Color Corrector's Frame Viewer Split Not Showing Up On External Monitor

Kind've a long title - sorry - but . . . here's my question:
Why am I not able to see the Frame Viewer's split on my external monitor?
A further, more detailed explanation of the problem:
I recently purchased Ripple Training's Color Correction with Andrew Balis. It's very, very imformative and I think will help a lot when it comes time to begin color correcting the feature I'm working on. The section I'm on shows the Frame Viewer tab in the Tool Bench window that presents itself when one opens Color Correction under the Arrange area. In other words, Arrange>Color Correction sets up your windows for color correcting with your Viewer, Canvas, and Tool Bench windows aligned from left to right. When one opens up the 3 Way Color Corrector on a clip and makes a change in the clip, the Frame Viewer tab in the Tool Bench window will show a split screen where on one side you'll have your clip with the color correction you just did, and the other side un-color corrected. Isn't this (split) image supposed to show up in your external monitor just as the images in the Canvas and the Viewer?
That doesn't seem to be happening on my external monitor.
I'm not sure if this problem/issue I'm having is related to the muticlipl issue I posted in an earlier thread http://discussions.apple.com/thread.jspa?threadID=1330596&tstart=0
perhaps.
Any help on this issue would be greatly appreciated.
Thanks in advance,
Javier Calderon

Ahhh, Shane. So it's as simple as that? So then there's nothing wrong with my setup or my external monitor? FCP's just not designed to show the Tool Bench's Frame Viewer image in your external monitor? Wow . . . Well that answers that then I guess. And you're right . . . that IS indeed kind've lame . . .
Thanks.
Javier
. . . um . . . doesn't that kind've defeat the purpose of proper color correction then (regarding the Tool Bench's Frame Viewer anyway)? If the only place you can see your color corrected Frame Viewer split images is on a monitor that's NOT suited for color correction? Anyway . . . just a thought . . .

Similar Messages

  • RED footage not showing up on external monitor (CS6)

    Hello all,
    When I select a RED clip (R3D) and place it in the source window to play it back.  It does not show up on my external monitor. (via Blackmagic Intensity Pro).
    However, it shows up once placed in the timeline.
    This is a problem because when attempting to play footage back for my client, they can not see the image.
    Thanks!
    - Ryan

    I have cs6 but dont have BM card and dont do what youre doing on set etc... but have worked on sets a lot and if youre trying to show producer, director, client ...stuff.... fast.... the best thing is just to do what works fastest... IMO you should just dump your clips into a sequence ( call it previews or something )... timeline and play the stuff so the program monitor is getting the and in turn going to your external monitor.. You can also ( at that point.. on timeline ) decide what to do with fast color correction type stuff ( looks etc ).... so they see something at least close to what they wanna see....
    The source monitor has traditionally been a way to set in out points to sorta do a quick edit of what you wanna use... and drop that into timeline from there...it was never intended to be a program monitor...and thats what BM is also dealing with.
    good luck..

  • IOS 7 Calendar Day View does not show any all-day events ?

    Hi,
    I realize that iOS 7 Calendar Day View  does not show any all-day events.
    Is this a bug ?
    Any help given is much appreciated.
    Thanks and Regards.

    Mine brings me right up to the current time, or in the case of another day, it takes me to the first appointment of the day.

  • Key frame values are not showing

    Does anyone know why my key frame values are not showing? How do I get them back?

    See this about showing and hiding columns:
    After Effects Help | General user interface items

  • "Library" view does not show ALL photos

    My "Library" view is not showing me the last 2 rolls I imported. If I click on the specific year views, I can see the photos, but I expect all photos are displayed in the "Library" view.
    While still running iPhoto 5, I imported a roll of images from disk that included photos taken at the end of Dec 2005 and in Jan 2006. These are the photos that do not show in the "Library" view. This was happening with iPhoto 5 and is still happening with iPhoto 6.
    Any suggestions for getting all photos to shwo in the "Library" view ?
    Thanks,
    Eliot

    Thanks -- I figured out my problem...
    Since iPhoto now seems to group items into "rolls", I had imported images from several different dates. The first image was from Sep'05, so it placed ALL the images imported, even those from Jan'06, with the Sep'05 photo in the middle of of my "Library" view.
    Is there a way to have the "Library" view sort in date order instead of by imported roll ?
    Thanks,
    Eliot

  • 4EA2 the Detail display for views does not show comments for the view

    I am running in an Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production environment.
    The Detail tab for a View does not show comments added for the view. I would like to request that the Detail tab be modified to display any comments added for the view.
    This is important for me because I want to use the Generate DB doc function (from the right-click menu linked to schemas), to generate documentation, and that function uses the same format as the Detail Tab. The View Comments are important for my users.  

    Hi Penny Halsall,
    Kindly check if that Facebook page can be followed by the public. If the profile can't be followed by the public, then the widget won't work as accepted.
    Facebook provides instructions to check/do this here: https://www.facebook.com/help/201148673283205
    OR
    You can generate the associated HTML code from this page :
    https://developers.facebook.com/docs/plugins/
    Regards
    Sonam

  • Clips not showing up on NTSC monitor when editing

    I have a Sony DSR-11 and Sony NTSC monitor connected to my computer.The clips are not showing up on the monitor when I am editing. They show up when I am in Log and Capture. Is there anything I can do to get this to work again?
    Thanks

    Start with the basics.
    View> video playback > apple firewire ntsc (or pal if you swing that way)
    View> external video > all frames
    View> external audio > audio follows video
    View> refresh all devices
    x

  • My computer is not showing up in share monitor

    Hi
    I was happily creating and sharing files to Vimeo from Final Cut Pro x - When I had a kernal panic - Hard reset and now "My Computer" does not show up in share monitor - It says no clusters found - When I goto share a file to vimeo now nothing happens ..
    Any clues - I am going mad....

    There is nothing to fix, it is not supposed to show up there. It will only show there as a 'camera' if there are photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc which you might want to then copy to your comptuer.
    What do you want to do with the iPad via My Computer ?

  • HT1338 the Macbook Pro would not even detect the external monitor.

    My Macbook pro will not connect to an external monitor after moving it. It has been running on this same monitor for 8 months. I switched to a new Desk last night, after hooking it up, the Macbook Pro would not even detect the external monitor. It was only showing the Macs monitor in Display. It did not even have where you could "Detect Display" available. Is there an update that I may have missed. I have tested all the Monitor connections with another laptop they all work.

    finally I would like to know if my computer falls under
    http://support.apple.com/kb/TS2377
    If nothing displays but you hear normal startup sounds, then it's possible this is a video issue, and you should take it to an Apple store or AASP.

  • Crystal report viewer do not show on client computer installation

    hi
    hope all you are fine
    i develop a simple project that show "Hello word My First Crystal Report" on crystal report viewer. after this i add new project "setup and deployment". In Setup Project I add 4 files of .msm for show crystal report.
    1. CRRuntime_13_0_tr.msm  2. Microsoft_VC100_ATL_x86.msm
    3. Microsoft_VC100_CRT_x86.msm
    4. Microsoft_VC100_MFC_x86.msm 5. Microsoft_VC100_OpenMP_x86.msm
    when i install on developer computer. it runs successfully. when i install on client computer, software runs fine but crystal report did not show and having error "METHOD NOT FOUND VOID CrystalDecision.WINDOWS.FORMS.CrystalREPORTViewer.SET_CACHEDPAGENUMBERPERDOC(INT32)"
    i install .net frame work and CRforVS_13_0_9.exe on client computer but .net frame work show form but crystal report did not show. 
    Please Help

    Hello,
    For Crystal repot related question ,please consult on SAP Crystal report forum instead of here.
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Movies are in List view and not showing in Movies view

    When I down load movies, they are appearing in the List view, but are not showing up in the Movies icon view.  How do I fix this?  I'm on iTunes 11.01.1

    Right mouse click on a Movie and select Get Info
    On the options Tab you probably have the value Home Video showing. Change it to Movie and the film will show up in the right place.
    It seems that iTunes assigns it to Home Movies when you import it unless it is explicitly tagged as movie or TV show etc

  • Month view does not show Multi Day events

    I know there has been a few post about this subject, but I've found no answer. Is there a fix for this problem? Multi Day events (Not All Day) only show up on the first day in month view (fine in week view). BUT ... if you print the month view the event shows on all the days, weird. I think I am going to be forced to go to a Microsoft product if this can't be resolved. I is too easy to double book appointments if you think that day is clear. Please help.

    I've just come across this most dangerous of flaws. I wonder how Apple staff manage multiple-day events without missing anything.
    I've submitted the following to iCal Feedback:
    http://www.apple.com/feedback/ical.html
    Events (not all-day) starting on one day and finishing on another do not show up properly in iCal month view. This is because you only show the start time, which is really confusing when trying to organise diaries.
    The iPhone month list view would be a model to sort this out, showing start time on the first day, "Ends" on the last day and "All Day" on intermediary days.
    Please sort this out as this is where Outlook really beats Mac.

  • View log not showing physical SQL generated in OBIEE 11.1.1.6.7

    Hi,
    I am currently using OBIEE 11.1.1.6.7 version. In this version I am unable to view the physical SQL generated by OBIEE under Administration --> Manage Marketing Jobs --> Select a Job --> Click on View SQL OR Administration --> Manage Sessions--> Select a Job --> Click on View SQL. It is not showing the physical SQL generated by OBIEE for a report or segment which I have executed.
    It was available in previous version i.e. OBIEE 10.1.3.4.2.
    I have searched in metalink and it has been suggested to use the following <Filters> section into instanceconfig.xml file. I have added the following details into existing instanceconfig.xml file and then restarted the BI services. Still the problem persist.
    <Filters>
    <!--This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware Control--><FilterRecord writerClassGroup="Console" path="saw" information="16" warning="31" error="31" trace="32" incident_error="1"/>
    <!--This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware Control--><FilterRecord writerClassGroup="File" path="saw" information="16" warning="31" error="31" trace="32" incident_error="1"/>
    <!--This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware Control--><FilterRecord writerClassGroup="Marketing" path="saw.mktgsqlsubsystem.joblog" information="16" warning="31" error="31" trace="32" incident_error="1"/>
    <!--This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware Control--><FilterRecord writerClassGroup="File" path="saw.httpserver.request" information="16" warning="31" error="31" trace="32" incident_error="1"/>
    <!--This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware Control--><FilterRecord writerClassGroup="File" path="saw.httpserver.response" information="16" warning="31" error="31" trace="32" incident_error="1"/>
    </Filters>
    Thanks,
    Prasanta

    Hi,
    Thanks for the reply.
    We used to view the log details (physical SQL) using Manage Marketing Jobs in OBIEE10g.
    In OBIEE11g we can see the job details and when selecting a job (under Action column Details link) there is an option in left pane as 'View Log'. If I click on 'View Log' it is showing as 'No Logs Found'.
    Just wanted to confirm if this is an issue in OBIEE11g.
    Also, I believe there is a limitation in 'Manage Session' to view the number of job details whereas in 'Manage Marketing Jobs' section we can increase the number of jobs to be displayed.
    Thanks,
    Prasanta

  • Crystal HTML viewer will not show embedded image from Infoview image store

    I am having an issue with the html and dhtml viewers not showing an image I have embedded inside a crystal report.  The image has been stored in infoview and embedded into the report from that source.  Using the Crystal ActiveX viewer works fine in this case and shows the image.  The html viewers however show the blank box with the red X in the top left corner when Internet explorer can't find an image.
    Now, if I right click on the image and get it's properties I get this URL:
    http://vsx2af0x/crystalreportviewers115/imagehandlerdotnetbridge.aspx?dynamicimage={B8FDE586-08D3-4A14-896C-0FE19AC3DB90}.png
    If I take that url and try to load it directly through Internet explorer I get the following error:
    Exception of type 'System.OutOfMemoryException' was thrown.
    The file is small and only about 20k in size.  If someone can help that would be greatly appreciated.
    Thanks

    Unfortunately I have been unable to remove the plug-in. The files is not locked, or shared, but my operating systems thinks it is.
    What happens, when you try?
    When I try to delete the plug-in from
         /Library/Application Support/Aperture/Plug-Ins/Google/Analog Efex Pro/
    with ⌘⌫, I simply get the pop-up panel to enter my administrator password, and the plug-in will be moved to the Trash:
    Don't forget to quit Aperture, before trying to remove the plug-in and to log off and on.

  • Table views/sprocs not showing in Data Source Explorer

    i have a database connection and is in good health.  the tree node for the database lists all of the folders expected, but only the Tables folder is populated with actual tables in the database.  the views and stored procedures are not showing even witht the filters disabled.  on the database i granted dbo rights to the user i am connecting with.  using flex builder 3, flex 3 and sql server 2000.

    Hi Himanshu
    Few fields does not work from particular table. you need to try different table for those fields. those fields could be arranged differently.
    This is neither configuration nor application issue.
    Also check your fields are from transparent table or not...

Maybe you are looking for