Color correcting globally

Is there anyway I can color correct a 20 page doc, (booklet) in Indesign globally? If not is there a easy work around without opening all the images in photoshop?  Cheers Zac

I imagine that the color changes you are seeing are because the sequence is not fully rendered. Do a test by fully rendering just a section.
And yes, you are color correcting the clip including any transitions in and out.
Message was edited by: Michael Grenadier

Similar Messages

  • How to color correct a multiclip

    hi,
    i'm going to edit a multiclip ( 2 angles )
    since one angle need a costant color correction and the other angle a different one, which is the best and fastest way to proceed?
    thanks

    apply any constant grade to the 2 clips BEFORE you make them into a multiclp. you can either correct them by dragging the color corrector onto them whilst they are in the viewer and correcting there, or by editing them into a sequence first, applying the correction, and then dragging the corrected clip back from the sequence into the bin. create the multiclip form these already corrected clips ... only then will the applied grade be carried automatically through to each clip instance in the edit
    if you have already edited and now want to apply global corrections after the fact, then you need to correct one representative clip from one of the angles, then use the Find command to find (and select) all other occurrences of that angle in your completed sequence, and then drag that same correction onto the selected clips ... repeat for each angle

  • Sequence color correction

    I am color correcting different clips in my sequence in order to have all the footage look the same. Is there some kind of graph or something else that can show me what's going with colors in my entire sequence so I can do this more precise? Do I have to use Color for that?

    I'm not aware of any feature that does what you're looking for.
    You could use the search feature to locate all clips with the same name...in the sequence, set in/out at head/tails, hit command-f, type in file name and change "Where" to 'From In to Out', then click on 'Find All'.
    Depending on how your project is set up, you could also control-click on a clip in the browser and select 'Label' and give it a color lable. This would assist in locating certain shots, that would benefit from a global color correction.
    I occasionally use both procedures when cutting 1-hour multiclips, by setting up a 'master' color correction for say...Cam1 CU or Cam4 OTS XWS..., apply it, copy it, then paste to all instances of the clip. However, I find that each shot ends up requiring some level of tweaking due to slight changes in color and luminance shifts/intensities, caused by differences in framing and movements in the frame.
    Hope that helps,
    K

  • How do I load color corrected RMD (RED) files in CS5.

    I have edited RED footage in cs5.
    I now have received color corrected RMD files - however I don't see the color correction on any clips in the timeline.
    What do I need to do to make sure edited footage (R3D files) on the timeline reflect color correction.
    I tried replacing footage, it didn't work - if I import the R3D again, apply the cuts and place on timeline I see color correction but I am sure there's a better way to do this. Any pointers will be great.
    Thanks.
    RV

    The following text from Adobe seems to indicate that there is "more" with CS5.5:
    (taken from: http://www.adobe.com/products/premiere/extend.displayTab2.html#REDSupport)
    The RED R3D Source Settings dialog box in Adobe Premiere Pro CS5.5 offers extensive control over the look of RED raw footage. In conjunction with the ability to change color settings per clip, you can save combinations of adjustments as custom presets, which can be applied to individual or multiple clips. The controls in the Source Settings dialog box include:
    Debayer Detail — Vary the level of detail extracted from the image sensor.
    Chroma — Denoise the red/blue channels.
    OLPF Compensation — Eliminate color Moire fringes by controlling the optical low-pass filter (OLPF) that refines edge detail.
    Maximum Bit Depth — Use this global setting to choose between 32-bit float and 8-bit.
    White Balance — Manipulate Kelvin, Tint, and Saturation levels.
    Timecode — Select the timecode track to use from the R3D file.
    Color Settings — Adjust the ISO setting, exposure, red, green, blue, brightness, contrast, and highlight levels.
    Color Space — Select the desired color space from among Camera RGB For RAW; Rec 709, the standard color space for HD; and REDspace, which is a more saturated variation of Camera RGB.
    Gamma Curve — Override the gamma curve selection using several preset gamma curves.
    User Curve — Use a custom curve created by the camera operator.
    Jim

  • My HD TV as NTSC Monitor for secondary color correction

    Can I use my new Panasonic HD TV model TH-42PX80U as a NTSC monitor for secondary color correction using both Final Cut Pro out of a Macbook Pro intel? What cable I can use to conect via HDMI? Will the color acuracy will be similar to that of a NTSC color correction monitor? will my TV do a decent job for NTSC? THANK YOU FOR YOUR HELP!
    I am not sure I have this HDMI cable to be use in my macbook pro does it comes with it?

    Can I use my new Panasonic HD TV model TH-42PX80U as a NTSC monitor for secondary color correction using both Final Cut Pro out of a Macbook Pro intel?
    Yes, but I would only trust it if you are going to be making DVDs, and ONLY if you properly set it up. I would not rely on it for broadcast color correction. The reason broadcast monitors exist is to have a standard...HDTVs don't have a standard. Go to best buy and look at all of them....none of them match. BUT, as a nice simple solution for DVD, I'd use it.
    But the only way you are going to get a signal to it is with the Matrox MXO. It will do component to the monitor, or you can get a DVI to HDMI adapter...if you do that the MXO software will allow you to set the monitor up to color bars. That option is only available from of the DVI out of the box.
    Will the color acuracy will be similar to that of a NTSC color correction monitor?
    No...it would be similar to color correcting NTSC on your home television...because that it what it is.
    will my TV do a decent job for NTSC?
    I doubt it. Taking an SD image and blowing it up huge on this HD TV...scaled up. I wouldn't think so. I wouldn't use it for SD color correction.
    I am not sure I have this HDMI cable to be use in my macbook pro does it comes with it?
    You have a DVI port on your MacBook Pro. And they make DVI to HDMI cable adapters I'm sure.
    http://library.creativecow.net/articles/ross_shane/MXO.php
    Shane

  • How can i change backgroud color of global template in fusion cloud?

    Hi all.
    someone of you could help me?
    How can i change backgroud color of global template in fusion cloud?

    Hi.
    Making CSS changes like this is currently only possible off-line, using the JDeveloper-like Skin Editor. This is described in our blog post here, a demo on our YouTube channel in this video, or the product documentation here. Coming soon is an online 'theme editor' feature which allows this kind of customization online. I would recommend that you raise a request with the Cloud Operations team to verify if they support the addition of custom skin files, otherwise you are limited to the online branding options currently available.
    Kind regards
    Richard
    FA Developer Relations

  • Looking for a particular color correction tutorial

    I am looking for an online tutorial on how to do color correction if the video one is working with has color bars.  This happens on a lot of analog videotapes that come to me.  I know what my scopes are suppposed to look like when analyzing color bars, but I need something that shows me how to get from A to B.
    If I Google some varient of "color correction video color bars," all I get is information on calibrating monitors.
    I am using Premiere CS5.5
    Thanks in adavnce for any response!
    J. D.

    APP - Layer...
    Also... Check this site for looking at APPs.. I've posted this before but it's a good site. It just started up a week or so ago.
    http://androidapplications.com/

  • Color correcting more than one clip at a time

    Perhaps I am missing something very elementary here... but here is my situation. I have three camera angles, each of the same concert. They are synced and ready to go, each on a separate track. Each needs color correction. I have found the color correction for each that I want. Before I slice up my clips I can very easily color correct each line separately, as the color correction applies to the whole clip. However, this takes about an hour to render because it is so much material. But since I am slicing up each track anyway to form a composite track, wouldn't it make more sense for me to slice up each track as I see fit, delete the unwanted footage, and then color correct each line before I drag them all into one composite track? That way, the color correction would just be applied to the clips that I am using, presumably taking about 1/3 the time to render. Know what I mean? So here is the question: can I select all of the clips on one line and THEN color correct just those? Or do I have to select each little clip and type in the boatload of numbers into the numeric color correction. Or is there another way all together. (Like, is there a way to SAVE the color correction values that I want and call them like "camera one" "camera two" etc... and then just apply those settings to the clips I want?)
    With my sound editing program I have presets for this concert. I am able to take each piece, open it up and apply the same equalization, amplification, reverb, etc. that I did for all of the others, thus making them all sound the same. I'm sure FCE has this option for video, doesn't it?
    I have 10 more pieces to do and by far this was the most time consuming part of the job. So any help would be most appreciated!
    Much thanks!

    Apply the color correction to one clip and adjust as needed. Copy the clip. Select all other clips that you want to apply the filter with those settings to. Right-click on one and select Paste Attributes/Filters.
    -DH

  • Camera Raw 5.5 VS Adobe Lightroom (color correction)

    Hi, does somebody know if discarding the advantage of making layers of Photoshop, is the Adobe Lightroom color correction controls superiors to the CameraRaw PS Interface correction controls ??? I mean for color correction purposes is Adobe Lightroom  better tan PS's  camera raw interface ???? because for me both controls seem to be pretty much the same thing,  does anyone know something about it ??
    Thank you in advance !

    RicardoAngelo wrote:
    I mean for color correction purposes is Adobe Lightroom  better tan PS's  camera raw interface ???? because for me both controls seem to be pretty much the same thing,  does anyone know something about it ??
    Both Camera Raw (most recent version) and Lightroom (most recent version) share the EXACT same processing pipeline...however, there are subtle differences in usability. For example, ACR 5.6 has a Point Curves Editor...Lightroom doesn't. Lightroom has a powerful capability to control output size and resolution which Camera Raw doesn't have...
    Bottom line is they are two horses of a different color but each is capable of performing the same tricks...so use whichever app allows you o accomplish what you need to do in the shortest and easiest process...

  • Masked color correction - new Pr Pro CC features or still use After Effects?

    I am finally getting around to this project. I know in CS6 the solution was to use After Effects.  I think I kept putting it off as I was not as familiar with that program as I am with PrPro.
    Anyway this is the issue.  I have 2 hours of old video I have captured that due to an internal camera malfunction (that was not discovered until the end of the tape)
    that has 5 or 6 cyan tinted narrow horizontal transparent bars running through it.  The image is there under the bars, it is just viewed through this cyan
    tint. The rest of the image outside of the bars is fine and the image inside the bars is fine, it just has a tint.  This is old SD footage. 
    An AE expert said I can make an Adjustment Layer in AE and use the Mask Shape Tool to draw several boxes around the problem cyan areas, apply the Curves and Hue/Saturation effect to the adjustment layer, then color correct. Some feathering would be needed (I know PS too so I can handle that part ) I think I recall back with PrProCS6, I could do this adjustment but only one bar at a time. I could be wrong about that.
    But anyway, sounds pretty easy in AE. But since I live in PrPro CC 2014 now, and I saw some recent new features with masks and adjustments, I was wondering if I could perform the same adjustments right in Pr Pro CC 2014?  If I need to use AE CC 2014, no worries, I have that installed.
    Thanks for the help as always!  This is family footage that I would really like to rescue.
    BJBBJB1

    Thanks so much Dave.  It fixed the problem.
    Raoul.

  • Secondary color correction not working in Premiere CC

    Greetings,
    I'm unable to build secondary color correction masks in Three Way Color Corrector, RGB Curves etc in the current version of Premiere CC.
    In any of these plugins, when I check "show mask" I get the usual white slate filling the frame. But when I use the color picker to make a selection the whole frame stays white. It appears that I'm making selections but it's not building the mask for some reason. When making an extreme color change I can see that the mask is not building as it affects the whole frame.
    This started after upgrading to CC. I've recently updated to the most up to date version (yesterday) and am still having the same problem.
    Premiere CC 2014.1 Release
    8.1.0 (81) Build
    Macbook Pro Retina, 15" Late 2013
    2Gh Intel Core i7
    8Gb
    Intel Iris Pro 1536Mb
    Yosemite Version 10.10
    *note-my Colleague is not having this problem, he's working on the same OS and same CC build but he has an Imac. So I'm guessing this problem is unique to my hardware config.
    Anybody else have this problem or know of a fix?

    I have the same Problem new MAC OS Premier Pro CC or Premier Pro CS6 both have an issue with the Title Tool. If you open the title tool and try to make color changes or change size of the font it sticks at the default color and default font. SOmetimes the title tool will work and then when I exit it's back to the default first type location, default font and default color. Sometimes it will not even let me exit the Title Tool.
    Please help I have Projects I'm working on Deadlines and I pay a monthly Fee for Software that works and it's not working.
    Model Name:          Mac Pro
      Model Identifier:          MacPro5,1
      Processor Name:          6-Core Intel Xeon
      Processor Speed:          2.4 GHz
      Number of Processors:          2
      Total Number of Cores:          12
      L2 Cache (per Core):          256 KB
      L3 Cache (per Processor):          12 MB
      Memory:          16 GB
    Software  OS X 10.9 (13A603)
    Graphics  ATI Radeon HD 5770 1024 MB

  • Transitions not working in Premiere CS6.Video was color corrected in AE 6 and sent back to PPro cs6.

    I exported my film to AE6 from Premiere CS6 for color-correction and got it back to Premiere Pro through DYNAMIC LINK.Now,the problem is that AE has discarded all the transitions and also cross-dissolve and film-dissolve don't seem to work on this color-corrected video.I am able to apply the transitions but they don't work....somebody please help!

    As Jim said, not all effects and transitions are properly translated when you replace a group of clips with dynamically linked AE composition. Actually you should have noticed that your cross-dissolves etc. had been replaced with black solid layers in After Effects, which didn't reflect your PrPro transitions.
    Now you can jump back to your AE project and fix broken transitions there.
    For your future work you should keep it in mind and decide whether to replace a group of clips (and, therefore, fix broken transitions in After Effects) or a single clip, taking care of its handles.

  • Connecting Color Correction Monitor To My G5 (Help Please)

    Hello everyone. I'm getting ready to begin color correction on a DV feature I've just finished audio post on. I have a Macintosh dual 2Gig G5. It's an early G5 that has PC133 slots, however, and is NOT HD compatible or ready. I cannot use an HD video card (AJA, etc) or an HD monitor for cc - and simply cannot afford an AJA IO - so I'm going to work with SD. In the research I've done it looks like the JVC DT V1710CGU - a 17" monitor that is said to have decent critical color correction capabilities is what I might purchase (here's a link to one)
    http://images.google.com/imgres?imgurl=htt...s%3Den%26sa%3DN
    How would I be able to get my video out to the monitor using my G5? The reason I ask this is because, simple as I thought it was, when I went to purchase the actual monitor and the tech tried to use it to see video from his laptop . . . it didn't work.
    He plugged from the computer to the JVC monitor using a DVI to VGA adapter connected to a VGA to RGB cable (the DVI end of the adapter being connected to the computer) and connected that RGB end of the cable into the JVC.
    He tried a lot of different monitor formats in his laptop to try to conform the computer's signal for the JVC, but nothing seemed to work. I myself have a Sony DVMC-DA2 analogue to digital media converter that I used to get video from the G5 to view on an external television set. The media converter is connected to the G5 via fire wire, and then connect to the tv using RCA cables, but the tech said that you DON'T want to connect the JVC monitor using RCA cables (composite . . . right?). He said use RGB cables (component).
    Does anyone know, again, how to be able to get the JVC DT V1710CGU to output video from my G5 (Final Cut Pro specifically)?
    Any help would be appreciated.
    Thank you,
    Javier Calderon

    Thank you much for the prompt reply, David. I really appreciate it.
    I just realized right now - after reading your post and investigating, that is - that my Sony DVMC-DA2 has S-Video in and out. This seems that it would be sufficient then, no? So . . . what's the proper connection then? Let me know please if this is it:
    Connect my Sony media converter to the G5 via fire wire. Go out of the media converter via S-Video and IN to the JVC color correction monitor . . . via . . . what? Does the JVC monitor have S-Video in?
    Thanks again for your help, by the way. You've already clear me up a bit.
    Javier

  • How to apply 3 way color correction to multiple clips in Final Cut Pro?

    I have multiple clips from the same time and space footage that need color correction. I have worked on one of the clips and found the settings I like.
    Is there a way to apply that correction to other clips without starting from scratch on each one?
    Thanks!

    SoCal (above) listed one way. Another way you can do it if you like the color correction that you have done and want to save it, you can click the picture of the hand in the color correction tab and drag it into the browser. This saves that specific arrangement of colors, highlights, etc.
    Also, this might be a little easier but instead of pasting attributes and right clicking you can just grab the hand (that I just talked about) and drag it onto the clips you want to apply the same color correction to. The hand is located in the color correction tab (in viewer) and is under the "numeric" button.
    Note: All of your clips in your timeline will have different contrasts, brightness, colors, etc. NO clip is going to have the EXACT same attributes as another. It doesn't matter how expensive and professional your camera is. Every shot is different whether you are using artificial lighting or the natural lighting. Having that said, you will probably still need to adjust your different clips a little bit to make them look like they are in the same room at the same time. Hopefully if your lucky or had perfect lighting for all of your shots, you will not have to do much messing around with your contrast, brightness, etc. Good luck!

  • Color Correction with in Final Cut Pro 6

    Hi All,
    I have a showreel of my work, and some of the clips have sections that are darker than I would like them to be, and I would like to correct the color issues. Is it possible to only correct 3 seconds of over dark video, and not have the entire 2 hours thus over bright? I have tried with key frames, and maybe I am not doing the right way.
    I put a keyframe on the 1st frame of the clip in question, then on the last frame of the correct section of the clip, then 1 frame later another keyframe, this is now on the incorrect color clip, then 2 more keyframes, last frame of incorrect color, then on the 1st frame of correct video.
    Is this ok?
    Justine

    A better way is to blade (or add edit) at the beginning and end of the section that needs the correction and just apply the color correct filter to that section. 

Maybe you are looking for