
Note: Using two video adapters does not enhance Photoshop's performance.

When using the measure tool the imputed scale resets to 1to1 as soon as you perform another action. How do you get the scale to lock?

When using the measure tool the imputed scale resets to 1to1 as soon as you perform another action. How do you get the scale to lock?

Hi there - I think I am having problems associated withg Cause 9 in that in google mail I have another pop email address associated so that I can send using this email address, but then I have both addresses setup seperately in BIS. When I receive a mail from GMAIL I receive a duplicate with "received by: unknown" in the header. I had gmail setup so that it would send using by pop email address as default.
In your answer the settings for the two filters you recommend creating are broken links and I canot actually see them. What are they?
Also What do you recommend setup wise with gmail and a pop account. Some people say it is better to get gmail to receive the pop mail account and run the whole account from there. Blackberry doesn't seem to like this setup very much. Should I completely dissociate the pop account and to try and clarify the distinction between the two? Or should I setup a second gmail account and have that poll my pop account and then have the blackberry feed off these two gmail accounts? The reason I am considering this option is gmail provides a lot of storage and online continuity and this would effectively persist my account.
Your help would be much appreciated.. I have had blackberry woes now for over a month and I have spent hours with various support personel, tried deleteing and sending down new service books etc etc but had no luck yet.
thanks,
Nathan

Color changes when using the bone tool

Similar Messages

Maybe you are looking for