Color covering the whole pager when printing

My color laserjet 4600dn, the Magenta color cover the whole paper when printing, and some yellow color spots on the paper too. Is something wrong with the transfer belt? Please help!

Also, the best way to do this is not to adjust the black and white levels but to adjust the opacity of the image. You will need to make the background layer into a regular layer (double click it in the layers palette and say yes to the dialogs), then use the opacity slider to lighten it.
Or alternatively you could add multiply layers till you reach the required lightness, then flatten the image.

Similar Messages

P1006 printing problem, covering the whole page

I just bought new p1006 printer. Problem is that the whole page is covered (the page is not white - it is gray). The text is ok, but.
I've tried reinstaling Windows, didn't help. Tried to print from live Ubuntu, didn't print anything (Detected the printer fine. But you try to print something, doesn't report any error and doesn't print anything.).
The printer is defective? Toner cartrige defective? Something else?

If you writing you input parameters in TOP_OF_PAGE system will considered that as header area. so that portion will not comes under scrolling.
As standard practice usually input values will be displayed at end of the report.
a®

HP Laserjet P3015 double sided - the last odd page prints on the same page when printing two copies

HP Laserjet P3015 double sided printing is set up on Windows 7. When printing two copies of a document, if it has odd number of pages, the last page is printed on both sides of the page. There is no page feed for the last page.
Suppose say there are 3 pages in a document and you want to print two copies. It prints like 1/2, 1/2 and 3/3. The third page (odd number) print on the same page. The last page page does not print on two pages.
It works alright on Windows XP.

Hope that you have configured the correct paper type and size in the printer hardware and also selecting the same paper tray, size, type from the printer driver while printing.
It may be caused due to the job formatting done by the application software or some jobs settings done from the job/application or printer driver. Check by toggling the 'collate' option and also try to print from a different application software.
Please mark the post that solves your problem as Accepted Solution
Click the 'Kudos Thumbs Up' if this was helpful. Thank You!
(Although I am an HP employee, I am speaking for myself and not for HP)

How to hide the cover page when printing ?

Dear all,
I would like to change printings option for the report S_ALR_87013611.
I would like to hide the cover page (with parameter) when printing.
How can I do that ?
Thanks for your help
Best regards

Hi,
Do you mean the part of the report, which contains the report name, selection date, controlling area,
Fiscal year, and other selection data?
If yes, then you could proceed as follows: As the 1SIP-001 (S_ALR_87013611) is a standard report, please copy this report with name in the customer naming range and then delete the title page from the copied report as follows:
1. Call GRR2, in the library 1VK place the cursor on report 1SIP-001 and click on the icon 'Copy'
2. In the 'To report' field enter (for example) ZSIP-001 and press 'Enter'
3. Now double-click on ZSIP-001 to enter the report definition.
4. Under 'Extras' -> 'Report texts' -> 'Title page' call the title page.
5. Choose 'Text' -> 'Delete' and the title page lines are removed.
6. Click on the 'Save' icon to save this.
7. Assign the report to a new report group by choosing 'Environment'
-> 'Assign report group' from the menu and enter ZSIP in the popup,
confirming the next popup that the report group should be created.
Now call txn GR55 and execute report group ZSIP with your selection
criteria and follow the steps to print the report:
- click 'printer icon' - mouseover text 'Print (ctrl+P)'
- click OK with dot in 'current report'
- click OK with dot in 'Print formatted report (page length 59)
- on print parameter screen in menu, blank the 'SAP cover page' field.
Regards,
Greta

I can no longer see my bookmarks or firefox screen. a bing search box covers the whole page

i used to be able to use mozilla but now it seems disabled on my desktop eventhough i downloaded the new edition.

Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Header covering the whole page

hi i am displaying the input parameters , to be displayed on the top of the report,
but its taking away more than half afthe page,
and when i am scrolling the report , we could only see the 40% of the total report.

If you writing you input parameters in TOP_OF_PAGE system will considered that as header area. so that portion will not comes under scrolling.
As standard practice usually input values will be displayed at end of the report.
a®

Downloaded pictures from e-mail. It covers the whole screen. How do I get back to e-mails?

I downloaded pictures on my new I-Pad 2 from email. It covers the whole page. How do I get back to my e-mails?

Double click the Home buttom (bottom button) and it will bring up recent app activity. Then, just click the Mail icon.

When I AirPrint it only does small portions of the page. How do I get it to print the whole page?

When I AirPrint The printer only prints a portion of the page. How do I get it to print the whole page.

It would help if you stated what printer you are using and what application you are doing the printing from. Also, what are you printing?

My pictures don't fill the whole 4 x 6 page when printing

We have a cannon pixma printer and know when I try to print my pictures on a 4 x 6 page they don't fill the whole page I have taken border off. Please help

What is the number of pixels (width and height) in your image?
How much of the page is filled? (please measure it with a ruler)

What do I do when my printer will not print the whole page of something I wirelessly send to print

What exactly do I need to do when my printer will not print the whole page of a job i send to it wireless?

hi there,
could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Printing problem when adding a button to print the whole page

Hello,
I added a button with printing option = Apply to self, Print = page.
The result is that it prints only the i-view in which the button is located. I want the whole page to be printed. The page is composed of several i-views and I also use layers.
Has someone an idea ?
Thanks a lot,
Thomas

Hi Thomas,
I received exact the same problem case during our visual composer developments. On SPS 14 the print functionality worked as expected with the print option u201Cprint pageu201D. After the implementation of SPS 16 we had to use u201Cprint screenu201D.
Hopes this helps.
Best regards
RB

Can't print a graph on the whole page in landscape

Hello!
I have XY graph that I want to print on the whole page in landscape orientation (paper A4).
On the screen the graph is small, so I do resizing, appending image to report, and then printing.
After sending it to the printer I get preview (from the printer software) and see that the graph uses only approx. 5/6 of the page in the width, in other words the height of the graph takes the whole height of the page (21 cm) and the width of the graph leaves 5 cm of the page unused.
I tried to change the width and the height of the plot area to get proper ratio, but in vain.
If I set the height of the graph too large it goes beyond the page, but whatever I write to the width I always get 5 cm of the page unused on the right side. (not including 1 cm of the margin).
Note: surely, if you set small width you can get more space of the page unused, I'm talking about increasing the width of the graph.
Any ideas?
See attached for the vi. I tried to save it for 7.1 version but it can't, so you'll need LabView 8.0 to check it.
Also in attached you can find the page preview I get before it goes to printer.
Thanks in advance.
Rashid.
Using LV 8.0 Pro on WinXP with printer Canon PIXMA iP1000 (also tested on HP printer, but I think it doesn't matter).Message Edited by Rashid on 06-06-2006 07:09 AM
Attachments:
Graph printing out.vi ‏40 KB
Report preview.png ‏48 KB

Rashid,
It could be that you would need to install the entire LabVIEW 8.0.1 update rather than just the updated Run-Time Engine (RTE). Here is a link to the 8.0.1 update. If you download and install this version, you can then use the utility to mass compile or compile when you are prompted.
Repost if you have more questions!
Andy F.
National Instruments

How do I stop it printing 1/6 (bottom RH corner) of page 6 times instead of printing the whole page?

When I print a PDF downloaded from the internet it chops the bottom RH corner of the page and reproduces it 6x (2x across the page and 3x down the page), instead of printing the whole page, this is driving me mad, does anyone know how to stop it? I have ticked Print as Image and Multiple Pages is NOT selected....

suzbat,
I have ticked Print as Image and Multiple Pages is NOT selected....
Are you using the desktop version of Adobe Reader on a Mac computer? What is the version of your Adobe Reader?
You posted the question on the Adobe Reader for iOS forum. But Adobe Reader for iOS does not offer the print options like "Print as Image", "Multiple Pages".

Not printing the whole page

the printer is not printing the whole page it is cutting the right side
hp photosmart 7520

My HP Photosmart model 5520 is only printing part of a page.

Adobe Reader 11.0.09 on MAC prints PDFs 1/6 of page 6 times on page, instead of the whole page. Help please!!

I am using Mac OS X 10.9.5 and Adobe Reader 11.0.09 and it prints PDFs 1/6 of page 6 times on page, instead of the whole page. I have tried Print as Image, no joy. Multiple pages is NOT selected. I cannot get anyone from Adobe to help me with this problem and it is becoming a major impediment to my work!

Hi Suzbat,
If you try to print any other document from any other application. Did you check, are you facing the same issue or not?
Have you tried to install latest drivers of the printer.
Regards,
Ajlan Huda.

Color covering the whole pager when printing

Similar Messages

Maybe you are looking for