Color correction change across all clips?

I know how to make a color correction to my first clip, then I can copy and paste it onto all the other clips. However, what if I want to change the color correction later on? I have to delete all the color corrected clips, and then make a new correction and re-paste. Then if I want to do it all again, same hassle. This can be very bad when working with hundreds of clips on the timeline.
I wonder if I can set up a color correction profile and then send the clip to that profile. Then I can change the profile and each clip will follow that.
Thanks,
MrD

Two observations...
1. You don't have to delete the clips to change the CC. You simply modify settings in the effects panel.
2. Provided that you want to apply the same CC to all the clips in (say) Timeline One - nest Timeline One inside Timeline Two and apply CC to it. In this way you only have to apply one CC instance..

Similar Messages

HT4589 Is there a recomended way to delete proxy and optimized clips once a project is completed and is ready for archive? also, can proxy and optimized clips be removed (to save space) once a project is ready for color correction and the original clips a

Is there a recomended way to delete proxy and optimized clips once a project is completed and is ready for archive? also, can proxy and optimized clips be removed (to save space) once a project is ready for color correction and the original clips are used

No, they are NOT the same as proxy or optimized.
When you add a clip to your timeline and, say, apply an effect to it, or superimpose a title on the clip, FCP X has to make many calculations to determine what color each pixel of each frame should be. If a section of your timeline is not rendered, it has to do all these calculations every time you play those frames. A render file has the frames already "calculated", so it plays fast and smoothly.
For simple compositions and a fast computer, you may avoid rendering completely - and you may also choose to only render the portions where playback stutters.
Render files can be safely deleted. FCP X can recreate them if needed (either automatically if you have "background render" on, or on demand, when you select the "render" or "render all" commands).

I have Lion on my laptop and I want to back up my calendar TO my iphone. Not the reverse. iCloud only goes from iphone to iCloud to mac not the other way. Also, why doesn't "sync" mean update most recent changes across all devices?

I have Lion on my laptop and I want to back up my calendar TO my iphone. Not the reverse. iCloud only goes from iphone to iCloud to mac not the other way. Also, why doesn't "sync" mean update most recent changes across all devices? I thought that was the point of iCloud. Any suggestions since iCloud doesn't seem to work?

It's a work computer so I wanted to save them to my iTunes so I can access from another computer. Should I go to a home computer and just Import for best results? If so how do I do this? Also, why would I be synched with another library and how do I find out what this is? Very new/green user here

Color correcting more than one clip at a time

Perhaps I am missing something very elementary here... but here is my situation. I have three camera angles, each of the same concert. They are synced and ready to go, each on a separate track. Each needs color correction. I have found the color correction for each that I want. Before I slice up my clips I can very easily color correct each line separately, as the color correction applies to the whole clip. However, this takes about an hour to render because it is so much material. But since I am slicing up each track anyway to form a composite track, wouldn't it make more sense for me to slice up each track as I see fit, delete the unwanted footage, and then color correct each line before I drag them all into one composite track? That way, the color correction would just be applied to the clips that I am using, presumably taking about 1/3 the time to render. Know what I mean? So here is the question: can I select all of the clips on one line and THEN color correct just those? Or do I have to select each little clip and type in the boatload of numbers into the numeric color correction. Or is there another way all together. (Like, is there a way to SAVE the color correction values that I want and call them like "camera one" "camera two" etc... and then just apply those settings to the clips I want?)
With my sound editing program I have presets for this concert. I am able to take each piece, open it up and apply the same equalization, amplification, reverb, etc. that I did for all of the others, thus making them all sound the same. I'm sure FCE has this option for video, doesn't it?
I have 10 more pieces to do and by far this was the most time consuming part of the job. So any help would be most appreciated!
Much thanks!

Apply the color correction to one clip and adjust as needed. Copy the clip. Select all other clips that you want to apply the filter with those settings to. Right-click on one and select Paste Attributes/Filters.
-DH

Color Correction changes when Canvas is re-sized?

I have an Apple Cinema Display 22 inch (pre-HD model) and am working with some DVCPRO-HD footage that has been turned black and white using the 3-way CC filter. We wanted to do a quick pass on it and get the contrast as consistent as possible before we spend the money going in somewhere with an HD CRT (hopefully) for the final 'contrast tweaks'. My question is this: When the project is arranged in a 'Color Correction' layout, the 'Excess Luma' range check gives us a green check mark on certian clips; however when the canvas is stretched and re-sized to give us a bigger viewing area, we get an 'exclamation point' on the same clips -- even though the dots still look the same (good) in our waveform monitor. Why does re-sizing the canvas -- making it bigger -- violate the range check? That shouldn't bel. Should we just ignore it, and pay attention to the waveform monitor?

My guess is that when you expand the window, you reveal ALL of the pixels or something, and if the image is at 100%, you should be able to rely on the range checking tool report.
Jerry

Color correction applied to multiple clips

When using FCPX, is there a way to apply a color adjustments to all the fragments of the same clip? Or is there a way to batch edit clips without actually having to do all your color correction before editing?

Hi,
google Adjustment Layer for fcpx and you'll probably find a free one, or simply make one yourself if you have motion by creating a title effect, but remove the text item. Put in the correct folder for it to show up in the Title effects broswer and then simply add it to the timeline above all the other clips. Add colour correction or any other effect you want to it. it will effect everything under it.
hth
adam

Batch Color Correction Change

What is the best method for changing a whole roll of photos that need color correction? I have iPhoto 6 and Photoshop CS. Would there be a way to make those changes in Photoshop, and than reimport those changes back into iPhoto to replace the noncorrected photos? Im not very effcient at photoshop so step by step would help the best. Or other suggestons or applications that will do the trick quickly and easily are welcome too...
Thanks In Advance,
Hintzer

Hintzer:
You can batch change 4 photos at a time in iPhoto with PSC2 and not have to reimport. I can't help you with batch processing with PSC2 as I've never done it. But if you work out a workflow you can open 4 photos at a time using PS as the preferred editor in iPhoto.
Outside of iPhoto you could do as many as you'd want with PS. If you do batch correct the original files in iPhoto's Originals sub folders and then replace them with the corrected version you'll have to do a library rebuild and rebuild the thumbnails in order to see the changes reflected in the thumbnails. The changes will show in the full sized image in iPhoto without the rebuild.
What color corrections are you finding you need to do?

Is there a way to create a table then apply it to other sheets and have it mirror changes across all the sheets? Like a sync'ed table that will be the same on multiple sheets

I have a budget spreadsheet with a couple recurring tables. As months go by, I sometimes make changes to these tables and would like those changes to be synced across the different sheets in the spreadsheet. Is there a way to sync content across multiple pages, essentially having one true table that appears on multiple sheets?

Abdur,
In the sheet :: table :: cell that is going to receive the data, type an equals sign, then click on the cell that the data will come from and press Return.
This will require that you navigate to the origin cell by choosing the proper sheet.
Jerry

Added a song to a movie in imovie and lost all audio across all clips. Any help?

I added a song to a movie in imovie and lost all audio from several clips. Removed the song and audio is still gone. How can I regain original audio once lost after adding song to imovie?

The audio should still be there. Select a clip and open the Inspector to the Audio Tab and turn the volume up to 100%.

Color Correcting Help!

I shot a bunch of timelapse clips (12 and 15fps) with two GoPro3's and transcoded them in the GoPro software, Cineform Studio, because PP5.5 apparently does not natively handle MP4's. I made them universally 1080 and 29.97fps AVI's for import into Premiere 5.5 (on my mac).
While doing so, I also did minor color corrections. However, as I start to lay them side by side in Premiere I see that I did a poor job and that they look very different.
As a result, I have two problems:
1) I have no idea how to use Premiere's color many correcting tools.
2) Assuming I can figure a tool out, if I must correct each clip in the sequence individually, then there is no reason why I will not again make them all look different from each other.
Is there a way to make all the clips conform to a target value, with each changing the appropriate amount from it's own, current values to match it? For example, can I take one clip, adjust it's values (basically just white balance, brightness and contrast), and ask the rest to match it regardless of how close or far they currently are from it? I hope I've asked this question correctly.

The Three Way Color Corrector is probably the
most intuitive CC effect for a beginner in a hurry.
Here are a couple of short tutorials:
Three-way Color Corrector effect (CS6)
http://helpx.adobe.com/premiere-pro/using/three-way-color-corrector-cs6.html
Using the Three Way Color Corrector
http://www.video2brain.com/en/lessons/using-the-three-way-color-corrector
You can copy > paste the Three Way Color Corrector effect
from one clip to another as a starting point for additional clips.
Also, you can use an Adjustment Layer to apply a single
color correction effect across multiple clips.
Here's a short tutorial + documentation:
Using the New Adjustment Layers in Premiere Pro CS6
http://tv.adobe.com/watch/cs6-creative-cloud-feature-tour-for-video/using-the-new-adjustme nt-layers-in-premiere-pro-cs6/
Adobe Premiere Pro Help / Adjustment Layers (CS6)
http://helpx.adobe.com/premiere-pro/using/help-tutorials-adjustment-layers.html

Color Correction wanishes

Hi.
I have a strange problem with my latest project regarding color correction changes. All of a sudden i can not make perminant changes in the color section, I use to but not any more. The old changes are in place, but if I make some new ones, the can be seen and the stay in place until i quit the app. When i restart the app, they are gone.
Everything renders fine, i can export the video with the changes as long as I dont restart the application.

Update.
It seems that the fix was to consolidate the whole event. I deleted all render files, copied the whole event and did a consolidation of everything. It looks like it is working again.

Color correction/effects when working with long clips

Hi,
First time poster!
I'm a beginner with Adobe Premiere Pro 5.5. I'm using it right now to do some color correction on badly produced DVD's in my film collection! I was wondering if it is possible when doing color correction effects on a clip if you can apply different effects to different parts of a clip. For example - At the beginning of a clip, the scene is really bright, but, some 30 minutes later, the clip is really dark. Is it possible to darken the beginning and lighten the ending? How would you folks deal with a situation like this? Would you edit the film down to smaller parts? If so, how would you go about that?
Thanks for the help!
Howard

Howard,
Welcome to the forum.
Along with Jon-M-Spear's suggestion (the one that I use most often too), many Effects can be Keyframed, so that they change over time. However, this does take some time, and can involve a lot of fiddling.
If you have a long Clip, and know that you will be adding the same set of Effects, but just with different attributes, you can do one of two things, and both rely on Jon-M's method:
You can create an Effect Preset, and apply that to all of your Cut, let's call them "sub-Clips," even though that term has other meanings, so be careful when using it. Then apply that Preset to all of those sub-Clips. Then, tweak each application of the Preset, as is needed for the individual sub-Clip.
In a similar fashion, you can apply all necessary Effects to the first of your sub-Clips, tweak for it, as is necessary, then Rt-Click on it, chosing Copy. Now, Select all of the rest of the sub-Clips, to which you wish to apply that set of Effects, Rt-Click on them, choosing Paste Attributes, and then tweak, as needed.
A variation on the above would be to apply the Effects to the origianal Clip, and THEN make the Cuts. Go back and tweak each individual sub-Clip.
Good luck,
Hunt

Add keyframes color-correcting a clip

I'm using Final Cut Pro 10.1.4 on an iMac with Yosemite 10.10.1.
When I try adding multiple sequential color corrections in a single clip, there is no way to add keyframes to each correction.
In the video inspector the add keyframe symbol does not appear.
In the show video animation window, if I clik "control k" the keyframe symbol does appear, but if I add more than 1 keyframe only the last one is active, so I can only correct the entire clip.
Is there any way to add more than 1 sequential correction using keyframes, instead of cutting che clip into multiple segment and correcting each one of them?

I have an RGB Channel Mixer that can be keyframed.
First, I recommend turning on Video Scopes (RGB Parade) and turning off the Color board for the title (you do not want to accidentally color grade the title).
RGB Channel Mixer is a title effect, so just drag it over the region you need to color "mix". You can use this effect in conjunction with the color board for the storyline clip. (Do not color correct the channel mixer!
You can toggle the view with the channel mixer selected — type 'v'.
You can download it here: RGB Channel Mixer
It won't hurt to try it and if you don't like it - just delete it. (It's still a bit of an experiment at this point.)
The effect works by mixing the red, green and blue channels separately against a black background solid. The Amount values use opacity to change the mix. The Boost values are different. They add a little "gain" in the channel. There's a subtle difference between the two. Contrast and Brightness controls are added to help with the lack of range assist (shadow, mids, highlights).

Color correct clips before making muliticlip?

Hello,
I would like to color correct my three camera clips before making a multiclip to save time, but the video scopes will not allow me to see my changes when I color correct. I have to drag each clip to the timeline and color correct each clip before I see modifications to the videoscopes. Even then, I have to use only the clips in the browser to make the mulitclip. Is there a more efficient process to put my clips through a filter(s) process (ie..color correction, de-interlace) before making a multiclip?
Thanks,
Jordan

Hello Andy,
Yahoo! Thank you Andy for your information. You just saved me a lot of time. Cheers!
Jordan:>)

Apply Color Correction to next clip

I'm pretty sure I was able to do this about a month ago. I originally found how to do it in the help index, but I cannot find it now.
I'm looking to apply my color correction to the next clip in the timeline. Just like in FCP7, you were able to apply it to the two (or one) clips behind or in front of the clip you're using the CC from.
Thank you.

We don't have the same privelidges in this area that we enjoyed in FCP7.
The best you can do is select the corrected clip and hit Cmd+C to copy it.
Then select the clips you want to apply the same correction to and press Alt+Cmd+V to Paste Effects.
Note:
If you already have any effects on those clips, they will be overwritten.
Andy

Color correction change across all clips?

Similar Messages

Maybe you are looking for