Color changes when using Vignette and Levels...

Its most promenant with reds, but when I am editing a RAW image and click Vignette, my reds turn orange-ish.  I noticed this with Levels as well.  Even after I click the reset arrow but leave the Levels box checked, the reds are still orange.  This happens on different images as well.  Any thoughts...?  Thanks.  mike.

Hi. I currently use Canon, and i only see it in my RAW files.  All camera firmware is up-to-date. I am running latest version of Aperture, but still running 10.6.8. I went through a bunch of old photos where there was a good red color of something and i was able to duplicate the problem each time. Where there was a large area of red, it was VERY noticable. Also, I used to shoot with Nikon and my NEF files do the same thing where there is a nice red.  It seems to be an Aperature "thing."
What i find so curious, is that even if I make no adjustments to the Levels sliders, just checking the box alters the color, same with the Vignette brick.  Also, I do color calibrate my monitor. thanks.

Similar Messages

  • Background color changes when using AJAX

    I'm using NetBeans and the plugin Project Dynamic Faces Ajax Components. Each time a radio button is selected a few textfields are hidden/shown.
    But each time I press a radio button, my background color of my JSF page is changed (from blue) back to white.
    Does anyone know how to disable this, or just how I can set the background of the page manualy in the java code.
    I've tried this.setBackground(...); , but it doesn't work.

    Hi. I currently use Canon, and i only see it in my RAW files.  All camera firmware is up-to-date. I am running latest version of Aperture, but still running 10.6.8. I went through a bunch of old photos where there was a good red color of something and i was able to duplicate the problem each time. Where there was a large area of red, it was VERY noticable. Also, I used to shoot with Nikon and my NEF files do the same thing where there is a nice red.  It seems to be an Aperature "thing."
    What i find so curious, is that even if I make no adjustments to the Levels sliders, just checking the box alters the color, same with the Vignette brick.  Also, I do color calibrate my monitor. thanks.

  • Color changes when using the bone tool

    When i'm animating some legs or something like that with the bone tool the leg turns in random frames to black. So between the pose you get flickering black legs, i can select the frame where to leg is black and change it just a bit and then the leg goes back to normal. But when i have to do this with long animations it takes ages. Does anyone recognize this problem? Because ive looked the internets but havent found any solution. Please help
    Frank

    Hi Sirharish,
    Can you try the solution in the forum post Bone tool no white for overlapping?
    Thanks,
    Preran

  • Color space change when using photoshop elements plug in

    When I select photo and edit with photoshop elements, Aperture makes a copy of the file as expected, but I can see the image color/hue etc. has changed, why?  Is there some setting I am missing?  The color of the image shouldn't change, should it? Just doesn't make sense!

    Where do you see the color change of the copy?
    In the thumbnail or preview before it is send to the external edtor?
    When the image is opened in the external editor?
    Or after it is send back from the editor?
    I do not see any color changes when I use PS CS5; it may help to see a screenshot.

  • Why are my colors changing when copy and paste a graphic from docA to docB both in illustrator?

    Both documents in Illustrator CC are RGB and I'm trying to copy a logo onto a template, but the color of the logo completely changes when I copy and paste it into the template. The logo has three different pinks and they turn red when pasted. There is no graphic styling and the logo is all gradient.

    What is weird is that we get a lot of logos from the same company and we put it on shirt templates so they can see size wise on how it would look on shirts. It's happened with other logos, but very slightly. I asked my co-worker who sends me the logos what version she uses and she also uses CC but does not know what version the other company uses. To them, it doesn't matter if the logo colors get altered, they have the PMS colors to work off of for screen printing. I just want to make sure that if another company sends us logos with PMS colors, we will know how to fix it.

  • Look for a progarm that will let me have 2 moniters but one will lock on and will not change when using spaces

    look for a progarm that will let me have 2 moniters but one will lock on and will not change when using spaces

    ok so i have one moniter to the right of me and i want to keep my google chrome on that one but still be abel to use space on the many monter. cuz when you go to spaces it movies both moniter i hope that help and i hope that you can help me.

  • Color change when opening in Reader

    Hi, I created a PDF in Photoshop. I then added an editable field in Acrobat, using the same RGBs. When I open the file in Reader, the color of the editable field does not match. Any suggestions on what I can do to resolve this?  I have the most recent version of Acrobat and Reader.
    Thanks,
    Jackie

    Here is a screen shot of the reader PDF, followed by the original file in Acrobat. You can see that the entire document color changed when I opened it in Reader.
    THanks,
    Jackie

  • Rules applied to multiple cells trigger color changes when any of the cells

    "Rules applied to multiple cells trigger color changes when any of the cells meet the rule’s condition." That's what Help says, but when I follow the directions, it doesn't work. This is in Numbers 08.
    I have a table where the contents of one column are either "YES" or "NO", depending on formulas using variables from other cells. If YES, I want the fill of that cell and that of two adjacent cells to change from white to green. I select all three cells and use conditional format rules for "text contains:" YES, then choose my fill color. When I return to the table and introduce values for the variables that trigger the rule, only the cell in the YES/NO column changes to green; the other two remain white.
    While I am spreadsheet challenged, I usually can follow directions as plain as those in Help, but it's not working. I couldn't find anything in the discussions after an hour of searching. Is this a known problem or am I just stupid?

    For what it's worth, that's the way I read that line in the User Guide as well. What it actually appears to mean, though is 'Rules applied to multiple cells apply independently to each of the cells."
    Here's a workaround for your three adjacent columns. Long, but fairly simple steps.
    Add a second table to the sheet (Table 2).
    Resize the second table to one column wide and as many rows as you want to apply the conditional format to.
    Set the width of the column to the same width as the three columns you want to highlight, and the row height(s) to match the rows.
    Format to table to have NO Header or Footer row or column.
    Use the Wrap Inspector to uncheck "Object causes wrap"
    In the first top cell of Table 2, enter an = sign, then Click on Table 1 in the sidebar, Click on the first cell that will hold YES or NO.
    Fill the formula down the rest of Table 2.
    With all cells in Table 2 selected, use the Cell Format inspector to set the 'text contains yes' rule and the conditional fill colour for these cells.
    Test the conditional formating by introducing values into Table 1.
    Click on Table 1 in the sidebar, then use the Table inspector to set Cell Fill to 'none'.
    Click on Table 2 in the sidebar, then drag that table onto table 1 aligning it to cover the cells in which the conditional formating is to appear.
    When positioned (and still selected), go to the Arrange menu and Send Backward to move Table 2 behind the (transparent) cells in Table 1.
    With Table 2 still selected, click on the Cell Borders color well and set the Opacity of the borders to 0%.
    Click the Text inspector and set the Text colour Opacity for Table 2 to 0%.
    Regards,
    Barry

  • Is it possible to do a GLOBAL color change for both text and graphics in ACrobat XI?

    I used to do this using the Pitstop Pro plugin but now Pitstop is almost $900 and this is the only thing that I would use it for, not worth the investment
    I can change text color by selecting individual text items, but I want to change all of the red text into white text
    I also need to change all of the red graphics into white graphics and I can't figure out how to do that either
    I have a trial version of XI on a Mac and will buy it if it can do what I am trying to do, i.e. global color changes to both text and graphics
    thanks!!

    I have version 6, but it is way out of date, doesn't work on my current system, I downloaded a trial version of the new one, version 12 I think, now I have to decide if I can afford to buy it, it is not cheap!
    oops, sorry, I didn't read your entire message, aargh!
    I'll check with them if I can upgrade from this early version, thanks for the suggestion!
    (edited because I didn't read properly!)

  • Dreamweaver CC generates one of 3 error messages when using find and replace on Win 8.1 64 bit.

    Dreamweaver CC generates one of 3 error messages when using find and replace is used more than twice in succession. "While executing onLoad in bc_afterSave.htm, the following JavaScript error(s) occurred: At line 188 of file C:\Program Files (x86)\Adobe|Adobe DreamweaverCC|Configuration|Shared|BC\JS\bc_sites.js": out of memory"
    or
    While executing runCommand in File_Save.htm, a JavaScript erroroccurred.
    or
    While exciting getDynamicContent inAdressURL.htm, a Javascript erroroccirred.
    Any thoughts - I end up closing DWCC and reopening. Will work for two additional Find and Replace before the error messaged\s popup again.

    bkaufman43 wrote:
    Thanks Jon. I tried all of those solutions before posting. Same problem. It seems that the problem is tied to DWCC. Do not have the problem when using DW6 on Win8.1. When running DWCC on a Win7 pc, we get the same error message. When running DW6 on Win 7, f&c works fine. It seems to be a bug in DWCC. DWCC works flawlessly on our Macs.
    The same steps apply to DWCC, you just need to choose the CC folders rather than the DWCS4-6 versions that the page talks about. The layout of CC's folders hasn't changed from the older versions which is why, I think, Adobe hasn't updated the troubleshooting page as of yet.
    As Nancy mentions, a 38,500 page site is sort of ridiculously large for a static website, that could be part of the problem, but your response quoted above leads me to think you may have tried the troubleshooting steps in the wrong version of the program. Could you confirm that?

  • Is it possible to ignore "Rigid relationships between attributes cannot be changed" when using ProcessUpdate for Dimension?

    As per the title is it possible to ignore "Rigid relationships between attributes cannot be changed" when using ProcessUpdate for Dimension?
    We have a case where very rarely an item might have been miscategorised so the brand is manually changed.  We want this dimension to be rigid to speed up ProcessUpdate.
    We do a ProcessFull each night, so it will get corrected then, but during the hourly updates we would just like to ignore this error if possible?

    Hello,
    The rigid relationship should be defined when the members will not change over time. Here are some threads regarding rigid relationship for your reference, please see:
    Processing OLAP Cube: http://social.technet.microsoft.com/Forums/sqlserver/en-US/17a55593-9543-404e-a579-0a011965585d/processing-olap-cube?forum=sqlanalysisservices
    Flexible and rigid relationship: http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d8f5443-065d-4485-9385-6f0b5fa417da/flexible-and-rigid-relationship?forum=sqlanalysisservices
    If you have any feedback on our support, please click
    here.
    Regards,
    Elvis Long
    TechNet Community Support

  • [svn:fx-4.x] 15119: Menu. popUpMenu textAlign should be start rather than left so it works correctly when using FTEText and direction =rtl.

    Revision: 15119
    Revision: 15119
    Author:   [email protected]
    Date:     2010-03-29 13:49:52 -0700 (Mon, 29 Mar 2010)
    Log Message:
    Menu.popUpMenu textAlign should be start rather than left so it works correctly when using FTEText and direction=rtl.  Also made same change for AccordionHeader, CheckBox and RadioButton just to be safe.
    QE notes:
    Doc notes: None
    Bugs: SDK-26028
    Reviewed By: Kevin
    Tests run: checkintests
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-26028
    Modified Paths:
        flex/sdk/branches/4.x/frameworks/projects/framework/defaults.css

    Thank you so much wchp, this is brilliant. I have had this annoying problem for a long time. I eventually rang Mac support, they did not know how to fix the problem as you have suggested so they instigated many hardware replacements which eventually left my iMac severely crippled. They eventually replaced it with the latest model. But I spent two months working with a disabled computer which really interfere with my work.
    Your solution appears to have solved my problem, at least so far, but I am hopeful that it is a permanent fix. I hope that your suggestions are taken up by Apple support. This may solve many users problems and avoid Apple making expensive fixes that don't actually work.
    I thought that the new iMac would not have the 'Wake up from sleep by painting in the login window' problem but it did, this really annoyed me. Anyway now the problem appears to be solved, it's not I will repost and keep working on it. Thanks again.

  • How do I close a JInternalFrame when using subclasses and a separate cla...

    The heading should be: How do I close a JInternalFrame when using subclasses and a separate class for the actionListener?
    I have just created a JInternalFrame appclication and now I want to structure up my code. I have a Superclass that contains the usual settings for the two JInternalFrame:s, and the two subclasses with frame specific information. Both the JInternalFrames use the same OK button. I want to have the actionListener outside the classes to avoid repetition of code. But the dispose()-function does not work properly, it does not close the opened JInternalFrame. What�s wrong?
    class Superclass extends JFrame
         JButton b= new JButton("ok");    
         Superclass()
    class Subclass1 extends Superclass
         Subclass1 ()
              add(ok);
           ok.addActionListener(new Listener());
    class Subclass2 extends Superclass
         Subclass2 ()
              add(ok);
           ok.addActionListener(new Listener());
    class Listener extends Superclass implements ActionListener
         public void actionPerformed(ActionEvent e)
                   dispose();
    }How do I controll in the Listener class that the button in Subclass1 is beeing pressed?

    First of all I think I misunderstood your question. You said you had two internal frames, so I thought you wanted to close the internal frame.
    It now looks to me like you want to close the entire JFrame, which makes the code even a little easier. Something like:
    JComponent component = (JComponent)event.getSource();
    JFrame frame = (JFrame)SwingUtilities.windowForComponent( component );
    frame.dispose();
    Ok, I will make a try:
    public static Container getAncestorOfClass(Class c, Component comp)
    w.getAncestorOfClass(w, this); Fiirst you need to learn the basics of reading the API.
    "getAncestorOfClass()" is a static method. That means you don't use a variable to invoke the method. You use the class itself.
    "w" is a variable, which is a JFrame, but that is not what the first parameter should be. The first parameter is a "Class".
    "this" will refer to your Listener class, but you need the Component that generated the ActionEvent.
    When I thought you wanted to close an internal frame then the code would have been something like:
    JComponent component = (JComponent)event.getSource();
    Container container = SwingUtilities.getAncesterOfClass( JInternalFrame.class, component );
    JInternalFrame internalFrame = (JInternalFrame)container;
    internalFrame.invokeSomeMethodHere();If you need further help then you need to create a "Short, Self Contained, Compilable and Executable, Example Program (SSCCE)", that demonstrates the incorrect behaviour.
    http://homepage1.nifty.com/algafield/sscce.html

  • My photos are sharp but become soft when used in and IDVD slide show.

    My photos are sharp but become soft when used in and IDVD slide show. How can I prevent this from happining??

    Hi,
    I suggest that you try unchecking both of the crop options - landscape & portrait.
    To re-create your situation, I had to check the crop for landscape pictures option.
    I prefer to have control over any cropping so I tend to crop each image first before creating the slide show.
    Brian

  • TS3742 I have an iMac 24" system. I just recently installed MAC OS X 10.7.4 (Lion) on my system. Since doing so, my system consistently hangs. Particularly when using iMovie and iPhoto.

    I have an iMac 24" system. I just recently installed MAC OS X 10.7.4 (Lion) on my system. Since doing so, my system consistently hangs. Particularly when using iMovie and iPhoto. I have to power off my system to get it running again. Any suggestions on what I can do  to address this situation.

    I would first reset the SMC:
    Shut down and unplug the Mac.
    Keep the Mac unplugged for at least fifteen seconds.
    Plug the Mac back in and do not turn it back on for at least five seconds.
    Press the power button to turn the Mac back on.
    Then I would reset the PRAM by rebooting the iMac while simultaneously holding the Command-Option-P-R keys until the machine restarts a second time.
    Let us know if these  procedures don't solve the problems.
    Hope this helps

Maybe you are looking for