Color distortion when dragging to new page

I have a book template that I am using to make albums. For the first time in photoshop, I am experiencing color changing when I drag my original picture onto the template. I have checked and made sure that the color settings were the same and they are both set to RGB/8. My original picture (from my camerea, then tweaked in photoshop) is bright and vibrant. When I drag my picture to the template it becomes dull with a green/grey tint over the picture. Weird thing is, if I create a new document and paste the template into it and then drag my pictures, the pictures look fine. The template is still dull though. There has to be something in the temaplte itself that I am missing. Can anyone help, please!!!
Thanks
Terez

tangoparty wrote:
I have checked and made sure that the color settings were the same and they are both set to RGB/8.
I tend to disagree. Sounds very much like there is a color profile attached to the template that in no way matches your current color information. Most commonly this happens, when you assign your monitor profile as the document profile instead of just using it for proof preview...
Mylenium

Similar Messages

Changing the starting line when printing on new page.

I am using Reports 6i. I have a report with a master/detail ralationship. The columns from the master query prints once only at the beginning of the report followed by numerous detail lines. However, should the detail lines continue printing onto a new page .... I would like to specify a particular position to start the print.eg 5 or perhaps 7 line from the top. Can this be done in reports 6i. Thanx in advance!

Reports allows you to position the objects anywhere you want on the page. The only reason that objects move up the page is because they are anchored to objects above them. When those objects don't print, the objects that come after move up.
You can create an object that prints on all pages but has no line and no fill color. This can then be used to reduce the amount the master frame can shrink by. (Make sure it prints on all pages. You might need to create seperate frames to surround the fields you want to see and the transparent field - then another to surround them both).
If you know the position that you want the details to print then you can position the detail objects in the appropriate location and change the properties against the frame that surrounds he detail section as follows:
"Base Printing On" to "Enclosing Object"
"Print Object On" to "All Pages"
Alternatively, create an explicit anchor between the frame and the top of the report.
Finally, if you want to parameterise the position of the detail records, you need to create field that dynamically re-sizes to push everything below it down by the required amount.
- create a field object that is at the same level as the master objects
- set the "print object on" propert to "All but First Page"
- set the source of the field to something like "desformat".
- then use the srw.set_field_char(0, "<some text with a number of returns>"); in the format trigger
This allows you to push everything below the field down by any desired amount.

How do I make it so my client can edit Links in business catalyst when they create new pages?

Okay so essentially I have built a site in Muse uploaded to business catalyst and I've setup a site template so that the client can create new pages as each new course arrives, but how do I get the link from the homepage to link to the new page? basically I need the link to be editable.
What would be ideal is a kind of portfolio layout where there is a thumbnail and a new page but for my client to be able to add a new project adn it would create a thumbnail on the homepage and a new page that he can edit. Does anyone know of something like that possible in Business catalyst?

Hi
Editing with Business Catalyst only works with image or text editing , we cannot add new page or page items using in browser editing.
However, you can manage the site from BC end when your client and login to admin and add pages, modify etc, but if you re-publish the site from Muse then then changes will be overwritten.
Thanks,
Sanjit

Preview Icons vanishing when dragged into new folder.

When dragging an image file (with a preview icon showing the small representation of that image) is dragged from it's original folder to a new one, the preview disappears and is replaced with a generic "EPS" or "Jpeg" grey icon. Futher, if I get information about the file, the preview picture of the image also shows just a generic file type icon, even though I can see clearly the preview icon. This is so frustrating, as I must then batch process images in photoshop to have a new preview image show up.
To make things even more annoying, the process is inconsistent. If I drag the a eps file from the original folder with the image preview into a new folder, the preview may be missing. If I drag and drag, creating multiple copies of the file in a new folder "hnuewf.eps 1, .2, .3 etc...) almost always one of these attempts will copy correctly, with the preview intact. What the heck is going on!

Partilly solved by rebuilding permissions....

Why does Fiefox require me to click allow when opening a new page?

When I try to open a new page, Firefox requires that I click the "allow" button below the toolbar in order to proceed. This is new (within the last few weeks).

This?
See: [http://kb.mozillazine.org/Menu_differences Firefox > Preferences] > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
* [[Options window - Advanced panel#General_tab]]
See also: http://kb.mozillazine.org/accessibility.blockautorefresh

Transparency Color Distortion When Printing

I have designed something in InDesign and included in the template is a transparency that I created in Photoshop. It looks fine on the screen, but when I print the area that is transparent has color distortion. I have a host-based laser printer. Is there anything I can do to correct this using my current setup? Is this where I would somehow make use of the transparency flattener presets? If so, how exactly does that work?

Without seeing the distortion I'm only guessing, but it sounds like it may be YDB. See InDesignSecrets » Blog Archive » Eliminating YDB (Yucky Discolored Box) Syndrome

When i open new page, it has the outline of a selection i made a few pages ago

this is what i see when i open a new page. it is part of a selection i made a few pages back. i can delete it and use another, blank layer, but when i "fill" the layer, this is what it is filled with. relatively familiar with photoshop basics, have never come across this. input welcomed.
madeleine

Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
Please read these and proceed accordingly:
http://forums.adobe.com/thread/419981?tstart=0
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

No data found exception when calling a new page from existing page

hi i have a screen which has a delivery id and i am calling a new page with a different view object and a application module.I need to pass this delivery id in the main page to the view object query in the second page.
i have defined the second page view object with the following query
select country,address1,address2,address3,address4,city from hz_locations where location_id=
(select ultimate_dropoff_location_id from wsh_new_deliveries where delivery_id=:1)
what i want is to pass the delivery id in the main page to :1 in this query.
i have written the following CO code for the second page
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
String eventaction=pageContext.getParameter("xxsaneventname");
String paramval=pageContext.getParameter("xxsanparamvalue1");
OAApplicationModule deliverydetailam = pageContext.getApplicationModule(webBean);
Serializable personParamList[]= {eventaction,paramval};
if ( eventaction!=null && eventaction.equals("viewdelivery"))
deliverydetailam.invokeMethod("getdetailsmethod", personParamList);
i have written the getdetailsmethod in the application module impl
public void getdetailsmethod( String pAction, String pdeliveryId)
try
OAViewObjectImpl pervo = getWshDeliveryDetailsVO1();
String existingWhereClause = pervo.getWhereClause() ;
System.out.println(existingWhereClause);
pervo.setWhereClauseParams(null);
pervo.setWhereClause("delivery_id = :1");
pervo.setWhereClauseParam(0, new Number(pdeliveryId));
pervo.executeQuery();
pervo.setWhereClauseParams(null);
//pervo.setWhereClause(existingWhereClause);
catch(Exception exception1)
throw OAException.wrapperException(exception1);
can some body please help me to correct this one.
the exception i got is
oracle.apps.fnd.framework.OAException: No data found for region (/xxt/oracle/apps/AK/om/webui/deliverydetailpg).

Provide the complete error stack.
From the current error line it shows that your custom region/page /xxt/oracle/apps/AK/om/webui/deliverydetailpg is not present in the MDS. Did you use xmlimport to set the page xml into MDS? If yes, use jdr_utils package to confirm it is present at the right location.
--Shiv

Firefox freezes when I load new pages into new tabs. This started a few weeks ago after I downloaded the latest update to firefox, currently running 7.0.1

After installing the latest update to Firefox a couple of weeks ago, loading new pages into new tabs takes a very very long time IF the page loads at all. I usually have to close the original tab to get the new tabs to load their pages. Sometimes I have to close all Firefox windows and start over to get the page I want to load.
This only started after downloading and installing this new update. I had no problem with new pages/tabs with previous versions.
I have rebooted, run full scans with Spyware Doctor, Malwarebytes and McAfee without solving the problem.

Look the SOLUTION CHOSEN:
https://support.mozilla.com/en-US/questions/882621
and ''John99'' reply down the chosen solution.
thank you

Image resizes when dragged to new window

All my images change size when I move them to a new window. I am making numerous graphics that need to be exact for collage like purposes; I will work them in their own window and will drag the finished images to a separate window to print(graphics are small, and I want to fill a print page with as many as possible) My issue is that whenever I drag the images to the new window they re size, usually larger. The new window is the same size as old. This is also happening when I print but image will be smaller than what is seen in image size dialog box. Please advise. Thank you

I assume that you are working with Elements v.3 or v.4.
In order to avoid a major size disparity as you describe in making a collage, have the resolution of the canvas and the picture files the same. For example, go to File>New>Blank file and establish width, height, and resolution. Click ok. For printing, it is desirable to have resolution 240-300px/in.
Next set the resolution of the picture files to a similar value. You may have to resample in order to achieve this. Minor degrees of size adjustment in the collage can be achieved via the handles in the move tool. Note that each picture file will be on its own layer, allowing for this type of adjustment readily.
Feel free to repost if you have additional problems as you go on with your project.
Ken

Why are my photos jarbled/color-distorted when I pull them into Photoshop?

DETAILS:
I'm using Photoshop CC 2014.
Photos were captured on my iPhone 5 and captured through Image Capture.
PROBLEM:
I dragged two photos into a Photoshop file. The first one imported fine. The second one came in distorted (see below). It seems to be a corrupted version of the first photo I dragged in, that is underneath it. When I saw the problem, I deleted the corrupted photo layer and tried to drag it in again, and it did the same thing.
Then I realized I really liked the effect it was creating. Every time I would transform (command T) the corrupted layer, it would redistort, with different patterns and colors (see below). I kept doing it, trying to create different patterns.
Eventually, the photo imported correctly, and I couldn't get the issue to reoccur.
QUESTION:
How can I recreate this effect? Is there a way to corrupt/distort the colors like this intentionally?

Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go.

Strange lines are apearing when I open new page in new tab. They are on white page (new tab) before page I wanted shows up.

hey are on white surface before page I wanted shows up. They are also sometimes beetween my bookmarks on bookmark toolbar, sometimes they are on the new tab (where the name of the tab is)

You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Photoshop CS5 crashes when dragging a new layer

I was searching the forum for similar problems, but non of the threads had a solution (except uninstalling and installing again PS CS5 or even worse - formatting my PC).
I must say that this problem is quite new. PS was working flawlessly for a few months. It crashes when I paste a new layer and drag it.
These are my specs:
* HP Pavilion 9750ej
* Nvidia GeForce 8400M GS with the latest driver 266.58 (I uninstalled the previous one, and had a clean install of the new driver)
* 2GB RAM
* 11.7GB of FREE SPACE on 320GB HDD (I know it's not much, but it shouldn't cause PS to crash, especially when I'm working with low-res pics)
I don't know how to create a crash-log, but I would attach if you could tell me how, and if it's needed.
Thanks!

You haven't said what version of Windows you're running.
You don't need to do anything special to create a crash log; all versions of Windows keep this information already in logs. These logs typically keep information a long time, possibly all the way back to your installation of Windows.
What you want to do is to get into the Windows Event Viewer. On a modern system you can hit Start then type event log into the search box, then when View event logs comes up, click it.
A Photoshop crash will be in the Windows Logs - Application section as an Application Error.
You'll want to copy the textual description, which should include the Faulting module, and paste it here. Usually the Faulting module tells us what part of your system is failing.
-Noel

Help! Photoshop edited jpg color distorts when imported into Muse

Okay, so I am trying to build a photography webpage (among others) and I edit most of my photos in photoshop. All photos that I edit in photoshop and save to jpg, look great when printed, uploaded to facebook, etc. however when I import them into Adobe Muse for and put them on my webpage, the colors of the photos become desaturated and/or slightly distorted (so that they look dull). When I edit images in lightroom and save them as jpg and import them into Muse, they look fine, but colors edited in photoshop seem to mess up my photos when imported into Muse.
What am I doing wrong?!
Susan

You are using some odd color management settings and not converting to sRGB most likely... Check your settings in PS itself and the Save for Web dialog and experiment around.
Mylenium

What does Elastic, Liquid, or Hybrid Mean when creating a new page

When I choose File-New-blank page I get choices on the number of columns with the words elastic, liquid, and hybrid. I'm not sure which to pick for which use. Are these terms defined or documented so I can pick the one I need.
New-ish DW-CS4 user running Win XP Pro.
Thanks,
Steve

Just so you know, starter pages are pre-built CSS layouts. Not the same as Dreamweaver Templates (
.dwt files).
Use this link, they're newer
New DW Starter Pages --
http://www.adobe.com/devnet/dreamweaver/articles/introducing_new_css_layouts.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Color distortion when dragging to new page

Similar Messages

Maybe you are looking for