Color correction in IM6 or plugin advice?

Hello All,
I have several hours of video from 8mm films that I have filmed with my DV camcorder. The quality is pretty good, but I would like to run it through some kind of color correction or optimization.
1. Has anyone done this in IM6? Is it possible?
2. Has anyone used any plugins for this sort of thing?
3. Does anyone know of any third-party software I could run my video through and then save as .mov for import into IM6?
Thanks for sharing your expierence!
Adam

iMovie has hue and white balance adjustment although they are a bit tedious to work with. Even with plug-in from GeeThree it will take a while and I am not sure if they work with V6 yet. Slick 3 has the color correction you are looking for
But if you have a lot of footage and want to do a good job there is little better than the 3-Way color in Final Cut other than having someone with PRO equipment do the conversion and correct the colors on the transfer.

Similar Messages

  • Color correction hardware advice

    Hi all,
    I've been a video editor by trade for the past 3 years or so, but have only finally gotten around to investing in my own personal studio. I recently purchased a MacPro and am looking into broadcast monitors for color correction.
    The main question deals with Intel compatibility and the hardware out there.. I'm curious what other user's experience has been. I'm going back and fourth between a Blackmagic card and a deck like a DSR-11. Anyone have any advice? The big thing to keep in mind is that I've been editing in-house at the companies I've worked for and have little experience setting up hardware. Thanks in advance!
    cheers,
    Adam Weinberg

    hi Adam
    its not all happening in the box alone. if my understanding is correct, you also install drivers which hook into the system to manipulate the DVI output in order to provide the necessary signal to the device. similarly, the drivers, allow FCP to hand off some of the processing to the extermal device, hence the hardware acceleration.
    not sure this is the option you want though. if you're trying to set up a home studio, you may be better off looking for a suitable Decklink or Kona card as they will offer you far greater options for both input and output .
    cheers
    Andy

  • Color Correction plugin for Premiere Pro CS3....

    Hi,
    I'm looking for a plugin for color correction in Premier Pro CS3.
    I checked out the Color Correction tools that ship with Premiere (which are nice) and I checked out Synthetic Aperture's Color Finesse 2 (which is great as well).
    Are there any other recommendations ? ;)
    Thanx for your help in advance !
    Mike

    I've not used it, but Magic Bullet Colorista is one option.

  • Color correcting advice

    Hi everyone,
    I have absolutely zero experience with color correcting, but a project that I am working on seems to be in desperate need of it. I am wondering if anyone here can walk me through some steps to get this looking better?
    One camera was shot with a panasonic P2-- here's a snapshot:
    http://www.collinatorstudios.com/www/tp2.jpg
    On a monitor especially, the colors are more on the blue side, the black of the clothes are very black...
    The other camera was show with on minidv-- here's a snapshot:
    http://www.collinatorstudios.com/www/tminidv.jpg
    This one appears to have more red in it.. so blues are a bit more purple, and there is a lot more gray in the black...
    So I just would love it if someone could tell me what plugin(s) they would recommend to correct this, and even what settings on the plugin might fix this. I was messing with the built-in color tools but couldn't seem to get the results I was going for.
    Thanks.

    If you can't afford him...I am available for a BIT cheaper...but note that I am not as good.
    OR...you can buy this tutorial DVD and see what you can do:
    http://www.rippletraining.com/colorcorrection_for_final_cut_pro.html
    But nothing will match what a pro can do. But if you must do it yourself, this is a great DVD.
    Shane

  • PS CS3 Color Correction plugin

    Hi,
    I've been doing a lot of color correction/adjustment lately in Photoshop CS3, Premiere Pro CS3 and After Effects CS3.
    In Premiere Pro CS3 and After Effects CS3 I work with a plugin from Synthetic Aperture called 'Color Finesse' which is just so amazing to work with.
    Unfortunately they don't offer that plugin for Photoshop.
    I am looking for a Photoshop plugin that can provide the same depth and ease of use.
    There are two things that I like especially in Color Finesse:
    1. that u see the graph of each color channel (Master/Red/Green/Blue) aligned UNDER each other ALL the time
    2. specific color channel correction/adjustment via RGB, CMY & YCbCr. Especially YCbCr is so powerful.
    Is there a plugin for Photoshop that provides the same options ?
    I worked with PS Curves, Curvemeister 3 & Power Retouche Pro but they don't provide the powerful controls and ease of use.
    Thanx for your help in advance !
    Mike

    I've not used it, but Magic Bullet Colorista is one option.

  • Color Correction Advice Needed

    Hi all -
    Below is a screen shot that is typical of my sequence:
    I've applied the Three-Way Color Corrector and have been able to make minor adjustments here and there, but my main concern is the washed-out front man. I can't seem to bring any detail back into his face, front of his shirt, etc. I think I've adjusted every available control in the color corrector; just probably not in the right combination.
    Any advice on how to deal with this?
    Thanks.
    Ed

    Along with Craig's suggestion, I would also apply Shadow & Highlight, BUT make sure to uncheck Auto - you do NOT want that! Adjust, after the Levels, and be prepared to go back to Levels (not Auto Levels), for some tweaks. Note: the order of many Effects will have totally different effects on your footage. I recommend Levels first, and then Shadow & Highlight, but do not be afraid to switch those tow. After you are done, then the 3-Way Color Correction would be my next step, with maybe Neat Video to remove some noise. Be aware that Neat Video WILL up your Export times. Keep going back and making tweaks. Also, a calibrated NTSC (or PAL) CRT monitor, hooked up via FireWire and a pass-through device, will be your best test. Program Monitor is but an emulation.
    Good luck,
    Hunt

  • Advice for logical workflow for color correcting and color grading

    I am an experienced user of  PPRO CS5.  I am a novice with color correcting and color grading.  I am also just barely competant in AE CS5.  It has been suggested that I use AE for color correcting my footage.  Can you advise me as to the most logical workflow for doing this in coordination with PPRO CS5?  Are there some tutorials that you recommend?  I subscribe to Lynda.com and I think that they have some great tutorials, I am unsure as to where to begin looking and what to search for.
    Thanks so much,
    Lisa

    lisaellensegal wrote:
    I am an experienced user of  PPRO CS5.  I am a novice with color correcting and color grading.  I am also just barely competant in AE CS5.  It has been suggested that I use AE for color correcting my footage.
    You can do it that way, sure. But you don't have to. You can accomplish quite a lot without leaving PPro. This has two major advantages. First, if you aren't using AE for anything else, it gets you out of using AE at all, so gets you out of climbing another set  of learning curves.
    Second, even if you are using AE for other things (I use AE to make motion lower thirds, for example), doing the work in PPro can improve exporting speeds. This is because AE gets restricted to a single processor core in some workflows as discussed in this thread and others (search around if you're interested). This can make exporting take 3x as long or longer, depending on how much footage has to be processed by AE.
    So, how to do color correction without leaving PPro? Use either a luma corrector or luma curve effect to set black and white points, and contrast (use a waveform monitor to help). Then use a three way color corrector effect to get rid of any residual color casts (use the vectorscope to help, and the RGB parade, etc.).
    If you find you have specific colors that need to be fixed, you can apply another three way color correction effect and use it to make that secondary color correction (for example I find the blue dyes used in many labels tend to fluoresce under fluorescent lighting, and has to be desaturated with a secondary color correction or it "blooms" on an HDTV -- IOW, it has to be made "broadcast safe").
    If you want tutorials for using these tools, the ones on Creative Cow by Andrew Devis are quite good, and free. The ones on color correction with PPro cs6 start at tutorial number 47. There's a bunch of them. All good.
    Finally, get a copy of Van Hurkman's Color Correction Handbook. May be the best technical book I've ever read, and it'll certainly point you in the right direction for doing color correction work regardless of which tools you use to do it.

  • Premiere Pro CS3 then After Effects CS3 for Color Correction?

    Hello All,
    I'm at a bit of a loss here, it seems like it's a no brainer to be able to do this. I'm trying to edit my film in Premiere and then use After Effects to do color correction using Color Finesse 2. But there doesn't seem to be ANY way to keep a project so you can continue to edit in premiere while you also keep all your color correction??
    You can do color correction in AE and export a premiere project but premiere won't recognize the Color Finesse Filter so you lose all you color correction!
    Or I can edit the whole project in premiere and open it in after effects to do color correction, but then if there is a single edit change that needs to be done in premiere again i've once again lost my Color Correction to bring it back.
    Is this really the case that I can't use these expensive packages together this way? It seems like there has to be a solution! If Adobe just made it so Premiere kept the "links" to your filters in the project, instead of killing an unrecognizable one. Then when you opened it back in after effects after your edit your Color Correction would still be there.
    Any one have any advice?
    Thanks,
    -Ethan

    Thanks for all the suggestions guys, all good ideas.
    Aanarav, Your idea to just get Color Finesse for premiere I suppose I could do. It's $545 which isn't exactly pocket change, but it would probably be worth it, if there is another way other than breaking the bank book for software I already own i'd like to try to get away with it.
    Steven Gotz
    Dynamic link is unfortunately a feature only of the production studio package which is like $1100 upgrade from what I have...so that's kinda out of the question for me.
    Jon Sands
    Great idea here. I really thought it might work since premiere seems to use what are called after effects plugin files too. But after copying and pasting for a while it doesn't look like it actually sees it as a plugin anywhere I paste it. :( If anyone knows of a way to get that to work I would be seriously grateful!
    I guess it sounds like the only way out is to spend cash, sigh such is so often the case is seems.
    -Ethan

  • Secondary color correction not working in Premiere CC

    Greetings,
    I'm unable to build secondary color correction masks in Three Way Color Corrector, RGB Curves etc in the current version of Premiere CC.
    In any of these plugins, when I check "show mask" I get the usual white slate filling the frame. But when I use the color picker to make a selection the whole frame stays white. It appears that I'm making selections but it's not building the mask for some reason. When making an extreme color change I can see that the mask is not building as it affects the whole frame.
    This started after upgrading to CC. I've recently updated to the most up to date version (yesterday) and am still having the same problem.
    Premiere CC 2014.1 Release
    8.1.0 (81) Build
    Macbook Pro Retina, 15" Late 2013
    2Gh Intel Core i7
    8Gb
    Intel Iris Pro 1536Mb
    Yosemite Version 10.10
    *note-my Colleague is not having this problem, he's working on the same OS and same CC build but he has an Imac. So I'm guessing this problem is unique to my hardware config.
    Anybody else have this problem or know of a fix?

    I have the same Problem new MAC OS Premier Pro CC or Premier Pro CS6 both have an issue with the Title Tool. If you open the title tool and try to make color changes or change size of the font it sticks at the default color and default font. SOmetimes the title tool will work and then when I exit it's back to the default first type location, default font and default color. Sometimes it will not even let me exit the Title Tool.
    Please help I have Projects I'm working on Deadlines and I pay a monthly Fee for Software that works and it's not working.
    Model Name:          Mac Pro
      Model Identifier:          MacPro5,1
      Processor Name:          6-Core Intel Xeon
      Processor Speed:          2.4 GHz
      Number of Processors:          2
      Total Number of Cores:          12
      L2 Cache (per Core):          256 KB
      L3 Cache (per Processor):          12 MB
      Memory:          16 GB
    Software  OS X 10.9 (13A603)
    Graphics  ATI Radeon HD 5770 1024 MB

  • Configuring an external Monitor for Color Correction?

    I currently have my Mac Book Pro 17in connected by the mini DV port and one USB port to a Mac 30" Cinema Display for editing on FCP7. I use it in a two monitor configuration with my Bin on the laptop screen and the FCP interface on the Cinema display. This works well for me.
    I also have an external ESata drive via PCI slot. I would like to connect an external video monitor as well for quality checks and Color correction purposes. I am also looking for advice on what sort of external video monitor I should get and how would I connect it to the laptop or via some external third party device. I would be hoping to use a video monitor connected via a hdmi connection. Most of the work I do is supplied on drives, original material EX3 or Canon and some on HDV (Camera) that I ingest via Firewire800. Many thanks in advance.

    Sorry Mark, you can't always have everything ... with the Matrox MXO2 (or similar, like Motu HDX-SDI) you wouldn't be able to use your eSATA drive at the same time as the I/O device as they both use the ExpressCard/34 port ... you would have to use a FW800 drive for your media instead. On the plus side the MXO2 includes a calibration tool which can help you calibrate your LCD/LED screen via HDMI for accurate color reproduction.
    An alternative device would be the AJA IoHD (or perhaps Motu V4HD) which connects via FW800. It's a superb piece of kit but is costly and doesn't offer any calibration utility ... that said, a good quality plasma display, such as a Panasonic Pro Plasma, can be found relatively cheaply and many of these have built in picture controls suitable for getting an accurate calibration.
    The future is much brighter for Mac laptop users with the introduction of the Thunderbolt connector on the latest MBP revisions. As with FireWire and ExpressCard, you can expect to see I/O devices, hard drives and monitors etc that will connect directly via that connection, greatly expanding the capabilities of a simple laptop setup.

  • Color correction challenge, PP5.5 Mac, ProRes to WMV

    I'm eager to complete my transition from FC Studio to Production Premium CS5.5, but I'm challenged to ensure consistent color in my ProRes to WMV workflow. Any advice would be appreciated.
    My shooting gear: EX1R, w and w/o Nanoflash
    Editing gear: 2008 MacPro (3.1), OSX 10.6.7, 10 GB RAM, ATI Raedon 4870
    Workflow (FCP): Acquire footage, edit native (XD CAM EX/XDCAM HD22), render sequence to ProRes 422, transcode via Quicktime 7 Pro/Flip for Mac to produce WMV files for my PC clients.
    Workflow CS5.5 (intended:) Acquire footage, edit native (XDCAM HD 422 via Nanoflash), output sequence to ProRes, transcode to WMV via Quicktime 7 Pro/Flip for Mac HD. After I put a "trial" sequence together in PP5.5, I adjust footage with 3-way color corrector. Here's where the fun starts:
    Process: I attempt to create a "master file" from the sequence, using AME with output set for Pro Res. The next intended step would be to open the file in Quicktime Pro 7, then encode via Flip for Mac to produce a smaller WMV file for my clients.
    Outcome (1) The results look as though color correction was bypassed completely. After much trial and error, I discovered that when I encoded using ProRes 4444, color corrections were preserved. Yet when I transcoded from 4444 to wmv, (2) the resulting files appeared to have no color correction. No good.
    I'm stumped! I thought I was on to something when I noticed the "preset" for outputting XDCAM HD422 was not set for "progressive," but it appears to make no difference.
    Sidebar: I experience the same issue regardless of use of XDCAM EX or XDCAM HD422 files. With the latter, I've edited clips in MOV and MXF format. Same outcome.
    Until I get this workflow issue sorted out, I'm stalled in completing my transition to PP. I'd like to have acquired gobs more RAM and an Nvidia Quadro 4800 card already, but I need to know that I've fixed this issue first.
    Any suggestions most welcome.
    Sincerely,
    Tom
    Raleigh, NC

    I finally figured it out! If there are any other FCP to PP traitors out there like me in Mac land, here's a workflow that results in WMVs matching the color corrections created in your PP sequence:
    1) Edit native. In my case, I'm working with "XDCAM HD 422," the result of linking a Nanoflash set for 100 mbps/long gop to my EX1R. Both FCP and PP "read" them as 50 mbps files.
    2) Export media to AME, checking the box, "Match Sequence Settings." With little delay, this produces a file with an mpeg extension (the mpeg-2 codec). In Quicktime player, this yields silent footage with no audio. Bummer. End of story, I thought.
    3) But this time, I brought that same "black" file into Apple Compressor. Using the Flip For Mac plug in, I exported to one of my "regular" settings, 2-pass, VBR, 640x360. The result: a perfect color match with my color corrected PP sequence.
    I'm sure there are alternatives to bringing a file that won't play in Quicktime into Compressor. I'll try Quicktime Pro and Streamclip next. But the point -- I think -- is to not bother with any more intermediate formats/files than one has to.
    Sighs of relief here.
    Tom

  • Color Correction Novice rounding home stretch w/ a Q

    Hi,
    So far, I've received some valuable advice & tips for my 1st attempts at color correction, esp since my production falls outside the normal applications. The help has been great!
    I went thru my production and did scene by scene corrections, which lost most of its intimidation with enough practice. I still havent tackled the Keyframe approach to having corrections shift during the course of a scene - I'm hoping to escape without having to do that.
    Heres my question -
    I did all the corrections, with a calibrated external monitor, and then had the program render all the video effects. Then I chose "print to video". When the program ran, the colors were a little different overall than what I had set in the program (less orange, more pink) and in a few scenes (orig underexposed, but corrected in the process), the color shifted more radically, esp in the shadow / black values which fell greenish.
    I didnt see any of this as I was correcting, and the signal path was the same when I printed to dvd, same monitor w/ no calibration changes.
    Is this normal? Maybe these shifts happen more discreetly in reg productions, mine is a live stage shoot with a lot of red light.
    Thanks for all the help, & Happy New Year
    Duane
    G5 tower   Mac OS X (10.4.2)  

    Hi,
    Thanks for all the info, I'm starting to look at ways of sending what I have to people who need to see it. The project will likely still require some tweaking so this isnt a final mastering step by any means. Just looking for something that looks as good as what I see on the monitor after rendering.
    Its looking like (from the lasts posts) that 'out thru firewire -> dvd recorder' isnt the best choice & if I can keep it in the computer & flow it directly to its burner, the opportunities for problems can be minimalized.
    I tried exporting to quicktime, that resulted in an FCP Quicktime file that took 3 hrs to create & was almost 13 gig. (program is 50 min) so it looked great but was too huge to put onto a disk.
    If anyone has guidance in this area, I'd appreciate it. I'm gonna poke around in those options & then likely post a further question seperately on this subject. I want to get it onto a dv disc via toast 6 (I see Quicktime w/ Compression is an option so I'm gonna explore that)
    Thank you all again for the correction help, in that 13 gig version, it looked really great (no green in shadow artifacts ! )
    Regards,
    Duane
    G5 tower   Mac OS X (10.4.2)  
    G5 tower   Mac OS X (10.4.2)  
    G5 tower   Mac OS X (10.4.2)  

  • Multiple Secondary Color Correction Possible?

    I'm having a strange problem trying to use the secondary color correction inside the 3 way color corrector. It seems to work ok for the 1st filter, but if I try to use it for a a second or more instance of the filter, it seems to behave strangely or not at all.
    I can select a color using the eyedropper, and sometimes it will show up in the color swatch, sometimes not.
    If I chose to show the 'mask' of the results, it will usually show the clip as white in the program monitor, so I can't see where I'm masking.
    I have a feeling that this might have to do with multiple masks interacting with the secondary color correction, and they somehow counteract each other. It doesn't seem very intuitive about how to fix it though.
    I'm also noticing pretty intense banding with the 3 way, I know I can smooth it with the other controls in the color corrector, but I'm also wondering if this might have to do with some secret sequence or screen preview setting that I may have read about before.
    Thanks for any advice.

    The mask should change from white to composite image when you select the left-hand eyedropper.  Is this not happening?

  • Color correction novice back with a problem/question.

    Hi,
    I have been working on color correction for an edit of a live 2 camera shoot concert. Edits are almost all final. I dug into correcting color between the 2 cameras & after some practice got good results.
    Tho, I noticed that corrections looked slightly different after rendering them, and again slightly different after exporting to full uncompressed quicktime video.
    Saturation levels shifted (less), & some shots showed slightly different color balance. This is a unique shoot because the stage was fully lit in red light & red can be one of the most difficult colors in video (in my experience).
    So I eventually started that vicious cycle of correcting not by eye but by anticipating what was needed to get a desired result after rendering & exporting... each time it was lengthy renders & exports before seeing the results.
    So I had several versions of the project saved w/ different renderings, etc. All of this is stored on a 250 gig 2nd internal drive which I bought & installed just for editing. All files & edit lists etc were kept there.
    So I'm trying to look at different versions after having to put the project aside for a couple of weeks, and every version I open shows me a list of render files that it says it can't find. I've just been choosing to re-render.
    (I'm wondering if a routine session of running disk warrior on my drives could have contributed to this?? Thats the only thing I can think of, other than the OSX upgrade to 10.4.4, which also included a quicktime upgrade.)
    I'm new at this so I'm trying to figure out if this disappearance of render files is normal? In one version I chose 'search computer for render files' or something to that effect & I watched it go thru my drives one after another & when it got to the 2nd internal drive (where all the render files should be), it spent about 1/10th the time that it spent searching other drives. It really jumped in & out of that drive really quickly.
    Its not all the render files that are missing, I looked in the render folder & some have older dates, while a section of them are from tonite when I re-rendered. Then more with the older date.
    Anybody have any advice?
    Thanks for your help
    Duane
    G5 tower   Mac OS X (10.4.4)  

    Hi,
    I have been working on color correction for an edit of a live 2 camera shoot concert. Edits are almost all final. I dug into correcting color between the 2 cameras & after some practice got good results.
    Tho, I noticed that corrections looked slightly different after rendering them, and again slightly different after exporting to full uncompressed quicktime video.
    Saturation levels shifted (less), & some shots showed slightly different color balance. This is a unique shoot because the stage was fully lit in red light & red can be one of the most difficult colors in video (in my experience).
    So I eventually started that vicious cycle of correcting not by eye but by anticipating what was needed to get a desired result after rendering & exporting... each time it was lengthy renders & exports before seeing the results.
    So I had several versions of the project saved w/ different renderings, etc. All of this is stored on a 250 gig 2nd internal drive which I bought & installed just for editing. All files & edit lists etc were kept there.
    So I'm trying to look at different versions after having to put the project aside for a couple of weeks, and every version I open shows me a list of render files that it says it can't find. I've just been choosing to re-render.
    (I'm wondering if a routine session of running disk warrior on my drives could have contributed to this?? Thats the only thing I can think of, other than the OSX upgrade to 10.4.4, which also included a quicktime upgrade.)
    I'm new at this so I'm trying to figure out if this disappearance of render files is normal? In one version I chose 'search computer for render files' or something to that effect & I watched it go thru my drives one after another & when it got to the 2nd internal drive (where all the render files should be), it spent about 1/10th the time that it spent searching other drives. It really jumped in & out of that drive really quickly.
    Its not all the render files that are missing, I looked in the render folder & some have older dates, while a section of them are from tonite when I re-rendered. Then more with the older date.
    Anybody have any advice?
    Thanks for your help
    Duane
    G5 tower   Mac OS X (10.4.4)  

  • Color Correcting In CC - Making Whites Actually White

    Okay so my main question is,
    Are there any functions or plugins where I can look at the clip, and then click on a spot that I know should be white (But its not because the camera wasn't white balanced 100%), and have After effects automatically adjust so it is white.
    Kind of like how you set white balance on a camera, where you hold up a white card or other completely white object, click the white balance, and the camera automatically adjust to make it white.
    Except I want to be able to just click on a point in the footage and have it adjust everything.
    If this is not an option, then are there any good tips for white balancing the footage?
    IE: I film a subject against a white wall, the camera wasn't white balanced so the background appears to be light beige. I want to click the background in AE and have it color correct and make it white.
    Thanks

    Finding perfect white is always a challenge and it may foul up other things in your shot because white walls are reflective and if someone is wearing a blue shirt against a white wall, white may not be white. Setting white may get you in the ball park, but it is usually only the first step in color grading. You usually want to push highlights to one hue and shadows to another.
    The procedure and the tools used to color grade a shot depend entirely on the shot. For most of my work Colorists II is my preferred tool. Some shots require more than one instance of colorist to get to where I want to go. Color finesse is also good, but for some work, and this depends entirely on the shot,  Auto Color is all that I need. No matter what technique you use to grade your shots you need some kind of scope or histogram that you understand so you can know where you are pushing the levels in the shot. I'm always checking areas of a shot with the Info Panel to make sure I know what I've done to the color values. Most of all, good color grading takes time to learn and a very thorough knowledge of color.

Maybe you are looking for