Color corrections don't get processed when burned in DVD Studio Pro

I am working on an FCP project that has alot of darkened day for night clips. I export using compressor at best quality, and project looks great in viewer in DVD Studio Pro, but for some reason when I burn the final DVD and watch it, all the darkness changes are gone, and the footage is in it's original state. What is causing this? How can I burn a DVD that looks like what I am exporting?? Other thing is that when I burn a quicktime of the same project to a DVD using toast, the color changes remain, and they look more accurate- I thought Quicktime would be lower quality than Compressor?

I have acutaly been using this technique on a recent project, and have a few additional observations:
One is that, even if you use a black background in your menu, and map your button colors to black, not all players generate the overlay colors the same way, and the black patches sometimes appear lighter then the background, particularly on software players, since computers are generating RGB vs. YUV.
Another detail is that when a button is activated, the overlays disappear, and all the button graphics embedded in the background are visible while the player switches to the new menu. I have however used the following workaround for this: Generally players will display a freeze frame of the background of the menu while switching to the jump target, usually the first frame or loop point of a menu with motion assets. By creating each menu as an animation where the buttons fade up in the first few frames, I can create a "clean" background for use as the freeze frame displayed during the switch.
This particular disc hhas a tight bit budget, and lots of menus, and so I am creating very short motion assets (1 second) and setting them to "still" at end. I haven't acutally checked this on a player yet, to see whter the still or the beginning of the asset gets used as the freeze frame, I'll post back with the answer after I have tested it.

Similar Messages

Getting Chapters from IDVD to DVD Studio Pro

I have a video that must be paused after chapter segments by user and have found that I need to use DVD studio pro which I purchased today with no knowledge of how it works. Post just today explains that.
I built an entire movie with transitions, audio and chapters iniDVD and Now I would like to get those chapter markers into DVD studio pro. Do i have to first export to Final Cut and then export to DVD Studio.
I have made a quicktime movie that when viewed in Quicktime shows all the chapters(31 in all).
Is there a better way to do this than manually find each time points and adding markers in dvd pro?
Secondly, once i get those markers in DVD studio, can i create a pause and next function as one whole movie or do they need to be separate items(term).
Thansk for any guidance.

If you added Chapter Markers in Final Cut Pro, then you are all set. In FCP, Export a QuickTime Movie and when the dialog box opens make sure your Markers are set to "DVD Studio Pro Markers".
If you added Chapter Markers in iDVD, then you are out of luck. You have to do it all over again. You could add Chapter Markers in DVD SP, but I recommend doing it in FCP.

DVD is Not Burning in DVD Studio Pro

DVD is Not Burning in DVD Studio Pro 4.2.0

I used build and format approach. Both discs play fine on computer platforms, but not on a consumer DVD connected to the TV. Normally I have no problem. I checked and rechecked several times all the preferences for Studio Pro. The only thing I noticed was instead of generating a Video and Audio TS file, it generated one HVDVD_TS file. Is this the issue? If so,where do I correct this (in the settings)?
Thanks

Burn in DVD Studio Pro only says Video Bitrate too high

My camera is a Sony Ex1 and I have a 1 hour and 7 minute video that I have sent through Compressor to DVD Studio Pro, which I have done many times before upgrading to FCP 7, and now when I try to build it, it always tells be that the video bitrate is to high. I have gone though preferences and reduced the bitrate to 3 and max 5 and it still does it. I have also made a Quicktime movie and tried to build and burn it in DVD Studio Pro and that does not work either. I have no problem viewing it in DVD Studio Pro when I simulate it.
I would appreciate any help you guy could give me. This is just a hobby, but I have been doing it for over 5 years and have never had this problem.

Dexil Rold wrote:
When I got DVD Pro 7, I installed 10.6 on a new 1 Tb hard drive and then installed DVD Pro 7, so it was installed on a completely new drive. When I ran my movie through Compressor, I did it two times. One with the DVD 90 Best, one with a suggestion by the new book on Studio Pro 4 (average 4.5 Mbps, Max 7.5 Mbps. I also made a Quicktime Movie. I did have to try several times to get it through Compressor, after hours FCP would quit before it was finished, but I did get it to work
It could be spiking with the 7.5, doubtful, but could be even with AC3 audio.
Try this to see if it works - Export the Final Cut movie as self contained movie (is that what the QuickTime Movie was, the entire timeline self contained?) Sorry I am a bit unclear as to whether you got that to go through Compressor or was it the timeline from FCP, which quit, but successfully went through Compressor. Perhaps it is related to Snow Leopard.
When you look at the build files on your hard drive, is it crashing out at the same point?
Take a look here http://dvdstepbystep.com/vts.php at the image at the bottom, does the build get to the same spot and/or does it throw the error in the log at the same part? Anything else in the log?
Anyway, there would be a few things to try.
I would think the easiest is to
1.) Export a small section of the movie from Final Cut as a self contained movie.
2.) Bring that movie into Compressor and run Compressor on it (including AC3 files) then bring that into DVD SP to see if it builds.
If it does, it would seem to be that there may be a spike causing the error (are you using multiple video streams, subtitles or anything else or is is a straight one video/one audio on the track.)
If that works it would seem to be a spike issue, especially if the error is thrown at the some spot in the building process.
If it gets past that, export the entire timeline and run it through Compressor and see if that works, dial down the top bitrate a bit for the video.
You could also do some other things (make another partition for an install of Leopard, not Snow Leopard, try a new user, etc.) but the above may be the easiest to start with.
When you say it takes hours to send from Final Cut, is that sending from Final Cut to Compressor or Final Cut to a self contained movie? Of course alot of this depends on your Final Cut timeline, codecs, color corrections, renders and the rest, but on a Octo it should not be painfully long for a 1 hour few minutes movie. I ave Final Cut 7 on a laptop and it does a pretty good job speedwise on some HDV timelines, which are a pain to send out. You may want to check things like where you set your scratch disks, when you are putting the media etc. (More as an aside FYI)

Another burn problem (dvd studio pro 3)

have built my project, but when i hit the burn button i just get a message box telling me 'formatting was successful'. why won't it start burning a disc, what am i doing wrong?
thanks

I am having the same problem. Have you recently upgraded to Leopard? It worked fine for me until I upgraded. I hope they come up with a fix. I would like to use DVD Studio Pro 3 more, but I don't use it enough to justify upgrading to 4.

Slight pixellation on faces at end of DVD after burning in DVD Studio Pro. Can you help?

I am appealing to those much more expert than myself. I have burned a DVD of my short film in DVD Studio Pro.
Original file: Apple Pro Res 422 HQ (PAL 25fps)
I put this into Compressor: Best quality DVD 90 mins.
Then I imported this in DVD Studio Pro and burned a DVD
The DVD looks great until the end where the faces start to go pixellated in an outdoor scene every second or so for a second.
The thing is that this only suddenly started to happen. I had originally done the compression and burned dvds and it all looked fine, but then suddenly when I burned some extra DVDs I noticed this had happened. I recompressed the files, and it had the same problem in exactly the same place. (The original file doesn't have this problem.)
The thing is that in between I had made a new separate DVD Studio Pro project in NTSC and imported my compressed 29.97fps Apple pro res file of the film. I'm not sure how this would have affected the original PAL project or if this has anything to do with it!
When I originally burned the PAL DVDs I also did a second version where I exported from FCP a PAL QT of the film 720x576 and then imported this into DVD Studio Pro and let DVD Studio Pro do the rest of the compression. I am trying this again to see if this makes any difference.
Any advice?

Hi Christina, thanks for this. I am a bit confused exactly how many and where to put.
You see the shot in question is a static two shot. It is used several times in the scene, but the only place I have a problem is the final time we see the shot. It is at the end of the shot and over the final 13 seconds, the faces pixellate slightly every now and then for like a frame. How many compression markers should I put in do you think?
Thanks again for your help.

Burn from dvd studio pro, to playing on MBP?

I just got done making a dvd on DVD studio pro and the dvd plays perfectly fine on my two dvd players that I have at home. But When I want to play it on my Mac book pro, my computer just tries to read it and then spits it back out. any help? why is it not playing on my MBP?

Hi
It's the same machine where you burned the disc? I would try using a different media brand. But ussually the playback problems are in stand alone players, not in computers.
Did you try another video DVD in the same machine?
Hope that helps !
Alberto

DVD burner and DVD Studio Pro

Are the Mac Pros and the other intel macs have better compatibility with authoring DVDs than the G4s? I'm on my dual 867 mhz G4, and when I encode using compressor with the default setting, and build it in DVD Studio Pro, the dvd plays fine on my sony player but not on some other DVD players like JVC. My friends JVC recorer is new, they just got it a month ago, and it says it plays DVD/R discs. I produced a 7 minute short, and even with the short film, it still has problems playing on some dvd players.

I've cleaned it using disc cleaner and I've also burned the video_ts files to my sony DVD burner (my sony DVD burner is only 3 months old) besides the burner in my Mac and I'm still having playback issues on some DVD players? I've also tested them without dvd lables on verbatim discs. So no one else is having any problems authoring their DVDs on the Mac Pros or the other intel based macs?

Get menus 16:9 in DVD Studio Pro?

I am trying to get my menus in DVD Studio Pro to be 16:9, but can't seem to figure out how. I tried to change that in Preferences, but it did nothing. Can somebody help me out?

Click the menu icon in the graphical representation at top left.
Go to the Inspector at bottom right and set the Display Mode button:

AAC audio file increase in size when imported into DVD Studio Pro

Hello all!
I just encountered a very unique issue with the DVD Studio Pro. I used the compressor to export my video as an MPEG2 file and my audio as AAC file. After the compression my audio file had an .mpg4 extention and was about 160MB in size. When I imported it into my DVD Studio Pro project, however, the audio increased in size to 1.2 GB. I tried so many different compressions, but the problem really is (I think) that the file bumps up in size once imported into DVD SP project. Is there anything in preferences that I need to adjust or change? Please help!
Thank you.

Hi
I'm a little lost now with versions history, but if you have A.Pack in your App folder, then must use it. Check this tutorial: Encoding AC3 with A.Pack.
Compressor 2 and 3 has AC3 encoding inside the main application.
Alberto

Hello. How do I get my FCP sequence into DVD Studio Pro? I've tried exporting as QT movie, then importing as asset, am told format is incompatible.

Trying to get my HD sequence in FCP to burn to DVD. How to accomplish this? I export sequence as Quicktime movie, try to import as as asset, after a couple minutes a window says "format incompatible" or something to that effect.
Also, in FCP the canvas only shows timeline video when it's playing. When stopped, blank screen -- how do I fix this?
Many thanks.

#42 - Quick and dirty way to author a DVD
Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
1. Export a QT movie, either a reference file or self contained using current settings.
2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
3. Select the left blue one and hit delete.
4. Now, select the green one, right click on it amd select the top option "first play".
5. Now drag your QT from the broswer and drop it on top of the green monitor.
6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
THATS ALL!!!
NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.

There are not templates when I open DVD Studio Pro.

How do I get them?

If the templates are on your computer, but not showing up in your palette for whatever reason, you can import them to the palette, but they will appear under custom instead of the apple tab.
You can install them from the FCS discs in one of two ways. I used to simply put in the first disc, and choose custom install options, unchecking all but the DVDSP templates, but when I did this recently with FCS2, it would not let me me un-check any of the other apps, and then running the install actually downgraded all the apps to their dot-zero versions, which I found depressing and inconvenient. Some of the FCS discs will have stand-alone isntallers you can run, which I'd try first. If there's no installer n the DVDSP templates disc you can still copy them over and import them to the palette manually.

Lacie Blu-Ray external burner with DVD Studio Pro?

Is there a way to burn my HDV footage as MPEG-2 to a disk image and burn it on a Blu-Ray disk on the Lacie external drive?

No, you can burn a movie disc but - and I'm not 100% certain of this - I believe you'll need the Blu-ray add-on (it's a software download) for Toast 9 (the version that comes with the burners) in order to burn a movie disc.

Dual Layer Burning In DVD Studio Pro 3

I am working on a 2 plus hour project. If I want it to fit on a standard 4.7 GB Disc I will most likely have to compress it a great deal. I have a dual layer burner and media. Is there a switch or setting I can use to simply burn to dual layer? The video is over 2 hours and I want 3 audio tracks and some special features. Burning to dual layer would allow me not to compromise any quality etc. Thanks.

Is there a switch or setting I can use to simply burn to dual layer?
Yes. You just select the disc type (in the normal way). What is trickier is setting a suitable layer break-point. You either have to make sure that you do have chapter marker(s) at a suitable place, or - if your material is made up of short elements - 'balance' them between the two layers.

DVD Studio Pro 4 doesn't see my dual layer burner

Not too long ago, I upgraded my superdrive to the MCE 16X DVD-/+R drive with double layer support. Now, when I try to burn to DVD Studio Pro 4, the drive is not listed as an output option. The only thing listed are my hard drives. Allegedly, this drive is supposed to have native support with both DVD Studio Pro 4 and Tiger. Short of taking out this drive and putting the single layer drive back in, does anyone have a suggestion?
By the way, it WILL burn CDs in ITunes...
Judy
G5 Dual 2.5 GHz Mac OS X (10.4.8)

Don't know much about the burner, but can you can use Toast or Disk Utility as mentioned in may threads involving alternative burning outside of DVDSP?
If so then there ya go but if not then back to single-layer I guess.

Color corrections don't get processed when burned in DVD Studio Pro

Similar Messages

Maybe you are looking for