Color copier 190 message remove and check black carriage

I have an older HP color copier 190 and even though I have purchased new black and color cartridges and have placed them in correctly, I continue to get the message "remove and cheack black(or color) cartridge".
Can anyone help me with this issue?
bernice

Hello,
I am sorry you are experiencing issues with your HP 190. Here is a troubleshooting document that may help narrow down or resolve the ink cartridge issue:
http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=bpa00299&tmp_task=solveCategory&cc=us&dlc=en&lan​...
Good luck!
I work for HP, However, I am speaking for myself and not for HP

Similar Messages

  • PSC 2110 "remove and check black cartridge"

    I'm getting an error message "Remove and check black cartridge" even though my cartridge is not empty (purchased it recently) and has not expired. I have removed it, cleaned it, cleaned the contacts on the printer and reinserted. It takes me through the align cartridges process and after I press enter to scan the alignment page I get the "remove and check black cartridge" message again. Also I have replaced the colour cartridge (per advice on another site) and put a folded piece of paper in front of the black cartridge so that it presses against the contacts 'better' - all to no avail. I bought a new black cartridge yesterday (expires in 2010) and get the same message. All of my cartridges are HP, not refills or cheap brands.
    I would appreciate any suggestions.. thanks

    Thank you - - I went through your two suggestions and still got the "remove and check black cartridge" message after the partial reset. I decided to try putting the photo (58) cartridge in instead of reinserting the black cartridge. (I had done this some time ago and got a different error msg - telling me to insert the black cartridge - so I didn't think it would work but thought I'd try anyway). It took me all the way through the alignment process and the printer seems fine - at least I was able to print. Maybe my black cartridges are faulty??

  • Error message: "Remove and check cartridge"--what should I do? (officejet 6110xi all-in-one)

    I got a printer (as above) in a yard sale.  When I first turned it on, it had an error message: "Remove and check cartridge".  I pulled out and looked at the cartridge, nothing seemed wrong (except perhaps the mildly inexplicable twist tie). Then I tried cleaning the contacts, did a hard restart, and looked for damage to the flex (there was none I could see), as suggested here: http://h30434.www3.hp.com/t5/Other-printing-questions/Need-help/m-p/71/highlight/true#M8
    Still no love.
    What does it want me to do?

    Hi,
    Try this link
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00054462&cc=us&lc=en&dlc=en

  • My 2210 all in one printer keeps giving the message "Remove and check cartridge"

    My 2210 all in one printer keeps giving the message "Remove and check cartridge." Although I go through procedures outlined in manual, message keeps reappearing. Suggestions?

    Hello again!
    Still having problems but here's more info: Checked "Resume" but  Message next to the job says ERROR but that 'Pinter is ready'.
    However, on the PRINT & FAX page in System Preferences it has 'Idle' next to the psc1317 (default) printer.The computer scans the document but wil not print it. With printer off I disconnected the power cable and the USB from the computer then re-connected after 1 minute.  When I turned the printer back on it printed the test sheet but not the document.  I have also unistalled then reinstalled the hp1317 Snow Leopard software and driver and computer says that all software is up to date. Apart from a dodgy connection I have no idea where to go from here!

  • HP 1610v error message: Remove and check color cartridge

    In the middle of printing, my HP 1610v All-In-One PSC just stopped and displayed an error message reading "remove and check color cartridge". I did.... but couldn't really determine what I'm supposed to be looking for though. Ink cartridge is full, clean, and seems fine. Not only can I not figure out what I'm supposed to do to fix it....I can't do ANYTHING. no printer menu access, no printing with only the black cartridge, only an orange exclamation point that ceaselessly blinks at me.
    I've tried unplugging and waiting 20 seconds
    I've put 3 different color cartridges in and the error message only went away with the EMPTY cartridge...which, of course, I couldn't print with!
    Please Help ASAP!!
    Thanks!

    Hi there iceefrost,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • How do I fix error message remove and check color cartridge?

    I have a PSC 2355xi all in one printer. I recently tried to replace the ink cartridges. Error code...Remove and replace color cartridge shows in the printer window. Now the printer will not work at all and I haven't found the fix. HP "Customer Support" has been NO HELP AT ALL!

    Hello Kimosabe
    If you have not already please try this article it may help with your problem.
    Remove and Check Cartrdige Error
    Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
    When a solution is found please mark the post that solves your issue.

  • Error message: "remove and check cartridge on right." photosmart 2610

    I installed two brand new HP cartridges (color and black) in my Photosmart 2610 all-in-one about 1 month ago and they were working fine but now I get an error message asking me to "remove and check cartridge on right." When I check the cartridge (black), it looks fine but the error message won't go away and the printer won't print. Suggestions?

    I had the same problem, I have tried resetting with #6 or #3, cleaning.
    What worked for me:
    1 - While printer is on, go to the "Mfg Commands"
    (on my printer I had to press "*" and "#", others would need to press both left and right arrows, etc.)
    2 - You will get the following message "Enter special key combo", then enter "123".
    3 - Press the right arrow until you find "Special Reports", click OK
    4 - Press the right arrow until you find "Print Cartridges", click OK
    What was my surprise when at number 3, it started printing !
    And then, everything came back to normal !
    Super cool !
    Hope this works for you !

  • My photosmart 2610 has an error message "Remove and check cartridge on right"

    I have replaced both the black and color cartridge and still have the error message. Also have restarted computer and turned printer off and on several times.  Need help!

    Hi ruf,
    Check this article and see if this can fix your printer - Remove and Check Cartridge
    Hope this works for you!
    ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
    Cheers!
    * If this post has helped you, the White Kudos star on the left is a great way to say thanks!
    * Please mark Accept As Solution if it solves your problem so other users can benefit as well.

  • My hp psc 2210 gives message remove and check cartridge, i did, there is nothing that looks wrong,

    I look inside around wehre the cartriges go and didn't see any loose springs etc. If i remove the left cartridge, it still gives the same message, if i remove the right catridge, it tells me to insert the right cartridge.  
    The only function that I am able to do is scan using the comptuer.  (not able to copy or fax, or print)
    When this message first occured, the printer made a clunking noise,  That noise, does not always repeat when attaching the power cord, but the message always is present.
    Appreciate any help you can provide.
    the ink cartridges are farily new and full and hp.
    the id's on the printer are:
    MY310F75DX
    C8654A
    IC 4660-Pl5MO201
    C8654-00019
    the id's on the cartridges are:
    22 Tri Color
    2011/09/05  S
    L10 2 14:45:14
    21 Black
    2011/09/08 Y
    L05 1 06:59:20
    Thanks
    Ashwin1980

    Remove the right cartridge and clean the contacts on the cartrdige and printer as shown in this page.  If that does not correct the issue you will need a new cartridge, check the warranty for your current cartridge as shown here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • 2110 printer ERROR message - remove and check cartriges

    I replaced black cartrige twice and still message - the color cartrige i did not replace however I'm only printing in black and have done this before with no problem- why cant i get this message to go away or am i missing somthing

    Hi @rem123,
    Thank you for visiting the HP Support Forums! I understand after years of non use, you put new cartridges in your HP PSC 750 and now you are getting a cartridge error message.
    I would like you to start troubleshooting here: 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error M...
    Because there are many variations of these 'Problem with Printhead,' 'Printer Failure,' or 'Ink System Failure' error messages and alphanumeric codes, we have provided a few guided steps to get you to the right troubleshooting document for your error. Select the statement that best describes your situation.
    If you are still getting the error message after all the troubleshooting has been done, please contact our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Error message: Remove and check cartridge

    My mom has a HP psc 2175 all-in-one printer.  It has been working fine up until a week ago when the above message appeared.  After reading other posts on this forum, I noticed other people have had this same problem.  We have cleaned cartridge heads, uninstalled/reinstalled printer & drivers, even tried new cartridges , also a "hard reset" and nothing worked.  Still getting the same error message.  Any ideas?  Her pc is an HP with Windows 7.  Any help is greatly appreciated.

    I had the same problem, I have tried resetting with #6 or #3, cleaning.
    What worked for me:
    1 - While printer is on, go to the "Mfg Commands"
    (on my printer I had to press "*" and "#", others would need to press both left and right arrows, etc.)
    2 - You will get the following message "Enter special key combo", then enter "123".
    3 - Press the right arrow until you find "Special Reports", click OK
    4 - Press the right arrow until you find "Print Cartridges", click OK
    What was my surprise when at number 3, it started printing !
    And then, everything came back to normal !
    Super cool !
    Hope this works for you !

  • Need to bypass "Remove and check color cartridge" error message

    I have an old HP printer giving me the error message "Remove and check color cartridge." I remove it, it's good, I put it back, same message. I try leaving it out, I get an error message asking me to install a color ink cartridge.
    I DON'T EVEN WANT TO PRINT WITH THIS PRINTER. I have a new HP printer connected to my wireless network that I use for all my printing. I am using the old printer for its scanning capabilities in my crafting area. I am JUST wanting to scan old pictures to an external hard drive for storage, so that I don't have thousands of print photos sitting around in boxes and files.
    Please help.

    I had the very same problem with my HP Officejet 7410 so cleaned the ink cartridge and carriage contacts per the directions listed on this link: 
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01423559&tmp_task=solveCategory&cc=us&dlc=en&la...
    After my first attempt at cleaning these contacts, i reinserted the cartridge and tried printing again but I got the same error message.  Next I removed both cartridges (color & black) from their slots and after pointing a flashlight at the carriage I discovered the bottom of the carriage was covered with ink, so....using over a dozen cotton swabs I cleaned the bottom of the carriage as best i could.  Also, thinking that perhaps the ink cartridge was not manufactured exactly to its proper size and shape, when i inserted the cartridges back into their slots I slightly pressed them in to be sure the contacts would touch. 
    I was happy to see that now the error message is gone and my printer is printing again....well, at least for now.

  • 1600 all-in-one series printer error message to remove and check color cartridge will not go away

    Error message, remove and check color cartridge will not go away even after replacing cartridge (same refilled).  Any help would be appreciated.

    I had the very same problem with my HP Officejet 7410 so cleaned the ink cartridge and carriage contacts per the directions listed on this link: 
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01423559&tmp_task=solveCategory&cc=us&dlc=en&la...
    After my first attempt at cleaning these contacts, i reinserted the cartridge and tried printing again but I got the same error message.  Next I removed both cartridges (color & black) from their slots and after pointing a flashlight at the carriage I discovered the bottom of the carriage was covered with ink, so....using over a dozen cotton swabs I cleaned the bottom of the carriage as best i could.  Also, thinking that perhaps the ink cartridge was not manufactured exactly to its proper size and shape, when i inserted the cartridges back into their slots I slightly pressed them in to be sure the contacts would touch. 
    I was happy to see that now the error message is gone and my printer is printing again....well, at least for now.

  • "Remove and check cartridge" error message

    My Dell Latitude died.  It was hooked up to my hp psc 2110 all in one printer.
    After completing the set-up basics on new laptop, I downloaded the drivers for the printer successfully.  A test was successful. 
    Next day, I tried to print.  The printer told my laptop that the ink was low.  Installed new cartridge; hit enter to align.  It went all the way through alignment, but would not print.  Instead it posted the scrolling message “Remove and check cartridge”. 
    I removed and reinserted the cartridge and nothing changed.  Same message. 
    Expensively (I really needed to print), I inserted a new cartridge.  The printer started to align the cartridge.  At the second bar it froze.  I watched the two unchanging bars for twenty minutes. 
    Since then (in this order) I have:
    Turned off the printer for ten minutes and turned it back on.  It started scrolling (?) “Remove and check
              cartridge” 
    Uninstalled then downloaded the drivers and tried all again.
    Left everything off for forty-eight hours.
    The troubleshooter from the computer couldn’t identify the problem, but said the toner was fine.
    I could not print a self-test report because no matter what button I push nothing changes.
    Opening and closing the top section (in order to replace cartridge) makes the cartridge move, but does
                   nothing to the message.
    http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&taskId=1
                   10&prodSeriesId=295848&prodTypeId=18972&supportTaskId=42089  does not have this error
                   message
    Looked at and tried all suggestions on HP forums.
    The three little green lights (best, normal, fast) flash together.
    It still only scrolls “Remove and check cartridge”.
    I have not hit it.       I am out of ideas.           I cannot afford a new printer.
    PLEASE HELP.   (Please keep it clear and simple.)
    hp psc 2110 all-in-one printer · printer · scanner · copier   MY342F5744    C8644A   Made in Malaysia
            (inside:    MY342F5744    C8644-60002)
    Windows 7
    Toshiba Satellite L770
    Thank you.

    I, too, gave up, and purchased a new cartrige.  At least for me it did the trick. 

  • Error Message on the printer - Remove and check right cartridge

    How to fix error message:  "remove and check right cartridge" which you have done numerous times, plus cleaned cartridge nozzle.  Also, I have turned off power to printer, but nothing changed.  Help for HP Officejet 7210 All-in-One needed.
    This question was solved.
    View Solution.

    Funny that multiple people have this problem appear just after 9/1 on multiple printers/all-in-ones. I wonder how many people have this problem and don't report it here. Mine is on a 2710a all-in-one in excellent condition except for this cartridge problem.
    My contacts are not suddenly damaged and it is a relatively new well within the expiration date genuine HP cartridge that we have had for more than a few months. It has not been out of the printer nor has the printer been moved. It sits in a clean room with very little temperature variation from 72 degrees. All printers should be so lucky.
    This is not the first time nor the first printer I've had cartridge problems with HP printers. This is my third one and I'm done with HP printers. I love all other aspects of the printer but this one is infuriating enough to sour me for good.

Maybe you are looking for

  • Need some help... running out of time

    Hope everyone is well... I have a G5 dual 2.5 running 10.3.9... running final cut 5.0.4... I am having a **** of a time being able to capture my hd media... some days it works and some days it dosen't. deviceses used: sony hd cameras hdr-fx1 to shoot

  • Airport express extender not connecting to airport extreme

    Mac OSX 10.9.5 Airport Extreme version 7.6.4 Airport Express version 7.6.4 I've done a hard reset of both Extreme and Express, set up Extreme and cannot set up Express as an extender.  Airport utility recognizes the Express, but shows an amber light.

  • Name of person in Purchasing group

    Hi experts Is there some table or function module that I can find the user name of person in purchasing group? Thanks Nilson

  • SAP Printing problem

    Hi friends, I have a problem with saplpd. When ever my user tries to take print with the output device LOCL, the user is not getting the printout . Following is the saplpd error messages: <b>"Error:StartPage failed ret=0,error =Overlapped I/O Operati

  • No support for AVCHD video

    Currently Lightroom 4 does not seem to support .m2ts format video, will that change going forward? I'd like to be able to get the most out of my Sony A77, or at least be able to down sample it for use. Thanks!