Color correction filters do not APPEAR to work
Hi All,
I have been working FCS as long as it has been around and have just come across a strange issue:
I apply a Color Correction filter (does not matter which one)
-In the Viewer screen the filter appears and i can move the adjustments
-The render Bar changes color in the timeline
-No color correction appears to take place in either the Canvas window or the scopes.
Here are my sequence settings:
Compressor: Apple Prores 422 (HQ)
Quality 100%
Render all YUV material in high-precision YUV
Process Maximum White as Super White
Motion Filtering Quality Best
Render Frame rate 100%
Resolution 100%
Codec same as Sequence Codec
My Computer setup is listed in my Profile.
Latest FCS, latest OS
Any clues?
Thanks!
Studio X is exactly right. I've tried the Bunnahabhain solution and it works. Why? I have NO idea. How an inanimate object (Mac computer and FCP software) can "heal thyself" overnight is beyond my comprehension. Anyway, in the end, I'm sure only Steve Jobs knows the answer and he put a block on my calls. So the only thing I can add is that the key is the Bunnahabhain. Under NO circumstances should you substitute the Bunnahabhain. I did and was beaten soundly by a couple of undercover "Geniuses" from the Apple store.
Another helpful thing is to NEVER sit down in the presence of your Mac with a negative attitude toward it or Steve Jobs. I promise you it can sense it and it will punish you. Clear your mind of negativity and become one with the universe BEFORE you begin to edit on a Mac. This is imperative. No one asked you to join the cult. Like it or not, you're in it now and there is NO escape.
Similar Messages
-
exception-type in web.xml does not appear to work
WLS 60 SP1 (#101616)
<exception-type> in web.xml does not appear to work. WLS shows standard
"Internal error 500" page instead of a custom error page. The custom error
page is shown if <error-code> is used instead of <exception-type>.
Any ideas? Thanks
Can you show me some of your code? This works for me.
Also, you say that you are working with 6.0sp3. Are you sure? sp3 hasn't been
released yet, except in a very limited beta. (I believe only internally, but I
could be wrong about that.)
David
[email protected] wrote:
Hi all,
I have created a very simple servlet and an index.html file with a link
to it, then packaged it into a WAR file with the appropriate web.xml and
ias-web.xml files. I then created an application.xml file referencing
only this servlet and adding a context root. After deployment via
"iasdeploy deployapp simple.ear" and cycling the web server, I can reach
the welcome file (index.html) correctly
-"http://localhost/NASApp/simple". When I attempt to follow the link to
the servlet ("simple servlet") the URL ends
up as "http://localhost/NASApp/SimpleServlet" whereas it should be
http://localhost/NASApp/simple/SimpleServlet If I type that url in, the
servlet executes fine.
I've deployed this into Tomcat and get the behavior I expect. It appears
that the element in the application.xml file is ignored by
iAS.
I'm using iAS SP3 on Win2k (same problem on NT).
This is such a basic behavior that I can't believe this is an existing
bug. I must be doing something wrong...
Any ideas?
Thanks in advance,
-Glen
Files are attached.
Name: simple.ear
simple.ear Type: application/x-unknown-content-type-ear_auto_file
Encoding: base64
Description: filename="simple.ear" -
Hashmap containsKey() method does not appear to work
Hashmap containsKey() method does not appear to work
I have an amazingly simple custom class called CalculationKey, with my own amazingly simple custom equals() method. For some reason when I call my containsKey() method on my HashMap it does not use my defined equals method in my defined key class. Do hashmaps have their own tricky way for establishing whether two keys are equal or not?
THIS IS MY AMAZINGLY SIMPLE CUSTOM KEY CLASS
private class CalculationKey
private LongIdentifier repID;
private LongIdentifier calcID;
public CalculationKey(LongIdentifier repID, LongIdentifier calcID)
this.repID = repID;
this.calcID = calcID;
public boolean equals(Object o)
CalculationKey key = (CalculationKey)o;
if (key.getCalcID().equals(calcID) &&
key.getRepID().equals(repID))
return true;
else
return false;
public LongIdentifier getCalcID()
return calcID;
public LongIdentifier getRepID()
return repID;
THIS IS MY AMAZINGLY SIMPLE CALLS TO MY HASHMAP WHICH ADDS, CHECKS, AND GETS FROM THE HASHMAP.
private Hashmap calculationResults = new Hashmap();
public boolean containsCalculationResult(LongIdentifier repID, LongIdentifier calcID)
if (calculationResults.containsKey(new CalculationKey(repID, calcID)))
return true;
else
return false;
public Double getCalculationResult(LongIdentifier repID, LongIdentifier calcID)
return (Double)calculationResults.get(new CalculationKey(repID, calcID));
public void addCalculationResult(LongIdentifier repID, LongIdentifier calcID, Double value)
calculationResults.put(new CalculationKey(repID, calcID), value);
}....cheersYou can make a trivial implementation to return a
constant (not recommended)What do you mean by that? Hmm.. I guess you mean that
you shouldn't use the same constant for all objects?
But don't see the int value of an (immutable) Integer
as constant?
/Kaj
You can write hashCode to just always return, say, 42. It will be correct because all objects that are equal will have equal hashcodes. Objects that are not equal will also have equal hashcodes, but that's legal--it just causes a performance hit.
The value is that it's really really simple to implement: public int hashCode() {
return 42;
} So you can use it temporarily while you're concentrating on learning other stuff, or during debugging as a way to confirm that the hashCode is not the problem. (Returning a constant from hashcode(), rather than computing a value, is always legal and correct, so if something's behaving wrong, and you replace your hashCode method with the one above, and it still breaks, you know hashCode isn't the problem.)
The downside is that you're defeating the purpose of hashing, and any non-trival sized map or set is going to have lousy performance.
For a decent hashCode recipe, look here:
http://developer.java.sun.com/developer/Books/effectivejava/Chapter3.pdf -
This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I created. I am logged in as myself and it states that I am an "Admin". The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users.
Can someone help me? I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on? What if this were my child? This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
Any help would be appreciated. (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
Thanks.Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.
-
GetColumnAt(index) does not appear to work
I am attempting to place a simple Icon in a dataGrid using
cellRenderer. My problem is that
'myDataGrid.getColumnAt(index).cellRenderer' does not appear
to work. Most of the forum examples create arrays with AS and don't
show this example. I already use XMLConnector (which works fine)
the problem is referencing a column after the fact. I can do this
when creating column smanually but not using getColumnAt(index).
My code block:
import mx.controls.gridclasses.DataGridColumn;
import mx.controls.gridclasses.DataGridRow;
import mx.core.UIComponent;
playlist_dg.cellRenderer = "IconCellRenderer";
playlist_dg.getColumnAt[3].cellRenderer = "IconCellRenderer"
Any help is appreciated. cellrenderer is a bit hairy
Mitchthis is either a blindingly stupid question (for which I
apologise) or a legit bug. Either response would put my mind at
rest.
Thanks
Hillcreative -
Msi gt70 2PE integrated HD 4600 graphics HDMI port does not appear to work.
Hi guys,
I have the GT70 2PE with integrated hd 4600 graphics and with a dedicated nvidia geforce gtx 880m card. The HDMI output does not appear to work.
I'm tech savvy and cannot figure this out for the life of me. have tried nearly everything.
lets start from the low level troubleshooting done:
- plugged in the HDMI cable from a working computer that has HDMI hooked up to it. This did not make a difference from the new cable I bought for hooking up my TV to my laptop.
- booted the laptop up and do not see a duplicate screen outputting via HDMI, all my video cards in my PC's I've built prior have always shown the HDMI output as a duplicate screen when I had a monitor hooked onto a PC. This makes me believe the HDMI port may be disabled/broken as there is no HDMI output at POST. Only the laptop monitor displays output.
In Windows 8.1 I've installed the latest 4600 drivers and nvidia 880m beta drivers.(even though installing nvidia drivers shouldn't matter since I've read the HDMI output is tied to the 4600 integrated graphics chip, also if during POST the HDMI output never showed up on my TV, then installing the latest intel graphics drivers shouldn't have made a difference either, which it didnt make a difference).
I've tried disabling the integrated graphics card then re-enabling it, as noted on the intel forums. - does nothing.
what I've ruled out:
-HDMI cable issues = no issues due to other PC's and devices working with the cables. All cable tests are direct connect to the TV, no intermediary devices such as hdmi splitters etc.
-BIOS has zero options for graphics card options.
Any ideas before i RMA this laptop? I'm at a loss.OP's problem has been solved. Also please don't resurrect and do not hijack other people's topics. Open your own one.
>>Please read and comply with the Forum Rules.<<
Topic Locked -
Crystal 8.5 (Minimum function in the function tree does not appear to work)
HI I would greatly appreciate some help with this problem I am having.
I am creating a report in which there is a group of records printed . Within each record there could be any number of results related to that record of which I want to extract both the maximium and minimum value and print these. This bit is fine as I do this using the maximum and minimum function available within the summary function.
However with each of these max and min values calculated and printed I then want to create a footer that adds all these max and min values up. (This is not immediately possible using the 'summary function' max and min values as they are not presented on the 'Field explorer' dialog box for selection.
However I can individually using the maximum 'tree function' get the report to store these values so that I can do the calculations once I have got to the footer (as the fields defined are accessible through the field explorer. But the same minimum function does not appear to extract a result (and no I do not have zeros in the data).
Is there a known problem with the minimum function?
Is there another way of getting this data?
Thank you in advance
seyvivHi Debi, it would be easier for mean to demonstrate what I wnat/am doing in the report by use of data.
I have a file with a list of sample results. There may be many results for one sample. ie
Sample Result Number Result
98-01 1 3
98-01 2 5
98-01 3 6
98-02 1 3
98-02 2 7
98-02 3 9
98-03 1 4
98-03 2 5
98-03 3 11
On the first page I want to see the max and min values across all samples listed for each result number. Then as a total value (once all the result numbers max and mins are displayed I want to perform a calculation on the max and min values displayed in the list (ie. max 4 + 7 -11 and for min 3 + 5 - 6)
Result
Number Max MIn
1 4 3
2 7 5
3 11 6
Result of 0 2
Calculation
I have been able to do this for the max values but the minimum function does not work.
How I currently extract this data is that I use a 'Summary field ' to calculate the max and min values in the list. However to get the data for the calculation at the bottom I use the 'Formula fields' to extract the values listed for all the results for 'result number 1, 2 & 3' and then use the 'Function tree' to get the 'Maximum value for each individual result number and then finally do a calculation on the max values. However, the same minimum function does not appear to work.
I hope this explains what my problem is.
Thank you in advance of any suggestions you may have
Regards
Viv -
'Find' function does not appear to work in TextEdit on .txt documents
Most of the time the 'Find' function on the TextEdit application does not appear to work on .txt documents. I have verified this by using Find on words that I know are in a document, and it cannot find them. I've tried different options on the 'Find' function without success. This appears to have started with version 10.6.8. Has anyone else had this problem since upgrading to 10.6.8?
Thanks -- but I swear it worked fine prior to either the 10.6.7 or 10.6.8 updates and now it doesn't. I'll just keep experimenting and playing around with it and see if I can get it to work. Maybe the new Lion O.S. coming out will fix it, although I'm not going to rush -- I made the mistake of putting Snow Leopard on right after it came out and had problems with some programs not working properly anymore (like Pro Tools, for example). Always a good idea to hold off until most of the bugs get fixed.
-
SATA 3 and 4 do not appear to work
Hi,
I just purchased a new WD 320GB HDD to accompany my other 2 WD HDD but for some reason SATA slots 3 and 4 do not appear to work or there must be some way you have to enable them. It is definitely not the new HDD as it works in the other two SATA slots. Any help would be appreciated in getting this new HDD installed.
RegardsOkay reading the manual is a good thing I have discovered. It was 2 and 4 that werent working but it was because of a BIOS setting. I have now changed integrated peripherals to SATA only and all 3 HDD now work fine. My problem now is that the 2 CD/DVD drives that I have are now invisible. Does SATA only turn off the IDE function altogether? Any solution greatly appreciated.
Regards -
Sales document number not appearing in Work Item.
Hello gurus,
I have created a WorkFlow for approval of Sales order. My problem is, the sales document number is not appearing in the WorkItem for user decision task. I am passing container variable the sales document number in the Parameter1 of the User Decision task of the work flow. Value is populated correctly in the container variable for sales document number, but fails to appear in the work item content in SBWP.
Please suggest a solution.
Regards,
Dnyanesh.Hello All,
Thanks for your reply.
I am passing the value of sales document number in parameter 1 of the standard task for approval as below.
But in my Business Workplace I do not get the Sales document number. Below is the screenshot.
Regards,
Dnyanesh. -
Use this mailbox for Junk does not appear to work in Mail 4.2.
Hello, all:
Have been using 10.6.x since it came out on my previous iMac [24" Early 2008 model]. Went with a fresh install of 10.6.3 on the new iMac [27" i7], and ported data over.
The only problem that I've had is that setting the Use this mailbox for Junk command in setting up Mail 4.2 does not seem to work. I've closed Mail and looked at ~/Library/Preferences/com.apple.mail.plist, and the correct mailbox name is indicated for the two accounts [IMAP and GMail over IMAP] where I'd like to do Junk Mail filtering. However, there is no centralized Junk Mail filter, which is really annoying me.
I didn't have this problem previously in Mail 4.x, and I'm expecting that it's a bug specific to 4.2, which I haven't seen in my previous incarnation because I did the import from 3.x->4.0, and the prefs carried forward correctly from 4.0->4.2.
Anyone else running into this, and is there anything else I should be looking at? Am I explaining the problem such that it's clear what I'm asking?
Thanks,
GeofI figured out the problem (for me, anyways). In Preferences > Junk Mail, make sure Junk filtering is enabled and make sure the "move it to junk mailbox" radio button is selected.
-
Agent not installing correctly and host not appearing in console
Hi,
I encounter troubles with agents on some servers running Red Hat Enterprise Linux ES release 4 (Nahant Update 5).
*1)* The install script doesn't run correctly. It hangs after some times
install.log :
11-21-2007 17:37:05> check rpm with rpm -q rpm
11-21-2007 17:37:05> Checking if user is root
11-21-2007 17:37:05> Checking UCE upgrade
11-21-2007 17:37:05> rpm -q sun-uce-agent
11-21-2007 17:37:05> CMD: rpm -q director-agent
11-21-2007 17:37:05> checking /opt/local/uce/agent//bin/.uce.rc
11-21-2007 17:37:05> /opt/local/uce/agent//bin/.uce.rc was not found
If I install the rpm manually, the packages is successfully installed. I then just copy the .uce.rc file at the correct location.
*2)* On those servers when the agent it running, it fails to connect to the SDS with this error in the error.log :
29739:2007-11-21_17:01:13 ERROR [ default_logger: source_unavailable: #0 ] 17236224 Failed to initialize application. Check that you entered passwords and keys correctly.
Any idea of what could be done ?
Best regards,
Fred. OgerHi,
Still don't know why the agent installer doesn't work correctly, but I found the reason of the host not appearing in console :
The uce.public file had to be installed in /opt/local:uce/agent/bin -
Color Correction Effect Controls Not Showing Controls
The recent upgrade seemed to work flawlessly until I tried to go back to some color correction I had started earlier. In some cases, when I click on the Video Effects tab in the Color Correction workspace, my controls are there and working. For others, when I click on the Video Effects tab, there's simply nothing there. I have dragged effects back onto the clip and then gone back to the Effects tab, and still see nothing. Has anyone else had this problem? Any thoughts?
I have the same problem. I've tried removing all effects, adding more effects etc, but in the Effect Controls window all I get is the name of the clip highlighted in blue. I've also gone to Window and selected Effect Controls, but all this does is reveal or hide the Effect Controls tab. The Motion, Opacity etc controls are not there when I click on the tab. Anyone have any ideas how to get the Effect Controls back?
-
I don't see my color correction filters?
Hello again,
I'm working with a subclip that I created from a capture that I made from my video camera and I am having trouble finding the color correction tools that were available when I went through the Color Correction tutorial. I opened up my video in the viewer and switched to the Color Correction window layout. In my viewer I have the following tabs, Video, Mono (a1), Mono (a2), Filters, and Motion where I can't find any of the settings for brightness or RGB control. How do I find these controls?
ThanksHave you added the 3 way color correction filter to the clip?
Effects>Video Filters>Color Corrector 3 Way.
x -
HRMS Button not appearing in Work Center
Hi friend,
As we have HR module here, we have a requirement of maintaining the Personal number and work center link.
But in the Transaction code IR01,02,03 HRMS button is not appearing.
Whether any setting missing especially from HR side anything missing?
Pls guide me on this.
Regards,
krishnaHi
check the config in OIZU transaction, make sure that screen sequence for HR assignment is maintained
Mneu path:
PM>>Maintenance Plans, Work Centers, Task Lists and PRTs>Work Centers>Configure Screen Sequence for Work Center
Regards
Seenu
Maybe you are looking for
-
NO sound on HDTV connected to iMac
I'm trying to connect my iMac to my Panasonic HDTV (model TH42PZ80U). I've connected an Apple Mini DVD-to-DVI cable to a DVI-to-HDMI cable. Then I'm connected to HDMI port 2 on the TV. Video from my iMac is working great on the HDTV! However, when I
-
Prevent/Remove Download Photos in slideshow
How do I prevent the onscreen "Download" option from appearing at the top of a photo gallery? Selecting None in the Inspector does not influence the way a gallery behaves. Thanks
-
I want to build/append to an array. Let's say the length is defined at 10 elements. When the 11th element comes in I want the first element to be kicked out so that the array always has the most recent 10 elements in it in order. the arrays should lo
-
Where can I download Premiere Pro CC 2014.1?
How do I get the 2014.1 for pre pro cc? Message was edited by: Kevin Monahan Reason: Needed a better title.
-
When I input song information into "get info" for each of my songs, some do not save when I close my Itunes. When I click on the song the correct info pops back up.Why?