Color for links, lines around photo's.. color trouble.

I must have changed something, somehow because this never happened in the past couple of weeks I've been playing with iWeb.
Now I started a new website and dropped in pictures and such. I drop in a couple of photos and when I go to try and change the line color around them.. I click on the line color box in inspector and it opens the color box. But regardless which color I choose, the line stays black. I tried it with rgb, the crayons, and again regardless of what I pick it doesn't change the color from black in inspector and of course doesn't change in in the design window.
Now the same is true for links. I highlight some text to link and put in the email address click the "format" part of the link thing in inspector and when I click on the color thing to change the color its a dark brown. I don't want it dark brown for my links. But again even though it opens the color box and even though I pick a color, it won't change it in inspector and it won't change it for my link.
What am I doing wrong?
Thanks, Susan

http://discussions.apple.com/thread.jspa?messageID=9656302&#9656302

Similar Messages

What is causing white lines around photos in Muse?

Some of my photos are showing up on the preview with thin white lines at the bottom or side. Lines don't show up in the originals in design. Also checked box for no stroke around photo? Any ideas how to remove it?

As soon as you flatten do you see the problem in Illustrator, or after you make a .pdf?
Is that a soft drop shadow on the S, what happens if you temporarily remove the shadow?
What setting do you have for document setup >> transparency? Do you have any blending modes assigned?
So you have both CS6 & CC, did this happen before the cash cow was installed? I would say so turn off smoothing in Acrobat as in my initial screenshot, but you say that this happens even in other non pdf formats. Try resetting your preferences, this looks like a tranparency flattening issue.

Setting color codes for more than one photo at a time

Is there any way to set color codes for more than one photo at a time?

Hi John,
I will look at keywords. My issue is speed. Right now I am culling and editing an event shoot that spanned a week with 35 separate events and more than 5000 images. So I use the fastest most convenient method I can and it still takes a long time to have a completed and final shoot. On this shoot I will end up with a final set of around 1500 images. Right now I am finishing processing a show that will hang in the Deutsches Amerikanish Zentrum in Stuttgart.
As I am sure you are aware by now, having seen enough of my inane questions that over the last two years or since Lightroom version 1.xx if I could not figure out how to do something I skipped it. So many things in Lightroom are buried and unless you have a mind like a steel trap (and think that some of you guys in the forum do) locating how to do something is not obvious.
For example, I only learned (in the last hour) that I could assign colors as a group of selections by using Shift + number. I found this in a side head in Martin Evenings Lightroom book. I still do not know how to find a way to display the color filter "selection" set in Library mode. Is there a way?
To top it off, Stuttgart Media University asked me if I would add a Lightroom module to my schedule this year. Now I have a compelling reason to learn all those missing pieces that I have created workarounds for. Hence the number of posts you have been seeing from me over the past few of weeks.
I tell my class that there are no such things as stupid questions, only questions. Now I am practicing what I have been preaching for the last gazillion years. Guys like you have been great.
My workflow is
1. I first separate all images by event. I do that at the time of import.
2. I do a fast pass rejecting all the obviously bad images
3. I do a second pass grouping the images by sub-group (speeches, people talking, performances, etc.) This is where I run out of selection methods and your key-wording could work but it would probably take too much time to establish a keyword set for a single event. Where I have more than five subgroups I set up different collection sets with one collection for each sub group. However I would like to keep a single event in one collection.
4. I then select the images to be used by color code.
5. Next I process the final images (crop develop etc) by collection.
6. Last I output the set according to client requirement.
If you have a better workflow, I am all ears.
By the way, what is your photo specialty and where are you located?
Jim

How to place black (or colored) frames around photos

Hi,
I am a novice at PS. What is the easiest way to create thin or thick black (or colored) framing around photos that have been cut from an original image? I am making a photo collage and want each image on the easel to have its own individual frame.
Can you please help? Any assistance will be much appreciated.
Thank you,
John S.
Burlingame, CA

Dear C. Pfaffenbichler:
Thank you very much. It works great! I have now learned a new technique. Your help is much appreciated.
Regards,
John
Burlingame, CA

How to automatically build a table with 2 alternated font colors for the lines ?

Hi,
I'm looking for a way to automatically build a table with alternate background color and alternate font color for the lines.
I have this particular project (a list of companies of an industrial area) and it is updated twice a year :
I managed to set an automated alternate background color of the lines so this works well (white/blue/white/blue...)
But the font color does not automatically alternates... and I do not know how to set this up...
All the companies are ordered alphabetically so when I have to insert or delete one, the whole text of the table under the modified line is messed up. Then I have unreadable white text on white background and blue text on blue background...
Does anyone have an idea on how to automatically alternate the font color ?
Thank you.
Best regards,
G.

Hi,
I know this [JS] code is awful but it works. If someone wants to correct it …!
At the beginning, you have an Excel file. You play a little with it [doing concatenations] to get, after importing it in ID:
Then, just run the .jsx:
Done!

How to set line style to be underline for links using PDLinkAnnotSetBorder

Hello,
I want to set link line style to be underline. am not finding any difference for solid and underline except cosname of S (BS) is U or S
Please anyone tells me how to change the link line style to be underline.
Thanks,
Sow

Thanks for reply.
I am using code as show below to change line style to solid and dashed.
PDLinkAnnotBorder pdLinkBorder;
PDLinkAnnotGetBorder( rpdAnnot, &pdLinkBorder);
//For solid
pdLinkBorder.dashArrayLen = 0;
PDLinkAnnotSetBorder( rpdAnnot, &pdLinkBorder);
//For dashed
pdLinkBorder.dashArrayLen = 1;
for( int iIndex = 0; iIndex < PDAnnotMaxDashes; iIndex++)
{ ASInt32 iThickness = 3;
pdLinkBorder.dashArray[iIndex] = Int32ToFixed( iThickness );
PDLinkAnnotSetBorder( rpdAnnot, &pdLinkBorder);
how should I do for underline. If am using cosobject how to change line style to underline using cosobject
Please let me know.
Thanks,
Sow

DW8-Fine white line around images

DW8 - On some of my images there is a very fine white line
around the edge when the site is previewed in the browser. The site
has an almost-black background color (181714), and I use the same
color in making the image backgrounds (in Photoshop CS), for
example roll-over images. How do I get rid of this?

You wouldn't set this in the Property inspector, you'd set it
in the CSS,
and the only time you need it would be when the image is
within a link:
a img { border:none; }
Also, you wouldn't expect this effect to produce a white
border - it would
be a blue one (by default).
I'm guessing the fine white line is part of the image (it's
easy to
undercrop when the canvas is white).
> I've noticed
> that in tables, having nothing there is "bigger" than
specifying a zero.
If you have nothing there, you will get the default value for
the all of the
table attributes, which is often (but not always) not zero.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Damaeus" <[email protected]> wrote in
message
news:[email protected]..
> Reading from news:macromedia.dreamweaver,
> "Fugasi" <[email protected]> posted:
>
>> DW8 - On some of my images there is a very fine
white line around the
>> edge when
>> the site is previewed in the browser. The site has
an almost-black
>> background
>> color (181714), and I use the same color in making
the image backgrounds
>> (in
>> Photoshop CS), for example roll-over images. How do
I get rid of this?
>
> Check to make sure that your image border is zero in the
Properties
> Inspector in Dreamweaver for the specific image in
question. I've noticed
> that in tables, having nothing there is "bigger" than
specifying a zero.
> I
> don't think I get a white border around images with
nothing in the image
> border width setting, but see if that works?
>
> Damaeus

Whats the easiest way to put a thin line around an image?

Can anyone tell me the easiest way to put a thin line around
an image? I'm also interested in the use of thin lines as part of
the graphic design on a page, how are they generated?
Thanks

.oO(cdeatherage)
>In Dreamweaver, you can set a border for each image but
be aware that some
>versions of some browsers may not display it.
This shouldn't be an issue in any used browser today.
>If it is a consistent look you're
>after, I'd say the most permanent thing to do would be to
edit the image in
>Photoshop or Fireworks. In Photoshop, e.g, I'd create a
background fill with
>the color I wanted the border, then add the image,
centered, in a new layer on
>top of that. Merge the layers, then save optimized for
the web.
Way too complicated. If you want to change the color or style
of the
border, you have to modify the image. With CSS you can
directly change
the line style in a much easier and faster way.
Micha

Need to add a cut line around text with a stroke

This has been driving me nuts for years and I've often found ways to "kind of" accomplish this, but I figured someone here might be able to help.
Create text, convert to outlines, add a stroke. Ok now I want to add a cut line around that entire thing so it's dye-cut out on vinyl. My cut line is just a stroke with a color defined in my pallet. I can create 2 strokes, but I can't figure out how to get one to go to the edge of the other. I also tried duplicating the image, creating just an outline, but it's impossible to get it exactly outlined by hand.
If I'm not explaining this right, please let me know.
So there I have the text, converted to outlines, white fill and gold stroke. I need to be able to dye-cut this. If you add a new stroke, it's on top of the old one. Basically I want to add a stroke, to the stroke, but only the outside.
Thanks in advance!!

Thank you Larry. I kind of followed what you said but I think there's some steps missing here?
I'm glad you showed me how to create additional strokes without creating outlines, I was never clicking above "character", I had to click above it to add a new stroke, if you have the text selected, it's greyed out.
Ok so I created a new stroke, then selected it, went to FX > Path > Offset Path. I chose 0.02 (closest I could seem to get, but not perfect, ok in some areas, bad in others), miter joins set to 4? Are those the same settings you used? You didn't tell me how much you offset yours. Then I selected the offset path stroke and went object > expand apperance, but it didn't seem to do anything? It just removed the offset path FX option on the stroke? This is where I'm pretty confused. Why even do the step after the offset, couldn't I just stop there and print?
After adding a stroke and offsetting
After selecting Object > Expand appearance.
As you can see, like on the C. There is a gap between the cut line and the stroke at the top, but there's no gap on the left side, but there is on the right, and there is on the bottom as well? If I printed this, I would get white fill, gold stroke, and then another white stroke basically.
Thank you for your patience, I'm self-taught but over the last 4 years of using it every day I'm still learning new tricks!

Thin white line around image

Using CS3 with Vista. I have a postcard that has a background image on the bottom layer, another (overlapping) image in the next layer, and type on the top layer. The image on the middle layer is showing very minor white edges (stitching (?) I guess) around parts of it. It also printed with this same slight, white jagged edge. This middle image has an effective resolution of 300 ppi. I read in Knowledgebase about turning off anti-aliasing but when I do it still shows this white edge on screen and the type seems to marginally get slightly jagged. It was so minor that the client was fine with it but I am curious as to what was causing it and if it's something I can remedy in the future.
Any thoughts would be appreciated. Thanks.
Gordon

Gordon has sent me his original files, and there are a couple of issues.
The first is with the background image, a 400 x 400 pixel jpeg that's been stretched to fit the rectangular sahpe, and then made 50% opaque. The effective resolution is 97 x 60 ppi, which as a ghosted background is probably marginally usable, particularly if printed on digital equipment, but is hardly optimal. I'd personally do the opacity reduction in Photoshop and save a new flattened version as a .psd for use in a background because it reduces the complexity of the file, but there's no rule that says one must do things that way. I simply prefer to use transparency only when it is required to achieve the effect.
The larger issue is with the middle image, which is a transparent .gif of a glass with a margarita. This is 1238 x 1667 pixels and has an effective resolution of 349 ppi, more than adequate for print, but it looks to me as if it was up-sampled at some point from a web image (not unlikely since it's a .gif) as the image is made of obvious square blocks that look like the original index color pixels -- a classic example of why you can't simply take a small image and upsample for print. Around the stem of the glass are a large number of white pixels left behind when the image was removed from its original background, which are showing as the faint white lines he described. These pixels could be removed using a detect edges clipping path in ID, but doing so leaves a very jagged edge. A drawn path in Photoshop is much cleaner, but the pixels in the rest of the image are still readily apparent and the image probably isn't really worth the effort to repair if a better quality can be found to begin with.

Dashed line around iCal appointment

I have seen this posted in several areas but no solution to be found as of yet. SOMETIMES when I create an appointment in iCal, I get a clear background with a white dotted line around the appointment.
Each time I create an appointment, I invite my wife. I always get a yellow exclamation point before her name (or any name/email I use for invite). SOME appointments have a man with a question mark in the upper right hand corner (these are the ones that have the clear background and dashed line)...
When I create an appointment, invite my wife, one of three things happen:
1) the appointment is created in the appropriate calendar, invitation is sent and I am done. I do not need to wait for her to accept the appointent.
2) the appointment is created, clear background, dashed lines, little man with question mark in upper right hand corner, invitation sent. When she accepts, the color for the calendar fills the appointment and the dashed line is removed.
3) the appointment is created, clear background, dashed lines, little man with question mark in upper right hand corner, invitation IS NOT sent.
HELP! This is frustrating...

Greetings,
The events where the dotted outline and the little man appear, are they part of a calendar in the "ON MY MAC" section of the iCal sidebar on the left hand side or a different section?

Blue line around active boxes disappears, cannot figure out why....

Hi ... hope you can help me with this, it's a minor irritation but it's driving me nuts. I'm writing a report that has several boxes with imported graphics in it.
The active boxes have a light blue line around it, with tiny clear boxes in the corners and side mid-points. I can drag any of those tiny boxes to resize the image, or use the metrics inspector to enter the dimensions numerically. But sometimes, when I make the boxes larger, the blue line around the active box disappears.
Those blue lines lining the active box are useful for aligning the graphics boxes, so it would be nice if they stopped disappearing on me.
Anyone know why that happens?
Thanks!
shireen,
new to iWorks

I don't have any troubles selecting and aligning text boxes and graphics since I stopped sending them all the way to the back (arrange menu/send to back). There are times when you want them back there but most of the time you don't. Pages uses layers and one of the layers is the default text layer. Anything behind this text layer is difficult to select.
You can select items behind the text layer by clicking in the area outside the margins and drag the pointer over to the graphic without releasing the mouse. If you use the 'send backward' command the object still remains easy to select.
Some objects that have transparent areas (PDF's created from eps files for example) can only be selected by the click and drag method described above or by carefully positioning the pointer over a black or colored area until the pointer turns from a cursor to a pointer.
Kurt

Linking lines on a graph with missing data

Hi
I am trying to produce line charts for a series of events. The way it will work is there are 15 days, and measurements are taken at uneven intervals, such as day 1, 2, 3, 7, 12, 13, 14. When I plot these, the line links the plot marks where they are just a day apart, like 1,2,3, leave a dot for 7 and then have a line between 13 and 14. How do I link the line so it can jump the days without any measured data?
Thank you in advance.
Stuart

What you are describing is what happens when you have empty rows in your data series. Numbers does not have the option of connecting points across a gap.
If you use a line chart (not the scatter chart), you can create a new series in your table that interpolates the missing points. Plot it as a second series with the same line color but no data points. Interpolation across a one row gap is easy to do. Interpolation across several rows is easy to do. Interpolation across a gap that might be one row or might be more is hard to do with a formula that works regardless of the size of the gap (I cannot think of a formula to do it off-hand).
If you use a scatter chart, you can use Reorganize to hide all rows where the Y data is blank. The remaining rows of data will plot and the dots will all be connected. If you don't want to hide rows in your data table, you can create a separate table that pulls in the data. Use that table for your chart, showing only rows that have Y data.
Note that you can use Reorganize for a line chart too but it will not plot the hidden X categories.

Is there any way of disappearing those lines around objects on Muse?

When i'm designin on muse, every object have this line around it, like it was selected, but it's not, also the line have the color of the leyer where it is. Can i ride off this lines? all becomes full of lines and confuse when the design is "on the road". tnx!

Hello,
You can get rid of them for going to View > Hide Frame Edges
Regards
Vivek

Sharepoint 2013 - Search for link names on a single page

Hi
I am messing around with SP13 and trying to get my search result web part to only search for link names and display all results.
I have created the search source to point at the sub site. If I search for part of a link name it will list all links in one long row as a single result.
Example: One single page contains all links. Each link points to a .aspx page. The search source is pointing at this page and it can display results but only as a single result containing all links as one line of text.
Say I have 1000+ links of which 50 has names such as Link1-Item1-Basket1, Link1-Item1-Basket2 up to Link1-Item1-Basket50.
When I search for Link1-Item1 I would like my search results to display 50 results as 50 individual links.
Is this possible?

Hi,
Yes, you can format the search results as you expected. But you have to create a custom display template to format your results such as extract the links from each results and display it as separate link.
Once display template created you have to map the display template to your search results web part.
Please refer to the following articles.
SharePoint 2013 Customize Display Template for Content By Search Web
Part (CSWP) Part-1
Introduction to SharePoint 2013 Display Templates
Display Template Overview
Please mark it answered, if your problem resolved.

Color for links, lines around photo's.. color trouble.

Similar Messages

Maybe you are looking for