Color Coded 5.1 Outputs h

I want some help trying to decode all those jacks on the back of my sound card. It has the standard IC99 colors i think, It's a SB li've! card that came with my dell.
Pink (mic)
Green (spkr)
Black
Orange
Blue
I know the first two, but what are the last three? I tried google but didnt find the direct info i'm looking for. I have a shelf system and I'm trying to connect the RCA jacks to my computer, but I'm not sure where to hookup the adapter cord. As of right now, it's in the black jack (from what i read, it's the line-out2?) and the sound is real muddy and bass is like non-existent. I don't have a "Creative Toolbar" that I can find, but i went through my hard dri've and found the equilizer and set treble and bass to full maximum (all the way up?), but still no bass (depressing considering I have a 600 watt subwoofer...). All I have is a stereo shelf system and a 600 watt subwoofer (feeds off the system) that I want to connect to the sound card, no rear/side channel or center channel as of yet (although considering I have 0 8 ohm speakers in my closet that work...). I dont watch DVD's very often on my computer (I have a seperate DVD player for that) so a full-on surround system nor rear/side/center speakers are in my plans anytime soon yet to be directly connected to the computer.

Well, I hope I can help, but the way my system is configured, both the center and sub come out of one jack (orange). Digital, however also comes out of that same jack. Make sure that you don't have the digital output turned on or your analog system will not function correctly. Now, on to the speakers. I actually have the Creative speakers to match my sound card. I'm not sure of your speaker configuration, but I'm thinking on most systems that the center and sub will be tied together on one jack. Meaning that, you know how you have two sections on a plug one for Left channel and one for right? Well, since the center and sub are both mono (single channel) each one has it's own section on the plug. Similar to the Left and Right. So what I'm saying is I believe that your sub and center will be tied together and you just take the orange plug and put it into the orange jack, making sure that you don't have digital checked on your computer. I hope this helps, I know it's long, but hopefully you can understand my babble. If it's not how I've described it, I really can't help you because I don't know too much about the schematics of the card. I'm pretty sure it will work though.

Similar Messages

  • Color coded calculated list column in content query web part

    I have a calculated column in a list for displayig color coded values using the link
    http://blog.splibrarian.com/2012/06/06/using-calculated-columns-to-add-color-coding-to-your-sharepoint-lists/
    Now for rollup i am using the lists to display them in a content query web part so i have updated the .webpart file and imported and added, made changes in the item style and uploaded ad finally inserted the web part in the page.
    But while diplaying hte custom column, it is being eing displayed as
    string;#<DIV style='font-weight:bold; font-size:24px; color:green;'>•</DIV>
    As you can notice it has appended string;# before the text. How do i avoid this? Thanks

    <xsl:value-of-select="@RAG" disable-output-escaping=“yes”
    />

  • How do I share a color-coded Outlook calendar with others in my office that they can see the colors too?

    How do I share a color-coded Outlook calendar with others in my office that they can see the colors too?

    Hi,
    How do you color code the calendar items? From conditional formatting or from categories?
    Please make sure the user has been given reviewer or higher calendar permission to view items colors in Outlook. About how to share calendar in Outlook, please refer to:
    http://office.microsoft.com/en-001/outlook-help/share-an-outlook-calendar-with-other-people-HA010354420.aspx
    Regards,
    Winnie Liang
    TechNet Community Support

  • I have messages in mail that are color-coded as if by a rule, but I have no rules set. How can I correct this?

    The only rule that I ever had in Mail was the default one that color coded messages from Apple blue. I notice that some messages are color-coded brown and I have no rules set at al (hence no rule to turn off.)  Some of the messages are related to viewing online magazine, but not all.  How can I stop this?

    Hi. Thanks for your message.
    Well, I understand what you are trying to say but I thought it was easier to categorize in Apple Mail.
    On Entourage I just click twice on a sender address, record it on Address book and give it a colour that I previously defined as "Work", "Personal", "Customers", "Suppliers", "Friends" or whatever.
    As Apple Mail don't have Address Book as part of it but an outside feature it's very annoying. Of course I am used to use a software and I don't expect now Apple Mail do everything as Entourage but... as someone said it seems Apple Mail stopped in time. The recent version seems the first one ever issued. I hate the way Mail.app handles attachments by placing big chunky previews right in my email. I prefer them to be named attachments listed somewhere else, out of the content of my email. I don't if I can change this via terminal commands? Can you tell me if that is possible?
    I don't understand why Apple Mail have lots of plugins instead of a great improvment from the backstage.
    I use Apple computers since ever and I love this machines but sometimes I don't understand this lake of improvments.
    Take a look at this link:
    http://scottworldblog.wordpress.com/2009/10/12/microsoft-entourage-vs-apple-mail /
    Of course I don't agree 100% with him but some things are true...

  • Is there a way to restore the earlier color-coding format?

    If there is a workaround to restore the earlier color-tag format, I would love to know it.
    In the alternative, I've submitted the following to Apple and wanted to share it with the community also, in case there is no workaround and others would like to add their voice in addressing the issue:
    The new single-dot color coding of tags in Mavericks doesn't work for me AT ALL.
    I have been relying on Apple's full-width color coding for quite some time because it could help me easily discern—at a glance—different file versions, project statuses, and other workflow particulars—without having to read the filenames' text.  In other words, it's been a convenient right-brain workflow.
    The key here, of course, is the idea of "easily" and "at a glance."  The new Mavericks color coding both extends and confounds my workflow—I now must do an additional visual search of any given list of files, especially because my filenames are often long (informational) and their middle section (in the column view) is likely truncated to conform to Apple's default narrow column formatting.
    The purpose and point of color coding is to reduce time and complexity and aid organization.  However, the Mavericks version now requires (1) doing a visual scan of an entire column of filenames, instead of a visual "grab" of whole bands of color without any need to read the filenames, (2) locating the color dots at the ends of those column lines and making sure they correlate with the proper text (left-brain/right-brain work instead of just staying right-brain), (3) making a color comparison of extremely small fields of color (tiny dots instead of full-wide bands), and (4) implementing a visual/mental check step to ascertain that that a particular color dot is the correct one. Because of the added confusion of having to do "manual" left-to-right visual placement, it becomes necessary to add the step of expanding the filenames (column widths) to get certainty.
    I'm guessing that at this early point in the Mavericks proliferation you'll likely want to dig your heels in to defend and preserve all the involved and extensive work you did to produce the update, but I strongly urge you to revisit the particular design decision mentioned here.  It makes it tougher for us out here using the program, and it works against your PR efforts:  I'm now less likely to trust your design decisions and will be much less likely to implement future updates or champion them.
    If I could uninstall Mavericks and get my previous version back, just for this one item alone, I would. It's been a mainstay feature for me, and one of the things I've lauded to non-Mac users to encourage them to venture Apple.

    Downgrade Mavericks to Your Previous System
    For Lion or Mountain Lion
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to a Mountain Lion Installer app or USB flash drive installer:
       Partition and Format the hard drive
          1. Select the target volume you wish to use.
          2. Select Disk Utility from the Utilities menu in the menubar.
          3. In Disk Utility select the target volume from the left side list. Click on the
              Partition tab in the Disk Utility main window. Set the Partition Scheme to one
              (1) from the drop down menu. Set the Format type to Mac OS Extended,
              Journaled. Click on the Apply button and wait until the process has completed.
              Quit Disk Utility and return to the main menu. Quit the Main Menu to return to
              the installer.
    Install Lion/Mountain Lion: Select install Lion or Mountain Lion and click on the Install button. .
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    For Snow Leopard or Earlier
    1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
    If you have Snow Leopard Time Machine backups made while on Snow Leopard, then you may do a full system restore per #14 in Time Machine - Frequently Asked Questions.  If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion/Mountain Lion files.

  • Navigation and Color Coding

    Hello Guys,
    I have got couple of design questions.
    1. I have a report with a view selector on it(Annual, quarter, month) that navigates to another report with the same view selector(annual quarter month) The problem I have is with the navigation landing pages.
    When i changed my report to quarter view from the annual view and then navigate to the report B I still land in ANNUAL view as that is the first view of the report. Users expect to land on quarter view directly based on what they select on the report A.
    So i was wondering if there is a way to control the view selector and column selector landing pages when navigation from report A to report B.
    2. This is regarding Color coding. I have three columns in my report Year, quarter, month with conditional color coding done on it(when year=09 then red, when month =jan then blue some thing like that). So now the report has both table and pivot view. The users want to see the color coding only on pivot but not on table. Is there a way to achieve that? I tried duplicating the columns and hiding in the table but hiding in the table will hide across all the views. So i am kind of stuck there as well.
    Can we control this?
    Any advice is appreciated
    thanks
    Prash

    Regarding 2) don't know how feasible this is since I can't see your report, but you can try this:
    1) For the columns that you want color-coded, put two instances in your Criteria mode. Now color code one each of those "dual columns" for your pivot table.
    2) For the "Table View" build another pivot table, but design it like a table, but this time using the "uncolor-coded" columns in that pivot table and keeping the other columns in the Excluded box.

  • Calendar App: color coded events...

    Hello,
    Like most folks I have a number of calendars - home, personal projects, work, etc. Each is handily color coded in Calendar, which is great. So far, so good.
    However, in my *single* work calendar (which is served from a company account on Google so pulling in from my company Google Calendar account) I have multiple types of things going on: internal work and then differet clients work. To make sense of my work world I really need to color code my different clients and my company internal work.
    So the outcome I am looking for is to be able to color code locally on my MBP different events sourced from the same Google calendar.
    I can't see how to do this in Calendar (I'm on OSX 10.8.2 and Calendar 6.0 (1645)) and so far I haven't found a third party app that will do it either.
    Please can any one in the community advise:
    1. If this is possible how I achieve it (e.g. could I create several calendars locally all of which somehow aggregate up into my single Google work calendar so that my colleagues and clients can see a full and true pictue of availability at the Google level while I have segregated/color coded view of items locally on my MBP)?
    2. If this isn't possible in native Calendar app on OSX are there any apps out there that will allow this?
    Am I really the only person with this need? I can't believe so and I'm sure someone must have solved this issue already...
    Many thanks for your time and consideration of my issue.
    Regards,
    Richard

    It sounds like something that you should be able to do with AppleScript, but alas I'm not proficient enough to tell you how to do it. There used to be an Applescript guru that was a regular on here (Yvan), but I'm not sure if he's still active in the community.
    You could try searching google for applescripts related to calendar or iCal (its still called iCal in AppleScript's dictionaries list even on Mountain Lion) or try asking for help on MacScripter.

  • Styles (nested?) in Long Document with Color Coded Sections

    Hi, I am looking for a solid style set-up for a document with seven color coded sections. The character, paragraph, table styles, etc. will be used throughout the book, but several of them (chapter headers, bold color, table strokes) will shift colors from section to section. What is the best way to set this up so I can still make other changes to the styles without having to edit each colored section separately.
    Thanks in advance,
    Marshall

    In practice, I'm having rouble making this work.
    I have one swatched, named "Section Color" and if I change the definition or CMYK recipie of that color it will ripple instantly through the styles( as you said,) I have swatches unchecked from the Syncronize Options, but upon syncing it still rewrites that CMYK recipie back to the style source's and all colors ripple back.
    It's not hard to reset one color for each section, but id like to know why it's changing swatches with swatches unchecked. Is it writing that color from the paragraph or other styles which ARE set to sync?

  • Color coding attribute ( IEEE 1394 )

    Hello,
    What is teh correspondance between the value out after a get attributes with attribute input set to "color coding" and the image type? I have only a monochrome camera so I can see that color coding=1 is for 8 bits images but what stands for RGB, HSL,16 bits images etc etc ?
    Thank you for your answer !

    Hello,
    from niimaq1394.h:
    IMG1394_COLORID_DEFAULT,
    IMG1394_COLORID_MONO8,
    IMG1394_COLORID_YUV411,
    IMG1394_COLORID_YUV422,
    IMG1394_COLORID_YUV444,
    IMG1394_COLORID_RGB8,
    IMG1394_COLORID_MONO16,
    IMG1394_COLORID_RGB16,
    IMG1394_COLORID_RGB32,
    IMG1394_COLORID_RGB48
    In C language, you need to compare the return value to this constances.
    In LabVIEW, use Imaq1394Attribute.vi with "color coding" attribut.
    Hope this help.
    Isabelle
    Ingénieur d'applications
    National Instruments France

  • CSS WON'T GET COLOR CODED UNLESS THE FILE IS IN A PROJECT?? R U KIDDIN??

    If I open a CSS file outside of a project, there is no color coding! Please tell me this can be changed. I DO NOT WANT CFBUILDER ORGANIZING MY PROJECTS!
    $299 for this? Really - please explain why I should pay $300 for a bloated version of Homesite?  Homesite was GREAT!  You guys frakked up by killing it.  CFB is confusing, the settings especially, nothing does what it states. Spend too much time trying to figure out how to update a simple thing.  Bad when I have to Google when I just want to display line numbers.  Typical Adobe - non-intuitive.

    Stop shouting.  Jesus.
    What you're whining about is the equivalent of my mum (who is a lovely little old lady in her late 70s) buying a new VHS and having a tanty of the buttons not being in "the right place".
    If you struggle so much with a software app having settings in different places that it yields this sort of response - and not even an inital visceral response, but lingering enough for you to put the caps lock on and write it down! - you're in the wrong industry, mate.  We're not talking rocket surgery here.  Or even brain science.
    That's not to say that shifting from something like HS to Eclipse doesn't involve a bit of a mindshift, but it's not the end of the world.  And no-one's making you change text editors either.
    Personally I think CFS was a really good text editor, and I rued moving onto DW (not my choice, I was the guinea pig for a failed experiment at a job I had years ago), and when I moved from DW to Eclipse I spend a few moments going "what's all this project sh!t?".  But then I realised everything I work on actually is a project, and there's no harm in having a little organisation in my work. And the work of the rest of the team.  And whilst I found Eclipse has some quirks I could do without, I also remember CFS had some quirks I could do without (and DW was an app I could simply do without from start it finish), so they're even in that regard.  But I also found that Eclipse's inifintitely customisable platform is a real boon for my development across various languages and productivity tools.  Eclipse really is far far better than CFS when one looks at the bigger picture: the one that is outside the realms of developing just basic websites, by one's self, on a single server (and that's not Adobe's target market with CF & CFB anyway, I think).
    That said:  CFB has a way to go (and is ot worth $300: it's just a Eclipse plug-in after all), but being built on Eclipse is a good start.
    I look fwd to CFB 2.0 to see if it's worth buying...
    Adam

  • Color Coding a status report

    Hi All,
    Is there a way in web dynpro to color code some values retrieved from a RFC call?
    For example, say I have a BAPI that returns a status code in a table structure in the form of a character.
    'R' - Red, 'Y' - yellow and 'G' -Green. In the web dynpro I loop thru the table to find out how many red, green and yellows have been returned, eg. R = 3, Y = 5 and G = 9.
    Can I then show like a color coded progress bar with the actual colors in web dynpro?
    Like so, RRRYYYYYGGGGGGGGG, with the letters being the actual colors? Can this be done?
    Any suggestions will be greatly welcomed. It doesn't have to be exactly like above.
    Thanks
    TM

    Hi Tony,
    I'm new, so feel free to use my approach or not.. =)
    I'd first, define three Context Attributes, Red, Yellow, Green (These will reffers to amounts).
    You can even, do the sum once, using an Action. You would need to iterate over your table, accessing the Fields and counting by yourself, like:
    if ("RED".equals(modelProperty))
      red++
    if ("YELLOW".equals(modelProperty))
    You can also use a switch case if you preffer. You will have the amount of each element in your Value Attributes at that time.
    You can define another three Attributes, RedWidth, YellowWidth, GreenWidth, they will be calculated and return type string.
    These calculated attributes will:
      - Access each value Node, for its color;
      - Multiply that guy for any other number you want (to increase width);
      - Return Width + px to View
    In the View, declare some Images, Red, Yellow, Green colors. I think you can do a 1px image and just resize on the property in runtime. You can define the height in Web Dynpro Layout, no worries. Put them all in a line, with no spaces between each other.. it should look like a bar I think. Remember that we can't manipulate HTML / JS in Web Dynpro (not at least NW04s I think) - so, don't expect some fancy fancy stuff.. =)
    Whenever you change the Node (which you put your calculated attributes in) it will update the values, and return new widths.
    The second way to do this is, instead of calculating the value in an Action, calculate the value directly in the Calculated Attribute, (iterating thru the main model node, for each respective color) - It will be a bit slowly, however, less nodes are required. You can probably choose what's best for you.
    The code itself shouldn't be that hard. Tell me if you need any more information on how to do the stuff.
    Regards,
    Daniel
    Edited by: Daniel Ruiz on Mar 23, 2009 11:44 PM
    Edited by: Daniel Ruiz on Mar 23, 2009 11:47 PM

  • Color Coding in PHP/MySQL model: INC file

    Dreamweaver 8.02 on Vista RTM (wouldn't matter I don't
    think).
    I have a site I was using DWMX to manage previously and at
    that time I got into one of the XML or TXT files associated with DW
    and changed it so it would reckonize .INC as a valid file and
    therefore give me some color-coding, code suggestions as I am
    typing etc.
    On DW8 I see similiar XML/TXT files (for DW config) and now
    INC files are all over the place... so I am thinking it should
    reckonize this file types.
    Still though, the color coding (and the ability to use the
    menus to insert img's, etc) are greyed out.
    Any ideas?
    A typical inc
    <div>
    html
    html
    html
    </div>
    nothing hardcore.
    Any ideas? Macromedia/Adobe help online wasn't much help and
    my searching on the forums isnt bringing up anything.
    Thanks
    Sean

    quote:
    Originally posted by:
    Newsgroup User
    SeanCotter wrote:
    > I don't know how big of an issue this is, but INC is a
    popular as an include
    > ext for PHP and I imagine people will be rolling to
    Vista as they get new
    > machines. Hopefully this can help someone.
    The .inc filename extension is popular, but it's also
    insecure unless
    the include files are stored outside the server root. Web
    servers have
    no idea of the correct MIME type for an .inc file, so they
    just serve
    them up as plain text if a direct request is sent to the
    server. This
    risks exposing sensitive information, such as database
    passwords.
    It's far safer to use the combination .inc.php. The server
    sees the .php
    filename extension and parses any code as PHP. The .inc
    reminds you that
    it's an include file.
    David Powers, Adobe Community Expert
    Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/
    Thanks for the tip David.
    That might have been a solution from the begining but I was
    going off what I was reading in some PHP books and looking at
    samples, etc. I am running PHP5 on IIS6 and its been fine for a
    year, I just tried what you mentioned, to treverse directly to the
    includes (and I know where they are...) and IIS doesn't give them
    up. If you have a method to try let me know I would be interested
    in seeing... though honestly, in the case of the website at hand,
    minus one dynamic section what is in the INC is what people see by
    viewing source on thier browser and in case of the dynamic pages
    (google maps mashup) they can have it ;) if it helps them with
    thier site... let me know if there is a way to test that security.
    Thanks
    S

  • Coping Color Coded Text from PLSQL Editor

    Does anyone know a way to capture the color coded text from the Reports PLSQL editor so it can be pasted into MS Word? A normal copy and paste does not copy the color and I would like the color coded text as part of the report documentation.
    Thanks

    The correct subject is:
    Copying Color Coded Text from PLSQL Editor

  • Color coding of calendar in Sharepoint 2010

    Hi All,
    I have requirement where i need to add new metadata and to use the new metadata column in the calendar for color coding. Please suggest how i can do this?
    Thanks.

    Hi,
    According to your post, my understanding is that you want to color coding of calendar in SharePoint 2010
    To get this done efficiently, SharePoint’s built-in calendar overlays are the way to go.
    You can follow the steps as below:
    Customize category column in the calendar list
    Create views filtered by category column
    Create blank view where the category filters for NULL value
    Add the calendar overlays
    For more information, you can refer to:
    Four Easy Steps to Customized Color Code Calendars in SharePoint
    Color-Code Events on a SharePoint Calendar
    In addition, you can use code to achieve what you want. Please refer to:
    Customize Calendar colors wihtout Code or
    with code ein SharePoint 2010
    SharePoint 2010: Color Coded Calendars
    Thanks,
    Linda Li                
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • My Color Coded Calendar Events Are Not Shown

    My Color Coded Calendar Events are not displayed on my iphone. The events sync fine but they don't have the appearance that Outlook 2003 has. Dots on a calendar don't do me much good. What am I missing?

    Thanks for the reply. I was thinking that I saw in the "Intro to the new iphone" thing here on the apple site that this thing displayed the Label Color of my events. But no, I just watched it again and saw that it shows the different calendars I have in different colors. I'm very bummed (at myself for misunderstanding it). This is my first ianything so I'm not very familiar with apple. Is there somewhere that I can place an enhancement request?

Maybe you are looking for

  • How to change title for podcast on iweb

    I am getting the error that my podcast has already been submited to itunes but it hasn't. I sent itunes support an email and they said to change the title of the RSS. Can anyone tell me how to do that in iweb for the podcast?

  • Typewriter properties in Acrobat 9.0

    Is there a way to change the (default) properties of typewriter?  Also, is there a way to change the font size just once in a document?  Everytime I change to a new block of text, the text size goes back to the original size. Thanks, Bryant

  • How do I save a Quicktime MP3 that I have downloaded in a Safari browser?

    My friend has uploaded a new mix cd in mp3 format onto his website as a link. When I click on the link it opens in Safari and starts to playback in a quicktime window. Once the download is complete, how do I save this to my hard disk?

  • ALE of Vendor

    Hello, I have added new field in ALE configuration of Vendor ( BD53) in one system, but when i tried ALE this field, it is not getting ALEd to the other connected system. Can someone help if any configuration is missing. -Chetan

  • Opening an iMovie project

    I've created an iMovie project which I have succesfully (after a lot of trouble...) imported in iDVD and after creating an image file burned on DVD. The result is great but... Suddenly I can't open my original movie project anymore? iMovie opens but