Color Corrector edits have stopped functioning

I use Premiere Pro CS4. I have a project with about 100 clips in which I used some Fast Color Corrector presets I had made to correct the color. (There is color correction in every clip so it was a lot of work.) This evening I noticed that all of the color corrections I made are no longer working, except for the last few I had done. The Fast Color Correction effects are still being shown in the Effects Control window, and each one still has all of the settings adjustments I had made, but they are no longer affecting the video.
So I have these questions:
Why are the changes I had made with my Fast Color Corrector presets no longer affecting the video?
Can I correct the problem so that all of my color correction work is restored?

This turned out to be a problem with my monitor, not with Premiere Pro CS4. My apologies.

Similar Messages

HT2832 Help! My fire wire 400 ports have stopped functioning, and my 800 is now having problems

Help! My fire wire 400 ports have stopped functioning, and my 800 is now having problems....I'm getting a protools message telling me there is a problem with my firewire.

First, you have posted in the wrong area, this is for PPCs and you have an intel.
Try repairing permissions and resetting the PRAM.
Let us know how you made out.

Fast Color Corrector Edit Effects to a Video Clip --- need help, please

I am editing a single video clip. The clip is too dark, even though I used a video light. Classroom in a Book, page 298 recommends to apply the Fast Color Corrector. I tried...BUT as book reads, the color corrector wheel should pop up and allows changes to color.????
Please help. With Thanks. Please reply with help to me by e-mail...[email protected]
Larry

Hello Mr. Hoecker:
Thanks very much for your reply and advice. I am enclosing photos to show that:
I can NOT see anything by clicking on the grey triangles.
In “Fast Color Corrector” I do NOT see a section which says…”Input Levels”
Perhaps my install of CS 6 is missing some software. I will re-install and see until you can reply on this.
This is a page from the single clip I need to lighten so the face and black dive suit shows better.
FYI: I have been an Adobe subscriber and user since there was Adobe. I try to use the Classroom in a book for CS 5 and CS 6. When stumped, I go into the book and try to find a fix. In this situation, the little triangles, etc. are NOT there where I can see them. And…YES there is a LOT that I do not know.
Many thanks.
Larry McKenna

Alarms Have Stopped Functioning

A week or two ago, all my alarms stopped functioning. I have 7 calandars and recently subscribed to a fairly large cal. with maybe 50 events, many are recurring.
Some of my alarms are to email alarms and some alarms are a msg with sound.
But all are went silent 2 weeks ago. I have trashed the prefs.
Thanks. Brian

I have a similar problem. If I reboot my Mac the calendar alarms will not appear until I launch the iCal app. After that the alarms will appear even if iCal was quit. There is still iCalAlarmScheduler entry in my Login Items list.

Compressor Droplets have stopped functioning.

Recently all of my Droplets for Compressor 3.5.3 have stopped working.
Icons have changed to developer icons as well.
Dragging source videos does nothing, opening the droplet says that it is Damaged or Incomplete.
I tried restoring the same droplets from a Time Machine backup from when they were working, but that has not changed my situation.
Creating new Droplets in Compressor also does nothing.
Compressor Repair has also not helped.
Repairing disk permissions did nothing.
Any ideas?

Droplets work by symbolically-linking to an app inside the Compressor bundle. If this app moves or for some reason the link is broken, they will not work and will not show an icon.
If you ctrl-click on the droplet and select Show Package Contents you will be able to look inside it. There should be two folders in the root - Contents and Settings. Contents should be a link and you can ctrl-click and select Get Info to view where it is pointing. On my system it points to /Applications/Final Cut Studio/Compressor.app/Droplet.app/Contents.
You may also want to run something like Onyx, as it may help to rebuild launchd caches.

Windows 8 USB ports have stopped functioning.

I have a Envy 1534 desktop and after taking an update to windows 8 today my keyboard and mouse no longer function past the boot system. When windows loads the keyboard goes dark and I cannot use any of the USB ports on my system. This renders the system completely useless. I have tried to go back to an earlier system point however apparently the update was already installing because as soon as i reboot it immediately reinstalls its self before i can stop it. I have not been able to access the safe mode and the refresh function fails because the "drive with my OS on it is Locked". This issue has been solved elsewhere by changing the USB mode in your bios however HP does not allow access to these bios functions. At this point I am at a loss as i cannot access windows at all, and the restore functions seem to be non functional.

Hi,
If you run into a "locked HD" situation then you will have to clear the CMOS to get the PC back to the default BIOS setting in case secure boot was enabled.
Boot up a Windows 7 or 8 installation CD and go to the command console and get MSCONFIG launched. At that point you should be able to set the boot to safe mode for the C partition on the hard drive. I just tried this process recently and it worked for me.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

My iTunes controls (F7, F8, F9) have stopped functioning. Any suggestions?

The volume controls (F11, F12) still work. Is there a toggle that might have accidentally been switched off for the music controls specifically? Or any other suggestions?

Hey there firepower1030,
It sounds like you are trying to use your function keys to control iTunes, but they are not doing so all of a sudden. You may need to disable the function that toggles that in your System Preferences:
Choose Apple menu > System Preferences, then click Keyboard.
Select the “Use all F1, F2, etc. keys as standard function keys” checkbox.
OS X Mavericks: Use keyboard function keys
http://support.apple.com/kb/PH13982
Thank you for using Apple Support Communities.
Take care,
Sterling

Dreamweaver: Rollover images inserted but have stopped working

Hello,
I am new to Dreamweaver and using CS3.
I made the following Page: https://www.lovemondaymedia.com/princes-trust-facebook-page/facebooktab.php and have put rollovers in for the four 'navigation' buttons (Home, Need Help, Support Us, About the Trust).
Yesterday the rollover images were working without issue but today they have stopped functioning and I'm not sure what I've done, or how to fix it! I'm hoping someone can take a look at the code of the page and let me know if they see an error.
Thank you in advance
Marie

For starters, you could change this -
<script type="text/javascript">
FB.init(
appId: FB_APP_ID, '288575697836114',
Status: true,
Cookie: true,
Xfbml: true
function MM_swapImgRestore() { //v3.0
to this -
<script type="text/javascript">
function MM_swapImgRestore() { //v3.0
Something about that bit of facebook code looks fishy anyhow. Did you add it?

Premiere Pro stops rendering and gives error message when encounters "RGB Color Corrector"

Premiere Pro (and also Encore) stops rendering and gives error message when it encounters a clip containing the "RGB Color Corrector" in any clip. It will process clips without RGBCC, but will stop when it gets to one with RGBCC activavted. PP will render clips if other effects, such as "Fast Color Corrector", "Color Balance (HLS)", and "Three-Way Color Corrector" are selected. However, these do not have the capabilities that The other color correctors will not do what RGB color corrector does, so I need to have this working to finish a large product that is due to the client. Please help me..... I am not using the Creative Cloud version, and can't find either a download for the new update from 2013, or a phone number to talk to anyone.

Using a Win7 computer with 2.8 quad core processor, 24 gig of ram, Nvidia Quadro 5000 video card. Don't think I have any plugins. I looked at one a while back for cleaning up grainy video, but I am not sure I paid for that. Think I deleted it.
Incidentally, someone named Jim on another part of the forum mentioned that this problem has been fixed in the CC version of the program. I am using the non-CC version because I am 68 years old and only do seminars and documentation video. Don't need so many bells and whistles, and definitely don't need learning curves every few weeks. CS6.0.3 works fine for me. By the way, someone else said that maybe version 6.0.1 might work better and I should revert to that. Not sure if it is the version i have on the disk upgrade to 5.5 that I purchased in December.
As it stands now, I have 7.5 hours of a seminar that is ready to go out the door. If there is an upgrade I can get from Adobe, maybe you can tell me about it. If I have a setting incorrect in the video output format, maybe I can change that. So far it just happens with clips in my video that have RGB color correction.
Rick

I am having trouble with my JAVA Applet. It isn't functioning on SAFARI. It seems to have stopped working and I used it on SAFARI last year. Any suggestions ?

I am having trouble with my JAVA Applet. It isn't functioning on SAFARI. It seems to have stopped working and I used it on SAFARI last year. Any suggestions?

Post in the Safari forum area.

Why does Fast Color Corrector have a Mask Output option?

Fast Color Corrector has a Mask Output option. In other effects the Mask Output option is used to see the mask created with the Secondary Color Correction feature within the effects. Fast Color Corrector does not have a Secondary Color Correction option.

Well...we digress.
The Three-way Color Corrector Master wheel does not work the same way as the Fast Color Corrector color wheel. I think the Three-way Color Corrector Master control, overall, doesn't work properly. Try the following:
1) In the Three-way Color Corrector, select the Master Tonal Range and reduce Saturation to 0. There is still plenty of color information present.
2) With the Master Tonal Range selected, drag the Master Balance Magnitude to 100 degrees (keeping the Master Balance Gain at its default 20). Do the same with the Fast Color Corrector (using the same Balance Angle) and note how differently they behave. The Fast Color Corrector changes hue over all luminance levels. The Three-way Color Corrector Master control adjusts hue over what appears to be a sub-set of full luminance.
One other color wheel characteristic that I find confounding:
In most color wheels, 0 degrees is Red, 120 is Green, and 240 is blue. The numeric values increase counter-clockwise. OK, that is the norm. So why is it that with P Pro color wheels, Red is -110 degrees, Green is 130, and blue is 10? Or...looking at compass points: on the P Pro Color wheel, North is -90 degrees, East is minus or plus 0 degrees, South is 90, West is minus or plus 180?
Jeff

My ipad 2 camera stop functioning when i switch from back to front? Anyone can help me? i have already restore my ipad2 but the problem is still recurring.

My ipad 2 camera stop functioning when i switch from back to front? Anyone can help me? i have already restore my ipad2 but the problem is still recurring.

Abelynn-
Does the problem occur in both Camera and Photo Booth Apps? If you run the FaceTime App, does the front camera work?
If the front camera never works, you may have a defective iPad. If you are near an Apple company store, the Apple Store Genius can verify the problem, and may replace it on the spot.
If the front camera works for at least one App, try rebooting the iPad. Hold down both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. After a couple of minutes, the iPad will restart. Rebooting will not hurt anything, and may correct your problem.
Fred

I have got Acrobat 10.1.13 for Mac running Yosemite - and the 'advanced search' feature has stopped functioning - it doesn't install the search window, nothing happens - so I uninstalled acrobat, reinstalled it - but it still not working?

I have got Acrobat 10.1.13 for Mac running Yosemite - and the 'advanced search' feature has stopped functioning - it doesn't install the search window, nothing happens - so I uninstalled acrobat, reinstalled it - but it still not working?

It's a 3rd party app. You really should contact Adobe Support and/or post in the Adobe Forums
Mac OS X (10.6.6)
Use Software Update or the OS 10.6.8 combo update to update your OS. Also, update everything SU has to offer for your computer. When done, repair permissions and restart your computer.

My camera and iBooks have stopped sending emails, the function and ability to create the email is still there but my iPad will no loner send the email or even store a draft on my account to suggest the email was ever written; please help I need thability

My camera and iBooks have stopped sending emails, the function and ability to create the email is still there but my iPad will no loner send the email or even store a draft on my account to suggest the email was ever written; please help I really need this functionality.

Can you send any emails at all indicating that the mail app is working? Did you try any basic stuff yet?
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Close those affected apps and restart the iPad. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Hi all, my ipad mute hardware button just stopped functioning, I have to use lock rotation to enjoy some apps..what do I do?

Hi all, my ipad mute hardware button just stopped functioning, I have to use lock rotation to enjoy some apps..what do I do?

Your statement doesn't make sense to me.... But it could just be me not understanding what you mean. Let me explain how the side switch and the control center work for screen rotation lock and system sounds.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Color Corrector edits have stopped functioning

Similar Messages

Maybe you are looking for