Color Consistency between Hardbacked book and soft backed book

I developed, uploaded and received several hard backed books (8.5 x 11) via Aperture 2 and was very impressed with the results. Later, I decided to use the same files to print some additional soft backed books of the same seize and I was really disappointed at the color reproduction on those. No changes to the files between the two orders.
Earl

Kenneth,
this is hardly an observable difference:
"RGB 243/203/70 in his original,RGB 243/203/71 in mine"
Downsampling should be switched off (instead of placing
by size 100% and using the old ppi value, that's just an
unnecessary complication).
The text by PhS was probably part of the raster image.
In such a case avoid any JPEG compression (e-book),
because this will change almost all colors just a little
even in large areas. Raster text will be garbled (your
observation).
"No Color Conversion and under Profile Inclusion Policy
I set Don't Include Profiles"
This is IMO correct for a reproduction, whatever
ingredients might be in the original page or in the PDF.
The only remaining sources for a color shift - visible
by comparing the two versions under the same test con-
ditions - are downsampling and JPEG compression, IMO.
Note: the question is not whether the two versions are
correct, but whether they are identical.
Best regards --Gernot Hoffmann

Similar Messages

How do I close a book and go back to the library?

How do I close a book and go back to the
Iibrary?

Tap on the open page somewhere and the "library" Button should appear in the upper left corner. Tap that to go back to the library.

Color difference between placed PDF and original PDF

I'm kind of out of my league on color issues.
A client asked for a book to be supplied as a PDF eBook. He wants me to
add back and front covers to the B&W book interior and give him the
whole thing as a PDF. He supplied 6x9 PDFs of the book's front and back
covers. I Placed them at the top and bottom of my 6x9 Indesign file, and
then Exported PDF. Under Output, I set Color Conversion: No Color
Conversion and under Profile Inclusion Policy, I set Don't Include Profiles.
He's telling me that if he prints the original front or back cover PDF
and then prints the front or back cover from the eBook PDF he sees
different colors, he used the words "lighter" and "hazy".
When I open his front cover and the front cover from my PDF in
Photoshop, I can find color differences. For instance, under high
magnification type is consistently RGB 243/203/70 in his cover, but in
mine, type shows as a range of different yellows with a few flecks of
light green thrown in. His PDF is saved directly from Photoshop CS3.
Mine has, obviously, been through Indesign, but I can open it at the
same resolution and color mode in Photoshop.
What should I be doing to preserve his colors exactly?
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

Kenneth,
this is hardly an observable difference:
"RGB 243/203/70 in his original,RGB 243/203/71 in mine"
Downsampling should be switched off (instead of placing
by size 100% and using the old ppi value, that's just an
unnecessary complication).
The text by PhS was probably part of the raster image.
In such a case avoid any JPEG compression (e-book),
because this will change almost all colors just a little
even in large areas. Raster text will be garbled (your
observation).
"No Color Conversion and under Profile Inclusion Policy
I set Don't Include Profiles"
This is IMO correct for a reproduction, whatever
ingredients might be in the original page or in the PDF.
The only remaining sources for a color shift - visible
by comparing the two versions under the same test con-
ditions - are downsampling and JPEG compression, IMO.
Note: the question is not whether the two versions are
correct, but whether they are identical.
Best regards --Gernot Hoffmann

How do i restore synching between Treo 650 and iCal & Address Book

prior to installing 10.4.7, i was able to sync my treo 650 with iCal and Address Book; iCal and Address Book syncs with .Mac and Entourage; Entourage syncs with Outlook on my office pc; and Outlook syncs with my Blackberry 8700. therefore, all i needed to do was enter an appointment or a contact in one device, and all the three other devices would be in sync.
i recently upgraded to 10.4.7 and now, i have problems synching: (1) iCal and Address Book can no longer sync with my treo 650, and (2) iCal and Address Book can't sync with Entourage either.
after installing 10.4.7, i noticed that my treo 650 cant sync with iCal and Address Book. i always get the error "isync conduit synchronization failed. ( the first time it happened, i checked isync, and i noticed that "enable palm os synching" was unchecked, so i enabled palm os synching. after that, i was able to sync my palm, but for one time only. after that, i couldnt sync anymore.)
at the same time, i noticed that iCal and Address Book wouldnt sync with Entourage anymore.
i also noticed that iCal starts-up even if i dont activate it. when iCal starts-up, the beach ball spins for around two minutes before it responds; if i click an entry to edit it, the beach ball would likewise spin for a minute or two before i can edit it. i went through all the entries and noticed that some have multiple alarm entries: i deleted these and iCal no longer slows down.
however, whenever i launch Entourage or iSync, iCal also launches. unfortunately, no synchronization takes place.
can somebody help? how do i restore synching between my treo 650 and iCal & Address Book? how do i restore synching with Entourage? thanks.

Bon asis,
I have the exact same situation. Sorry this doesn't help, but wanted you to know that someone else is in the same exact boat.
Jim

Color variations between AI CS2 and Photoshop

I'm new here and really don't know technical terms for what I'm trying to explain, so please forgive the gibberish. I have an Illustrator CS2 file that someone is printing for me using Photoshop. When he opens the file the colors I selected in Illustrator all change slightly and look much duller when printed.
Is there a way to maintain color accuracy between the two applications? If so, how would I go about changing the colors in my existing artwork? Thank you!

Thank you for all your feedback.
Here are the scopes. All I'm doing to get the change is sending it to AE. No changes elsewhere. Just that simple send to AE and it starts playing with the colours.
I have also noticed that when I reload my projects a lot of the time I have to re-render the entire film. I did update the Adobe software when it became available.

Color issues between photoshop files and PDF's

i create a lot of PDF's from photoshop photographic files in order to email to clients for review. when i look at the PDF's, the colors look flat and dull and dark compared to the original photoshop files (I'm using CS3 and Acrobat Professional 8.0). I have the color space settings the same in both (ProPhoto RGB). I usually do the "save as smallest file size" so the PDF is emailable (there are often many pages, created from photoshop contact sheets). There is no option in Bridge to synchronize the color settings between the creative suites because i don't have all the suite applications. i've tried saving the PDF with the "PDF/X-3" option, but that doesn't seem to work either. is there something i'm missing?

Yeah - don't do that!
I would recommend you check with the Photoshop support area for more details...
Leonard

Color consistency between applications

When specifying colors, Pantone colors within InDesign and Illustrator translate pretty consistently into CMYK and RGB values. But, the same Pantone colors produce wildly different CMYK and RGB values within Photoshop. I have found that Photoshop's CMYK values are often impractical from a printing point of view, so have always ignored them and used those produced in InDesign or Illustrator. What is best for RBG? I would assume Photoshop since it is more focused on on-screen work? Why are these color values not consistent accross CS applications? Seems wrong.
Would love any thoughts on others experience on this matter.

I'm not an expert by any means, but I've found color shifts when outputting to web friendly formats. The media player itself may also be an issue. For example, when I output h.264 via AME, I often can get slight shifts in output color as a result. I don't normally find this problem, when I output to more robust, editing type codecs such as P2, XDCAM, etc.
Also, Quicktime has known issues about gamma shifts, so if you happen to be playing via that, this could also be a part of your problem.
Try outputting the same files as a P2 and see what it looks like.
Hope this helps,
Dennis

Color shift between Develop Module and other modules in Lr 5.7.1

Hello,
I'm getting a color shift between the devolop module and any other module in Lr.
It's a recent problem that I've been experiencing since the last update.
I'm using Lr as part of the Adobe Photographers Bundle in a Windows 8.1 pro.
Below I have an example for the kind of color shift i'm seeing. The image on the left is from the Devolop Mobule and the one on the right is form the Library Module.
Is this happening to any one else? Does any one know why?
I would appreciate any help.

Gautam is correct in that the preview mechanism isn't the same in Develop and the other modules and, you must view the color in Develop at 1:1 to see an accurate preview. The color space is different that's probably why you see this difference in reds (especially if you use a wide gamut display).
IF you build your own ICC profiles for your display, be sure the software is not building a V4 (version 4) profile, stick with V2.
As for exporting and comparing, be sure the secondary application is color managed! Otherwise it's expected that there is a visual disconnect between LR and that app.

Color changes between Safari 3x and 4x

Does anyone have any info about color handling changes in 4.0.2?
I have a friend who upgraded from Safari 3x to Safari 4.0.2 and now the color is off on all her web pages. All the color on all parts of the page are desaturated. It certainly looks like a color profile problem but I can't seem to find any info about what might have changed between Safari 3x and 4.0.2.
I put an old copy of Safari on her machine, it is 2.0.4, and the colors are completely normal in it.
The machine in question is a macbook running 10.4.11.
Thank you.

I have the same problem!!
Apple has apparently decided that unless a color profile is assigned, it will make images in its new browser look like garbage. Meanwhile they still look great on Firefox.
I'm an artist and this is terrible. It means that to please Apple, I need to go resave and reupload all my images with an sRGB profile assigned.
In Firefox, the images look identical to how they were saved originally in Photoshop, without a profile. Yet they look washed out and terrible in Safari.
Gee, thanks Apple!!

HT4437 I just bought an Apple TV. I fail to establish a connection between Apple TV and my Mac Book Pro. The first time I tried Mac Book had Leopard as an operating system. I could at least see the Apple TV Screen. I updated my OS to Lion but now no coo

I have problems pairing my Apple TV with my Mac and Iphone 4s. There was some connection between MAC and the App.TV when my operating system was LEOPARD. I now have OS Lion and there is no connection. I also could not find the AirPlay icon on the my Iphone. What do I do? Any recommendations?

Hi shldr2thewheel,
it has been a while since we have last spoke, I would like to let you know, I am still working on getting used to the switch from windows to a Mac/Apple system. I do have a new question for you, I did purchase In Design CS5.5 through journeyed.com through Cuyahoga Community College of which I attend as a student, is there a way to purchase an online book through iTunes to learn that as well? Also, you know me, the struggling student, I would also, when and if the book can be purchased through the iTunes, would need to know if you do know of a much easier book for struggling students like myself and at a reasonable price as well for the In Design CS5.5 program. Our campus bookstore had closed early, and, so did the colleges library and our local library here where I do live, so, I cannot go to either place to purchase a book or to take out a book, plus cash funds are low at this moment as well but, I do have money left on the iTunes account to use, if it can be used. So, can it be used, the iTunes money, towards finding a low priced online book? I am in great need of assistance as I have a project due for my one course for this Tuesday, September 4, 2012.
Sincerely in need of help once again,
Kim

JPEG color difference between Adobe Raw and Microsoft Image Viewer

When I calibrate my monitor or use the monitors ICC file which came with the Monitor, there is a color difference between Camera Raw image and the JPEG I save from Camera Raw, displayed in Microsoft Image Viewer.
However, if I make my ICC file for the system to be SRGB Color Space Profile, and go through the same conversion, the JPEG image created and viewed in Microsoft Image viewer is identical to the one seen in Camera Raw.
It appears therefore, that the operating system only uses SRGB Color Space profile for Microsoft Imaging Viewer?
Most people I give photos to, do in fact look at them in microsoft viewer.
How can I use the ICC profile for my calibrated monitor and end up with the same results in terms of color with Camera Raw and Microsoft image and Fax Viewer.

All profiles are not created equal. There's a basic version issue (ICC v4 vs. earlier), and profiles are complex things containing many fields. Lots of things can go wrong in the creation of a proper color transform from the combination of the document and device profiles, and it kind of depends on what color management code the software uses whether it can be done properly. Adobe has their own - the Adobe Color Engine - and there are others such as LittleCMS or even Microsoft's system-provided ICM that application designers may be using in their code.
It may be that the profile your calibrator/profiler has produced for your monitor (or other device) isn't compatible with every application. It happens.
This isn't intended to provide a solution or workaround, just to help explain things a bit.
-Noel

Very different color noise between develop module and library

There is a marked difference in the appearance of an image when viewed in the library versus the develop module. The color noise in the library module is very bad, while in the develop module, the noise reduction is doing a pretty good job. This is strictly a view problem, because if I export from the library, the proper color noise reduction is applied and it appears as it does in the develop module. This is not the first time that I have found this problem between the two modules. Any idea why this is happening? And, is there a fix in the works? It makes it hard to view images in the library.
If I boost the color noise reduction up to 100, the library image starts to look ok, but that doesn't account for the huge difference at lower settings.
There is also a dramatic slow down in the develop module when trying to make any of these changes in noise reduction and more, and also in side-by-side when trying to scroll around in the image to compare areas. Things really crawl. There is a definite two or three second delay before things respond. I have 8gigs in this mac pro, which worked beautifully with LR 3.6

And, is there a fix in the works?
Try rendering 1:1 previews for noisy images.

18 sec silent between dialing digits and ring back tone

We have VoIP setup that connect branch offices through the head office PBX .(calls cross the E1 link twice that connect 3662 & PBX).
When call progress between two 1751 2V, there is a 18 second silent between dialing digits and getting ring back tone.
This seems not to be happened between 1750 2v.
Can anybody give me a suggestion to decrease this delay or add some tone to this silent period?
Thanks

debug for 1751 part 1
*Mar 1 00:04:20.935: cc_api_call_setup_ind (vdbPtr=0x819546C8, callInfo={called=,called_oct3=0x81,calling=,calling_oct3=0x0,calling_oct3a=0x0,calling_xlated=false,subscriber_type_str=RegularLine,fdest=0,peer_tag=1, prog_ind=3,callingIE_present 0},callID=0x81918E30)
*Mar 1 00:04:20.935: cc_api_call_setup_ind calling number is null, answer addr dest pattern 6030 e164_ans_addr 0 e164_dest_pattern 1
*Mar 1 00:04:20.935: cc_api_call_setup_ind valid dest pattern, copying 6030 to calling number
*Mar 1 00:04:20.935: cc_api_call_setup_ind type 3 , prot 0
*Mar 1 00:04:20.935: cc_insert_call_entry: Increment call volume counter
*Mar 1 00:04:20.935: cc_insert_call_entry: current call volume: 1
*Mar 1 00:04:20.935: cc_insert_call_entry: entry's incoming TRUE. is_incoming is TRUE
*Mar 1 00:04:20.939: cc_incr_if_call_volume: not the VoIP or MMoIP
*Mar 1 00:04:20.939: cc_process_call_setup_ind (event=0x8193FBF4)
*Mar 1 00:04:20.939: >>>>CCAPI handed cid 2 with tag 1 to app "DEFAULT"
*Mar 1 00:04:20.939: sess_appl: ev(24=CC_EV_CALL_SETUP_IND), cid(2), disp(0)
*Mar 1 00:04:20.943: sess_appl: ev(SSA_EV_CALL_SETUP_IND), cid(2), disp(0)
*Mar 1 00:04:20.943: ssaCallSetupInd
*Mar 1 00:04:20.943: ccCallSetContext (callID=0x2, context=0x81853F50)
*Mar 1 00:04:20.943: ssaCallSetupInd cid(2), st(SSA_CS_MAPPING),oldst(0), ev(24)ev->e.evCallSetupInd.nCallInfo.finalDestFlag = 0
*Mar 1 00:04:20.943: ccCallSetupAck (callID=0x2)
*Mar 1 00:04:20.943: cc_api_set_transfer_info: (transfer= 0, callID=0x2)
*Mar 1 00:04:20.943: cc_api_set_transfer_info: call transfer reset)
*Mar 1 00:04:20.943: ccGenerateToneInfo (callID=0x2 tone=8)
*Mar 1 00:04:20.943: ccCallReportDigits (callID=0x2, enable=0x1)
*Mar 1 00:04:20.943: cc_api_call_report_digits_done (vdbPtr=0x819546C8, callID=0x2, disp=0)
*Mar 1 00:04:20.943: sess_appl: ev(52=CC_EV_CALL_REPORT_DIGITS_DONE), cid(2), disp(0)
*Mar 1 00:04:20.943: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_CALL_REPORT_DIGITS_DONE)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:20.947: ssaReportDigitsDone cid(2) peer list: (empty)
*Mar 1 00:04:20.947: ssaReportDigitsDone callid=2 Enable succeeded
*Mar 1 00:04:20.947: ccGenerateToneInfo (callID=0x2 tone=8)
*Mar 1 00:04:22.883: cc_api_call_digit_begin (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=1, digit_begin_flags=0x1, rtp_timestamp=0xEE81E9A3
rtp_expiration=0x0, dest_mask=0x1)
*Mar 1 00:04:22.887: sess_appl: ev(10=CC_EV_CALL_DIGIT_BEGIN), cid(2), disp(0)
*Mar 1 00:04:22.887: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_DIGIT_BEGIN)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:22.887: ssaIgnore cid(2), st(SSA_CS_MAPPING),oldst(0), ev(10)
*Mar 1 00:04:22.963: cc_api_call_digit_end (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=1,duration=115,xruleCallingTag=0,xruleCalledTag=0, dest_mask=0x1), digit_tone_mode=0
*Mar 1 00:04:22.963: sess_appl: ev(9=CC_EV_CALL_DIGIT_END), cid(2), disp(0)
*Mar 1 00:04:22.967: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_CALL_DIGIT)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:22.967: ssaDigit
*Mar 1 00:04:22.967: ssaDigit, 0. sct->digit , sct->digit len 0, usrDigit 1, digit_tone_mode=0
*Mar 1 00:04:22.967: ssaDigit,1. callinfo.called , digit 1, callinfo.calling 6030, xrulecallingtag 0, xrulecalledtag 0
*Mar 1 00:04:22.967: ssaDigit, 7. callinfo.calling 6030, sct->digit 1, result 1
*Mar 1 00:04:23.095: cc_api_call_digit_begin (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=1, digit_begin_flags=0x1, rtp_timestamp=0xEE81E9A3
rtp_expiration=0x0, dest_mask=0x1)
*Mar 1 00:04:23.095: sess_appl: ev(10=CC_EV_CALL_DIGIT_BEGIN), cid(2), disp(0)
*Mar 1 00:04:23.095: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_DIGIT_BEGIN)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:23.095: ssaIgnore cid(2), st(SSA_CS_MAPPING),oldst(0), ev(10)
*Mar 1 00:04:23.175: cc_api_call_digit_end (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=1,duration=115,xruleCallingTag=0,xruleCalledTag=0, dest_mask=0x1), digit_tone_mode=0
*Mar 1 00:04:23.175: sess_appl: ev(9=CC_EV_CALL_DIGIT_END), cid(2), disp(0)
*Mar 1 00:04:23.175: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_CALL_DIGIT)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:23.175: ssaDigit
*Mar 1 00:04:23.175: ssaDigit, 0. sct->digit 1, sct->digit len 1, usrDigit 1, digit_tone_mode=0
*Mar 1 00:04:23.175: ssaDigit,1. callinfo.called , digit 11, callinfo.calling 6030, xrulecallingtag 0, xrulecalledtag 0
*Mar 1 00:04:23.175: ssaDigit, 7. callinfo.calling 6030, sct->digit 11, result 1
*Mar 1 00:04:23.443: cc_api_call_digit_begin (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=7, digit_begin_flags=0x1, rtp_timestamp=0xEE81E9A3
rtp_expiration=0x0, dest_mask=0x1)
*Mar 1 00:04:23.447: sess_appl: ev(10=CC_EV_CALL_DIGIT_BEGIN), cid(2), disp(0)
*Mar 1 00:04:23.447: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_DIGIT_BEGIN)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:23.447: ssaIgnore cid(2), st(SSA_CS_MAPPING),oldst(0), ev(10)
*Mar 1 00:04:23.523: cc_api_call_digit_end (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=7,duration=115,xruleCallingTag=0,xruleCalledTag=0, dest_mask=0x1), digit_tone_mode=0
*Mar 1 00:04:23.523: sess_appl: ev(9=CC_EV_CALL_DIGIT_END), cid(2), disp(0)
*Mar 1 00:04:23.527: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_CALL_DIGIT)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:23.527: ssaDigit
*Mar 1 00:04:23.527: ssaDigit, 0. sct->digit 11, sct->digit len 2, usrDigit 7, digit_tone_mode=0
*Mar 1 00:04:23.527: ssaDigit,1. callinfo.called , digit 117, callinfo.calling 6030, xrulecallingtag 0, xrulecalledtag 0
*Mar 1 00:04:23.527: ssaDigit, 7. callinfo.calling 6030, sct->digit 117, result 1
*Mar 1 00:04:23.855: cc_api_call_digit_begin (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=9, digit_begin_flags=0x1, rtp_timestamp=0xEE81E9A3
rtp_expiration=0x0, dest_mask=0x1)
*Mar 1 00:04:23.855: sess_appl: ev(10=CC_EV_CALL_DIGIT_BEGIN), cid(2), disp(0)
*Mar 1 00:04:23.855: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_DIGIT_BEGIN)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:23.855: ssaIgnore cid(2), st(SSA_CS_MAPPING),oldst(0), ev(10)
*Mar 1 00:04:23.955: cc_api_call_digit_end (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=9,duration=135,xruleCallingTag=0,xruleCalledTag=0, dest_mask=0x1), digit_tone_mode=0
*Mar 1 00:04:23.955: sess_appl: ev(9=CC_EV_CALL_DIGIT_END), cid(2), disp(0)
*Mar 1 00:04:23.955: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_CALL_DIGIT)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:23.955: ssaDigit
*Mar 1 00:04:23.955: ssaDigit, 0. sct->digit 117, sct->digit len 3, usrDigit 9, digit_tone_mode=0
*Mar 1 00:04:23.959: ssaDigit,1. callinfo.called , digit 1179, callinfo.calling 6030, xrulecallingtag 0, xrulecalledtag 0
*Mar 1 00:04:23.959: ssaDigit, 7. callinfo.calling 6030, sct->digit 1179, result 0
*Mar 1 00:04:23.959: ccCallReportDigits (callID=0x2, enable=0x0)
*Mar 1 00:04:23.959: cc_api_call_report_digits_done (vdbPtr=0x819546C8, callID=0x2, disp=0)
*Mar 1 00:04:23.959: ssaSetupPeer cid(2) peer list: tag(3) called number (1179)
*Mar 1 00:04:23.959: ssaSetupPeer cid(2), destPat(1179), matched(1), prefix(), peer(8191BA0C), peer->encapType (2)
*Mar 1 00:04:23.959: ccCallProceeding (callID=0x2, prog_ind=0x0)
*Mar 1 00:04:23.959: ccCallSetupRequest (Inbound call = 0x2, outbound peer =3, dest=, params=0x8194FDE0 mode=0, *callID=0x81950210, prog_ind = 3) callingIE_present 0
*Mar 1 00:04:23.959: ccCallSetupRequest numbering_type 0x81
*Mar 1 00:04:23.963: ccCallSetupRequest encapType 2 clid_restrict_disable 1 null_orig_clg 1 clid_transparent 0 callingNumber 6030
*Mar 1 00:04:23.963: dest pattern 1..., called 1179, digit_strip 0
*Mar 1 00:04:23.963: callingNumber=6030, calledNumber=1179, redirectNumber= display_info= calling_oct3a=0
*Mar 1 00:04:23.963: accountNumber=, finalDestFlag=0,
guid=2354.2999.14ef.11cc.8008.bb84.44aa.06a5
*Mar 1 00:04:23.963: peer_tag=3
*Mar 1 00:04:23.963: ccIFCallSetupRequestPrivate: (vdbPtr=0x818A8AE0, dest=, callParams={called=1179,called_oct3=0x81, calling=6030,calling_oct3=0x0, calling_xlated=false, subscriber_type_str=RegularLine, fdest=0, voice_peer_tag=3},mode=0x0) vdbPtr type = 1
*Mar 1 00:04:23.963: ccIFCallSetupRequestPrivate: (vdbPtr=0x818A8AE0, dest=, callParams={called=1179, called_oct3 0x81, calling=6030,calling_oct3 0x0, calling_xlated=false, fdest=0, voice_peer_tag=3}, mode=0x0, xltrc=-5)
*Mar 1 00:04:23.963: cc_insert_call_entry: not incoming entry
*Mar 1 00:04:23.963: cc_insert_call_entry: entry's incoming FALSE. is_incoming is FALSE
*Mar 1 00:04:23.967: ccSaveDialpeerTag (callID=0x2, dialpeer_tag=0x3)
*Mar 1 00:04:23.967: ccCallSetContext (callID=0x3, context=0x81854A68)
*Mar 1 00:04:23.967: sess_appl: ev(52=CC_EV_CALL_REPORT_DIGITS_DONE), cid(2), disp(0)
*Mar 1 00:04:23.967: cid(2)st(SSA_CS_CALL_SETTING)ev(SSA_EV_CALL_REPORT_DIGITS_DONE)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:23.967: -cid2(3)st2(SSA_CS_CALL_SETTING)oldst2(SSA_CS_MAPPING)
*Mar 1 00:04:23.967: ssaReportDigitsDone cid(2) peer list: (empty)
*Mar 1 00:04:23.967: ssaReportDigitsDone callid=2 Reporting disabled.
*Mar 1 00:04:23.967: cc_api_supported_data data_mode=0x10002
*Mar 1 00:04:23.971: cc_incr_if_call_volume: remote IP is 192.168.10.210
*Mar 1 00:04:23.971: cc_incr_if_call_volume: hwidb is FastEthernet0/0
*Mar 1 00:04:23.971: cc_incr_if_call_volume: create entry in list: 1
*Mar 1 00:04:25.975: ccTDUtilGetInstanceCount: For tagID[1] of callID[3]
*Mar 1 00:04:25.975: ccTDPvtProfileTableObjectAccessManager: No profileTable set for callID[3]
*Mar 1 00:04:25.975: ccTDUtilGetInstanceCount: For tagID[2] of callID[3]

Is there a link between the Calendar and the Address Book

I wanted to know if there is a way that if you are setting up an appointment in the Calendar that you are able to place a contact name from the address book and link that information with the scheduled appointment?
Thanks
John

Not within the native RIM OS, no.
But I use an application called RexConnect which will perform that function--and many others, such as allowing an email to be inserted into a calendar event or task--or vice versa.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Cost in simulation not consistent between accounting column and cost assign

When doing simulation on a trip report that has cash advanced used included I get a inconsistency between
accounting column and trip cost statement in the simulation window.
In the accouting column in simulation, the cash advance used is included as a part a total cost but when I look at trip cost statement that value is not included as an expense to be transferred.
This seems a bit strange to me.
Any suggestions?

Hi,
Following could have a reason.
On travel request you may had checked on Cash Office column while requesting advance...
How to resolve it..
You cannot change advance so you have to do following thing.
1) Enter the same amount in negative along WITH checked on Cash Office column ..
2) Enter New amount WITHOUT check on cash office.
then run again simulation..
I hope it would serve your purpose...
Regards,
Muhammad Umer

Color Consistency between Hardbacked book and soft backed book

Similar Messages

Maybe you are looking for